MC145554DW - 5V PCM Codec-Filter | Motorola | Voice IC
MPN: MC145554DW ✗ Akhir HidupMC145554DW Ringkasan
A PCM codec-filter is an interface IC that combines pulse-code-modulation voice digitization, reconstruction, band limiting, and smoothing. It belongs to the codec-filter family within the broader hierarchy of interface ICs, communications ICs, and semiconductors. In a telephone or voice-processing system, the circuit receives digital PCM information, performs the required filtering and encoding functions, and supports transmission or reproduction of voice-band signals.
The MC145554DW provides a 16-terminal package, a nominal 5 V supply, and an operating-temperature range from -40°C to +85°C. These characteristics suit equipment operating from conventional 5 V logic rails. The device is identified in product documentation as an interface transceiver for serial communication, bus conversion, signal driving, receiver stages, and industrial networking applications.
Its mu-law capability and 13-bit PCM interface make it most applicable to legacy digital voice and telecommunications equipment, including channel banks, voice-processing modules, terminal equipment, and PCM transmission systems. Synchronous and asynchronous operating support broadens its usefulness where the surrounding controller must accommodate different PCM clocking arrangements. An internal precision voltage reference helps establish stable operating conditions for the codec-filter functions.
Because MC145554DW belongs to an older communications-controller family, engineers should verify signal timing, pin-level connectivity, clocking mode, and external filtering requirements against the Motorola datasheet before replacing a part in an operating design. The SOIC-16 footprint is easy to inspect during PCB review, but compatibility depends on matching the complete pin function and PCM timing characteristics rather than package dimensions alone.
For new PCM voice designs, compare the device with newer interface solutions on power consumption, supported law and bit width, clock flexibility, and system architecture. For maintenance of existing 5 V mu-law equipment, MC145554DW can be useful when its documented electrical and timing characteristics match the original circuit. This page consolidates the device identity, package, environmental limits, and engineering guidance needed to plan sourcing and PCB review.
Alternatif penggantian untuk MC145554DW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifMC145554DW Rating Maksimal & Karakteristik Listrik
| Product Type | Single-function PCM codec-filter IC |
| PCM Data Width | 13 bits |
| Voice Encoding | MU-law |
| Tegangan Pemuat | 5 V |
| Operating Modes | Synchronous or asynchronous operation |
| On-Chip Reference | Precision voltage reference |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| Package Type | 16-pin plastic small-outline package (PDSO-16/SOP-16) |
| Terminal Count | 16 terminals |
| Tipe Mounting | Surface mount |
| Technology | CMOS |
| Signal Functions | Serial communication, bus conversion, signal driving, and receiver stages |
| Filter Functions | Voice digitization, reconstruction, band limiting, and smoothing |
MC145554DW 16-pin plastic small-outline package (pdso-16/sop-16) Diamant Konfigurasi Panduan
Konfigurasi pin untuk MC145554DW (16-pin plastic small-outline package (pdso-16/sop-16) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MC145554DW.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MC145554DW cocok untuk 6 aplikasis: Digital Voice Channel Equipment, PCM Telephony Terminals, Voice-Processing Interface Modules, Legacy Industrial Networking Gateways, PCM Channel Interface Cards, Obsolete Equipment Maintenance.
Digital Voice Channel Equipment
The MC145554DW fits legacy digital voice equipment that uses 5 V circuitry, 13-bit PCM data, and mu-law coding. Its codec-filter function combines digitization and reconstruction with band limiting and smoothing, reducing the need for separate voice-processing stages in an established design. The device supports synchronous and asynchronous arrangements, giving an equipment designer more flexibility when matching an existing PCM clocking architecture. Use the manufacturer timing diagrams to configure the serial interface correctly and to verify that the selected clock mode agrees with the system controller. The -40°C to +85°C range supports industrial and telecommunications environments, although a maintained legacy platform must be checked for supply continuity and documented change control.
Direkomendasikan
PCM Telephony Terminals
MC145554DW is appropriate for PCM telephony terminals designed around mu-law voice channels and conventional 5 V logic. Its 13-bit PCM interface and integrated codec-filter functions provide the core signal path for digitizing and reconstructing voice-band signals. When designing or repairing a terminal, connect and validate the clock, data, and control pins against the manufacturer pin table rather than assuming a generic PCM interface arrangement. The ability to work synchronously or asynchronously is valuable when the terminal inherits different channel timing from its line interface or microprocessor. The device's -40°C to +85°C range covers many deployed industrial and communication environments, but EMI layout and power-quality requirements remain essential for reliable audio recovery.
