LFE2-6SE-7F256C - 6K ECP2 420 MHz FPGA | Lattice
MPN: LFE2-6SE-7F256C ✓ AktifLFE2-6SE-7F256C Ringkasan
An FPGA is a programmable-logic semiconductor whose digital architecture is configured after fabrication. ECP2 devices combine configurable logic blocks, block RAM, programmable I/O, and dedicated high-speed serial resources in one device. The LFE2-6SE-7F256C therefore belongs to the programmable-logic hierarchy of FPGAs and CPLDs, providing a flexible platform for parallel data processing, control logic, communications, and embedded signal handling.
The principal device features include 6,000 logic cells organized into programmable logic resources, 190 user I/O, and 56,320 total RAM bits. Its 420 MHz system frequency supports timing-intensive designs, while the ECP2 S-Ser DSP capability expands the scope for serial interface and signal-processing implementations. The 1.2 V operating class aligns the core with low-voltage FPGA designs.
The device uses 90 nm process technology and a 256-FBGA package measuring 17 mm by 17 mm. A fully programmable architecture allows logic functions, interconnect paths, I/O standards, and embedded memory blocks to be defined in the device configuration rather than implemented as fixed application-specific circuitry. This flexibility shortens development cycles and supports product revisions that would otherwise require new mask sets.
Typical applications include industrial control and data acquisition, communications infrastructure, embedded video processing, interface bridging, and test equipment. The 190 available I/O positions suit systems combining multiple buses, status signals, and high-speed serial channels. Its 6,000-cell logic capacity is appropriate for compact control, protocol handling, and DSP-adjacent functions rather than exceptionally large accelerator designs.
Designers should treat power, configuration, clocking, signal integrity, and thermal requirements as an integrated package-level task. The 256-FBGA footprint requires a qualified escape-routing strategy, while the low core voltage requires careful rail design and decoupling. Confirm the exact pin assignments, supported I/O standards, configuration scheme, and bank power requirements in the manufacturer datasheet before layout release.
This product record combines device architecture, verified technical attributes, application guidance, package considerations, and same-footprint ECP2 alternatives. It is designed to help engineers identify whether the LFE2-6SE-7F256C provides the required logic, memory, I/O, speed, and package resources before beginning implementation.
Alternatif penggantian untuk LFE2-6SE-7F256C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LFE2-6SE-7F256C (sama faktor bentuk dan footprint) — berbeda di dalam Core Supply Voltage, Device Type, Lead-Free Status, Package.
LFE2-6SE-7FN256C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LFE2-6SE-8F256C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LFE2-6SE-8FN256C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LFE2-6E-7F256C
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LFE2-6E-8F256C
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LFE2-6E-5FN256C
✅ Drop-InKontak untuk harga
Lihat Datasheet →LFE2-6SE-7F256C Rating Maksimal & Karakteristik Listrik
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Cells | 6,000 cells |
| System Frequency | 420 MHz |
| User I/O | 190 pins |
| Total RAM | 56,320 bits |
| Programmable Logic Blocks | 750 LABs/CLBs |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| Process Technology | 90 nm |
| Paket | 256-FBGA |
| Package Body Size | 17 mm x 17 mm |
| Tipe Mounting | Surface mount |
| FPGA Family | ECP2 |
| Architecture | Programmable logic with embedded RAM and S-Ser DSP |
| Lead-Free Status | Lead-free |
LFE2-6SE-7F256C 17 mm x 17 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk LFE2-6SE-7F256C (17 mm x 17 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LFE2-6SE-7F256C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LFE2-6SE-7F256C cocok untuk 6 aplikasis: Industrial Control Systems, Communications Interface Equipment, Data Acquisition and Signal Conditioning, Embedded Video Processing, Test and Measurement Products, Programmable Logic Consolidation.
Industrial Control Systems
The LFE2-6SE-7F256C fits compact industrial controllers that combine deterministic control logic, serial communications, and multiple discrete interfaces. Its 6,000 logic cells and 56,320 RAM bits can hold control algorithms, state machines, protocol handlers, and data buffers, while 190 user I/O provide connections to sensors, actuators, counters, and communications transceivers. The 420 MHz system-frequency class provides timing margin for parallel control paths. In a practical design, the FPGA can consolidate multiple peripheral interfaces while reducing the number of supporting discrete logic devices. The 256-FBGA footprint also requires careful escape routing, power-integrity work around the 1.14 V to 1.26 V core supply, and thermal verification under worst-case switching activity. Confirm the required industrial temperature grade, I/O standards, isolation strategy, and functional-safety responsibilities for the final equipment.
Direkomendasikan
Communications Interface Equipment
The LFE2-6SE-7F256C is well suited to communications interface equipment requiring programmable framing, buffering, status handling, and multiple external data paths. The device combines 6,000 logic cells, 56,320 RAM bits, 190 user I/O, and ECP2 S-Ser DSP capability in a single 256-FBGA device. These resources can support protocol conversion, bridge control, transmit and receive buffering, and supervisory logic around external serializers or physical-layer devices. The 420 MHz system frequency allows timing-critical datapaths to be implemented without relying on a much larger FPGA. System planners should account for the 90 nm device’s power and thermal behavior, establish clean clock distribution, and use the manufacturer pin tables to assign S-Ser and parallel I/O resources correctly.
