LFE2-20E-5Q208I - 21K LUT ECP2 FPGA | Lattice Semiconductor
MPN: LFE2-20E-5Q208I ✓ AktifLFE2-20E-5Q208I Ringkasan
An FPGA is a programmable semiconductor in the broader logic semiconductor and digital processing hierarchy. Its configurable lookup logic, embedded block RAM, and programmable I/O blocks allow one physical device to implement control logic, interface bridging, signal processing, and embedded system functions. The ECP2 family combines this reconfigurable architecture with a 1.2 V core and deterministic embedded memory resources for compact industrial and communications designs.
The LFE2-20E-5Q208I provides 21,000 logic elements organized into 2,625 logic array blocks, 282,624 RAM bits, 131 user I/Os, and one DSP multiplier according to the manufacturer listing. Its 208-pin gull-wing package exposes substantially more interface pins than smaller FPGA packages, making it suitable for parallel buses, memory interfaces, high-speed control signals, and multi-channel data acquisition systems.
Device selection depends on the -5 speed grade, industrial-temperature ordering suffix, 1.2 V core architecture, and available package resources. Because the FPGA receives its function from a configuration bitstream, engineers should also verify the required configuration memory, programming interface, clocking scheme, I/O standards, and system-level timing before releasing a PCB for production.
Typical uses include industrial automation controllers, test-and-measurement instruments, communications interface modules, embedded video and imaging control, sensor aggregation, and general-purpose digital signal processing. The large I/O count is especially useful when a design must connect multiple external memory devices, converters, communication transceivers, and precision interface components without requiring a separate large package.
A key design consideration is that the 208-pin package requires careful escape routing and a stable 1.2 V core rail. Follow the manufacturer pinout and recommended power-supply connections, place decoupling capacitors close to the supply pins, and preserve signal-integrity margin on high-speed outputs. Configuration, clock, and I/O standards should be validated against the exact ECP2 device documentation used for the design.
This page organizes the verified device identity, package information, resource counts, comparison points, and practical selection guidance into one engineering-focused reference. It also distinguishes verified ECP2 alternatives from generic FPGA substitutes so engineers can focus on genuine package and parameter compatibility.
Alternatif penggantian untuk LFE2-20E-5Q208I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LFE2-20E-5Q208I (sama faktor bentuk dan footprint) — berbeda di dalam Core Supply Voltage, Speed Grade, Device Type, Package.
LFE2-20E-6Q208C
✅ Drop-InKontak untuk harga
LFE2-20E-6Q208I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LFE2-20E-5Q208C
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LFE2-20E-4Q208I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LFE2-20E-4Q208C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LFE2-20E-5Q208I Rating Maksimal & Karakteristik Listrik
| Product Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 21,000 |
| Logic Array Blocks | 2,625 |
| User I/Os | 131 |
| Embedded RAM | 282,624 bits |
| DSP Multipliers | 1 |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -5 |
| Temperature Grade | Industrial |
| Package Code | BFQFP |
| Total Terminals | 208 |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Tipe Mounting | Surface mount |
LFE2-20E-5Q208I square Diamant Konfigurasi Panduan
Konfigurasi pin untuk LFE2-20E-5Q208I (square pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LFE2-20E-5Q208I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LFE2-20E-5Q208I cocok untuk 6 aplikasis: Industrial Automation Controller, Test and Measurement Instrument, Communications Interface Module, Data Acquisition and Sensor Aggregation, Embedded Imaging Control, Programmable Signal Conditioning.
Industrial Automation Controller
The LFE2-20E-5Q208I fits industrial automation controllers that coordinate sensors, actuators, interlocks, and machine-control logic. Its 21,000 logic elements and 2,625 logic array blocks provide programmable capacity for sequencing and state-machine functions, while 131 user I/Os offer generous connections to discrete inputs and outputs. The 282,624 RAM bits support local buffering and data tables. Place the FPGA between field wiring and the system processor, and validate timing, I/O standards, and the 1.2 V core supply against the industrial operating requirements.
Direkomendasikan
Test and Measurement Instrument
The LFE2-20E-5Q208I can implement sequencing, acquisition control, data formatting, and instrument-bus logic in a programmable test system. Its 131 user I/Os support parallel interface signals, trigger lines, status indicators, and external converters, while one DSP multiplier provides a dedicated arithmetic resource for basic filtering or calibration calculations. The industrial-temperature ordering suffix supports equipment intended for extended industrial environments. Engineers should use the manufacturer timing documentation to establish clock domains and should reserve configuration logic for reliable startup after power is applied.
