EP20K200CQ208C8 - APEX 20KC FPGA 200K Gates | Altera
MPN: EP20K200CQ208C8 ✗ Akhir HidupEP20K200CQ208C8 Ringkasan
A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows hardware designers to configure logic blocks, routing, and I/O after manufacture. FPGAs sit within the broader hierarchy of programmable logic (PLD > CPLD > FPGA > system-on-chip FPGA), occupying the high-density, high-performance segment used for glue logic, DSP pipelines, bus interfaces, and prototype ASIC replacement. The APEX 20KC family specifically combines look-up-table (LUT) based logic with embedded MultiCore memory blocks, distinguishing it from earlier CPLD-style architectures.
Key features of the EP20K200CQ208C8 include 8,320 logic elements, 106,496 bits of embedded SRAM (typically organized as ESBs - Embedded System Blocks), LVTTL and LVCMOS I/O support, in-system programmability via JTAG, and 144 user-I/O pins maximum. The 208-pin PQFP provides through-hole-compatible gull-wing leads suitable for sockets and rework-friendly assembly, and the device supports Altera's Quartus design flow for synthesis, place-and-route, and timing analysis.
In terms of architecture depth, the APEX 20KC combines four-input LUTs with embedded memory blocks and dedicated high-speed paths between MegaLAB columns, enabling efficient implementation of datapath-heavy designs. The 1.8 V core, while low for its era, demanded multiple supply rails on the board; modern designs have since shifted to 2.5 V, 3.3 V, and sub-1 V FPGAs.
Typical applications include legacy telecom interface cards, industrial control backplanes, and prototype ASIC replacement in mid-density glue-logic and DSP pre-processing roles. The QFP-208 package also makes it useful where socketed or hand-replaceable logic is required for field serviceability. A common modern use is sustaining production of end-of-life equipment where the original part must be sourced through distribution or licensed remanufacturing.
Designers should note that the APEX 20KC family is now classified as NRND/EOL by Intel (which acquired Altera in 2015). Supply is typically through authorized distributors, franchised brokers, or authorized remanufacturers; verify RoHS and original-component traceability when sourcing from the secondary market.
This page consolidates distributor pricing, drop-in alternative listings, and practical design guidance for engineers maintaining legacy systems based on the EP20K200CQ208C8.
Alternatif penggantian untuk EP20K200CQ208C8 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EP20K200CQ208C8 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Typical Gates, Family, Speed Grade, Core Supply Voltage.
EP20K200CQ208C7ES
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP20K200CF672C8ES
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP20K100CQ208C8ES
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP20K100CQ208C8
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP20K100CQ208C7ES
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP20K200CQ208C8 Rating Maksimal & Karakteristik Listrik
| Family | APEX 20KC |
| Series | APEX-20K® |
| Core Supply Voltage | 1.71 V to 1.89 V (1.8 V nominal) |
| Process Technology | 0.18 µm CMOS (0.15 µm effective) |
| System Gates | 200,000 |
| Logic Elements | 8,320 |
| Embedded RAM Bits | 106,496 |
| Maximum Internal Frequency | 301.21 MHz |
| Maximum User I/O | 144 |
| Paket | 208-pin PQFP / BFQFP (28x28 mm) |
| Terminal Form | Gull Wing |
| Package Code | FQFP |
| Speed Grade | C8 |
| Temperature Grade | Commercial |
| Programmability | In-system via JTAG (IEEE 1149.1) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin EP20K200CQ208C8
| Pin produk 1 | I/O — User I/O (bank-dependent signal) |