Direkomendasikan
Data Acquisition and Signal Conditioning
The LFE2-6SE-7F256C can implement the digital control, sampling sequencing, filtering, and data-packing functions around analog front ends. Its 190 user I/O support parallel ADC and DAC interfaces, digital sensors, capture triggers, and status signaling, while 56,320 RAM bits provide on-chip buffering for samples and control metadata. The programmable architecture allows acquisition sequences and data formats to be revised without changing the PCB. At a 420 MHz system-frequency class, the FPGA can accommodate time-critical sampling and control logic in a compact 256-FBGA implementation. Practical designs should use the manufacturer I/O standards and bank-power tables, terminate inputs correctly, and separate sensitive analog grounding from high-speed digital return paths. Final timing and signal-integrity verification should use the exact pin placement and board constraints.
Direkomendasikan
Embedded Video Processing
The LFE2-6SE-7F256C is appropriate for compact video-processing blocks that perform pixel routing, timing generation, overlay control, or interface adaptation. The 6,000 logic cells and 190 user I/O are useful for low-resolution pipelines, timing-reference generation, frame synchronization, and control of external video converters, while 56,320 RAM bits support line buffers and short working queues. Its 420 MHz system-frequency class supports parallel datapaths that must meet deterministic timing. Because the 256-FBGA device has a fine-pitch footprint, high-speed video traces require continuous return paths, carefully planned layer transitions, and verified terminations. The 1.2 V core class also makes rail decoupling and clock jitter performance important. Validate horizontal and vertical timing against the selected external video interface rather than relying only on functional simulation.
Direkomendasikan
Test and Measurement Products
The LFE2-6SE-7F256C fits compact test and measurement products that need flexible sequencing, pattern generation, status reporting, and multiple instrument-facing I/O channels. Programmable logic can implement acquisition control, trigger logic, data-format conversion, and self-test sequences, while the 56,320 RAM bits can hold calibration tables or measurement buffers. With 190 user I/O and a 420 MHz system-frequency class, the device supports parallel instrument control and moderately timed data paths without requiring a very large FPGA. The 256-FBGA package is practical for compact multichannel products, although fine-pitch assembly and simultaneous switching of many I/O require disciplined power and return-path design. Verify signal-integrity margins, clock jitter tolerance, and calibration stability across the full operating-temperature range of the finished instrument.
Direkomendasikan
Programmable Logic Consolidation
The LFE2-6SE-7F256C is useful when a design needs to consolidate several small programmable logic functions into one device. It can combine address decoding, FIFO-like buffers, protocol state machines, clock-domain crossing logic, interrupt handling, and peripheral adapters while exposing up to 190 user I/O. The 6,000-cell ECP2 architecture gives designers more flexibility than a fixed logic array without moving directly to a much larger FPGA. Its 420 MHz system-frequency class supports demanding control paths, and the 1.14 V to 1.26 V operating range supports modern low-voltage system design. Consolidation reduces component count but concentrates thermal and pin-routing pressure, so each I/O bank should be checked for simultaneous-switching noise. Preserve clean clocking, use separate filtering paths for sensitive inputs, and rerun timing after every pin assignment change.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LFE2-6SE-7F256C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LFE2-6SE-7FN256C | LFE2-6SE-8F256C | LFE2-6SE-8FN256C | LFE2-6E-7F256C | LFE2-6E-8F256C |
|---|---|---|---|---|---|---|
| Package | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| FPGA Family | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 |
| Logic Cells | 6,000 cells | 6,000 cells | 6,000 cells | 6,000 cells | 6,000 cells | 6,000 cells |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Diferensiator Kunci
- Closest documented same-package option (vsLFE2-6SE-7FN256C)
- Higher speed class retains the same resource footprint (vsLFE2-6SE-8F256C)
- SE-series feature level for embedded signal processing (vsLFE2-6E-7F256C)
Catatan Desain
Design the 1.14 V to 1.26 V core rail and every I/O bank around the voltage limits in the manufacturer datasheet. Place the required bulk and high-frequency decoupling capacitors at the corresponding power and ground balls using the package-specific recommended layout. Estimate the core and I/O power separately because simultaneous switching on many user outputs can materially increase dynamic current. Verify startup sequencing, rail tolerance, and brownout behavior in the complete power architecture.
Treat the 256-FBGA footprint as a fine-pitch routing problem rather than a generic FPGA layout. Follow the manufacturer ball-map and escape-routing guidance, maintain continuous return paths beneath high-speed nets, and route clocks before general-purpose signals. Account for assembly capability, solder-mask definition, via structure, and thermal-via requirements in the stack-up. Re-run signal-integrity and timing simulations after final pin placement because congestion can force routing changes that affect the 420 MHz system-frequency target.
Calculate dissipation from both static core power and dynamic switching activity, then compare the resulting junction temperature with the package thermal limits for the selected temperature grade. The 256-FBGA package can conduct heat through its ball array, but PCB copper and thermal vias remain important under sustained operation. Use the manufacturer power-estimation methodology for realistic activity factors and avoid placing heat-sensitive analog circuitry directly beneath the device without a thermal strategy.
Do not substitute an ECP2 ordering code solely because it has the same 256-FBGA outline. The E and SE series and their speed-grade suffixes can differ in timing, embedded resources, and configuration behavior. Before replacing the LFE2-6SE-7F256C with an LFE2-6E or higher-speed option, regenerate the project for the exact device, rerun timing, and confirm configuration, I/O, RAM, marking, and qualification requirements. Also verify the approved shipping format rather than inferring it from the package code.
Informasi Konformitas
The indexed comparison information identifies the LFE2-6SE-7F256C as lead-free. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status are not established by the indexed technical information and remain unknown.