Direkomendasikan
Communications Interface Module
The LFE2-20E-5Q208I is suitable for communications equipment requiring parallel-to-serial adaptation, packet control, framing, and interface isolation. Its 21,000 logic elements can implement multiple protocol state machines, while 282,624 RAM bits provide FIFOs, packet buffers, and lookup tables. The 131 user I/Os allow direct connection to transceivers, memories, and parallel buses. Keep high-speed routing short, establish compliant I/O voltage levels, and validate the device against the required timing margin and industrial temperature conditions.
Direkomendasikan
Data Acquisition and Sensor Aggregation
The LFE2-20E-5Q208I can collect and route signals from multiple sensors, converters, or transducers through programmable digital logic. Its 131 user I/Os are useful for parallel sensor buses, chip-select signals, and control outputs, while the embedded RAM can hold sampled frames or intermediate results. One DSP multiplier supports a basic multiply-accumulate operation, although larger signal-processing workloads may require additional external processing. Match I/O thresholds, timing, and power sequencing to the acquisition board, and use the manufacturer I/O recommendations for reliable signal integrity.
Direkomendasikan
Embedded Imaging Control
The LFE2-20E-5Q208I can provide control-plane logic for cameras, image sensors, and industrial vision systems. The 21,000 logic elements are suitable for sensor initialization, frame timing, register sequencing, and interface adaptation, while 131 user I/Os permit direct control of multiple image-sensor and memory signals. The 282,624 RAM bits provide line buffers or configuration storage for moderate-resolution designs. Use dedicated clocking and I/O planning for high-rate pixel interfaces, and verify the industrial-temperature requirement when the camera operates in a harsh enclosure.
Direkomendasikan
Programmable Signal Conditioning
The LFE2-20E-5Q208I is applicable to programmable signal-conditioning and digital filter control where field programmability is valuable. Its 21,000 logic elements can implement filter control, coefficient sequencing, trigger logic, and data-path routing, while the single DSP multiplier supports a limited fixed-point processing function. The large 131-I/O count simplifies connection to multiple converter channels and digital control buses. Confirm numerical performance, clock frequency, and throughput in the device documentation, and treat the DSP resource as one available arithmetic block rather than a general-purpose processor.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LFE2-20E-5Q208I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LFE2-20E-6Q208C | LFE2-20E-6Q208I | LFE2-20E-5Q208C | LFE2-20E-4Q208I | LFE2-20E-4Q208C |
|---|---|---|---|---|---|---|
| Manufacturer | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP | 208-pin BFQFP |
| Logic Elements | 21,000 | 21,000 | 21,000 | 21,000 | 21,000 | 21,000 |
| User I/O | 131 | 131 | 131 | 131 | 131 | 131 |
| Embedded RAM | 282,624 bits | 282,624 bits | 282,624 bits | 282,624 bits | 282,624 bits | 282,624 bits |
| DSP Multipliers | 1 | 1 | 1 | 1 | 1 | 1 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -5 | -6 | -6 | -5 | -4 | -4 |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Industrial | Commercial |
Diferensiator Kunci
- Industrial-temperature ordering option in the 208-pin ECP2 package (vsLFE2-20E-6Q208C)
- One-grade lower speed designation with industrial temperature (vsLFE2-20E-6Q208I)
- Identical core and package resource configuration within the ECP2 family (vsLFE2-20E-5Q208C)
Catatan Desain
Route the 1.2 V core supply as a short, low-impedance network and place the required bypass capacitors close to the corresponding power pins. The 208-pin BFQFP footprint also requires deliberate escape routing between fine-pitch leads; use the manufacturer package drawing and land pattern rather than estimating dimensions from the generic QFP family.
Assign clock, configuration, and high-speed interface pins according to the ECP2 pin-description table before committing the board layout. Keep clock traces short, provide continuous reference planes where practical, and account for the 131 user I/Os plus dedicated power and configuration terminals when reviewing the 208-terminal package.
Do not substitute an ordering option solely because it uses the same 208-pin family. Speed grade and temperature grade are separate constraints: -6 is one grade above -5, while -4 is one grade below -5, and the I or C suffix changes the operating grade. Verify configuration compatibility, timing limits, and environmental requirements after every substitution.
Design the configuration path for reliable startup and recovery rather than assuming configuration is instantaneous. Confirm the supported configuration-memory interface, programming method, reset behavior, and pin assignments in the manufacturer documentation. Changes to bitstream format, speed grade, or device variant can affect the configuration procedure even when the physical package remains the same.
Informasi Konformitas
The component records identify the ECP2 FPGA and its industrial-temperature ordering suffix but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this catalog classification.