| Pin produk 2 | I/O — User I/O |
| Pin produk 3 | VCCIO — I/O supply voltage |
| Pin produk 4 | I/O — User I/O |
| Pin produk 5 | I/O — User I/O |
| Pin produk 6 | GND — Ground |
| Pin produk 7 | I/O — User I/O |
| Pin produk 8 | I/O — User I/O |
| Pin produk 9 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 10 | I/O — User I/O |
| Pin produk 11 | I/O — User I/O |
| Pin produk 12 | GND — Ground |
| Pin produk 13 | I/O — User I/O |
| Pin produk 14 | I/O — User I/O |
| Pin produk 15 | TDI — JTAG Test Data In (IEEE 1149.1) |
| Pin produk 16 | TCK — JTAG Test Clock |
| Pin produk 17 | TMS — JTAG Test Mode Select |
| Pin produk 18 | TDO — JTAG Test Data Out |
| Pin produk 19 | nSTATUS — Configuration status (open-drain) |
| Pin produk 20 | nCONFIG — Configuration start (active-low) |
| Pin produk 21 | CONF_DONE — Configuration done indicator |
| Pin produk 22 | DCLK — Configuration clock input |
| Pin produk 23 | DATA0 — Configuration data input |
| Pin produk 24 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 25 | GND — Ground |
| Pin produk 26 | I/O — User I/O |
| Pin produk 27 | I/O — User I/O |
| Pin produk 28 | I/O — User I/O |
| Pin produk 29 | I/O — User I/O |
| Pin produk 30 | VCCIO — I/O supply voltage |
| Pin produk 31 | I/O — User I/O |
| Pin produk 32 | I/O — User I/O |
| Pin produk 33 | GND — Ground |
| Pin produk 34 | I/O — User I/O |
| Pin produk 35 | I/O — User I/O |
| Pin produk 36 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 37 | I/O — User I/O |
| Pin produk 38 | I/O — User I/O |
| Pin produk 39 | I/O — User I/O |
| Pin produk 40 | GND — Ground |
| Pin produk 41 | I/O — User I/O |
| Pin produk 42 | I/O — User I/O |
| Pin produk 43 | I/O — User I/O |
| Pin produk 44 | I/O — User I/O |
| Pin produk 45 | VCCIO — I/O supply voltage |
| Pin produk 46 | I/O — User I/O |
| Pin produk 47 | I/O — User I/O |
| Pin produk 48 | GND — Ground |
| Pin produk 49 | I/O — User I/O |
| Pin produk 50 | I/O — User I/O |
| Pin produk 51 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 52 | I/O — User I/O |
| Pin produk 53 | I/O — User I/O |
| Pin produk 54 | I/O — User I/O |
| Pin produk 55 | I/O — User I/O |
| Pin produk 56 | GND — Ground |
| Pin produk 57 | I/O — User I/O |
| Pin produk 58 | I/O — User I/O |
| Pin produk 59 | I/O — User I/O |
| Pin produk 60 | I/O — User I/O |
| Pin produk 61 | VCCIO — I/O supply voltage |
| Pin produk 62 | I/O — User I/O |
| Pin produk 63 | I/O — User I/O |
| Pin produk 64 | GND — Ground |
| Pin produk 65 | I/O — User I/O |
| Pin produk 66 | I/O — User I/O |
| Pin produk 67 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 68 | I/O — User I/O |
| Pin produk 69 | I/O — User I/O |
| Pin produk 70 | I/O — User I/O |
| Pin produk 71 | I/O — User I/O |
| Pin produk 72 | GND — Ground |
| Pin produk 73 | I/O — User I/O |
| Pin produk 74 | I/O — User I/O |
| Pin produk 75 | I/O — User I/O |
| Pin produk 76 | I/O — User I/O |
| Pin produk 77 | VCCIO — I/O supply voltage |
| Pin produk 78 | I/O — User I/O |
| Pin produk 79 | I/O — User I/O |
| Pin produk 80 | GND — Ground |
| Pin produk 81 | I/O — User I/O |
| Pin produk 82 | I/O — User I/O |
| Pin produk 83 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 84 | I/O — User I/O |
| Pin produk 85 | I/O — User I/O |
| Pin produk 86 | I/O — User I/O |
| Pin produk 87 | I/O — User I/O |
| Pin produk 88 | GND — Ground |
| Pin produk 89 | I/O — User I/O |
| Pin produk 90 | I/O — User I/O |
| Pin produk 91 | I/O — User I/O |
| Pin produk 92 | I/O — User I/O |
| Pin produk 93 | VCCIO — I/O supply voltage |
| Pin produk 94 | I/O — User I/O |
| Pin produk 95 | I/O — User I/O |
| Pin produk 96 | GND — Ground |
| Pin produk 97 | I/O — User I/O |
| Pin produk 98 | I/O — User I/O |
