MAX114CNG+ - 8-Bit, 4-Channel, 1MSPS ADC | Maxim Integrated
MPN: MAX114CNG+ ✓ AktifMAX114CNG+ Ringkasan
An ADC is an analog-to-digital converter, a data-acquisition IC that transforms continuously varying voltage signals into binary values for processing by a microcontroller, computer, or control system. The MAX114 belongs to the data-converter hierarchy, where a multiplexed ADC shares one conversion core among several input channels. Its 1 MSPS conversion rate supports signal monitoring, process measurement, industrial control, instrumentation, and embedded data acquisition.
Key features include 8-bit resolution, four single-ended input channels, a 1 MSPS sampling rate, parallel output configuration, flash ADC architecture, a 1:1 multiplexer-to-sample-and-hold ratio, and a +5 V analog supply. Power-down reduces the shutdown current to 1 µA, making the device useful in portable or intermittently operated systems where standby consumption matters. The commercial temperature grade supports general-purpose equipment rather than harsh automotive environments.
Internally, the four analog inputs are routed by a multiplexer to a sampling circuit and flash conversion core. Because only one conversion core is used, the input multiplexing structure favors compact cost-sensitive designs over simultaneous-sampling systems. The 8-bit resolution provides 256 digital codes per conversion, so input scaling, grounding, and reference stability directly influence measurement resolution and repeatability.
Typical uses include panel-meter and sensor-interface systems, industrial process monitoring, laboratory measurement equipment, battery-powered instruments, and four-channel control systems. The 24-pin DIP package supports prototyping and through-hole assembly but occupies more board area than modern surface-mount packages. Board layouts should route analog inputs away from digital switching nodes and provide a low-impedance return path to the converter ground.
When designing around the MAX114CNG+, verify the complete pinout and analog input range in the manufacturer datasheet before layout because the supplied distributor data does not include the full pin mapping. Input conditioning, bypass capacitors, and external reference design remain essential for obtaining useful accuracy from the 8-bit conversion system. Commercial operation should also be checked against the system’s ambient-temperature envelope.
This page consolidates verified distributor specifications, lifecycle information, package details, drop-in candidate data, and practical selection guidance. The comparison tables and design notes add engineering context beyond a distributor catalog entry while clearly separating verified facts from parameters that still require datasheet confirmation.
Alternatif penggantian untuk MAX114CNG+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
MAX114ENG+
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX114ENG-T
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX114CNG-T
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MAX114ANG+
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MAX114ACP+
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MAX114CNG+ Rating Maksimal & Karakteristik Listrik
| Converter Type | 8-bit flash ADC |
| Resolusi | 8 bit |
| Laju Pengambilan Sampel | 1 MSPS |
| Number of Inputs | 4 |
| Input Type | Single-ended |
| Data Interface | Parallel |
| ADC Architecture | Flash |
| Multiplexer to Sample-and-Hold Ratio | 1:1 |
| Number of Analog-to-Digital Converters | 1 |
| Tegangan Pemuat | +5 V |
| Power-Down Current | 1 µA |
| Paket | 24-pin DIP |
| Terminal Count | 24 |
| Tipe Mounting | Through-hole |
| Temperature Grade | Commercial |
| Part Status | Active |
| Moisture Sensitivity Level | MSL 1 |
| Peak Reflow Temperature | 260 °C |
| Maximum Time at Peak Reflow Temperature | 30 s |
| Terminal Finish | Matte tin |
| JESD-609 Code | e3 |
| Status RoHS | Compliant |
| External Reference | Required |
MAX114CNG+ 24-pin dip Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX114CNG+ (24-pin dip pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MAX114CNG+.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX114CNG+ cocok untuk 6 aplikasis: Industrial Process Monitoring, Battery-Powered Data Acquisition, Laboratory Panel Meters, Embedded Sensor Interface, Control-System Signal Capture, Educational and Prototype Systems.
Industrial Process Monitoring
The MAX114CNG+ fits four-channel industrial monitoring because it combines four single-ended inputs with a 1 MSPS conversion rate in one 24-pin DIP device. A controller can select each sensor through the multiplexer and read the resulting 8-bit code over the parallel interface. The 1 µA power-down current is useful between measurement bursts, although active current and acquisition timing must be checked in the manufacturer datasheet. For noisy factory environments, short sensor traces, solid grounding, filtering close to the converter, and isolation from motors and switching supplies are essential.
Direkomendasikan
Battery-Powered Data Acquisition
The MAX114CNG+ is suitable for portable data-acquisition modules that periodically sample several sensors. Its 1 µA power-down current reduces standby demand, while the four-channel multiplexer permits one ADC core to serve multiple analog inputs. The converter operates from a +5 V supply and provides 8-bit results through a parallel interface, making it practical for systems with an embedded controller and a dedicated 5 V rail. Energy calculations should combine the verified standby current with the still-unspecified active current, and the power-down timing should be checked before relying on rapid duty-cycled acquisition.
