MAX153EWP+ - 8-Bit 1Msps ADC with Power-Down | Maxim
MPN: MAX153EWP+ ✓ AktifMAX153EWP+ Ringkasan
A flash ADC is a sampling data-conversion device that uses parallel internal comparators to convert an analog voltage into a digital code. The MAX153 belongs to the ADC hierarchy within data-converter and signal-processing semiconductors. Its microprocessor-compatible interface supports systems in which a processor reads eight digital output bits and controls acquisition through mode and read/write signals.
The principal specifications are an 8-bit resolution and a 1 Msps sampling rate. These characteristics make the converter suitable for high-speed control loops, industrial monitoring, data acquisition, and embedded signal measurement. The half-flash architecture provides the 660 ns conversion time cited in the manufacturer datasheet, while the POWERDN control reduces supply consumption to 1 µA when conversion activity is not required.
The MAX153 accepts either unipolar or bipolar input ranges and supports single +5 V or dual ±5 V operation. This supply flexibility lets the same converter support multiple analog-system architectures. The device also includes a 4-bit internal flash DAC associated with the reference and conversion circuitry, supporting reference and offset-oriented system arrangements described by the manufacturer.
Typical uses include industrial process monitoring, digital voltmeter and panel-meter front ends, microprocessor-controlled instrumentation, and compact embedded measurement systems. Designers can use the 1 Msps throughput for fast-changing signals, while the 8-bit resolution suits quantization and supervisory control tasks where fine analog accuracy is not the primary requirement.
Circuit design should account for input settling, reference stability, supply bypassing, and the required read/write timing. Because this is a high-speed flash converter, source impedance and PCB trace length can affect the time available for the internal sampling network to acquire the input. Use the pin-description and timing diagrams in the manufacturer datasheet when assigning control signals and laying out the analog input path.
This product page organizes the MAX153EWP+ electrical characteristics, package information, application guidance, and confirmed drop-in alternatives. It also highlights the distinctions that matter during PCB reuse, including operating-temperature grade and package type, so engineers can verify mechanical and electrical compatibility before approving a replacement.
Alternatif penggantian untuk MAX153EWP+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
MAX153CWP+
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX153EWP+ Rating Maksimal & Karakteristik Listrik
| Converter Type | 8-bit flash ADC |
| Resolusi | 8 bit |
| Laju Pengambilan Sampel | 1 Msps |
| Conversion Time | 660 ns |
| Input Channel Count | 1 channel |
| Input Polarity | Unipolar or bipolar |
| Tipe Antarmuka | Microprocessor-compatible parallel interface |
| Output Data Width | 8 bit |
| Supply Configuration | Single +5 V or dual ±5 V |
| Power-Down Current | 1 µA |
| Internal DAC Resolution | 4 bit |
| Package Type | 20-pin SOIC |
| Package Width | 7.50 mm |
| Package Height | 0.295 inch |
| Gaya Mounting | Surface-mount |
| Terminal Count | 20 terminals |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Minimum Operating Temperature | -40 °C |
MAX153EWP+ 0.295 inch Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX153EWP+ (0.295 inch pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MAX153EWP+.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX153EWP+ cocok untuk 6 aplikasis: Industrial Process Monitoring, Digital Voltmeter Front End, Embedded Control Signal Acquisition, Fast Data Acquisition Module, Power-Down Measurement System, Instrumentation and Control Panel.
Industrial Process Monitoring
The MAX153EWP+ suits process-monitoring systems that sample changing sensor voltages and transfer readings to a microprocessor or controller. Its 8-bit resolution provides 256 digital codes, while the 1 Msps conversion rate and 660 ns conversion time allow measurements to be captured more frequently than many slow-resolution sensor interfaces. The industrial-grade temperature range extends down to -40 °C, making the device suitable for equipment installed in cooler industrial environments. Place the converter close to the front end, use a low-noise reference, and keep the analog input path short. Its parallel interface suits controllers that can read the eight data outputs directly and control each conversion through the mode and read/write signals.
Direkomendasikan
Digital Voltmeter Front End
A MAX153EWP+ can form the conversion stage of a digital voltmeter or panel-meter measurement chain. The 8-bit output is appropriate for basic voltage indication, threshold monitoring, and supervisory instrumentation where 256 levels provide adequate resolution. The 1 Msps capability permits rapid sampling of the input node, while the 660 ns conversion time supports short acquisition cycles. The converter accepts unipolar or bipolar inputs, allowing it to be used with appropriately conditioned positive measurements or centered bipolar signals. Accurate metrology requires attention to reference stability, input settling, calibration, and PCB leakage; the ADC’s nominal resolution does not remove errors contributed by the analog front end.
