ICS570BIT - 170MHz Spread Spectrum Clock Buffer | Renesas
MPN: ICS570BIT ✓ AktifICS570BIT Ringkasan
A zero-delay buffer is a clock-integrity device that reproduces a clock at its outputs with very little propagation delay while compensating for loading and skew. The ICS570 belongs to the Renesas ClockBlocks family and combines clock generation, fanout distribution, and zero-delay buffering in one integrated circuit. This integration can reduce the number of separate timing components required in systems that need multiple related clock outputs.
The principal operating characteristics include a maximum clock frequency of 170 MHz, a 1:2 output ratio, and a 3.15 V to 3.45 V operating voltage range. The device is identified as a fanout distribution, spread-spectrum clock generator, and zero-delay buffer. Its 8-SOIC package provides a compact surface-mount solution for clock-generation, communications, industrial-control, and embedded systems.
The spread-spectrum function is useful when reducing the spectral concentration of a clock signal. By varying the clock frequency over a controlled range, the device can reduce narrowband emissions and improve system-level electromagnetic compatibility. The PLL-based architecture is intended to provide clock distribution while maintaining predictable output relationships for downstream digital circuitry.
Typical applications include clock fanout for communications equipment, local clock distribution in industrial systems, clock generation for embedded processors, and EMI-sensitive digital platforms. The ICS570BIT is especially relevant when a design requires two outputs, a maximum operating frequency of 170 MHz, and 3.3 V-class operation. Its integrated functions help simplify clock trees while preserving controlled edge relationships.
When designing around the ICS570BIT, verify the input and output timing requirements, supply-voltage tolerance, and the number of loads connected to each output. Keep clock traces short and use controlled-impedance routing where signal-integrity requirements are demanding. This page combines the manufacturer documentation, distributor listing information, package details, and engineering-oriented selection guidance for the ICS570BIT.
Alternatif penggantian untuk ICS570BIT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifICS570BIT Spesifikasi
| Product Type | Fanout distribution, spread-spectrum clock generator, zero-delay buffer IC |
| Frekuensi Bawah Maximum | 170 MHz |
| Fanout Ratio | 1:2 |
| Tegangan Pemuat Kerja | 3.15 V to 3.45 V |
| Paket | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Tipe Mounting | Surface mount |
| Architecture | Analog/digital PLL-based zero-delay buffer |
| Clock Output Type | Spread-spectrum clock output |
| Suhu Kerja | -40 °C to +85 °C |
| Jumlah Pin | 8 pins |
| Manufacturer | Renesas Electronics |
| Product Series | ClockBlocks |
| Output Count | 2 outputs |
ICS570BIT 8-soic, 0.154 inch width, 3.90 mm width Diamant Konfigurasi Panduan
Konfigurasi pin untuk ICS570BIT (8-soic, 0.154 inch width, 3.90 mm width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk ICS570BIT.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ICS570BIT cocok untuk 6 aplikasis: Communications Clock Distribution, Industrial Control Clocking, Embedded Processor Clocking, EMI-Sensitive Digital Platforms, Server and Storage Clocking, Test and Measurement Equipment.
Communications Clock Distribution
The ICS570BIT is suitable for communications equipment that needs one clock source distributed to two related outputs while operating up to 170 MHz. Its 1:2 fanout ratio can simplify the clock tree and reduce the number of separate buffer packages required. Spread-spectrum operation can reduce narrowband spectral concentration, which is valuable when the clock must coexist with high-speed data links and switching circuitry. The 3.15 V to 3.45 V supply range supports 3.3 V-class systems. Confirm input waveform, output timing, load capacitance, and jitter requirements against the Renesas 570 datasheet before final board release.
Direkomendasikan
Industrial Control Clocking
The ICS570BIT can provide controlled clock fanout in industrial control systems where multiple digital sections must operate from related timing signals. Its maximum frequency of 170 MHz and 1:2 output ratio are useful for distributing a clock to processor, logic, or interface blocks. The integrated spread-spectrum feature can help reduce EMI peaks in compact control equipment. The 8-SOIC package simplifies surface-mount assembly, while the -40 °C to +85 °C operating range supports industrial temperature environments. Validate clock tolerance, power sequencing, grounding, and timing margins for each load during system-level verification.
