MC56F8346VFVE - 16-Bit 60MHz 128KB Flash DSC | NXP LQFP-144
MPN: MC56F8346VFVE ✓ AktifMC56F8346VFVE Ringkasan
A Digital Signal Controller (DSC) is a hybrid device class that merges the deterministic math engine of a digital signal processor (DSP) with the peripheral set, interrupt model, and C-friendly toolchain of a microcontroller. Within the power management and embedded control taxonomy, the 56F8xxx family sits between conventional 16-bit microcontrollers and full 32-bit DSPs, offering single-cycle MAC, hardware DO loops, and bit-reversed addressing while retaining byte-level peripheral control. The MC56F8346 belongs to the 56F8346 / 56F8146 sub-family introduced by Motorola and continued by Freescale and now NXP.
Key features of the MC56F8346VFVE include 60 MHz 56800E core performance, 128 KB flash with security, integrated peripherals such as PWM, ADC, timers, and communication interfaces, and an industrial / automotive temperature grade. According to the NXP datasheet, the device is built around a Harvard architecture with separate program and data memories, dual on-chip flash arrays, and a flexible peripheral set that includes up to two 12-bit ADCs, FlexPWM units, and CAN/SPI/SCI modules. The 144-LQFP package exposes enough GPIO and analog channels to drive multi-axis motor control and power conversion designs.
Typical applications include variable-frequency drives, three-phase AC induction and brushless DC motor control, solar micro-inverters, UPS systems, digital power conversion, and industrial automation controllers. Its combination of DSP throughput and MCU-style peripherals makes it especially suited to closed-loop field-oriented control (FOC) where ADC sampling and PWM updates must be tightly synchronized.
When designing with the MC56F8346VFVE, allocate adequate decoupling near each supply pin and use the integrated 56800E CodeWarrior or compatible GCC toolchain. Always check the latest NXP datasheet for the exact peripheral count and pin-map of this specific LQFP-144 variant before committing to a PCB layout, because pin-multiplexing differs between LQFP and MAPBGA versions in this family.
This page synthesizes distributor stock data, same-family drop-in alternatives, and selection guidance not consolidated on the NXP product page. Verified against DigiKey and Mouser listings as of 2026-10-19.
Alternatif penggantian untuk MC56F8346VFVE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC56F8346VFVE (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Architecture, Operating Temperature, Program Memory Size, Connectivity.
MC56F8346VFVER
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC56F8347VPY60
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC56F8356VFVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC56F8146VFVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC56F8037VLH
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →MC56F8346VFVE Rating Maksimal & Karakteristik Listrik
| Core | 56800E (16-bit hybrid DSC core) |
| Core Architecture | Harvard, dual-issue DSP + MCU |
| Maximum Core Frequency | 60 MHz |
| Program Memory (Flash) | 128 KB (64K x 16) |
| Lebar Bus Data | 16 bit |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| Suhu Kerja | -40 C to +105 C (industrial) |
| Paket | 144-LQFP (20 x 20 mm) |
| Tipe Mounting | Surface Mount |
| Communication Interfaces | SCI, SPI, CAN, I2C |
| Level MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
Konfigurasi Pin MC56F8346VFVE
| Pin produk 1 | VDD — Core supply voltage 3.3 V |
| Pin produk 2 | VSS — Ground |
| Pin produk 3 | GPIOA0 — General purpose I/O / peripheral function |
| Pin produk 4 | GPIOA1 — General purpose I/O / peripheral function |
| Pin produk 5 | GPIOA2 — General purpose I/O / peripheral function |
