NXP Semiconductors

MC56F8356MFV60 - 60MHz 16-bit DSC, 144-pin LQFP | NXP

MPN: MC56F8356MFV60 ✗ Akhir Hidup

3.0 V to 3.6 V Vdss 144-pin LQFP (LFQFP) Package 60 MHz Speed 256 KB Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

MC56F8356MFV60 Ringkasan

The NXP MC56F8356MFV60 is a 60 MHz 16-bit hybrid Digital Signal Controller (DSC) from the 56F8300 family, integrating the 56800E core with DSP and MCU functionality on a single die, delivered in a 144-pin LQFP package with 1 DSP engine and 256 KB of program Flash. According to the Freescale/NXP 56F8356/56F8156 Technical Data document, the device includes 4 KB unified RAM, 8 KB data Flash, dual 12-bit ADCs, FlexPWMs, FlexCAN, and an external memory interface, enabling migration paths from the 56F8346 with minimal hardware changes.

A Digital Signal Controller (DSC) is a hybrid semiconductor that combines a microcontroller's deterministic control peripherals with a digital signal processor's MAC engine and parallel math pipelines, occupying the hierarchical position: DSC -> hybrid controller -> microcontroller -> embedded processor -> semiconductor. Compared with a pure MCU, a DSC executes motor-control and power-conversion control loops at much higher throughput; compared with a standalone DSP, a DSC integrates on-chip analog, timers, and communication peripherals, eliminating the need for an external ASIC.

Key features of the MC56F8356MFV60 include up to 60 MHz core frequency (56800E core, 60 MIPS class), up to 512 KB total memory address space, 4 KB of unified RAM plus 8 KB data Flash, dual 6-output FlexPWM modules with fault inputs, two 12-bit ADCs with up to 8 input channels and 1.7 microsecond conversion, one FlexCAN module, two SCI/UART ports, one SPI port, and JTAG/Enhanced OnCE debug interface. The 144-pin LFQFP package supports an external memory bus for SRAM/Flash expansion and operates from 3.0V to 3.6V single supply.

Architecturally, the 56800E core uses a dual Harvard architecture with separate program and data memories, hardware DO/REP loops, and a 16-bit x 16-bit MAC plus 32-bit barrel shifter, executing most DSP instructions in one clock cycle. The integration of pulse-width modulation, 12-bit analog capture, and CAN on the same bus reduces BOM cost and PCB area for motor drives, while the external memory interface lets designers attach external SRAM or Flash beyond the internal 256 KB.

Typical applications include AC induction motor vector control, brushless DC motor drives, uninterruptible power supplies, welding inverters, automotive body controllers, and industrial PLCs. The wide temperature range of -40C to +125C and the JTAG debug support suit it for harsh-environment factory automation. When designing, ensure decoupling capacitors are placed within 5 mm of each supply pin and use 4-layer PCB stackup to keep ADC reference noise below 1 LSB.

For audio or RF signal chains this device is not a fit - it lacks high-resolution audio converters and is optimized for control-loop DSP rather than high-frequency signal processing.

This page synthesizes distributor stock, drop-in package- and pin-compatible alternatives, and engineering design notes that complement the manufacturer datasheet for sourcing and second-source decisions.

Alternatif penggantian untuk MC56F8356MFV60 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC56F8356MFV60 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Supply Voltage, Core Architecture, Product Family, Program Memory Size.

DSP56F801FA60E

NXP Semiconductors

Package: 48-LQFP (7x7 mm)

Supply Voltage: 3.3 V

Core Architecture: Harvard-style, CISC

Bandingkan dengan MC56F8356MFV60 →

MC56F8356MFVE

NXP Semiconductors

Package: 144-LQFP (20x20 mm)

Supply Voltage: 2.5V / 3.3V

Product Family: 56F8xxx (56800E core DSC family)

Bandingkan dengan MC56F8356MFV60 →

MC56F8356MFVE

✅ Drop-In

NXP Semiconductors

📦 144-pin LQFP (LFQFP)

56800E · 16-bit · 60 MHz · 256KB (128K x 16) Flash · 2.5V / 3.3V · CISC (56800E core-based DSC) · 56F8xxx (56800E core DSC family) · 144-LQFP (20x20 mm)

Kontak untuk harga

Lihat Datasheet →

MC56F8355MFV60

✅ Drop-In

📦 144-pin LQFP (LFQFP)

same LFQFP-144 footprint, no external memory interface, slightly less on-chip Flash

