Texas Instruments

DP83902AVLJ - 5V Serial Network Controller | Texas Instruments

Name: DP83902AVLJ - 5V Serial Network Controller | Texas Instruments
Brand: Texas Instruments
SKU: DP83902AVLJ

MPN: DP83902AVLJ ✗ Akhir Hidup

4.75 V to 5.25 V Vdss 140 mA Id 100-BFQFP Package

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

DP83902AVLJ Ringkasan

The Texas Instruments DP83902AVLJ is a serial network interface controller for twisted-pair networks, supplied in a 100-lead rectangular QFP package and operating from a 4.75 V to 5.25 V supply. Its listed characteristics include a serial interface, approximately 140 mA supply current, commercial temperature grade, and tray packaging. The device is described by Texas Instruments as an ST-NIC serial network interface controller and is categorized as an obsolete interface controller.

A serial network interface controller is an integrated circuit that manages the communication path between a computer or embedded system and a network medium. In the product hierarchy, this controller belongs to interface ICs and ultimately to the broader semiconductor category. The DP83902AVLJ was designed around twisted-pair network connectivity, where a physical-layer transceiver is commonly paired with a controller. The controller handles network framing and data exchange, while the external transceiver performs signal encoding, reception, and electrical isolation from the copper medium.

The DP83902AVLJ uses a 4.75 V minimum and 5.25 V maximum supply voltage, giving system designers a nominal 5 V operating rail. The verified distributor listing reports a supply current of 140 mA. Its 100-pin QFP package provides a substantial number of external connections, which is typical for legacy Ethernet controllers that require parallel host data paths, address and control signals, clocking, interrupt signaling, and twisted-pair transceiver interfaces. Package dimensions, pin names, operating-temperature limits, Ethernet data rate, transceiver interface details, and electrical timing limits are not included in the supplied verification data.

The DP83902AVLJ is most relevant to legacy networking equipment, industrial control systems, embedded controllers, and industrial Ethernet designs that already use this controller and its associated application circuitry. It should not be assumed interchangeable with a modern Ethernet controller merely because both perform networking functions. The verified cross-reference material specifically states that the STMicroelectronics SERC816/TR is not a direct drop-in replacement because its pinout, internal biasing, and MII timing characteristics differ. A PCB replacement therefore requires a detailed electrical, timing, and pin-level review rather than a simple component substitution.

This page consolidates the verified distributor specifications, lifecycle information, sourcing details, and replacement constraints for DP83902AVLJ. Pricing is presented as unavailable because the verified sources provide quote or request-for-quotation terms rather than numeric unit prices. The pin table records all 100 package terminals but marks individual terminal names as unavailable rather than guessing pin functions. Engineers should obtain the manufacturer datasheet and original design reference before layout changes, firmware updates, or obsolescence redesigns.

Alternatif penggantian untuk DP83902AVLJ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

DP83902AVLJ Spesifikasi

Controller Type	Serial Network Interface Controller
Antarmuka	Serial
Supply Voltage Range	4.75 V to 5.25 V
Arus Pemuat	140 mA
Paket	100-BFQFP
DigiKey Package Description	100-QFP (14x20)
Terminal Count	100 terminals
Package Shape	Rectangular
Terminal Form	Gull wing
Package Code	QFP
Temperature Grade	Commercial
Packaging	Tray
Product Description	IC CTRLR SER NETWORK IN 100QFP
Network Medium	Twisted pair