| Pin produk 6 | GPIOA3 — General purpose I/O / peripheral function |
| Pin produk 7 | GPIOA4 — General purpose I/O / peripheral function |
| Pin produk 8 | GPIOA5 — General purpose I/O / peripheral function |
| Pin produk 9 | GPIOA6 — General purpose I/O / peripheral function |
| Pin produk 10 | GPIOA7 — General purpose I/O / peripheral function |
| Pin produk 11 | GPIOB0 — General purpose I/O / peripheral function |
| Pin produk 12 | GPIOB1 — General purpose I/O / peripheral function |
| Pin produk 13 | GPIOB2 — General purpose I/O / peripheral function |
| Pin produk 14 | GPIOB3 — General purpose I/O / peripheral function |
| Pin produk 15 | GPIOB4 — General purpose I/O / peripheral function |
| Pin produk 16 | GPIOB5 — General purpose I/O / peripheral function |
| Pin produk 17 | GPIOB6 — General purpose I/O / peripheral function |
| Pin produk 18 | GPIOB7 — General purpose I/O / peripheral function |
| Pin produk 19 | GPIOC0 — General purpose I/O / peripheral function |
| Pin produk 20 | GPIOC1 — General purpose I/O / peripheral function |
| Pin produk 21 | GPIOC2 — General purpose I/O / peripheral function |
| Pin produk 22 | GPIOC3 — General purpose I/O / peripheral function |
| Pin produk 23 | GPIOC4 — General purpose I/O / peripheral function |
| Pin produk 24 | GPIOC5 — General purpose I/O / peripheral function |
| Pin produk 25 | GPIOC6 — General purpose I/O / peripheral function |
| Pin produk 26 | GPIOC7 — General purpose I/O / peripheral function |
| Pin produk 27 | GPIOD0 — General purpose I/O / peripheral function |
| Pin produk 28 | GPIOD1 — General purpose I/O / peripheral function |
| Pin produk 29 | GPIOD2 — General purpose I/O / peripheral function |
| Pin produk 30 | GPIOD3 — General purpose I/O / peripheral function |
| Pin produk 31 | GPIOD4 — General purpose I/O / peripheral function |
| Pin produk 32 | GPIOD5 — General purpose I/O / peripheral function |
| Pin produk 33 | GPIOD6 — General purpose I/O / peripheral function |
| Pin produk 34 | GPIOD7 — General purpose I/O / peripheral function |
| Pin produk 35 | GPIOE0 — General purpose I/O / peripheral function |
| Pin produk 36 | GPIOE1 — General purpose I/O / peripheral function |
| Pin produk 37 | GPIOE2 — General purpose I/O / peripheral function |
| Pin produk 38 | GPIOE3 — General purpose I/O / peripheral function |
| Pin produk 39 | GPIOE4 — General purpose I/O / peripheral function |
| Pin produk 40 | GPIOE5 — General purpose I/O / peripheral function |
| Pin produk 41 | GPIOE6 — General purpose I/O / peripheral function |
| Pin produk 42 | GPIOE7 — General purpose I/O / peripheral function |
| Pin produk 43 | GPIOF0 — General purpose I/O / peripheral function |
| Pin produk 44 | GPIOF1 — General purpose I/O / peripheral function |
| Pin produk 45 | GPIOF2 — General purpose I/O / peripheral function |
| Pin produk 46 | GPIOF3 — General purpose I/O / peripheral function |
| Pin produk 47 | GPIOF4 — General purpose I/O / peripheral function |
| Pin produk 48 | GPIOF5 — General purpose I/O / peripheral function |
| Pin produk 49 | GPIOF6 — General purpose I/O / peripheral function |
| Pin produk 50 | GPIOF7 — General purpose I/O / peripheral function |
| Pin produk 51 | VDD — Core supply voltage 3.3 V |
| Pin produk 52 | VSS — Ground |
| Pin produk 53 | AN0 — Analog input / ADC channel 0 |
| Pin produk 54 | AN1 — Analog input / ADC channel 1 |
| Pin produk 55 | AN2 — Analog input / ADC channel 2 |
| Pin produk 56 | AN3 — Analog input / ADC channel 3 |
| Pin produk 57 | AN4 — Analog input / ADC channel 4 |
| Pin produk 58 | AN5 — Analog input / ADC channel 5 |
| Pin produk 59 | AN6 — Analog input / ADC channel 6 |
| Pin produk 60 | AN7 — Analog input / ADC channel 7 |
| Pin produk 61 | AN8 — Analog input / ADC channel 8 |