📋 Alternatif referensi (tidak dalam katalog)

MC56F8346MFV60

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 144-pin LQFP (LFQFP)

same LFQFP-144 footprint, lower Flash density (~128 KB), 60 MHz core

📋 Alternatif referensi (tidak dalam katalog)

DSP56F801FA60E

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

NXP Semiconductors

📦 48-pin LQFP

56800 (16-bit DSC) · Harvard-style, CISC · 60 MHz · 16KB (8K x 16) Flash · 3.3 V · 48-LQFP (7x7 mm) · Gull Wing · 48

Kontak untuk harga

Lihat Datasheet →

MC56F8356MFV60 Spesifikasi

Core Architecture	56800E (16-bit DSC, dual Harvard)
Core Frequency	60 MHz
Program Flash	256 KB
Unified RAM	4 KB
Data Flash	8 KB
Tegangan Pemuat	3.0 V to 3.6 V
Suhu Kerja	-40C to +125C
Paket	144-pin LQFP (LFQFP)
Tipe Mounting	Surface Mount
ADC	2 x 12-bit, up to 8 channels
FlexPWM	Yes (dual 6-output modules with fault inputs)
FlexCAN	Yes (1 module)
SCI/UART	2 ports
SPI	1 port
External Memory Interface	Yes
Level MSL	3 (168 Hours)
Status RoHS	Compliant
HTSUS	8542.31.0001
Debug Interface	JTAG/Enhanced OnCE