Direkomendasikan
Embedded Control Signal Acquisition
The MAX153EWP+ is appropriate for embedded controllers that must acquire analog control signals through a direct parallel interface. At 1 Msps, it can sample faster-changing feedback or supervisory signals than a slow serial ADC, and its 660 ns conversion time helps shorten the measurement interval. Eight output bits can be read by an MCU or microprocessor without a serial protocol, while the mode and read/write controls organize acquisition. Keep the converter’s analog input path short, bypass its supply pins locally, and synchronize control traces with the manufacturer timing diagrams. The 8-bit result is best suited to feedback trim, diagnostics, and supervisory functions rather than precision closed-loop control requiring substantially higher resolution.
Direkomendasikan
Fast Data Acquisition Module
The MAX153EWP+ can serve as the conversion element in a compact high-speed data-acquisition module because it combines a 1 Msps sampling rate with an 8-bit parallel output. A field-programmable controller or microprocessor can issue a read, latch the resulting byte, and store or process it. This architecture avoids the serial overhead associated with slower ADC interfaces and is useful when monitoring several derived signals through multiplexing. The module designer must budget acquisition time for input settling, control latency, and memory transfer. The MAX153EWP+ also accepts bipolar inputs, but referenced and scaled signals must remain within the electrical range and timing conditions described in the manufacturer datasheet.
Direkomendasikan
Power-Down Measurement System
The MAX153EWP+ is useful in intermittently operated measurement systems because its POWERDN control reduces supply current to 1 µA in the specified shutdown state. A battery-powered controller can activate the converter when a measurement is required and return it to power-down between updates. The 1 Msps throughput permits rapid acquisition bursts, while the low shutdown current is valuable when standby demand dominates the operating budget. The system should provide stable bypass capacitors, control the analog input during inactive periods, and wake the device according to the manufacturer timing sequence. Account for the time required for the analog front end and reference to settle before treating the first converted sample as valid.
Direkomendasikan
Instrumentation and Control Panel
The MAX153EWP+ supports instrumentation panels that combine fast analog sampling with an embedded processor. Its 8-bit output is adequate for bar-graph displays, setpoint indication, alarm thresholds, and compact diagnostic screens. The 1 Msps rate allows the controller to refresh or sample measurements rapidly, while the parallel interface simplifies connection to a microprocessor bus. The industrial temperature grade supports equipment intended for factories and other temperature-variable installations. For reliable panel performance, isolate noisy switching nodes from the analog input and reference paths, use compact bypass capacitors, and follow the manufacturer pinout when assigning the data, mode, and read/write signals.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX153EWP+ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX153CWP+ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 20-pin SOIC | 20-pin SOIC - same |
| Resolution | 8 bit | 8 bit |
| Sampling Rate | 1 Msps | 1 Msps |
| Conversion Time | 660 ns | 660 ns |
| Input Channel Count | 1 channel | 1 channel |
| Input Polarity | Unipolar or bipolar | Unipolar or bipolar |
| Supply Options | Single +5 V or dual ±5 V | Single +5 V or dual ±5 V |
| Power-Down Current | 1 µA | 1 µA |
| Minimum Operating Temperature | -40 °C | 0 °C |
| Interface | Microprocessor-compatible parallel interface | Microprocessor-compatible parallel interface |
Diferensiator Kunci
- Broader industrial temperature coverage (vsMAX153CWP+)
- Direct 1 Msps acquisition in a small SOIC footprint (vsMAX153CWP+)
- Low-power pause between measurement bursts (vsMAX153CWP+)
Catatan Desain
Route the analog input directly to the MAX153EWP+ and keep the input network close to the converter. Because the half-flash architecture has a specified 660 ns conversion time, input settling must occur within the acquisition interval defined by the manufacturer timing diagrams. Place the input and bypass capacitors near their associated pins, use a compact ground return, and keep switching-regulator and digital-clock traces away from the reference and analog-input nodes.
Do not treat a matching 20-pin SOIC footprint as sufficient proof of interchangeability. MAX153CWP+ is mechanically compatible with MAX153EWP+, but its minimum operating temperature is 0 °C rather than -40 °C. Verify the complete temperature range, supply configuration, input range, control timing, and acquisition behavior against the manufacturer datasheet before approving the alternate part for an industrial design.
Provide local supply bypassing at the MAX153EWP+ and decouple any upstream converter or regulator according to the manufacturer’s typical application circuit. The 1 µA figure applies to the specified power-down condition and does not characterize active conversion current. Verify startup behavior after POWERDN release, allow the reference and external network to settle, and avoid using the first post-wakeup sample unless the system timing guarantees adequate settling.
The eight digital outputs represent a fast parallel interface, so route them consistently to the controller and observe the manufacturer’s read, write, and mode timing. Account for trace delay, bus capacitance, and processor setup time when calculating the acquisition loop. Avoid adding long stubs or test-point branches to sensitive nodes, and keep the digital return path close to the corresponding signals to limit switching current in the analog ground reference.
Informasi Konformitas
The available product-page and datasheet information does not provide a complete compliance declaration for the exact MAX153EWP+ ordering code. Industrial temperature grade does not establish AEC-Q100 qualification.