| Pin produk 62 | AN9 — Analog input / ADC channel 9 |
| Pin produk 63 | AN10 — Analog input / ADC channel 10 |
| Pin produk 64 | AN11 — Analog input / ADC channel 11 |
| Pin produk 65 | PWM0A — PWM output channel 0A |
| Pin produk 66 | PWM0B — PWM output channel 0B |
| Pin produk 67 | PWM1A — PWM output channel 1A |
| Pin produk 68 | PWM1B — PWM output channel 1B |
| Pin produk 69 | PWM2A — PWM output channel 2A |
| Pin produk 70 | PWM2B — PWM output channel 2B |
| Pin produk 71 | PWM3A — PWM output channel 3A |
| Pin produk 72 | PWM3B — PWM output channel 3B |
| Pin produk 73 | PWM4A — PWM output channel 4A |
| Pin produk 74 | PWM4B — PWM output channel 4B |
| Pin produk 75 | PWM5A — PWM output channel 5A |
| Pin produk 76 | PWM5B — PWM output channel 5B |
| Pin produk 77 | TXD0 — SCI0 transmit (serial) |
| Pin produk 78 | RXD0 — SCI0 receive (serial) |
| Pin produk 79 | TXD1 — SCI1 transmit (serial) |
| Pin produk 80 | RXD1 — SCI1 receive (serial) |
| Pin produk 81 | MISO0 — SPI0 master-in slave-out |
| Pin produk 82 | MOSI0 — SPI0 master-out slave-in |
| Pin produk 83 | SCLK0 — SPI0 serial clock |
| Pin produk 84 | SS0 — SPI0 slave select |
| Pin produk 85 | CAN_TX — FlexCAN transmit |
| Pin produk 86 | CAN_RX — FlexCAN receive |
| Pin produk 87 | SDA — I2C serial data |
| Pin produk 88 | SCL — I2C serial clock |
| Pin produk 89 | TMS — JTAG test mode select |
| Pin produk 90 | TCK — JTAG test clock |
| Pin produk 91 | TDI — JTAG test data in |
| Pin produk 92 | TDO — JTAG test data out |
| Pin produk 93 | TRST — JTAG test reset |
| Pin produk 94 | RESET — External reset, active low |
| Pin produk 95 | EXTAL — External clock input |
| Pin produk 96 | XTAL — Crystal oscillator output |
| Pin produk 97 | CLKOUT — Clock output |
| Pin produk 98 | VDDA — Analog supply 3.3 V |
| Pin produk 99 | VSSA — Analog ground |
| Pin produk 100 | VREFH — ADC reference high |
| Pin produk 101 | VREFL — ADC reference low |
| Pin produk 102 | TD0 — Timer D channel 0 |
| Pin produk 103 | TD1 — Timer D channel 1 |
| Pin produk 104 | TD2 — Timer D channel 2 |
| Pin produk 105 | TA0 — Timer A channel 0 |
| Pin produk 106 | TA1 — Timer A channel 1 |
| Pin produk 107 | TA2 — Timer A channel 2 |
| Pin produk 108 | TA3 — Timer A channel 3 |
| Pin produk 109 | TB0 — Timer B channel 0 |
| Pin produk 110 | TB1 — Timer B channel 1 |
| Pin produk 111 | TB2 — Timer B channel 2 |
| Pin produk 112 | TB3 — Timer B channel 3 |
| Pin produk 113 | IRQ_A — External interrupt A |
| Pin produk 114 | IRQ_B — External interrupt B |
| Pin produk 115 | IRQ_C — External interrupt C |
| Pin produk 116 | IRQ_D — External interrupt D |
| Pin produk 117 | XIRQ — Non-maskable interrupt |
| Pin produk 118 | VDD — Core supply voltage 3.3 V |
| Pin produk 119 | VSS — Ground |
| Pin produk 120 | GPIOA8 — General purpose I/O / peripheral function |
| Pin produk 121 | GPIOA9 — General purpose I/O / peripheral function |
| Pin produk 122 | GPIOA10 — General purpose I/O / peripheral function |
| Pin produk 123 | GPIOA11 — General purpose I/O / peripheral function |
| Pin produk 124 | GPIOB8 — General purpose I/O / peripheral function |
| Pin produk 125 | GPIOB9 — General purpose I/O / peripheral function |
| Pin produk 126 | GPIOB10 — General purpose I/O / peripheral function |
| Pin produk 127 | GPIOB11 — General purpose I/O / peripheral function |
| Pin produk 128 | GPIOC8 — General purpose I/O / peripheral function |
| Pin produk 129 | GPIOC9 — General purpose I/O / peripheral function |
| Pin produk 130 | GPIOC10 — General purpose I/O / peripheral function |
| Pin produk 131 | GPIOC11 — General purpose I/O / peripheral function |
| Pin produk 132 | GPIOD8 — General purpose I/O / peripheral function |
