LM258AYPT - Dual Low-Power Op Amp, 8-TSSOP | STMicroelectronics
MPN: LM258AYPT ✓ AktifLM258AYPT Ringkasan
An operational amplifier, commonly abbreviated op amp, is a high-gain analog building block that compares a differential input against a feedback-defined reference voltage. The LM258AYPT belongs to the dual low-power operational-amplifier family within the broader hierarchy of analog amplifiers, linear amplifiers, and integrated analog circuits. Its two channels can amplify independent signals or be combined in differential, filtering, instrumentation, and feedback-control topologies.
The principal device characteristics include two amplifier circuits per package, an 8-TSSOP surface-mount form factor, 1.1 MHz gain-bandwidth product, and 100 dB listed gain. The compact package allows dual-channel designs to occupy less board area than two separate single-amplifier packages. Its low-power designation makes it appropriate for battery-operated instruments, industrial transducers, control systems, and power-conscious analog interfaces.
Because the LM258 family is intended for general-purpose operation, engineers commonly select it for audio-frequency signal conditioning, current monitoring, sensor buffers, active filtering, and low-to-moderate-frequency feedback loops. The manufacturer datasheet is the controlling document for input common-mode range, output swing, output current, supply current, noise, stability requirements, and recommended external components. Designers should verify those limits against the actual supply voltage and signal amplitude before finalizing a high-impedance or capacitive-load design.
Typical installations place one amplifier in a feedback stage and the other in a matching buffer, gain stage, or comparator-style threshold circuit. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should be kept away from switching nodes. The dual format is particularly useful when a system requires symmetric analog channels, such as differential sensing, bridge-amplifier interfaces, or dual-axis transducer conditioning.
A key design trade-off is that a general-purpose amplifier may not provide rail-to-rail input or output operation. Confirm the usable input range and output swing against the chosen supply, especially in single-supply systems whose signals remain close to ground. Confirm stability with capacitive loads and validate noise, offset, and bandwidth requirements before committing to production quantities.
This page combines package, pricing, sourcing, replacement, and design guidance for LM258AYPT. It organizes the practical considerations engineers need when comparing this TSSOP dual amplifier with related STMicroelectronics devices and when planning board layout, supply bypassing, signal conditioning, and lifecycle sourcing.
Alternatif penggantian untuk LM258AYPT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM258AYPT (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Package, Input Bias Current, Number of Amplifiers.
LM258YPT
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM258AWYST
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM2904AYPT
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM2904YPT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM358AYPT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM258AYPT Rating Maksimal & Karakteristik Listrik
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| Number of Channels | 2 independent channels |
| Gain-Bandwidth Product | 1.1 MHz |
| DC Gain | 100 dB |
| Paket | 8-pin TSSOP |
| Tipe Mounting | Surface mount |
LM258AYPT 8-pin tssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk LM258AYPT (8-pin tssop pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk LM258AYPT.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LM258AYPT cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Precision Current Monitoring, Active Audio and Low-Frequency Filters, Data Acquisition Front End, Battery-Powered Measurement Instruments, Feedback Control and Error Amplifier Circuits.
Industrial Sensor Signal Conditioning
The LM258AYPT fits industrial sensor interfaces that require two low-level analog channels in a compact package. One channel can provide gain around the sensor while the second buffers the result for an analog-to-digital converter or controller input. Its listed 1.1 MHz gain-bandwidth product is adequate for many low-to-moderate-frequency process signals, while the 8-pin TSSOP simplifies routing on densely populated control boards. Because common-mode range, input bias current and offset depend on the sensor impedance and supply level, engineers should compare those limits with the manufacturer datasheet before selecting the gain resistors.
Direkomendasikan
Precision Current Monitoring
The LM258AYPT is appropriate for conditioning a shunt or sensor-derived voltage when a dual amplifier can provide gain and active filtering in one package. The 1.1 MHz gain-bandwidth product allows useful closed-loop bandwidth at moderate gain, and the two-channel arrangement reduces the number of analog ICs required. A practical design should keep the shunt connection compact, verify the input offset and bias-current contribution, and include filtering that prevents the amplifier from amplifying unwanted high-frequency components. Use the manufacturer datasheet to establish resistor limits, output-drive capability and stable feedback values.
Direkomendasikan
Active Audio and Low-Frequency Filters
The LM258AYPT can implement active filters or audio preamplifier stages where a compact dual low-power amplifier is preferred. Its 1.1 MHz gain-bandwidth product provides adequate loop gain for many first- or second-order sections operating well below the megahertz range. One channel may form a low-pass or band-pass section while the other provides buffering for an ADC input. Component tolerance and op-amp open-loop gain determine the achieved Q and center frequency, so simulate the final network, verify output swing and check stability with the intended source and load impedances.