Konfigurasi Pin DP83902AVLJ

Pin produk 1	[DATA_NEEDED: pin 1 name] — Pin function is not available in the supplied verified data.
Pin produk 2	[DATA_NEEDED: pin 2 name] — Pin function is not available in the supplied verified data.
Pin produk 3	[DATA_NEEDED: pin 3 name] — Pin function is not available in the supplied verified data.
Pin produk 4	[DATA_NEEDED: pin 4 name] — Pin function is not available in the supplied verified data.
Pin produk 5	[DATA_NEEDED: pin 5 name] — Pin function is not available in the supplied verified data.
Pin produk 6	[DATA_NEEDED: pin 6 name] — Pin function is not available in the supplied verified data.
Pin produk 7	[DATA_NEEDED: pin 7 name] — Pin function is not available in the supplied verified data.
Pin produk 8	[DATA_NEEDED: pin 8 name] — Pin function is not available in the supplied verified data.
Pin produk 9	[DATA_NEEDED: pin 9 name] — Pin function is not available in the supplied verified data.
Pin produk 10	[DATA_NEEDED: pin 10 name] — Pin function is not available in the supplied verified data.
Pin produk 11	[DATA_NEEDED: pin 11 name] — Pin function is not available in the supplied verified data.
Pin produk 12	[DATA_NEEDED: pin 12 name] — Pin function is not available in the supplied verified data.
Pin produk 13	[DATA_NEEDED: pin 13 name] — Pin function is not available in the supplied verified data.
Pin produk 14	[DATA_NEEDED: pin 14 name] — Pin function is not available in the supplied verified data.
Pin produk 15	[DATA_NEEDED: pin 15 name] — Pin function is not available in the supplied verified data.
Pin produk 16	[DATA_NEEDED: pin 16 name] — Pin function is not available in the supplied verified data.
Pin produk 17	[DATA_NEEDED: pin 17 name] — Pin function is not available in the supplied verified data.
Pin produk 18	[DATA_NEEDED: pin 18 name] — Pin function is not available in the supplied verified data.
Pin produk 19	[DATA_NEEDED: pin 19 name] — Pin function is not available in the supplied verified data.
Pin produk 20	[DATA_NEEDED: pin 20 name] — Pin function is not available in the supplied verified data.
Pin produk 21	[DATA_NEEDED: pin 21 name] — Pin function is not available in the supplied verified data.
Pin produk 22	[DATA_NEEDED: pin 22 name] — Pin function is not available in the supplied verified data.
Pin produk 23	[DATA_NEEDED: pin 23 name] — Pin function is not available in the supplied verified data.
Pin produk 24	[DATA_NEEDED: pin 24 name] — Pin function is not available in the supplied verified data.
Pin produk 25	[DATA_NEEDED: pin 25 name] — Pin function is not available in the supplied verified data.
Pin produk 26	[DATA_NEEDED: pin 26 name] — Pin function is not available in the supplied verified data.
Pin produk 27	[DATA_NEEDED: pin 27 name] — Pin function is not available in the supplied verified data.
Pin produk 28	[DATA_NEEDED: pin 28 name] — Pin function is not available in the supplied verified data.
Pin produk 29	[DATA_NEEDED: pin 29 name] — Pin function is not available in the supplied verified data.
Pin produk 30	[DATA_NEEDED: pin 30 name] — Pin function is not available in the supplied verified data.
Pin produk 31	[DATA_NEEDED: pin 31 name] — Pin function is not available in the supplied verified data.
Pin produk 32	[DATA_NEEDED: pin 32 name] — Pin function is not available in the supplied verified data.
Pin produk 33	[DATA_NEEDED: pin 33 name] — Pin function is not available in the supplied verified data.
Pin produk 34	[DATA_NEEDED: pin 34 name] — Pin function is not available in the supplied verified data.
Pin produk 35	[DATA_NEEDED: pin 35 name] — Pin function is not available in the supplied verified data.
Pin produk 36	[DATA_NEEDED: pin 36 name] — Pin function is not available in the supplied verified data.
Pin produk 37	[DATA_NEEDED: pin 37 name] — Pin function is not available in the supplied verified data.
Pin produk 38	[DATA_NEEDED: pin 38 name] — Pin function is not available in the supplied verified data.
Pin produk 39	[DATA_NEEDED: pin 39 name] — Pin function is not available in the supplied verified data.
Pin produk 40	[DATA_NEEDED: pin 40 name] — Pin function is not available in the supplied verified data.
Pin produk 41	[DATA_NEEDED: pin 41 name] — Pin function is not available in the supplied verified data.
Pin produk 42	[DATA_NEEDED: pin 42 name] — Pin function is not available in the supplied verified data.
Pin produk 43	[DATA_NEEDED: pin 43 name] — Pin function is not available in the supplied verified data.
Pin produk 44	[DATA_NEEDED: pin 44 name] — Pin function is not available in the supplied verified data.
Pin produk 45	[DATA_NEEDED: pin 45 name] — Pin function is not available in the supplied verified data.
Pin produk 46	[DATA_NEEDED: pin 46 name] — Pin function is not available in the supplied verified data.
Pin produk 47	[DATA_NEEDED: pin 47 name] — Pin function is not available in the supplied verified data.
Pin produk 48	[DATA_NEEDED: pin 48 name] — Pin function is not available in the supplied verified data.
Pin produk 49	[DATA_NEEDED: pin 49 name] — Pin function is not available in the supplied verified data.
Pin produk 50	[DATA_NEEDED: pin 50 name] — Pin function is not available in the supplied verified data.