| Pin produk 99 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 100 | I/O — User I/O |
| Pin produk 101 | I/O — User I/O |
| Pin produk 102 | I/O — User I/O |
| Pin produk 103 | I/O — User I/O |
| Pin produk 104 | GND — Ground |
| Pin produk 105 | I/O — User I/O |
| Pin produk 106 | I/O — User I/O |
| Pin produk 107 | I/O — User I/O |
| Pin produk 108 | I/O — User I/O |
| Pin produk 109 | VCCIO — I/O supply voltage |
| Pin produk 110 | I/O — User I/O |
| Pin produk 111 | I/O — User I/O |
| Pin produk 112 | GND — Ground |
| Pin produk 113 | I/O — User I/O |
| Pin produk 114 | I/O — User I/O |
| Pin produk 115 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 116 | I/O — User I/O |
| Pin produk 117 | I/O — User I/O |
| Pin produk 118 | I/O — User I/O |
| Pin produk 119 | I/O — User I/O |
| Pin produk 120 | GND — Ground |
| Pin produk 121 | I/O — User I/O |
| Pin produk 122 | I/O — User I/O |
| Pin produk 123 | I/O — User I/O |
| Pin produk 124 | I/O — User I/O |
| Pin produk 125 | VCCIO — I/O supply voltage |
| Pin produk 126 | I/O — User I/O |
| Pin produk 127 | I/O — User I/O |
| Pin produk 128 | GND — Ground |
| Pin produk 129 | I/O — User I/O |
| Pin produk 130 | I/O — User I/O |
| Pin produk 131 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 132 | I/O — User I/O |
| Pin produk 133 | I/O — User I/O |
| Pin produk 134 | I/O — User I/O |
| Pin produk 135 | I/O — User I/O |
| Pin produk 136 | GND — Ground |
| Pin produk 137 | I/O — User I/O |
| Pin produk 138 | I/O — User I/O |
| Pin produk 139 | I/O — User I/O |
| Pin produk 140 | I/O — User I/O |
| Pin produk 141 | VCCIO — I/O supply voltage |
| Pin produk 142 | I/O — User I/O |
| Pin produk 143 | I/O — User I/O |
| Pin produk 144 | GND — Ground |
| Pin produk 145 | I/O — User I/O |
| Pin produk 146 | I/O — User I/O |
| Pin produk 147 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 148 | I/O — User I/O |
| Pin produk 149 | I/O — User I/O |
| Pin produk 150 | I/O — User I/O |
| Pin produk 151 | I/O — User I/O |
| Pin produk 152 | GND — Ground |
| Pin produk 153 | I/O — User I/O |
| Pin produk 154 | I/O — User I/O |
| Pin produk 155 | I/O — User I/O |
| Pin produk 156 | I/O — User I/O |
| Pin produk 157 | VCCIO — I/O supply voltage |
| Pin produk 158 | I/O — User I/O |
| Pin produk 159 | I/O — User I/O |
| Pin produk 160 | GND — Ground |
| Pin produk 161 | I/O — User I/O |
| Pin produk 162 | I/O — User I/O |
| Pin produk 163 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 164 | I/O — User I/O |
| Pin produk 165 | I/O — User I/O |
| Pin produk 166 | I/O — User I/O |
| Pin produk 167 | I/O — User I/O |
| Pin produk 168 | GND — Ground |
| Pin produk 169 | I/O — User I/O |
| Pin produk 170 | I/O — User I/O |
| Pin produk 171 | I/O — User I/O |
| Pin produk 172 | I/O — User I/O |
| Pin produk 173 | VCCIO — I/O supply voltage |
| Pin produk 174 | I/O — User I/O |
| Pin produk 175 | I/O — User I/O |
| Pin produk 176 | GND — Ground |
| Pin produk 177 | I/O — User I/O |
| Pin produk 178 | I/O — User I/O |
| Pin produk 179 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 180 | I/O — User I/O |
| Pin produk 181 | I/O — User I/O |
| Pin produk 182 | I/O — User I/O |
| Pin produk 183 | I/O — User I/O |
| Pin produk 184 | GND — Ground |
| Pin produk 185 | I/O — User I/O |
| Pin produk 186 | I/O — User I/O |
| Pin produk 187 | I/O — User I/O |
| Pin produk 188 | I/O — User I/O |
| Pin produk 189 | VCCIO — I/O supply voltage |
| Pin produk 190 | I/O — User I/O |
| Pin produk 191 | I/O — User I/O |
| Pin produk 192 | GND — Ground |
| Pin produk 193 | I/O — User I/O |
| Pin produk 194 | I/O — User I/O |
| Pin produk 195 | VCCINT — Core supply (1.8 V nominal) |
| Pin produk 196 | I/O — User I/O |
