LM2924M Low-Power Op Amp/Comparator | Texas Instruments
MPN: LM2924M ✓ AktifLM2924M Ringkasan
An operational amplifier is a voltage amplifier whose closed-loop gain is established by an external feedback network. A voltage comparator compares two input voltages and switches its output according to their relationship. The LM2924M combines these complementary functions in a single analog device, placing it in the operational-amplifier and comparator hierarchy while supporting transducer, sensing, control, and signal-conditioning applications.
The internally frequency-compensated operational amplifier is designed to operate without an external compensation capacitor, simplifying implementation in basic gain configurations. Its comparator section provides an independent decision-making channel, allowing the two internal circuits to monitor or condition separate signals simultaneously. Because the amplifier and comparator are independent building blocks, their inputs and outputs can be used for different stages of a system.
The National Semiconductor datasheet describes the LM2924M as a low-power operational amplifier and voltage comparator for precision voltage-amplification and related analog signal-processing needs. The 8-pin SOIC package provides a compact surface-mount format for industrial equipment, embedded controls, instrumentation interfaces, and mixed analog-digital circuit boards.
Typical applications include transducers whose weak outputs require voltage amplification, sensor interfaces requiring a defined switching threshold, industrial control loops, and analog monitoring subsystems. The dual internal architecture can reduce board area when a design needs both continuous analog amplification and discrete threshold detection.
For PCB implementation, assign the supply, ground, input, and output pins according to the manufacturer pin-description table and preserve the recommended input/output operating conditions. Confirm signal ranges, output states, stability requirements, and temperature limits against the device datasheet before connecting external transducers or logic interfaces.
This page combines the device architecture, package details, sourcing guidance, verified replacement constraints, and practical application guidance. It also distinguishes confirmed drop-in choices from merely similar amplifier or comparator products, helping engineers avoid replacements that require PCB changes or behavioral redesign.
Alternatif penggantian untuk LM2924M — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
LM2924N
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM392N
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM2924M Rating Maksimal & Karakteristik Listrik
| Device Type | Low-power operational amplifier/voltage comparator |
| Internal Circuit Count | 2 independent building blocks |
| Operational Amplifier Gain | High gain |
| Operational Amplifier Compensation | Internally frequency compensated |
| Comparator Type | Precision voltage comparator |
| Temperature Grade | Industrial |
| Paket | 8-pin SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| Number of Terminals | 8 |
| Tipe Mounting | Surface mount |
| Typical Application | Precision voltage amplification |
LM2924M rectangular Diamant Konfigurasi Panduan
Konfigurasi pin untuk LM2924M (rectangular pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk LM2924M.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LM2924M cocok untuk 6 aplikasis: Precision Transducer Signal Conditioning, Industrial Threshold Detection, Sensor Interface and Alarm Circuit, Low-Power Analog Control Module, Precision Voltage Reference Comparison, Embedded Analog Measurement Front End.
Precision Transducer Signal Conditioning
The LM2924M is suitable for conditioning a weak transducer signal because its high-gain operational-amplifier section provides a straightforward path from a sensor voltage to a scaled analog output. The internally frequency-compensated amplifier simplifies the basic gain stage, while the independent precision comparator can establish an alarm or control threshold. In a complete instrument, the comparator may monitor the conditioned signal while the amplifier performs linear scaling. The 8-pin SOIC footprint also supports compact analog boards. Before implementation, confirm the input range, output swing, stability at the intended gain, supply voltage, and temperature limits in the National Semiconductor datasheet.
Direkomendasikan
Industrial Threshold Detection
The LM2924M fits industrial monitoring circuits that require a precision comparator alongside a separate analog signal path. The comparator section can compare a process or sensor voltage against a reference, while the operational amplifier can amplify a related low-level measurement. These independent functions allow one IC to serve both detection and conditioning roles without combining the outputs electrically. In an industrial controller, the comparator result might represent a limit state and the amplifier result might feed an analog measurement channel. Verify the device’s supply range, input common-mode limits, output levels, and environmental requirements before deployment.
