M2GL025TS-VF400 - 27.6K LEs, 207 I/O IGLOO2 FPGA | Microchip
MPN: M2GL025TS-VF400 ✓ AktifM2GL025TS-VF400 Ringkasan
An FPGA is a reconfigurable semiconductor in which digital logic, interfaces, and signal-processing functions are defined through a programmable configuration file. Within the product hierarchy, the M2GL025TS-VF400 is an IGLOO2 FPGA, a low-density member of the IGLOO2 family, and part of the broader programmable-logic and semiconductor categories. This hierarchy places the device between fixed-function digital integrated circuits and higher-density programmable-logic devices, offering a flexible implementation path for control, interface, and glue-logic designs.
The device’s defining resource is its 27.6K logic elements, accompanied by 207 user I/O in the VF400 package. The high I/O count allows compact systems to combine multiple interface standards and external bus functions on one device. The manufacturer identifies IGLOO2 devices as low-density flash FPGAs intended for general-purpose functions, including Gigabit Ethernet and dual PCI Express control planes, bridging, I/O expansion and conversion, video and image processing, system management, and secure connectivity.
The “TS” and “VF400” suffixes distinguish this orderable configuration from related speed-grade, temperature-grade, and package or tape-and-reel variants in the IGLOO2 family. Designers should therefore validate the complete ordering code rather than treating every 400-ball IGLOO2 device as electrically identical. Configuration-device selection, programmed bitstream generation, pin constraints, and board-level power requirements must all be checked against the manufacturer’s device documentation before release to manufacturing.
Typical applications include protocol bridging, industrial and communications equipment, secure network interfaces, embedded control systems, video capture or processing modules, and systems that need programmable logic alongside a host processor. In these systems, the FPGA can absorb changing interface logic, implement parallel-to-serial or protocol conversion, expand I/O, or implement control-plane functions while preserving flexibility after initial hardware design.
The primary design consideration is package complexity. A 400-LFBGA requires careful PCB escape routing, controlled-impedance layout, dense via structures, and assembly processes suitable for fine-pitch ball-grid-array packages. Power, ground, configuration, programming, and I/O connectivity should follow the manufacturer’s pin and board-layout guidance, with thermal and signal-integrity performance validated in the final board stack-up.
This product page combines the verified IGLOO2 resource, I/O, package, family positioning, and application data with drop-in family alternatives, practical PCB considerations, and structured selection guidance. It is intended to help engineers narrow the correct ordering suffix before downloading the datasheet, programming the device, and releasing the assembled design.
Alternatif penggantian untuk M2GL025TS-VF400 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
M2GL025TS-VF400I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
M2GL025TS-1VF400
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
M2GL025TS-1VF400I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
M2GL025TS-1VFG400T2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
M2GL025TS-VF400 Rating Maksimal & Karakteristik Listrik
| Device Type | Low-density flash field-programmable gate array (FPGA) |
| FPGA Family | IGLOO2 |
| Logic Elements | 27.6K LEs |
| User I/O Count | 207 I/O |
| Paket | 400-LFBGA |
| Tipe Mounting | Surface mount |
| Configuration Memory Type | Flash |
| Product Series | M2GL025TS |
| Package Suffix | VF400 |
M2GL025TS-VF400 vf400 Diamant Konfigurasi Panduan
Konfigurasi pin untuk M2GL025TS-VF400 (vf400 pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk M2GL025TS-VF400.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
M2GL025TS-VF400 cocok untuk 6 aplikasis: Gigabit Ethernet Control Plane, PCI Express Control Plane, Protocol Bridging, Video and Image Processing, Industrial I/O Expansion, Secure Connectivity and System Management.
Gigabit Ethernet Control Plane
The M2GL025TS-VF400 fits control-plane FPGA logic because the manufacturer identifies Gigabit Ethernet applications for IGLOO2 and the device provides 27.6K logic elements with 207 I/O. Its programmable I/O resources can support packet-header processing, register-based status monitoring, flow control, and board-level management beside a network PHY or higher-level processor. The design must allocate pins for the selected Ethernet interface, clocking, configuration access, and system control. Timing closure depends on the external transceiver, reference clock, board trace characteristics, and device speed grade, so the complete suffix and pin constraints should be confirmed before layout.
Direkomendasikan
PCI Express Control Plane
The M2GL025TS-VF400 is applicable to dual PCI Express control-plane logic because IGLOO2 is identified for that general-purpose function. The 27.6K logic elements can implement protocol-related control, status, configuration, and data-path coordination while the 207 I/O provide substantial board-level connectivity. A practical implementation separates clocked interface logic, configuration control, reset sequencing, and monitoring functions. Engineering review must confirm the PCI Express electrical interface strategy, device speed grade, I/O voltage domains, reference-clock requirements, and whether the selected IGLOO2 resource set satisfies the intended lane width and transaction logic.
