MAX3243CDBG4 - 250kbps 3/5 RS-232 Transceiver | TI
MPN: MAX3243CDBG4 ✓ AktifMAX3243CDBG4 Ringkasan
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX3243 belongs to the RS-232 transceiver class, within interface ICs and broader semiconductor communication-interface devices. It supports asymmetric designs requiring three transmit channels and five receive channels, making it useful for multiport serial controllers, data acquisition equipment, and service interfaces.
The three RS-232 drivers and five receivers operate from a single 3 V to 5.5 V supply. Its maximum signaling rate of 250 kbps supports conventional serial communication while providing useful margin for a broad range of industrial and embedded links. The ±15 kV human-body-model ESD rating is a significant handling advantage when an exposed connector places the interface close to cables, external equipment, or less controlled user-accessible ports.
The MAX3243CDBG4 ordering code identifies the commercial-temperature, 28-pin SSOP configuration. The SSOP package offers a substantially smaller board footprint than a conventional 28-pin plastic DIP while remaining compatible with automated surface-mount assembly. Tube packaging is specified for this ordering option, allowing distributors and contract manufacturers to handle the components in standard production workflows.
Typical applications include multichannel RS-232 test equipment, industrial controller service ports, serial adapters, instrumentation, embedded systems, and legacy peripheral interfaces. The three transmitters can drive three separate RS-232 outputs, while five receivers allow one controller to monitor five incoming signals without requiring five separate interface devices. This asymmetry can simplify system partitioning when a design has fewer outbound data paths than inbound control or status paths.
Layout should keep the transceiver close to its connector and separate the protected communication interface from sensitive digital circuitry. Follow the pin-description table and recommended decoupling arrangement in the manufacturer datasheet. Check signal polarity and connector assignment for every RS-232 channel, and verify that the selected cable uses the correct DB9 or alternative connector convention rather than assuming a universal pinout.
This product page combines manufacturer specifications, package information, validated drop-in alternatives, and application-focused design guidance. It is intended to accelerate component identification and board-level engineering while preserving the distinctions that matter when replacing a serial-interface IC.
Alternatif penggantian untuk MAX3243CDBG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX3243CDBG4 (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature Range, Package, Product Type.
MAX3243CPWR
✅ Drop-InKontak untuk harga
Lihat Datasheet →MAX3243EUP+T
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
SN65C3243PWR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
SP3243EUCA-L/TR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX3243CDBG4 Spesifikasi
| Product Type | RS-232 line driver and receiver transceiver |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Interface Standard | RS-232 |
| ESD Protection | ±15 kV HBM |
| Paket | 28-pin SSOP |
| Package Width | 5.30 mm |
| Package Width (Alternate Expression) | 0.209 inch |
| Rentang Suhu Kerja | 0 °C to 70 °C |
| Tipe Mounting | Surface mount |
| Packaging | Tube |
MAX3243CDBG4 0.209 inch Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX3243CDBG4 (0.209 inch pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MAX3243CDBG4.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX3243CDBG4 cocok untuk 6 aplikasis: Industrial Controller Service Ports, RS-232 Test and Measurement Equipment, Embedded Serial Adapters, Data Acquisition Systems, Legacy Peripheral Interfaces, Multiport Communication Equipment.
Industrial Controller Service Ports
The MAX3243CDBG4 fits industrial controller service and configuration ports that must exchange RS-232 data with maintenance equipment. Its three drivers support outbound command or status paths, while five receivers can monitor multiple incoming control signals. Operating from 3 V to 5.5 V supports both 3.3 V and 5 V embedded platforms, and the 250 kbps data rate is suitable for ordinary diagnostic protocols. The ±15 kV HBM ESD rating adds protection on accessible lines, although correct grounding and connector design remain essential.
Direkomendasikan
RS-232 Test and Measurement Equipment
The MAX3243CDBG4 is useful in test and measurement instruments that interface with legacy RS-232 equipment. A 250 kbps maximum rate covers many serial-control and data-transfer links, while three transmitters and five receivers support asymmetric instrument control arrangements. The 28-pin SSOP preserves board area in compact instruments, and operation from 3 V to 5.5 V allows integration with mixed-voltage control electronics. The interface should be positioned near the external connector, with adequate return-path grounding to reduce noise and data errors.