Direkomendasikan
Laboratory Panel Meters
The MAX114CNG+ can support multichannel laboratory panel meters that display temperature, level, position, or other slow-moving analog measurements. Its 1 MSPS flash conversion rate provides more than enough conversion bandwidth for many panel-meter signals, while four multiplexed inputs reduce the number of converters needed. The 8-bit resolution gives 256 digital codes per conversion, making careful input scaling and reference stability important for readable results. A DIP package is convenient for prototypes and educational instruments, although a compact surface-mount implementation would be preferable in a final handheld enclosure.
Direkomendasikan
Embedded Sensor Interface
The MAX114CNG+ works well as an embedded front end for four resistive, voltage-output, or conditioned sensor channels. Its single-ended inputs accept selected analog signals, and the 1 MSPS rate supports rapid sequential conversion when the source impedance and acquisition time permit. Because the device uses one flash conversion core, the multiplexer must settle between channel changes; obtain the recommended driver, acquisition-time, and source-impedance limits from the manufacturer datasheet. The parallel bus is straightforward to connect to a microcontroller but requires defined logic levels, grounding, and adequate settling time.
Direkomendasikan
Control-System Signal Capture
The MAX114CNG+ is applicable to feedback monitoring and supervisory control systems that must observe four analog command or condition signals. A 1 MSPS conversion capability permits the controller to refresh the selected channel rapidly, while the 8-bit result provides enough resolution for coarse diagnostics and basic closed-loop supervision. The DIP package allows straightforward replacement on legacy through-hole control boards, but production designers should verify lifecycle availability and consider a surface-mount ADC for new compact designs. Analog traces should terminate near the converter with suitable bypassing, and digital return currents should not share the sensitive analog ground path.
Direkomendasikan
Educational and Prototype Systems
The MAX114CNG+ is especially accessible for education and prototype development because it combines four inputs, a 1 MSPS conversion rate, and an 8-bit parallel output in an inspectable 24-pin DIP package. Students can connect potentiometers, dividers, or sensor outputs and observe the converted code directly with a microcontroller or logic interface. The +5 V supply and low 1 µA power-down current simplify demonstrations of sampling concepts, multiplexing, and standby control. Because the supplied snippets do not include the full pin assignment or input range, designers must consult the manufacturer datasheet before wiring the board.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX114CNG+ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX114ENG+ | MAX114ENG-T | MAX114CNG-T | MAX114ANG+ | MAX114ACP+ |
|---|---|---|---|---|---|---|
| Package | 24-pin DIP | 24-pin DIP | 24-pin DIP | 24-pin DIP | 24-pin DIP | 24-pin DIP |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Resolution | 8 bit | 8 bit | 8 bit | 8 bit | 8 bit | 8 bit |
| Sampling Rate | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS | 1 MSPS |
| Input Channels | 4 single-ended inputs | 4 single-ended inputs | 4 single-ended inputs | 4 single-ended inputs | 4 single-ended inputs | 4 single-ended inputs |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Data Interface | Parallel | Parallel | Parallel | Parallel | Parallel | Parallel |
| Architecture | Flash | Flash | Flash | Flash | Flash | Flash |
| Power-Down Current | 1 µA | 1 µA | 1 µA | 1 µA | 1 µA | 1 µA |
Diferensiator Kunci
- Four-channel multiplexing in one 24-pin converter (vsMAX114ENG+)
- Verified low 1 µA shutdown current (vsMAX114ENG-T)
- Commercial-grade ordering code for general-purpose designs (vsMAX114ANG+)
- Parallel 8-bit output supports direct digital acquisition (vsMAX114ACP+)
Catatan Desain
Place the MAX114CNG+ close to the four analog sources and provide separate, low-impedance analog and digital return paths. Keep sensor traces short, use a continuous ground plane, and place input filtering or protection components near the converter pins. The parallel data bus should be routed away from high-current switching nodes, with a defined return path to prevent switching current from entering the reference and analog ground reference point.
Because the four channels are multiplexed into one sample-and-hold circuit, allow the acquisition and multiplexer-settling time specified in the manufacturer datasheet before interpreting a conversion result. Use the recommended source impedance and acquisition sequence, and avoid changing channels immediately before a timing-critical conversion. This is especially important when 1 MSPS is used with high-impedance sensors or long analog traces.
Decouple the +5 V analog supply close to the device and follow the manufacturer’s recommended input, reference, and bypass-capacitor circuit. Verify the reference voltage, input range, supply sequencing, and power-down behavior against the datasheet. The verified 1 µA power-down current applies to shutdown mode and should not be interpreted as the active operating current; the latter remains marked as needed in the specification table.
Do not infer the complete pinout from the 24-pin package count or assume that similarly named MAX114 order codes are interchangeable. Compare the complete connection table, reference configuration, acquisition timing, logic levels, and temperature ratings for MAX114ENG+, MAX114ENG-T, MAX114CNG-T, MAX114ANG+, or MAX114ACP+ before replacing the MAX114CNG+. For new high-volume designs, also evaluate whether the legacy through-hole DIP is appropriate.
Informasi Konformitas
RoHS status is reported as true in the supplied comparison data. The matte-tin finish and JESD-609 e3 classification support lead-free assembly, but the verified excerpts do not explicitly state REACH, halogen-free, or conflict-minerals status. The part is commercial grade rather than identified as AEC-Q100 qualified.