| Pin produk 133 | GPIOD9 — General purpose I/O / peripheral function |
| Pin produk 134 | GPIOD10 — General purpose I/O / peripheral function |
| Pin produk 135 | GPIOD11 — General purpose I/O / peripheral function |
| Pin produk 136 | GPIOE8 — General purpose I/O / peripheral function |
| Pin produk 137 | GPIOE9 — General purpose I/O / peripheral function |
| Pin produk 138 | GPIOE10 — General purpose I/O / peripheral function |
| Pin produk 139 | GPIOE11 — General purpose I/O / peripheral function |
| Pin produk 140 | GPIOF8 — General purpose I/O / peripheral function |
| Pin produk 141 | GPIOF9 — General purpose I/O / peripheral function |
| Pin produk 142 | GPIOF10 — General purpose I/O / peripheral function |
| Pin produk 143 | GPIOF11 — General purpose I/O / peripheral function |
| Pin produk 144 | NC — Not connected (per datasheet) |
Aplikasi Umum
MC56F8346VFVE cocok untuk 6 aplikasis: Three-Phase Motor Control (FOC / Field-Oriented Control), Solar Micro-Inverter and DC-DC Power Conversion, Industrial Variable-Frequency Drives (VFD), Uninterruptible Power Supplies (UPS), Digital Audio Amplifiers and Class-D Amplifiers, Industrial Automation and Process Control.
Three-Phase Motor Control (FOC / Field-Oriented Control)
The MC56F8346VFVE's 60 MHz 56800E core delivers single-cycle MAC throughput that is essential for closed-loop field-oriented control of three-phase AC induction and brushless DC motors. Its integrated FlexPWM channels, quadrature decoder, and 12-bit ADC sample-and-conversion timing match the loop rate required for sinusoidal commutation at 20 kHz PWM. The 144-pin LQFP exposes enough GPIO and analog channels to drive three half-bridges with full fault protection. Unlike 32-bit Cortex-M parts, the 56800E core combines DSP math with MCU peripherals in one bus, keeping ISR latency predictable at high PWM rates.
Direkomendasikan
Solar Micro-Inverter and DC-DC Power Conversion
Solar micro-inverters and digital power converters require deterministic control loops with simultaneous ADC sampling, PWM update, and arithmetic. The MC56F8346VFVE integrates a 56800E DSP engine with on-chip PWM and ADC synchronization hardware, enabling peak-current-mode control and MPPT algorithms in firmware. The 128 KB flash holds complete control and communication firmware, while 3.0-3.6 V operation matches auxiliary rails after buck conversion from the PV bus. Compared with general-purpose MCUs, the 56800E core keeps DSP math offloaded from the main loop and avoids jitter-induced limit cycling.
Direkomendasikan
Industrial Variable-Frequency Drives (VFD)
Industrial VFDs demand robust DSP-class control across a wide speed range, with fault handling for over-current, over-voltage, and ground-fault events. The MC56F8346VFVE delivers 60 MHz DSP performance, industrial -40 C to +105 C temperature range, and the 144-LQFP peripheral complement needed to drive IGBT or MOSFET power stages up to several kW. Its on-chip CAN, SPI, and SCI enable integration with fieldbus networks (CANopen, Modbus). The 56800E toolchain (CodeWarrior) is mature in the motor-control market, shortening time-to-prototype for industrial drive designs.
Direkomendasikan
Uninterruptible Power Supplies (UPS)
Online UPS topologies require inverter control with low total harmonic distortion and fast transient recovery during load steps. The MC56F8346VFVE's DSP throughput enable full-state-feedback inverter control at high PWM rates, and its ADC/PWM synchronization supports simultaneous sampling of inductor current and output voltage. The 128 KB flash accommodates complex state-machine firmware for grid sync, battery management, and load-shedding logic. The 144-LQFP package exposes enough GPIO for relay drivers, status LEDs, and communication ports in a single chip.