Direkomendasikan
Embedded Serial Adapters
The MAX3243CDBG4 can bridge an embedded controller or single-board computer to a conventional RS-232 port. The 3 V to 5.5 V operating range allows direct use with common embedded supply rails, and the asymmetric 3/5 arrangement can serve designs with several received status signals but only a few transmitted commands. Its 250 kbps capability is well suited to configuration, firmware-update, and diagnostic protocols. The compact SSOP footprint helps maintain small adapter dimensions while the ESD rating improves robustness at the connector boundary.
Direkomendasikan
Data Acquisition Systems
The MAX3243CDBG4 supports data-acquisition systems that accept commands or synchronize with external RS-232 instruments. Five receivers allow several independently arriving control or status signals to be monitored, while three drivers handle outbound configuration messages. The 250 kbps signaling rate is adequate for many low-to-moderate-rate acquisition-control links. Its 28-pin SSOP package supports compact multi-channel instrumentation, and the ±15 kV HBM protection rating helps manage electrostatic exposure at externally connected ports when the layout also follows the manufacturer’s guidance.
Direkomendasikan
Legacy Peripheral Interfaces
The MAX3243CDBG4 is appropriate for adding or maintaining legacy peripheral interfaces in embedded systems that still rely on RS-232. Three transmitters can serve outbound status, command, and handshake channels, and five receivers can accept inbound control signals from a peripheral. The 3 V to 5.5 V supply range simplifies integration with modern controller rails while preserving compatibility with 5 V-era equipment. Engineers should verify signal polarity, handshake timing, cable pinout, and ground reference because those system-level details determine whether the interface functions reliably.
Direkomendasikan
Multiport Communication Equipment
The MAX3243CDBG4 fits multichannel communication equipment where one board must terminate several RS-232 inputs but transmit on fewer channels. Five receivers reduce the need for separate receiver ICs, and three drivers support outbound links such as commands, acknowledgments, and status. The 250 kbps rate fits many conventional serial-control protocols, while the 28-pin SSOP package limits board-space consumption. Place the device close to the connector, maintain a continuous ground path, and use the manufacturer pin table to avoid crossing TX and RX assignments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX3243CDBG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX3243CPWR | MAX3243EUP+T | SN65C3243PWR | SP3243EUCA-L/TR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Exar |
| Package | 28-pin SSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Driver Count | 3 | 3 | 3 | 3 | 3 |
| Receiver Count | 5 | 5 | 5 | 5 | 5 |
| Interface Standard | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| Special Features | Asymmetric 3/5 RS-232 transceiver | Asymmetric 3/5 RS-232 transceiver | Asymmetric 3/5 RS-232 transceiver | Asymmetric 3/5 RS-232 transceiver | Asymmetric 3/5 RS-232 transceiver |
Diferensiator Kunci
- Maintains the same asymmetric channel architecture as the principal same-family alternative (vsMAX3243CPWR)
- Provides a documented 250 kbps operating rate in the same footprint (vsSP3243EUCA-L/TR)
- Adds the same ±15 kV HBM protection rating cited for the original MAX3243 family (vsSN65C3243PWR)
Catatan Desain
Place the MAX3243CDBG4 close to the external RS-232 connector and route each driver and receiver trace directly to its connector or protection component. Keep the serial interface away from clocks, switching-regulator nodes, and sensitive analog inputs. Maintain a continuous ground reference between the transceiver and connector shield, and follow the pin-description table in the manufacturer datasheet rather than inferring channel direction from the internal pin numbering.
RS-232 logic polarity, signal direction, and DB9 connector assignments are not standardized across every adapter. Before schematic capture, label every RIN, ROUT, TIN, and TOUT connection and compare it with the intended peripheral documentation. Also verify that the selected replacement suffix preserves the required temperature range and shutdown behavior. A matching 28-pin footprint removes PCB rework but does not eliminate configuration differences.
Use a solid ground plane and route return currents without long loops between the transceiver ground pins and the connector ground. Decouple the 3 V to 5.5 V supply close to the device, and keep the RS-232 traces away from switching-node copper. If a cable is long or the port is exposed to severe electrostatic discharge, add appropriately coordinated external protection and validate the complete cable and equipment grounding arrangement.
The MAX3243CDBG4 accepts a 3 V to 5.5 V supply, but the selected rail must meet the device’s input and output logic requirements in the complete system. Confirm receiver thresholds and driver compatibility with the connected RS-232 equipment, especially when operating from 3.3 V. Use the manufacturer’s recommended supply and ground connections, and verify the supply remains within range during startup, transients, and maximum channel activity.
Informasi Konformitas
The product is an RS-232 interface IC rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the available product information.