Direkomendasikan
Voice-Processing Interface Modules
The MC145554DW can serve as the voice-processing interface in modular equipment that receives and transmits 13-bit PCM streams. Integrating the codec-filter function with on-chip precision voltage reference support simplifies the block architecture compared with a design assembled from separate conversion and filtering stages. The 5 V supply is convenient for systems already operating on conventional logic rails. Engineers should confirm the analog filtering requirements around the device, external component recommendations, and acceptable clock jitter before releasing a board. The operating range of -40°C to +85°C supports industrial modules, but environmental testing must include worst-case supply, temperature, and channel-loading conditions because legacy codec timing can influence end-to-end voice quality.
Direkomendasikan
Legacy Industrial Networking Gateways
MC145554DW can be used in legacy industrial networking gateways that must bridge voice or signaling channels over a PCM backbone. Motorola identifies the device with serial communication, bus conversion, signal driving, receiver stages, and industrial networking applications. Its 5 V operating supply and mu-law capability align with older telecommunications transport hardware, while synchronous or asynchronous operation allows integration with different channel-clock arrangements. The primary engineering task is preserving the original interface timing: compare the pin descriptions, clock-edge requirements, data format, and control states in the manufacturer datasheet. Maintain generous grounding and place the analog and digital return paths according to the recommended application layout to prevent codec noise from affecting adjacent network channels.
Direkomendasikan
PCM Channel Interface Cards
MC145554DW is suited to PCM channel cards that require one mu-law codec-filter channel per voice path. The 13-bit PCM interface and integrated voice digitization, reconstruction, band limiting, and smoothing functions make the device useful in channelized telecommunications equipment. Its 16-terminal surface-mount package supports compact card layouts, although pin and trace assignments must follow the exact manufacturer drawing. The -40°C to +85°C specification is appropriate for many outdoor or industrial systems when the card receives a clean 5 V rail. During hardware bring-up, check idle code behavior, clock synchronization, framing, and analog signal levels to distinguish codec configuration errors from downstream channel faults.
Direkomendasikan
Obsolete Equipment Maintenance
MC145554DW is useful for maintenance of obsolete telecommunications and industrial-control equipment that originally used a 5 V, 13-bit PCM, mu-law codec-filter. Maintaining the original device type avoids introducing signal-timing changes into a proven voice path. Before ordering a replacement, compare the actual device marking, package orientation, terminal names, and clocking configuration with the circuit documentation. Because the part is no longer a current catalog product, request lot traceability and packaging details through the quote form on this page. If the original schematic is incomplete, reconstruct the interface from the manufacturer application circuit and validate it on a hardware prototype before deploying the component across a larger installed base.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC145554DW — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Brand | Motorola |
| Package | 16-pin PDSO-16/SOP-16 |
| Product Type | Single-function PCM codec-filter |
| PCM Data Width | 13 bits |
| Voice Encoding | MU-law |
| Supply Voltage | 5 V |
| Operating Modes | Synchronous or asynchronous |
| Operating Temperature Range | -40°C to +85°C |
| Terminal Count | 16 terminals |
| On-Chip Reference | Precision voltage reference |
Diferensiator Kunci
- Legacy 5 V mu-law PCM interface (vsMC145557)
- Broad industrial temperature range (vsMC145564)
- Flexible PCM clocking support (vsMC145567)
Catatan Desain
Route PCM clock, data, and control signals away from analog codec inputs and return paths. Follow the manufacturer recommended application layout for supply decoupling, analog grounding, and digital grounding, and keep the ground reference continuous under the 16-pin package. Poor separation between the timing signals and codec-filter inputs can increase recovered-audio noise or cause intermittent framing errors.
Provide a stable 5 V rail with local high-frequency bypass and adequate bulk-energy capacity near the device. Check the datasheet's permitted supply range and sequencing requirements before finalizing the power circuit. Because this is a legacy part used in maintained equipment, verify rail startup behavior at power restoration rather than assuming the device and surrounding controller initialize in the same order.
Do not substitute a family member based only on the PCM codec-filter label. Confirm the 16 terminal assignments, clock mode, PCM bit format, mu-law behavior, control levels, and analog connections. MC145557, MC145564, and MC145567 are related family parts, but the available comparison information does not establish that any of them is a pin-for-pin replacement for MC145554DW.
Informasi Konformitas
Compliance attributes are not stated in the available product information. The device is a legacy 5 V CMOS PCM codec-filter and does not have a stated AEC-Q100 qualification.