Direkomendasikan
Embedded Processor Clocking
The ICS570BIT is applicable to embedded processor platforms that need two clock outputs and benefit from spread-spectrum timing. The device can distribute a reference clock to processor-related logic while its PLL-based zero-delay architecture addresses propagation-delay concerns. Operation up to 170 MHz makes it relevant for faster digital subsystems, although the processor must be checked for input-jitter and clock-spreading restrictions. The 3.3 V supply range and compact 8-SOIC outline simplify integration with modern embedded designs. Review maximum clock frequency, duty-cycle limits, output skew, and load capacitance in the manufacturer timing documentation.
Direkomendasikan
EMI-Sensitive Digital Platforms
The ICS570BIT is useful in digital platforms where reducing concentrated clock harmonics is important. Spread-spectrum operation varies the timing frequency to distribute energy across a broader band, helping reduce narrowband emissions from the fundamental and its harmonics. The ICS570BIT combines this function with zero-delay buffering and 1:2 fanout, allowing a compact clock-distribution solution instead of separate generator and buffer devices. Its 8-SOIC package supports conventional surface-mount assembly. System qualification should still include conducted and radiated-emissions testing because PCB layout, return paths, cable interfaces, and neighboring switching regulators also influence total electromagnetic performance.
Direkomendasikan
Server and Storage Clocking
The ICS570BIT can be evaluated for server, storage, or peripheral clock-distribution subsystems that require a compact 1:2 fanout stage and spread-spectrum clocking. The 170 MHz ceiling and low-delay PLL-based operation make the device relevant to digital backplanes and high-speed control logic. Spread-spectrum timing may help manage peak emissions in densely assembled equipment. However, server-class designs often impose strict requirements for jitter, reference quality, clock architecture, and fault monitoring. Validate these parameters carefully, maintain short return paths, and use controlled-impedance routing so the clock reaches the receiving circuits with predictable edge quality.
Direkomendasikan
Test and Measurement Equipment
The ICS570BIT is appropriate for test and measurement equipment that generates or distributes related clocks while controlling spectral concentration. The 1:2 fanout can provide clock branches for capture, conversion, interface, or processing sections. Spread-spectrum operation may help meet internal emissions requirements, and the 8-SOIC package simplifies board assembly. For precision instruments, verify the allowable spread-spectrum range, output jitter, duty-cycle distortion, and deterministic timing behavior before using the device in a measurement signal path. The device should serve as a clock-distribution element rather than a substitute for a dedicated low-jitter reference oscillator.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ICS570BIT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Diferensiator Kunci
- Integrated spread-spectrum and zero-delay functions (vsConventional 1:2 clock buffer)
- High operating frequency for compact clock trees (vsLower-frequency clock buffer)
- Dedicated 3.3 V version (vsICS570A-version 5 V design)
Catatan Desain
Place the ICS570BIT close to the clock source and the intended receiving loads. Keep clock traces short, preserve a continuous ground reference, and avoid routing the distributed clock through areas containing high-current switching paths. Because the device provides a 1:2 fanout, route each output toward its assigned load and maintain matched geometry where output timing or cable length requires it.
Review the datasheet timing specifications before assigning loads to either clock output. Confirm input duty cycle, output skew, jitter, maximum output capacitance, and the permitted spread-spectrum range for the design. If the outputs drive longer PCB routes or cables, use source termination, controlled-impedance routing, or an appropriate clock-buffer stage when reflections or edge degradation appear on the measurement equipment.
Do not treat a generic clock buffer as an automatic substitute for the ICS570BIT. A valid replacement must match the pin functions, supply range, 1:2 fanout requirement, frequency capability, timing characteristics, and 8-SOIC footprint. Also verify whether spread-spectrum operation is acceptable for the downstream processor or interface, since some systems require a fixed-frequency clock within a tightly specified tolerance.
Informasi Konformitas
Compliance attributes require confirmation from the manufacturer product documentation or a current compliance declaration.