LPC11E68JBD48E - 50MHz Cortex-M0+ 256KB MCU | NXP
MPN: LPC11E68JBD48E ✓ AktifLPC11E68JBD48E Ringkasan
A microcontroller is a compact programmable system containing a processor core, nonvolatile program memory, volatile data memory, and integrated peripherals. The LPC11Exx family combines a simple instruction set with 32-bit processing, enabling efficient control firmware for industrial, embedded-control, communications, and sensing products. Its low-cost positioning helps reduce system complexity when a more capable processor is unnecessary.
The LPC11E68JBD48E provides 256 KB of flash for firmware and 36 KB of SRAM for working data. A 50 MHz CPU clock supports responsive execution of control tasks, state machines, and communication routines. The 48-LQFP package provides 48 external connections and a 7 x 7 mm body size, making the device appropriate for compact boards assembled with conventional leaded surface-mount processes.
The Arm Cortex-M0+ architecture uses a compact instruction set designed for embedded applications. Compared with an 8-bit MCU, the 32-bit architecture offers a larger addressing space and higher processing throughput. The NXP LPC11Exx family is specifically positioned as a cost-conscious bridge between conventional 8-bit and 16-bit controllers and more complex 32-bit processors.
Typical uses include industrial equipment controllers, sensor-interface systems, building automation, compact communication modules, and low-cost consumer appliances. A design can use the 256 KB flash region for application firmware and the 36 KB SRAM for working variables, buffers, and peripheral data. The 50 MHz operating frequency also permits moderate protocol handling and real-time control without moving to a higher-power processor class.
PCB design should preserve short return paths for power and ground and place decoupling capacitors close to the supply pins. Because the package has 48 gull-wing leads, assembly and inspection are simpler than with fine-pitch BGA packages, although board area remains greater than for a compact leadless package. Confirm the complete pin assignment, voltage limits, and peripheral multiplexing in the NXP datasheet before layout release.
This product page combines the exact LPC11E68JBD48E configuration, package details, lifecycle information, compatible family alternatives, and application-focused design guidance to support component selection and PCB implementation without relying on generic microcontroller descriptions.
Alternatif penggantian untuk LPC11E68JBD48E — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LPC11E68JBD48E (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, Architecture, Flash Memory, SRAM.
LPC11U68JBD48E
✅ Drop-InKontak untuk harga
Lihat Datasheet →LPC11U67JBD48E
✅ Drop-InKontak untuk harga
Lihat Datasheet →LPC11U66JBD48E
✅ Drop-InKontak untuk harga
Lihat Datasheet →LPC11E68JBD48E Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| Bit Width | 32 bit |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| Static RAM | 36 KB |
| Paket | 48-LQFP (7 x 7 mm) |
| Jumlah Pin | 48 pins |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Tipe Mounting | Surface mount |
| Temperature Grade | Industrial |
| Series | LPC11Exx |
| Core Architecture | Arm Cortex-M0+/M0 |
| Status Lingkungan Hidup | Active |
LPC11E68JBD48E square Diamant Konfigurasi Panduan
Konfigurasi pin untuk LPC11E68JBD48E (square pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LPC11E68JBD48E.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LPC11E68JBD48E cocok untuk 6 aplikasis: Industrial Equipment Controller, Sensor Interface and Data Acquisition, Building Automation Node, Compact Communication Module, Low-Cost Consumer Appliance Control, Motor and Actuator Control.
Industrial Equipment Controller
The LPC11E68JBD48E fits compact industrial equipment controllers that require deterministic control from a 50 MHz Arm Cortex-M0+ core. Its 256 KB of flash can hold the main operating firmware, configuration tables, and diagnostic routines, while 36 KB of SRAM supports stack space, state variables, and communication buffers. The 48-LQFP package provides 48 externally accessible leads for power, interfaces, control signals, and programming access. Because the part is listed as industrial grade, it is a sensible starting point for machinery controls, condition monitoring, actuator systems, and compact automation modules. Final qualification still requires checking the exact electrical limits and operating-temperature range in the NXP manufacturer data sheet.
Sensor Interface and Data Acquisition
The LPC11E68JBD48E is suitable for sensor hubs that must sample inputs, manage device state, and format measurements for a higher-level system. Its 50 MHz Cortex-M0+ core provides more processing capability than a typical 8-bit controller, while 36 KB of RAM can accommodate measurement buffers and communication state. The 256 KB flash region is large enough for calibration information and application firmware without external program memory. In this design, the microcontroller can sit between analog or digital sensors and a serial communications link, providing timestamped data handling and device diagnostics. Confirm the required peripheral pins and analog functions against the manufacturer pin table before assigning connections.