Pin produk 51	[DATA_NEEDED: pin 51 name] — Pin function is not available in the supplied verified data.
Pin produk 52	[DATA_NEEDED: pin 52 name] — Pin function is not available in the supplied verified data.
Pin produk 53	[DATA_NEEDED: pin 53 name] — Pin function is not available in the supplied verified data.
Pin produk 54	[DATA_NEEDED: pin 54 name] — Pin function is not available in the supplied verified data.
Pin produk 55	[DATA_NEEDED: pin 55 name] — Pin function is not available in the supplied verified data.
Pin produk 56	[DATA_NEEDED: pin 56 name] — Pin function is not available in the supplied verified data.
Pin produk 57	[DATA_NEEDED: pin 57 name] — Pin function is not available in the supplied verified data.
Pin produk 58	[DATA_NEEDED: pin 58 name] — Pin function is not available in the supplied verified data.
Pin produk 59	[DATA_NEEDED: pin 59 name] — Pin function is not available in the supplied verified data.
Pin produk 60	[DATA_NEEDED: pin 60 name] — Pin function is not available in the supplied verified data.
Pin produk 61	[DATA_NEEDED: pin 61 name] — Pin function is not available in the supplied verified data.
Pin produk 62	[DATA_NEEDED: pin 62 name] — Pin function is not available in the supplied verified data.
Pin produk 63	[DATA_NEEDED: pin 63 name] — Pin function is not available in the supplied verified data.
Pin produk 64	[DATA_NEEDED: pin 64 name] — Pin function is not available in the supplied verified data.
Pin produk 65	[DATA_NEEDED: pin 65 name] — Pin function is not available in the supplied verified data.
Pin produk 66	[DATA_NEEDED: pin 66 name] — Pin function is not available in the supplied verified data.
Pin produk 67	[DATA_NEEDED: pin 67 name] — Pin function is not available in the supplied verified data.
Pin produk 68	[DATA_NEEDED: pin 68 name] — Pin function is not available in the supplied verified data.
Pin produk 69	[DATA_NEEDED: pin 69 name] — Pin function is not available in the supplied verified data.
Pin produk 70	[DATA_NEEDED: pin 70 name] — Pin function is not available in the supplied verified data.
Pin produk 71	[DATA_NEEDED: pin 71 name] — Pin function is not available in the supplied verified data.
Pin produk 72	[DATA_NEEDED: pin 72 name] — Pin function is not available in the supplied verified data.
Pin produk 73	[DATA_NEEDED: pin 73 name] — Pin function is not available in the supplied verified data.
Pin produk 74	[DATA_NEEDED: pin 74 name] — Pin function is not available in the supplied verified data.
Pin produk 75	[DATA_NEEDED: pin 75 name] — Pin function is not available in the supplied verified data.
Pin produk 76	[DATA_NEEDED: pin 76 name] — Pin function is not available in the supplied verified data.
Pin produk 77	[DATA_NEEDED: pin 77 name] — Pin function is not available in the supplied verified data.
Pin produk 78	[DATA_NEEDED: pin 78 name] — Pin function is not available in the supplied verified data.
Pin produk 79	[DATA_NEEDED: pin 79 name] — Pin function is not available in the supplied verified data.
Pin produk 80	[DATA_NEEDED: pin 80 name] — Pin function is not available in the supplied verified data.
Pin produk 81	[DATA_NEEDED: pin 81 name] — Pin function is not available in the supplied verified data.
Pin produk 82	[DATA_NEEDED: pin 82 name] — Pin function is not available in the supplied verified data.
Pin produk 83	[DATA_NEEDED: pin 83 name] — Pin function is not available in the supplied verified data.
Pin produk 84	[DATA_NEEDED: pin 84 name] — Pin function is not available in the supplied verified data.
Pin produk 85	[DATA_NEEDED: pin 85 name] — Pin function is not available in the supplied verified data.
Pin produk 86	[DATA_NEEDED: pin 86 name] — Pin function is not available in the supplied verified data.
Pin produk 87	[DATA_NEEDED: pin 87 name] — Pin function is not available in the supplied verified data.
Pin produk 88	[DATA_NEEDED: pin 88 name] — Pin function is not available in the supplied verified data.
Pin produk 89	[DATA_NEEDED: pin 89 name] — Pin function is not available in the supplied verified data.
Pin produk 90	[DATA_NEEDED: pin 90 name] — Pin function is not available in the supplied verified data.
Pin produk 91	[DATA_NEEDED: pin 91 name] — Pin function is not available in the supplied verified data.
Pin produk 92	[DATA_NEEDED: pin 92 name] — Pin function is not available in the supplied verified data.
Pin produk 93	[DATA_NEEDED: pin 93 name] — Pin function is not available in the supplied verified data.
Pin produk 94	[DATA_NEEDED: pin 94 name] — Pin function is not available in the supplied verified data.
Pin produk 95	[DATA_NEEDED: pin 95 name] — Pin function is not available in the supplied verified data.
Pin produk 96	[DATA_NEEDED: pin 96 name] — Pin function is not available in the supplied verified data.
Pin produk 97	[DATA_NEEDED: pin 97 name] — Pin function is not available in the supplied verified data.
Pin produk 98	[DATA_NEEDED: pin 98 name] — Pin function is not available in the supplied verified data.
Pin produk 99	[DATA_NEEDED: pin 99 name] — Pin function is not available in the supplied verified data.
Pin produk 100	[DATA_NEEDED: pin 100 name] — Pin function is not available in the supplied verified data.