Direkomendasikan
Data Acquisition Front End
The LM258AYPT suits a data-acquisition board that needs differential sensing, gain and channel buffering in a limited PCB area. Its two independent channels can process complementary sensor lines, allowing a differential-to-single-ended conversion when feedback is configured correctly. The 100 dB listed DC gain and 1.1 MHz gain-bandwidth product provide a useful starting point for moderate-frequency measurements, but offset, bias current and common-mode range govern accuracy at the front end. Place the device close to the analog connector, use shielded routing where appropriate and follow the manufacturer's recommended decoupling arrangement.
Direkomendasikan
Battery-Powered Measurement Instruments
The LM258AYPT is a candidate for portable measurement equipment because it combines two low-power general-purpose amplifier channels in one 8-pin TSSOP. A battery-operated instrument can use one channel to amplify a transducer signal and the other as an active buffer, reducing board area and component count. Low power alone does not guarantee a specified battery life, so confirm the device's supply-current behavior in the manufacturer datasheet. Also account for the quiescent current of the converter, analog switches and measurement microcontroller when calculating the complete power budget.
Direkomendasikan
Feedback Control and Error Amplifier Circuits
The LM258AYPT can serve as an error amplifier or loop-comparator element in a linear feedback-control design. Its general-purpose dual-amplifier architecture supports closed-loop voltage regulation, motor-position conditioning or analog limit detection, provided the operating point remains inside the published input and output ranges. The 1.1 MHz gain-bandwidth product sets the frequency range available for loop shaping, while compensation and noise determine practical response. Review the manufacturer application circuits for stability, then calculate worst-case output swing and supply headroom across temperature rather than designing only at room temperature.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM258AYPT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Consider LM2904AYPT or LM2904YPT when their input common-mode range and output characteristics better fit the circuit, but review every substitution for offset, bandwidth, stability and qualification changes. LM358AYPT is another same-family dual option when its offset and bias-current behavior provide a better match. In every case, verify the pinout, supply range, input range and output swing in the manufacturer datasheet. The shared TSSOP footprint simplifies PCB reuse, but a package match alone does not guarantee electrical compatibility.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM258YPT | LM258AWYST | LM2904AYPT | LM2904YPT | LM358AYPT |
|---|---|---|---|---|---|---|
| Package | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Number of Amplifier Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Automotive-Grade Ordering Suffix | A suffix | No A suffix | A suffix with different ordering code | A suffix | No A suffix | A suffix |
| Low-Power Designation | Yes | Yes | Yes | Yes | Yes | Yes |
| Pin-to-Pin Compatibility Basis | 8-pin TSSOP dual-op-amp footprint | Same family and package | Consistent terminals and packages | Same dual-op-amp package arrangement | Same dual-op-amp package arrangement | Same dual-op-amp package arrangement |
Diferensiator Kunci
- Two general-purpose amplifier channels in an 8-pin TSSOP (vsLM358AYPT)
- Documented consistent terminals and packages with a related replacement (vsLM258AWYST)
- Automotive-oriented A-grade ordering option (vsLM258YPT)
- General-purpose LM258 architecture rather than LM2904 characteristics (vsLM2904AYPT)
Catatan Desain
Place the supply bypass capacitor directly across the LM258AYPT supply and ground pins, keeping the input and output return current in a compact loop. Follow the manufacturer datasheet for the recommended capacitor values and ESR limits. If the amplifier is driven by a switching converter, add local high-frequency bypassing and route the capacitor connection before the supply trace branches toward other circuits.
Route each non-inverting input as a short, guarded trace and keep feedback resistors close to the relevant channel. In dual-amplifier layouts, separate the two channels as much as practical so current in one amplifier's output stage does not couple into the other input. Avoid routing inputs beneath the package, next to switching-node copper or parallel to high-current supply conductors.
Do not assume rail-to-rail input or output behavior. Check the signal's common-mode level and required output swing against the LM258AYPT electrical limits for the selected supply voltage, including worst-case temperature conditions. Also verify offset and input bias current when the source impedance is high, and confirm stability with the intended capacitive load and output network.
For sensor interfaces, compare the amplifier input bias current with the sensor's effective output impedance to avoid gain errors. Place gain-setting resistors where their thermal variation and leakage remain controlled. If the source has substantial capacitance, use the manufacturer's stability guidance or isolate it with a small isolation resistor; do not reduce capacitance arbitrarily without checking the amplifier's transient response.
Informasi Konformitas
The A-grade ordering code indicates an automotive-oriented option, but no explicit AEC-Q100, RoHS, REACH, lead-free or halogen-free statement is listed for this exact ordering code.