Direkomendasikan
Digital Audio Amplifiers and Class-D Amplifiers
Class-D audio amplifiers benefit from DSP-grade math to implement feedback loops, dynamic range compressors, and speaker-protection algorithms at audio sample rates. The MC56F8346VFVE's single-cycle MAC, hardware DO loops, and 60 MHz clock can run a 48 kHz audio pipeline with margin for post-processing. Its PWM and timer units can drive a complementary-output full-bridge directly, while the 12-bit ADC samples output current for feedback. The 144-LQFP leaves pins free for I2S/SPI audio interface, button input, and LED feedback.
Direkomendasikan
Industrial Automation and Process Control
PLC and process-control modules require deterministic real-time control loops, multiple communication ports, and long-term firmware stability. The MC56F8346VFVE combines DSP-class PID performance with industrial peripherals (CAN, SPI, SCI), industrial -40 C to +105 C temperature, and 128 KB of on-chip flash for control and protocol stacks. The 144-LQFP exposes enough I/O to integrate a multi-axis motion module, PID loop module, and communication gateway into a single chip, reducing BOM cost versus a multi-MCU architecture.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC56F8346VFVE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC56F8346VFVER | MC56F8347VPY60 | MC56F8356VFVE | MC56F8146VFVE | MC56F8037VLH |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - identical | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same |
| Core | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) | 56800E (16-bit DSC) |
| Maximum Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Program Flash | 128 KB | 128 KB | 256 KB | 256 KB | 64 KB | 64 KB |
| Data Bus Width | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Diferensiator Kunci
- Largest flash in the 56F8346 sub-family with full LQFP-144 pin-out (vsMC56F8146VFVE)
- Legacy 56800E core with broad toolchain maturity (vsMC56F84786VLK)
- 60 MHz DSP-class math engine in an MCU form factor (vsMC56F8246VLF)
Catatan Desain
The MC56F8346VFVE requires a clean 3.3 V supply (3.0 V to 3.6 V) on each VDD/VSS pair. Place 100 nF ceramic decoupling capacitors as close as possible to every VDD pin and a single bulk 10 uF tantalum or ceramic at the regulator output. The ADC references (VDDA, VREFH, VREFL) must be bypassed separately with 100 nF + 10 uF to prevent digital switching noise from corrupting ADC samples. Estimated: total inrush for the 144-LQFP variant at 60 MHz full peripheral activity is approximately 80 mA; budget 150 mA for the LDO feeding this part.
The 144-LQFP package has a theta_JA of approximately 45 C/W on a 4-layer JEDEC test board, which is adequate for the MC56F8346VFVE's typical 80 mA core current at 60 MHz (estimated ~260 mW dissipation). For industrial designs at +105 C ambient, ensure that the copper thermal pad beneath the LQFP is well-grounded and that the top-layer copper pour covers at least 25% of the package footprint. If you place the part adjacent to a power stage, increase the copper area or reduce ambient to keep the junction below 125 C.
Keep ADC analog traces (AN0-AN11, VREFH, VREFL) short and away from PWM and digital switching traces. Use a ground guard ring around the ADC traces tied to VSSA. Place the external crystal (EXTAL/XTAL) within 5 mm of the IC pins, with the load capacitors returned to a quiet ground. Route TMS, TCK, TDI, TDO to a JTAG header with 4.7 kohm pull-ups on TMS and TCK for robust in-circuit programming.
Do not assume the LQFP-144 pin map matches the MAPBGA-144 of the same family - many pins have alternate-function multiplex differences that will break code if ported verbatim. Always enable the JTAG security bits in the final firmware to prevent unauthorized flash readout. Estimated: programming time for the full 128 KB flash is approximately 4-5 seconds via JTAG at 1 MHz; budget this for production programming fixtures.
Informasi Konformitas
RoHS and lead-free per NXP product page; industrial temperature -40 C to +105 C. Not qualified to AEC-Q100; for automotive, evaluate NXP's automotive-grade DSC portfolio (e.g. MC56F83686).