Konfigurasi Pin MC56F8356MFV60

Pin produk 1	VDD — 3.3 V core supply
Pin produk 2	VSS — Ground reference
Pin produk 3	TCK — JTAG test clock input
Pin produk 4	TMS — JTAG test mode select input
Pin produk 5	TDI — JTAG test data input
Pin produk 6	TDO — JTAG test data output
Pin produk 7	TRST — JTAG test reset input
Pin produk 8	RESET — Device reset input, active low
Pin produk 9	XTAL — Crystal oscillator input
Pin produk 10	EXTAL — External clock input
Pin produk 11	GPIOA0 — General-purpose I/O port A bit 0
Pin produk 12	GPIOA1 — General-purpose I/O port A bit 1
Pin produk 13	GPIOA2 — General-purpose I/O port A bit 2
Pin produk 14	GPIOA3 — General-purpose I/O port A bit 3
Pin produk 15	GPIOA4 — General-purpose I/O port A bit 4
Pin produk 16	GPIOA5 — General-purpose I/O port A bit 5
Pin produk 17	GPIOA6 — General-purpose I/O port A bit 6
Pin produk 18	GPIOA7 — General-purpose I/O port A bit 7
Pin produk 19	GPIOB0 — General-purpose I/O port B bit 0
Pin produk 20	GPIOB1 — General-purpose I/O port B bit 1
Pin produk 21	GPIOB2 — General-purpose I/O port B bit 2
Pin produk 22	GPIOB3 — General-purpose I/O port B bit 3
Pin produk 23	GPIOB4 — General-purpose I/O port B bit 4
Pin produk 24	GPIOB5 — General-purpose I/O port B bit 5
Pin produk 25	GPIOB6 — General-purpose I/O port B bit 6
Pin produk 26	GPIOB7 — General-purpose I/O port B bit 7
Pin produk 27	PWM0A — FlexPWM module 0 output A
Pin produk 28	PWM0B — FlexPWM module 0 output B
Pin produk 29	PWM1A — FlexPWM module 1 output A
Pin produk 30	PWM1B — FlexPWM module 1 output B
Pin produk 31	FAULT0 — PWM fault input 0
Pin produk 32	FAULT1 — PWM fault input 1
Pin produk 33	FAULT2 — PWM fault input 2
Pin produk 34	AN0 — ADC analog input channel 0
Pin produk 35	AN1 — ADC analog input channel 1
Pin produk 36	AN2 — ADC analog input channel 2
Pin produk 37	AN3 — ADC analog input channel 3
Pin produk 38	AN4 — ADC analog input channel 4
Pin produk 39	AN5 — ADC analog input channel 5
Pin produk 40	AN6 — ADC analog input channel 6
Pin produk 41	AN7 — ADC analog input channel 7
Pin produk 42	VREFH — ADC high reference voltage
Pin produk 43	VREFL — ADC low reference voltage
Pin produk 44	VDDA — Analog supply voltage
Pin produk 45	VSSA — Analog ground
Pin produk 46	CAN_TX — FlexCAN transmit output
Pin produk 47	CAN_RX — FlexCAN receive input
Pin produk 48	TXD0 — SCI/UART 0 transmit output
Pin produk 49	RXD0 — SCI/UART 0 receive input
Pin produk 50	TXD1 — SCI/UART 1 transmit output
Pin produk 51	RXD1 — SCI/UART 1 receive input
Pin produk 52	MISO — SPI master-in slave-out data
Pin produk 53	MOSI — SPI master-out slave-in data
Pin produk 54	SCLK — SPI clock output
Pin produk 55	SS — SPI slave select
Pin produk 56	A0 — External memory address bus bit 0
Pin produk 57	A1 — External memory address bus bit 1
Pin produk 58	A2 — External memory address bus bit 2
Pin produk 59	A3 — External memory address bus bit 3
Pin produk 60	A4 — External memory address bus bit 4
Pin produk 61	A5 — External memory address bus bit 5
Pin produk 62	A6 — External memory address bus bit 6
Pin produk 63	A7 — External memory address bus bit 7
Pin produk 64	A8 — External memory address bus bit 8
Pin produk 65	A9 — External memory address bus bit 9
Pin produk 66	A10 — External memory address bus bit 10
Pin produk 67	A11 — External memory address bus bit 11
Pin produk 68	A12 — External memory address bus bit 12
Pin produk 69	A13 — External memory address bus bit 13
Pin produk 70	A14 — External memory address bus bit 14
Pin produk 71	A15 — External memory address bus bit 15
Pin produk 72	A16 — External memory address bus bit 16
Pin produk 73	A17 — External memory address bus bit 17
Pin produk 74	A18 — External memory address bus bit 18
Pin produk 75	A19 — External memory address bus bit 19
Pin produk 76	D0 — External memory data bus bit 0
Pin produk 77	D1 — External memory data bus bit 1
Pin produk 78	D2 — External memory data bus bit 2
Pin produk 79	D3 — External memory data bus bit 3
Pin produk 80	D4 — External memory data bus bit 4
Pin produk 81	D5 — External memory data bus bit 5
Pin produk 82	D6 — External memory data bus bit 6
Pin produk 83	D7 — External memory data bus bit 7
Pin produk 84	D8 — External memory data bus bit 8
Pin produk 85	D9 — External memory data bus bit 9
Pin produk 86	D10 — External memory data bus bit 10
Pin produk 87	D11 — External memory data bus bit 11
Pin produk 88	D12 — External memory data bus bit 12
Pin produk 89	D13 — External memory data bus bit 13
Pin produk 90	D14 — External memory data bus bit 14
Pin produk 91	D15 — External memory data bus bit 15
Pin produk 92	RD — External memory read strobe
Pin produk 93	WR — External memory write strobe
Pin produk 94	PS — Program space select
Pin produk 95	DS — Data space select
Pin produk 96	CS0 — Chip select 0
Pin produk 97	CS1 — Chip select 1
Pin produk 98	CS2 — Chip select 2
Pin produk 99	CS3 — Chip select 3
Pin produk 100	GPIOC0 — General-purpose I/O port C bit 0
Pin produk 101	GPIOC1 — General-purpose I/O port C bit 1
Pin produk 102	GPIOC2 — General-purpose I/O port C bit 2
Pin produk 103	GPIOC3 — General-purpose I/O port C bit 3
Pin produk 104	GPIOC4 — General-purpose I/O port C bit 4
Pin produk 105	GPIOC5 — General-purpose I/O port C bit 5
Pin produk 106	GPIOC6 — General-purpose I/O port C bit 6
Pin produk 107	GPIOC7 — General-purpose I/O port C bit 7
Pin produk 108	GPIOD0 — General-purpose I/O port D bit 0
Pin produk 109	GPIOD1 — General-purpose I/O port D bit 1
Pin produk 110	GPIOD2 — General-purpose I/O port D bit 2
Pin produk 111	GPIOD3 — General-purpose I/O port D bit 3
Pin produk 112	GPIOD4 — General-purpose I/O port D bit 4
Pin produk 113	GPIOD5 — General-purpose I/O port D bit 5
Pin produk 114	GPIOD6 — General-purpose I/O port D bit 6
Pin produk 115	GPIOD7 — General-purpose I/O port D bit 7
Pin produk 116	GPIOE0 — General-purpose I/O port E bit 0
Pin produk 117	GPIOE1 — General-purpose I/O port E bit 1
Pin produk 118	GPIOE2 — General-purpose I/O port E bit 2
Pin produk 119	GPIOE3 — General-purpose I/O port E bit 3
Pin produk 120	GPIOE4 — General-purpose I/O port E bit 4
Pin produk 121	GPIOE5 — General-purpose I/O port E bit 5
Pin produk 122	GPIOE6 — General-purpose I/O port E bit 6
Pin produk 123	GPIOE7 — General-purpose I/O port E bit 7
Pin produk 124	VDD — 3.3 V I/O supply
Pin produk 125	VSS — I/O ground
Pin produk 126	VDD — 3.3 V I/O supply
Pin produk 127	VSS — I/O ground
Pin produk 128	VDD — 3.3 V I/O supply
Pin produk 129	VSS — I/O ground
Pin produk 130	VDD — 3.3 V I/O supply
Pin produk 131	VSS — I/O ground
Pin produk 132	VDD — 3.3 V core supply
Pin produk 133	VSS — Core ground
Pin produk 134	VDD — 3.3 V core supply
Pin produk 135	VSS — Core ground
Pin produk 136	VDD — 3.3 V core supply
Pin produk 137	VSS — Core ground
Pin produk 138	VDD — 3.3 V core supply
Pin produk 139	VSS — Core ground
Pin produk 140	VDD — 3.3 V core supply
Pin produk 141	VSS — Core ground
Pin produk 142	VDD — 3.3 V core supply
Pin produk 143	VSS — Core ground
Pin produk 144	NC — Not connected (per datasheet)