Aplikasi Umum

DP83902AVLJ cocok untuk 6 aplikasis: Legacy Industrial Ethernet Control, Embedded Twisted-Pair Networking, Legacy Network Interface Card Repair, Server and Switch Spare Parts, Network Test Equipment, Obsolescence Continuity Engineering.

🏭

Legacy Industrial Ethernet Control

The DP83902AVLJ is appropriate for maintaining a legacy industrial Ethernet controller board whose original design already uses its 100-terminal QFP device, 5 V supply, and associated driver software. Its verified 4.75 V to 5.25 V operating range suits a regulated 5 V rail, while the reported 140 mA supply current identifies the load that the system power design must accommodate. Because the part is obsolete, the strongest use case is repair or continuation of proven equipment rather than new platform development. Engineers should preserve the original schematic, board revisions, transceiver selection, and firmware configuration when sourcing a replacement or redesigning around a supported controller.

Direkomendasikan

🧩

Embedded Twisted-Pair Networking

The DP83902AVLJ can support an existing embedded system that uses a dedicated serial network interface controller for twisted-pair communication. Its serial interface and commercial temperature grade match the role of a general-purpose networking controller, while the 4.75 V to 5.25 V supply range requires a stable nominal 5 V source in the host design. The verified 140 mA supply-current figure is important when budgeting the controller rail. Designers should not reuse a modern Ethernet PHY by assumption; the controller-to-transceiver signal definitions, timing, isolation, magnetics, and software interface must be confirmed against the original system documentation.