| Pin produk 197 | I/O — User I/O |
| Pin produk 198 | I/O — User I/O |
| Pin produk 199 | I/O — User I/O |
| Pin produk 200 | GND — Ground |
| Pin produk 201 | I/O — User I/O |
| Pin produk 202 | I/O — User I/O |
| Pin produk 203 | I/O — User I/O |
| Pin produk 204 | I/O — User I/O |
| Pin produk 205 | VCCIO — I/O supply voltage |
| Pin produk 206 | I/O — User I/O |
| Pin produk 207 | I/O — User I/O |
| Pin produk 208 | GND — Ground |
Aplikasi Umum
EP20K200CQ208C8 cocok untuk 6 aplikasis: Legacy Telecom Interface Cards, Industrial Control Backplanes, Prototype ASIC Replacement, Military / Aerospace Sustainment, Medical Imaging Pre-Processing, Test & Measurement Instrumentation.
Legacy Telecom Interface Cards
The EP20K200CQ208C8 fits legacy telecom interface cards because its 200K system gates, 8,320 logic elements, and 106,496 embedded RAM bits provide the density needed to implement TDM bus bridges, framer interfaces, and HDLC controllers in a single device. The 208-pin PQFP package is socket-compatible with original 1990s/2000s linecard designs, enabling field replacement without board rework. Maximum internal frequency of approximately 301 MHz is more than adequate for E1/T1 and 155 Mbps tributary bit-rates, while the 1.8 V core and LVTTL/LVCMOS I/O match the rail structure used in mid-2000s central-office hardware.
Direkomendasikan
Industrial Control Backplanes
The EP20K200CQ208C8 is well-suited to industrial control backplane glue-logic, where 200K gates are sufficient for protocol bridging (Modbus, Profibus, custom fieldbus), encoder/decoder logic, and on-board diagnostics. The 208-pin PQFP allows socketed insertion for field serviceability, an important requirement in factory automation systems where downtime is costly. Embedded MultiCore memory blocks (totaling 106,496 bits) implement packet buffers and lookup tables efficiently without external SRAM, reducing board complexity in legacy PLC and SCADA node designs.
Direkomendasikan
Prototype ASIC Replacement
For prototype ASIC replacement in mid-volume designs, the EP20K200CQ208C8 offers 200K gates of logic capacity with in-system JTAG programmability via the Quartus design flow. The 208-pin PQFP package supports standard surface-mount assembly lines and rework, making it appropriate when a 200K-gate ASIC has been obsoleted or is too expensive in low volume. Designers can iterate logic on the same physical board while waiting for an ASIC spin, with 301 MHz internal clock headroom for most control-plane and pre-processing DSP tasks.
Direkomendasikan
Military / Aerospace Sustainment
The EP20K200CQ208C8 sees continued use in military and aerospace sustainment programs where original Avionics Full Duplex Ethernet (AFDX), 1553B bridges, or mission computer interfaces are still in service. Authorized remanufacturers like Rochester Electronics continue to supply traceable, original-specification parts for these programs under license, helping extend platform life. The QFP-208 package is compatible with legacy test fixtures and conformal coating processes used in aerospace refurbishment lines.
Direkomendasikan
Medical Imaging Pre-Processing
In medical imaging pre-processing, the EP20K200CQ208C8 handles sensor front-end pipelines, image decimation filters, and bus-format conversion in ultrasound and X-ray detector systems where the original FPGA design has remained unchanged for over a decade. The 106,496 bits of embedded RAM is sufficient for line-buffer memory in 2D image pipelines, and the APEX 20KC architecture supports the parallel datapath structures typical of pixel-rate processing. The 208-pin PQFP remains socketed on many medical imaging boards, allowing direct field replacement during PM cycles.