Building Automation Node
The LPC11E68JBD48E can support compact building-automation nodes that coordinate lighting, environmental sensing, access functions, or motorized equipment. A 50 MHz processor provides enough execution bandwidth for multiple control states and protocol routines, while the 256 KB flash capacity accommodates firmware and configuration. Its 36 KB SRAM allows the device to maintain temporary sensor readings, schedules, and command queues. The 7 x 7 mm LQFP package is practical for boards that require a pin-rich controller and conventional leaded-package assembly rather than a very small BGA footprint. When selecting it for a building node, verify supply requirements, low-power behavior, and peripheral availability in the NXP documentation.
Compact Communication Module
The LPC11E68JBD48E can serve as the control processor in a compact communication module that manages framing, local configuration, diagnostics, and host-facing commands. The 50 MHz Arm Cortex-M0+ core offers adequate throughput for lightweight protocol processing, while 36 KB of SRAM provides working memory for packet buffers and state variables. Firmware, protocol tables, and upgrade metadata can be stored in the 256 KB flash area, reducing the need for an external memory device in space-constrained products. The 48-LQFP package supports a straightforward PCB layout with power, programming, reset, and interface routing. Use the manufacturer data sheet to confirm the exact serial-interface resources and pin multiplexing required by the selected communication standard.
Low-Cost Consumer Appliance Control
The LPC11E68JBD48E is appropriate for cost-sensitive consumer products that need more control capability than an 8-bit MCU without requiring a high-end application processor. Its 256 KB of flash supports feature firmware, operating profiles, and diagnostic logic, and its 36 KB of SRAM handles control variables and short-lived data. The 50 MHz execution rate allows responsive handling of user inputs, indicators, relays, and internal sequences. Its industrial-grade designation and 48-LQFP package also make it usable in compact appliance-control boards assembled with leaded SMD tooling. Before finalizing the design, verify the device's electrical operating limits, power-consumption profile, and required external passives using the NXP manufacturer documentation.
Motor and Actuator Control
The LPC11E68JBD48E can coordinate simple motor, relay, and actuator functions in a compact embedded-control product. Its 50 MHz Cortex-M0+ core supports fast state-machine execution, timing tasks, and protection logic, while the 256 KB flash region stores motion profiles, calibration constants, and control firmware. Up to 36 KB of SRAM is available for counters, command buffers, and supervisory state. The 48-LQFP footprint exposes enough pins for control outputs, sensing inputs, programming, and communication. Because the LPC11E68JBD48E is a general-purpose microcontroller, external driver circuitry may still be required for higher-current loads. Validate timing, pin multiplexing, and protection requirements against the manufacturer data sheet.
Data referensi engineering untuk LPC11E68JBD48E — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LPC11U68JBD48E | LPC11U67JBD48E | LPC11U66JBD48E |
|---|---|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Bit Width | 32 bit | 32 bit | 32 bit | 32 bit |
| USB-Oriented Family Feature | No U-series designation | Yes | Yes | Yes |
| Pin Count | 48 pins | 48 pins | 48 pins | 48 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
Diferensiator Kunci
- Matches the related U68 candidate on core frequency and flash capacity (vsLPC11U68JBD48E)
- Uses a pin-rich 7 x 7 mm LQFP for external control connectivity (vsLPC11U68JBD48E)
- Targets non-U-series cost-sensitive embedded control (vsLPC11U66JBD48E)
Catatan Desain
Assign all 48 lands directly from the NXP 48-LQFP package drawing and preserve pin-1 orientation using the package marker. Place input and bulk decoupling capacitors close to their associated power pins, with each capacitor return connected to the nearest ground plane via a short path. The 7 x 7 mm body is compact, but the gull-wing leads extend beyond it, so allow clearance for lead-to-lead inspection and soldering.
Use the manufacturer data sheet to determine the exact supply range and decoupling requirements for every operating mode. Keep the 50 MHz power rail clean and route it before sensitive signal paths. If the design combines switching converters with this controller, use separate placement zones and verify the resulting supply ripple at the MCU pins rather than assuming the nominal regulator output is sufficient.
Reserve the programming and debug connections before finalizing the board outline, and route programming signals away from noisy motor or relay drive stages. The 256 KB flash and 36 KB SRAM do not remove the need for disciplined signal layout: high-speed edges can radiate even at a 50 MHz clock. Use a continuous ground plane, avoid split planes beneath the MCU, and keep switching-node copper away from clock, reset, and communication inputs.
Do not substitute LPC11U68JBD48E solely because the 48-LQFP outline and processor frequency match. The U-series feature set differs, and pin multiplexing, firmware drivers, and peripheral assignments may also change. Review the manufacturer data sheets for every migrated device, recompile with the appropriate startup and peripheral configuration, and test programming, clocking, interrupts, communication, and low-power behavior before production approval.
Informasi Konformitas
The manufacturer lists the LPC11E68JBD48 device as active and identifies industrial-grade temperature classification, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the referenced product information.