Direkomendasikan

SI8244CB-B-IS1R (Digital-isolator option for a redesigned interface) ENC28J60/SS · Microchip Technology

🖥️

Legacy Network Interface Card Repair

The DP83902AVLJ is relevant to repair and continuation sourcing for legacy network interface cards built around the DP83902A family. The verified catalog data identifies the package as a 100-BFQFP supplied in a tray, allowing engineers to check board compatibility before procurement. Its obsolete lifecycle status means that inventory may be limited, and quotation sellers should be asked about factory-sealed status, traceability, date code, and storage history. Before installation, verify that the replacement has the correct suffix, package terminal arrangement, supply requirements, and transceiver compatibility rather than relying only on the base device description.

Direkomendasikan

ENC424J600-I/PT · Microchip Technology ENC28J60/SS · Microchip Technology

🌐

Server and Switch Spare Parts

A DP83902AVLJ may be used in selected spare-part workflows for older server, switch, or network-adapter hardware that originally incorporated the controller. The 100-QFP package and obsolete status mean that procurement teams need exact board-level confirmation before treating the device as a universal spare. The verified 5 V supply range and 140 mA current provide initial electrical screening, but they do not establish temperature grade limits or data-rate suitability. Maintain the original manufacturer part number in approved vendor lists, require traceability where required, and test every replacement board at the interfaces affected by the network controller.

Direkomendasikan

P82B96DRG4 · Texas Instruments ENC28J60/SS · Microchip Technology

🔧

Network Test Equipment

The DP83902AVLJ may appear in legacy network test equipment or protocol analyzers that were designed around a dedicated twisted-pair serial controller. Such equipment often depends on exact timing and software behavior, making the original part preferable when repairing an unchanged platform. Its reported 140 mA supply current and 5 V operating range help identify the correct power section during fault analysis. For new test equipment, however, engineers should evaluate currently supported controllers with documented driver APIs and current sourcing. Any migration requires comparison of media access behavior, frame handling, bus timing, interrupt latency, and host-platform compatibility.

Direkomendasikan

ENC28J60/SS · Microchip Technology ENC424J600-I/PT · Microchip Technology

🏭

Obsolescence Continuity Engineering

The DP83902AVLJ is directly relevant to obsolescence management because it is verified as obsolete while still appearing at distributors with reported inventory and quotation-based fulfillment. Continuity engineers can use the 100-BFQFP package, 4.75 V to 5.25 V supply range, and 140 mA supply current to identify affected assemblies. The absence of verified drop-in alternatives means a resilience plan may require a last-time-buy decision, retained stock, board respin, or software-supported controller migration. The SERC816/TR may inform functional redesign, but its verified pinout, biasing, and MII timing differences prevent treating it as a no-change substitution.

Direkomendasikan

ENC28J60/SS · Microchip Technology ENC424J600-I/PT · Microchip Technology

Ringkasan Produk Direkomendasikan

ENC28J60/SS Microchip Technology Digunakan di dalam: Legacy Industrial Ethernet Control, Embedded Twisted-Pair Networking, Legacy Network Interface Card Repair, Server and Switch Spare Parts, Network Test Equipment, Obsolescence Continuity Engineering ENC424J600-I/PT Microchip Technology Digunakan di dalam: Legacy Industrial Ethernet Control, Legacy Network Interface Card Repair, Network Test Equipment, Obsolescence Continuity Engineering SI8244CB-B-IS1R Digital-isolator option for a redesigned interface Digunakan di dalam: Embedded Twisted-Pair Networking P82B96DRG4 Texas Instruments Digunakan di dalam: Server and Switch Spare Parts

What is the DP83902AVLJ?

The DP83902AVLJ is a Texas Instruments serial network interface controller for twisted-pair networks, supplied in a 100-QFP package. The verified DigiKey and DigChips listings identify its interface as serial, its supply range as 4.75 V to 5.25 V, and its supply current as 140 mA. It belongs to the interface-controller category and was designed for legacy computer-networking and embedded systems requiring a dedicated network interface controller.