Direkomendasikan
Sensor Interface and Alarm Circuit
The LM2924M can support a sensor interface that needs both proportional measurement and a binary alarm indication. Its internally compensated operational-amplifier section may amplify a sensor voltage, while the precision comparator can determine when the measured value crosses a selected threshold. This arrangement is useful in compact monitoring equipment where board area and component count matter. The surface-mount 8-pin SOIC package can be placed close to the sensor connector to reduce sensitive-trace length. Confirm actual bias-point behavior, output drive, noise performance, and logic compatibility with the manufacturer specifications before finalizing the analog interface.
Direkomendasikan
Low-Power Analog Control Module
The LM2924M is appropriate for a low-power analog control module that processes a control-voltage signal and also checks its operating state. The operational-amplifier section can establish the working signal, while the comparator section can independently identify a condition requiring intervention by the controller. Because both sections are housed in one 8-pin SOIC, the design can avoid two separate analog packages when the circuit topology permits. Typical uses include equipment control, compact sensor nodes, and low-level monitoring boards. Validate the device’s supply-current behavior and input/output ranges for the intended duty cycle, and use the pin table to confirm that the two sections remain electrically independent.
Direkomendasikan
Precision Voltage Reference Comparison
The LM2924M’s precision comparator section can be used to compare a measured voltage with a stable reference and generate a logic-level indication of their relationship. Its operational-amplifier section can separately condition the measurement or reference path. This separation is valuable in instrumentation that requires both an analog value and a high-versus-low decision. For laboratory or process-control equipment, the circuit can use the comparator result as an alert while retaining the amplified signal for measurement. The manufacturer datasheet should define the actual comparison accuracy, input offset, output behavior, and supply requirements; those limits determine whether the architecture meets the required measurement precision.
Direkomendasikan
Embedded Analog Measurement Front End
The LM2924M can form the analog front end of an embedded measurement system by amplifying one sensor-derived voltage and comparing another with a limit. The amplifier output may connect to an ADC or control input, while the comparator output may provide a fast discrete event signal. This partition of functions is especially useful in mixed-signal embedded designs that need threshold information without waiting for periodic conversion. The 8-pin SOIC package supports conventional surface-mount assembly and compact board partitioning. Check signal levels, crossover timing, output saturation behavior, and supply compatibility with the rest of the embedded controller before releasing the schematic.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM2924M — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM2924N | LM392N |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Function | Low-power operational amplifier and voltage comparator | Low-power operational amplifier and voltage comparator | Low-power dual amplifier-comparator |
| Internal Circuit Count | 2 independent building blocks | 2 independent building blocks | 2 independent building blocks |
| Comparator Precision | Precision voltage comparator | Precision voltage comparator | Precision voltage comparator |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| Number of Terminals | 8 | 8 | 8 |
Diferensiator Kunci
- Combines two independent analog functions in one package (vsLM392N)
- Industrial temperature grade supports a wider application class (vsLM2924N)
- Simplifies basic amplifier implementation (vsTLV2402ID)
Catatan Desain
Place the device close to the transducer input or measurement node to minimize sensitive analog trace length. Route the amplifier and comparator signal paths away from switching nodes and high-current return paths. Keep the manufacturer’s pin-description table open during layout so that the amplifier section, comparator section, supply, and ground connections are assigned correctly on the 8-pin SOIC footprint.
Do not assume that every dual amplifier-comparator IC is pin-compatible with the LM2924M. Confirm pin numbers, input polarity, output behavior, supply range, and temperature grade before substitution. In particular, the LM2924M is industrial grade, so replacing it with a lower-temperature family variant can narrow the acceptable environmental range even when the package matches.
Use a low-noise reference and short routing for precision comparison applications. The comparator can amplify small differences near its threshold, so supply disturbance, ground offset, and input overshoot may affect decision accuracy. Check the manufacturer’s recommended supply decoupling and input limits, and ensure the comparator output remains compatible with the following digital or control stage.
Confirm the supply voltage and total current before assigning the LM2924M to a low-power board. The device contains both an operational amplifier and a comparator, so the complete circuit must account for the load presented by both sections, external feedback components, and downstream logic. Add the required local supply bypass capacitance close to the device according to the manufacturer guidance.
Informasi Konformitas
No specific RoHS, REACH, halogen-free, lead-free, or conflict-minerals status is stated in the product documents. AEC-Q100 is not applicable because this is an industrial analog IC rather than an automotive-qualified device.