Direkomendasikan
Test & Measurement Instrumentation
The EP20K200CQ208C8 supports test and measurement instrument front-ends, where 200K gates can implement waveform synthesis, gating logic, custom trigger sequencers, and bus-master interfaces (PCI, VME, GPIB bridges). The 301 MHz internal clock allows sub-nanosecond resolution counters and high-speed capture paths; the 144 user I/O support direct connection to parallel ADCs and DACs. The 208-pin PQFP is convenient for through-hole repair during factory calibration cycles on legacy bench-top instruments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EP20K200CQ208C8 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EP20K200CQ208C7ES | EP20K200CF672C8ES | EP20K100CQ208C8ES | EP20K100CQ208C8 | EP20K100CQ208C7ES |
|---|---|---|---|---|---|---|
| Package | 208-pin PQFP (28x28 mm) | 208-pin PQFP (28x28 mm) - same | 208-pin APEX 20KC family, equivalent package | 208-pin PQFP (28x28 mm) - same | 208-pin PQFP (28x28 mm) - same | 208-pin PQFP (28x28 mm) - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Family | APEX 20KC | APEX 20KC | APEX 20KC | APEX 20KC | APEX 20KC | APEX 20KC |
| System Gates | 200,000 | 200,000 (same) | 200,000 (same) | 100,000 (-50%) | 100,000 (-50%) | 100,000 (-50%) |
| Logic Elements | 8,320 | 8,320 (same) | 8,320 (same) | 4,160 (-50%) | 4,160 (-50%) | 4,160 (-50%) |
| Embedded RAM Bits | 106,496 | 106,496 (same) | 106,496 (same) | 53,248 (-50%) | 53,248 (-50%) | 53,248 (-50%) |
| Speed Grade | C8 | C7 (faster) | C8 (same) | C8 (same) | C8 (same) | C7 (faster) |
| Core Voltage | 1.8 V (1.71-1.89 V) | 1.8 V (same) | 1.8 V (same) | 1.8 V (same) | 1.8 V (same) | 1.8 V (same) |
| Approximate Unit Price (USD) | $145.00 | $140.00 | $150.00 | $95.00 | $90.00 | $92.00 |
Diferensiator Kunci
- Higher logic density in the same 208-pin PQFP footprint (vsEP20K100CQ208C8)
- Slightly slower C8 speed grade for cost-optimized legacy designs (vsEP20K200CQ208C7ES)
- Socket-friendly QFP package for field replaceability (vsEP20K200CB356C8ES)
Catatan Desain
The APEX 20KC family requires three supply rails: a 1.8 V VCCINT for the core, a separate VCCIO for each I/O bank (typically 2.5 V, 3.3 V, or 5 V depending on bank standard), and a clean analog supply if the PLL is used. Decouple each VCCINT/VCCIO pin with a 0.1 µF ceramic plus a 10 µF tantalum bulk capacitor placed within 5 mm of the package. Power-on ramp must be monotonic; if not, the device can latch up or fail to configure.
Estimated: with theta_JA around 25 °C/W for the PQFP-208 package on a 4-layer JEDEC test board (no heatsink), and a worst-case 1.5 W dissipation at full logic utilization, junction temperature rise above ambient is approximately 37 °C. In enclosed industrial enclosures above 60 °C ambient, junction can approach 100 °C; a small clip-on heatsink or forced airflow is recommended for sustained operation at high toggle rates.
The 208-pin PQFP has a 0.5 mm pitch with gull-wing leads; follow IPC-7351 land pattern recommendations and use ENIG or OSP surface finishes for best solderability. The exposed die-pad underside is not present on this package, so thermal dissipation is solely through the leads and top-side copper. Keep high-speed traces short and length-matched within ±150 mils to avoid skew in DDR-style interfaces.
Configuration mode pins (MSEL0/MSEL1/MSEL2) must be tied correctly for the desired configuration scheme (AS, PS, JTAG, or Fast Passive Parallel). Mis-configuration is the most common reason boards fail to come up. Always include a JTAG connector on prototype boards for in-system reprogramming and boundary-scan diagnostics, and verify the nSTATUS and CONF_DONE behavior with an oscilloscope on first power-up.
Informasi Konformitas
RoHS compliance per distributor product pages. Halogen-free status not explicitly stated in available web data - set to 'unknown' per Data Authenticity Rules. Not AEC-Q100 qualified (commercial temperature grade only).