What is the operating voltage of the DP83902AVLJ?

The DP83902AVLJ operates from 4.75 V to 5.25 V, making it a nominal 5 V interface controller. The same verified specification also reports a supply current of 140 mA. Because the permitted operating range is narrow, the power rail should be regulated to 5 V within those limits. A specific tolerance, ripple requirement, and maximum operating dissipation are not present in the supplied data and must be checked in the manufacturer datasheet.

What package does the DP83902AVLJ use?

The DP83902AVLJ is offered in a 100-BFQFP package, described by DigiKey as a 100-QFP measuring 14 mm by 20 mm. Other verified catalog data identifies the package as rectangular QFP with gull-wing terminals. The component is supplied in a tray. Individual pin assignments are not included in the supplied results, so the 100-terminal record below intentionally uses data-needed markers instead of inventing terminal functions.

Is the DP83902AVLJ still active?

No. The verified Octopart comparison identifies DP83902AVLJ as obsolete. That status means new designs should not assume normal long-term production availability, while existing industrial and networking equipment may still require repair or continuation sourcing. Lifecycle status should be reconfirmed before a production commitment because obsolete components can remain available through surplus channels without receiving ordinary manufacturing notices.

Where can I download the DP83902AVLJ datasheet PDF?

The DP83902AVLJ datasheet PDF is available through the verified AllDataSheet archive at https://www.alldatasheet.com/datasheet-pdf/pdf/8364/NSC/DP83902AVLJ.html. The result identifies the document as the National Semiconductor DP83902A family datasheet and reports 70 pages. Because the legacy document is hosted by an archive rather than the current manufacturer domain, engineers should also consult Texas Instruments cross-reference resources and confirm document revision status before using it for a new design.

Where can I find the DP83902AVLJ pinout?

The DP83902AVLJ pinout must be obtained from the 100-pin DP83902A family datasheet linked by the verified AllDataSheet source. The package contains 100 gull-wing terminals, and no complete terminal-name table appears in the supplied search results. This page therefore lists terminals 1 through 100 but marks each function as data needed. Do not infer bus, power, clock, reset, or transceiver signals from neighboring parts because legacy Ethernet controllers may use nonstandard pin assignments.

What can replace the DP83902AVLJ?

No verified true drop-in replacement was identified for the DP83902AVLJ in the supplied cross-reference data. The STMicroelectronics SERC816/TR is functionally related, but the verified comparison explicitly says it is not a direct drop-in replacement because its pinout, internal biasing, and MII timing characteristics differ. Engineers should treat SERC816/TR as a redesign candidate only after checking supply requirements, timing, transceiver interfaces, software support, and PCB changes.

Is the SERC816/TR a drop-in replacement for the DP83902AVLJ?

No. The SERC816/TR is not a direct drop-in replacement for the DP83902AVLJ, according to the verified Digi-Electronics comparison. It differs in pinout, internal biasing, and MII timing characteristics, and it does not share the verified 100-BFQFP package arrangement. Both devices support 10 Mbps Ethernet operation, but functional equivalence does not establish PCB compatibility. A replacement project therefore requires schematic, layout, timing, and firmware validation.

What is the best STMicroelectronics equivalent for the DP83902AVLJ?

The STMicroelectronics SERC816/TR is the relevant web-identified equivalent candidate, but it is not a verified drop-in replacement for the DP83902AVLJ. The supplied source explicitly identifies differences in pinout, internal biasing, MII timing, and supply tolerance. Consequently, no STMicroelectronics part can be presented as a board-compatible alternative without a separate engineering review. The candidate may support a redesigned 10 Mbps twisted-pair Ethernet interface after compatibility testing.

DP83902AVLJ vs SERC816/TR — which is better for an existing PCB?