Direkomendasikan
Protocol Bridging
The M2GL025TS-VF400 is well suited to protocol bridging because programmable logic can translate between parallel, serial, and device-specific interfaces while 207 I/O reduce the need for external bridge devices. Its 27.6K logic elements can support state machines, framing logic, buffering, and interface conversion in a compact package. The implementation should define clock domains early, use the manufacturer’s I/O standards and timing constraints, and budget registers and logic for arbitration or flow control. Board validation should include source-synchronous routing, impedance control, reset sequencing, and corner-case timing across the selected speed and temperature grades.
Direkomendasikan
Video and Image Processing
The M2GL025TS-VF400 supports video and image-processing functions because the manufacturer explicitly lists this application for IGLOO2. Its 27.6K logic elements and 207 I/O can accommodate parallel pixel interfaces, control logic, timing generation, color or format conversion, and pre-processing stages in a compact implementation. Actual performance depends on the supported I/O standards, external memory or sensor interface, clock rate, and logic utilization. Engineers should establish a representative resource estimate, verify timing closure with the actual pin assignment, and use synchronous clocking and controlled-impedance routing to prevent data corruption between the image source and downstream processor.
Direkomendasikan
Industrial I/O Expansion
The M2GL025TS-VF400 is a practical fit for industrial I/O expansion because its 207 I/O allow numerous external signals to be collected, conditioned digitally, and presented to a host processor or other controller. The 27.6K logic elements can implement acquisition control, debouncing, encoding, fault capture, and status multiplexing while the flash FPGA architecture supports field-programmable logic updates. Industrial deployment requires attention to the selected temperature grade, isolation boundaries, surge protection, grounding, and fail-safe behavior. Validate every interface voltage against the device specifications and isolate external industrial wiring from sensitive FPGA pins before hardware release.
Direkomendasikan
Secure Connectivity and System Management
The M2GL025TS-VF400 can support secure-connectivity and system-management functions because IGLOO2 devices are intended for programmable security, monitoring, and control logic. The 27.6K logic elements can implement boot control, key-handling interfaces, status monitoring, power sequencing, and communication front ends while the 207 I/O connect sensors, memory, and management controllers. Security-sensitive designs should review the device’s cryptographic capabilities, configuration-protection options, and update process in the manufacturer documentation. Board-level implementation also requires protected programming access, controlled boot configuration, accurate reset behavior, and separation of trusted logic from external communication paths.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk M2GL025TS-VF400 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | M2GL025TS-VF400I | M2GL025TS-1VF400 | M2GL025TS-1VF400I | M2GL025TS-1VFG400T2 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA | 400-LFBGA - same package family | 400-LFBGA - same package family | 400-LFBGA - same package family | 400-LFBGA - same package family |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 27.6K LEs | 27.6K LEs | 27.6K LEs | 27.6K LEs | 27.6K LEs |
| User I/O Count | 207 I/O | 207 I/O | 207 I/O | 207 I/O | 207 I/O |
| Configuration Memory Type | Flash | Flash | Flash | Flash | Flash |
| Ordering-Suffix Difference | Standard TS speed and temperature ordering code | I temperature-grade suffix | 1 speed-grade suffix | 1 speed-grade and I temperature-grade suffixes | 1 speed-grade and T2 packing suffixes |
| General-Purpose Application Coverage | Bridging, I/O expansion and conversion, control-plane logic, video/image processing, system management, secure connectivity | IGLOO2 family application coverage | IGLOO2 family application coverage | IGLOO2 family application coverage | IGLOO2 family application coverage |
Diferensiator Kunci
- Standard ordering option within the 27.6K-logic-element IGLOO2 family (vsM2GL025TS-VF400I)
- Higher-speed family option for timing-sensitive designs (vsM2GL025TS-1VF400)
- Simultaneous speed and temperature ordering coverage (vsM2GL025TS-1VF400I)
Catatan Desain
Treat the VF400 package as a fine-pitch, high-ball-count assembly rather than a conventional perimeter package. Follow the manufacturer’s ball-map and PCB land-pattern guidance exactly, including ball pitch, pad geometry, solder-mask definition, and exposed thermal or power connections. Escape routing for 207 user I/O and power distribution must be planned before placement; congested escape paths can make the design difficult to assemble and produce avoidable continuity defects.
Assign external clock and high-speed interface pins early because the M2GL025TS-VF400 offers 207 I/O but the selected board stack-up determines whether every interface can meet timing and signal-integrity requirements. Use short reference-clock routes, continuous return paths, and manufacturer-recommended I/O standards. Validate source-synchronous and differential interfaces with the intended PCB stack-up, including crosstalk, loss, and timing margin at the required operating speed.
Separate configuration, programming, reset, clock, and high-speed interface routing from sensitive or noisy nets, and place decoupling and clock-support components close to their associated balls. Establish a deliberate power and ground partitioning scheme before routing the dense BGA area. Review escape paths against the assembly rules of the selected PCB manufacturer, since a nominal schematic assignment does not guarantee practical access to every ball.
Informasi Konformitas
The manufacturer product page and family listings do not state the requested compliance details in the referenced material. Compliance and qualification must be confirmed for the exact ordering code before use in regulated or automotive designs.