The DP83902AVLJ is the correct choice for preserving an existing PCB because the verified SERC816/TR data identifies it as not pin-compatible and therefore not a direct replacement. The SERC816/TR may be considered for a redesigned controller board after confirming electrical requirements and MII timing. Replacing the installed DP83902AVLJ with the SERC816/TR without changing the layout risks interconnection, biasing, timing, and firmware failures.

When should I choose the DP83902AVLJ over a modern Ethernet controller?

Choose the DP83902AVLJ only when maintaining an existing legacy design that already depends on its controller, driver, board layout, and 5 V network interface. It is generally unsuitable for new designs because the part is obsolete and the verified alternatives do not provide a pin-compatible upgrade. For new products, select a currently supported controller with appropriate Ethernet speed, software ecosystem, supply availability, package, and long-term sourcing rather than reproducing an obsolete architecture.

Is the DP83902AVLJ suitable for industrial networking equipment?

The DP83902AVLJ can be suitable for maintaining legacy industrial networking equipment because it is a commercial-grade twisted-pair serial network interface controller with a 4.75 V to 5.25 V supply range. The commercial temperature limits, Ethernet rate, protocol details, and long-term lifecycle availability are not supplied, so suitability cannot be confirmed for a specific industrial temperature range or network standard. Existing proven circuitry and its operating environment must be reviewed.

Where can I buy the DP83902AVLJ online?

The DP83902AVLJ is listed by DigiKey at https://www.digikey.com/en/products/detail/texas-instruments/DP83902AVLJ/212052 and by Heisener at https://www.heisener.com/ProductDetail/DP83902AVLJ. The Heisener result reported 8,484 pieces and an estimated delivery window as of the supplied 2026-10-28 retrieval. Because the part is obsolete and distributor inventory can change rapidly, current quantity, condition, traceability, and price should be confirmed before ordering.

What is the price of the DP83902AVLJ?

A numeric DP83902AVLJ unit price is not available in the verified results as of 2026-10-28. DigiKey exposes purchasing, pricing, and availability functions for the part, while the other verified sellers primarily request a quotation. The price tiers on this page therefore contain null values rather than invented numbers. Buyers should request a formal quotation covering quantity breaks, component condition, packaging, traceability, and delivery date.

What is the lead time and stock status of the DP83902AVLJ?

The verified Heisener listing reported 8,484 pieces in stock and an estimated delivery of January 15 through January 20 as of the supplied 2026-10-28 retrieval. However, the listing uses request-for-quotation terms and the part is obsolete, so the historical stock figure should not be treated as guaranteed current inventory. Confirm availability directly with the seller, including lot date, traceability, and whether the offered pieces are new, factory-sealed, or surplus stock.

What are the key specifications of the DP83902AVLJ that engineers should know?

The key verified specifications are a 4.75 V to 5.25 V supply range, approximately 140 mA supply current, a serial interface, a 100-BFQFP package, commercial temperature grade, and tray packaging. The device is an obsolete Texas Instruments serial network interface controller intended for twisted-pair networking. Ethernet data rate, complete pin functions, operating-temperature limits, electrical timing, and compliance declarations are not present in the supplied evidence and require confirmation from the manufacturer datasheet.

Data referensi engineering untuk DP83902AVLJ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the DP83902AVLJ when repairing or continuing an unchanged legacy design that already depends on its 100-BFQFP footprint, 5 V supply arrangement, and original controller software. Confirm the exact board revision, package orientation, transceiver architecture, operating temperature, and source condition before ordering because the component is obsolete and the verified inventory record may change. Do not choose the SERC816/TR as a drop-in replacement: the available evidence explicitly identifies pinout, internal-biasing, and MII timing differences. Treat it only as a functional redesign candidate after schematic and firmware work. For a new product, select a currently supported Ethernet controller instead of reproducing this obsolete architecture. This recommendation balances the value of preserving proven legacy equipment against the sourcing, thermal, qualification, and long-term availability risks associated with an obsolete 100-pin network controller.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini
Package	100-BFQFP
Brand	Texas Instruments
Controller Type	Serial Network Interface Controller
Interface	Serial
Supply Voltage Range	4.75 V to 5.25 V
Supply Current	140 mA
Terminal Count	100 terminals
Temperature Grade	Commercial
Packaging	Tray
Lifecycle Status	Obsolete

Diferensiator Kunci

Exact-fit continuation for the legacy DP83902A controller platform (vsSERC816/TR)
Documented 5 V operating range (vsSERC816/TR)
Established tray-packaged 100-terminal legacy form factor (vsSERC816/TR)

Catatan Desain

Do not treat a functionally similar Ethernet controller as a drop-in substitute. The verified SERC816/TR comparison identifies differences in pinout, internal biasing, and MII timing characteristics. A replacement must be checked against the complete DP83902A pin list, power requirements, transceiver signals, clocking, reset behavior, interrupt handling, and host-side software before any board or firmware change is approved.

Design or service the controller rail for a nominal 5 V supply within the verified 4.75 V to 5.25 V range. The reported 140 mA supply current is the verified baseline, but it should not be treated as the maximum transient demand without the manufacturer timing and load data. Decoupling values, allowable ripple, startup sequencing, and power-consumption limits require confirmation from the original DP83902A datasheet and schematic.

For continued production of an unchanged board, source the exact 100-BFQFP package and verify pin-one orientation against the board footprint. The verified catalog data identifies a 14 mm by 20 mm 100-QFP with gull-wing terminals, but the supplied excerpt does not include a land pattern or complete dimensions. Inspect the original component, assembly documentation, and manufacturer drawing before approving solder paste, stencil, or placement changes.

The controller is specified as commercial grade, and its verified catalog listing supplies a 140 mA operating current. These facts do not establish permissible ambient temperature, junction temperature, or package dissipation. For long-term continuation sourcing, document the original thermal conditions and request the manufacturer datasheet or qualified engineering data. Avoid adding heat-sink assumptions based solely on the 100-QFP package because the actual dissipation and board thermal path are not provided.

Legacy twisted-pair Ethernet interfaces often combine a controller, transceiver, isolation barrier, magnetics, and a host bus. During repair, preserve original component placement, high-speed trace topology, grounding, and isolation clearances unless a complete reference design supports changes. The verified material does not identify signal names or timing values, so the original layout must remain the authority when maintaining an existing DP83902AVLJ design.

Informasi Konformitas

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

Bebas Logam Lengket

Unknown

Bebas Halogena

Unknown

Mineral Konflik

Unknown

The supplied verified data identifies the product as commercial grade but does not extract RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is marked not_applicable because the device is a commercial-grade network interface controller rather than an identified automotive-qualified part.

Data disahkan pada: 2026-10-28 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Distributor, Manufacturer Datasheet, Distributor, Distributor, Distributor, Distributor, Distributor, Manufacturer Datasheet, Distributor, Octopart, Octopart, Octopart, Distributor, Octopart, Distributor, Octopart, Distributor, Octopart, Distributor, Distributor, Octopart, Manufacturer Product Page, Manufacturer Datasheet, Octopart, Distributor, Octopart, Distributor, Octopart

Pencarian Terkait

DP83902AVLJ DP83902AVLJ datasheet PDF Texas Instruments DP83902AVLJ DP83902AVLJ 100-QFP 5V controller DP83902AVLJ pinout DP83902AVLJ obsolete replacement DP83902AVLJ vs SERC816/TR DP83902AVLJ buy price DP83902AVLJ stock and lead time legacy twisted-pair serial network controller where to buy DP83902AVLJ online what can replace DP83902AVLJ

Komponen dan Istilah Terkait

Texas Instruments National Semiconductor DP83902AVLJ DP83902A ST-NIC serial network interface controller interface controller interface IC semiconductor serial interface twisted-pair Ethernet Ethernet controller MII 100-BFQFP 100-QFP QFP package gull-wing terminal surface-mount package commercial temperature grade 4.75 V to 5.25 V supply 140 mA supply current obsolete component SERC816/TR STMicroelectronics RoHS REACH