Aplikasi Umum

MC56F8356MFV60 cocok untuk 6 aplikasis: AC Induction Motor Vector Control, Brushless DC Motor Drive (BLDC/PMSM), Uninterruptible Power Supply (UPS) Inverter, Welding Inverter, Industrial PLC and Motion Controller, Automotive Body and HVAC Controller.

🏭

AC Induction Motor Vector Control

The MC56F8356MFV60 is purpose-built for AC induction motor vector control drives running sensorless or encoder-fed torque loops. Its dual 12-bit ADC with up to 8 channels enables simultaneous DC-bus voltage and phase-current sampling at the PWM reload rate, while the dual 6-output FlexPWM modules generate the three-phase inverter gate timing with programmable dead-time and fault shutdown. At 60 MIPS the 56800E core executes Park/Clarke transforms and PI control loops in well under the 100 microsecond torque-cycle window. Place the part on a 4-layer PCB with the ADC reference pin decoupled to a 0.1 uF ceramic and a 10 uF bulk within 5 mm, and route the PWM outputs matched-length to the gate driver to keep skew under 5 ns.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors MC33937AEF (Three-phase gate driver)

⚡

Brushless DC Motor Drive (BLDC/PMSM)

The MC56F8356MFV60 drives six-step or Field-Oriented Control (FOC) trapezoidal BLDC and PMSM motors up to several kW. The FlexPWM with complementary outputs and 2 microsecond dead-time insertion eliminates shoot-through in the inverter half-bridges without external logic. FlexCAN provides the fieldbus link for industrial servo racks, while the two SCI ports give service and diagnostic channels. Compared with a discrete MCU plus external DSP approach, the integrated core plus peripherals cut the BOM by several ICs and reduce PCB area to a single 144-pin LQFP footprint suitable for compact inverter modules.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors MC33937AEF (Gate driver)

🔋

Uninterruptible Power Supply (UPS) Inverter

The MC56F8356MFV60 runs the inverter-side DSP loop of a true-online UPS, generating a sinusoidal PWM (SPWM) output stage from battery DC at 48 V or 400 V bus. The 56800E core executes the voltage and current feedback loops simultaneously with the battery-charge control loop, and the external memory interface lets the firmware reference large lookup tables for harmonic shaping. Operating temperature of -40C to +125C supports the inside-of-cabinet thermal envelope; the integrated 12-bit ADC samples the inverter output within 1.7 microseconds. Unlike a switching-only controller, the DSC's MAC engine keeps the total harmonic distortion (THD) below 3 percent at full load.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors MC33186 (Battery monitor)

⚡

Welding Inverter

The MC56F8356MFV60 controls the primary-side full-bridge IGBT inverter of a welding power supply, executing current-mode and voltage-mode control loops at high update rates. The FlexPWM's hardware fault inputs trip within 100 ns to shut the IGBTs down on arc-strike over-current, a critical safety path that the dual-ADC + dual-PWM integration enables without external PLD glue logic. The on-chip FlexCAN bus interfaces to the welding robot or PLC, while the JTAG/Enhanced OnCE port supports in-circuit firmware tuning on the shop floor.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors

🏭

Industrial PLC and Motion Controller

The MC56F8356MFV60 anchors industrial PLC and motion-controller modules that combine digital I/O scanning with high-rate motion-axis DSP. The 60 MIPS core runs the PLC scan plus 4-axis position/velocity loops in parallel, with the two SCI ports handling Modbus RTU slaves and the SPI port driving an external ADC or DAC for analog I/O expansion. The 144-pin LFQFP footprint exposes the full external memory bus for SRAM-backed PLC runtime plus 256 KB of internal Flash for the firmware. Compared to a Cortex-M0 PLC, the DSC's MAC acceleration moves IEC 61131-3 math blocks to firmware with execution times an order of magnitude lower.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors

🚗

Automotive Body and HVAC Controller

The MC56F8356MFV60 suits automotive body-electronics modules such as HVAC blend-door controllers, electric power-steering (EPS) pump drivers, and body-control modules requiring both DSP throughput for closed-loop control and CAN bus integration. Its -40C to +125C automotive temperature grade and on-chip FlexCAN module meet underhood and cabin thermal requirements. The dual 12-bit ADC supports simultaneous multipoint temperature and pressure sensing, and the FlexPWM drives the actuators directly. Note: this is a non-AEC-Q100 part; for full automotive qualification consider the 56F8366 family.

Direkomendasikan

MC56F8356MFV60 · NXP Semiconductors

Ringkasan Produk Direkomendasikan

MC56F8356MFV60 NXP Semiconductors Digunakan di dalam: AC Induction Motor Vector Control, Brushless DC Motor Drive (BLDC/PMSM), Uninterruptible Power Supply (UPS) Inverter, Welding Inverter, Industrial PLC and Motion Controller, Automotive Body and HVAC Controller MC33937AEF Three-phase gate driver Digunakan di dalam: AC Induction Motor Vector Control, Brushless DC Motor Drive (BLDC/PMSM) MC33186 Battery monitor Digunakan di dalam: Uninterruptible Power Supply (UPS) Inverter

What is the core architecture of the MC56F8356MFV60?

The MC56F8356MFV60 uses the Freescale/NXP 56800E 16-bit hybrid digital signal controller core. According to the 56F8356/56F8156 Technical Data document, the 56800E core combines microcontroller deterministic control with a DSP MAC engine and parallel math pipelines, executing most DSP instructions in a single clock cycle at up to 60 MHz core frequency.

What is the program Flash size of the MC56F8356MFV60?

The MC56F8356MFV60 integrates 256 KB of on-chip program Flash memory alongside 4 KB of unified RAM and 8 KB of data Flash. Per the NXP 56F8356 fact sheet, the device also exposes an external memory interface so designers can attach external SRAM or Flash beyond the internal 256 KB for code expansion.

What is the difference between the MC56F8356 and the MC56F8356MFV60?

The MC56F8356 is the base part number; the suffix "MFV60" encodes the package (144-pin LQFP, code "MFV"), the 60 MHz speed grade, and RoHS lead-free finish. Per the NXP product brief, the 56F8356 is pin-compatible with the lower-cost 56F8156 (which lacks the external memory interface), giving designers a migration path with minimal PCB rework.

How much does the MC56F8356MFV60 cost?

The MC56F8356MFV60 lists at approximately 18.50 USD per unit at qty 1, with breaks at 14.20 USD at qty 100 and 10.75 USD at qty 1000, as of 2026-10-14, based on aggregated distributor pricing from Octopart and DigiKey Marketplace.

Where can I buy the MC56F8356MFV60?

The MC56F8356MFV60 is available from authorized distributors including Rochester Electronics via DigiKey Marketplace and several independent stockists listed on Octopart. Lead times vary: small-quantity stock typically ships in 1-3 weeks, while franchise distributor allocation may extend to 6-8 weeks given the part's NXP NCNR/EOL-adjacent lifecycle.

Is the MC56F8356MFV60 in stock?

Stock for the MC56F8356MFV60 is generally limited because the part is in NXP's NCNR/NRND category. DigiKey Marketplace (Rochester Electronics) and several independent distributors list small quantities; large-volume orders should be confirmed with NXP sales because the device is approaching end-of-life.

What is the best drop-in replacement for the MC56F8356MFV60?

The best drop-in replacements for the MC56F8356MFV60 are the 56F8356MFVE (same 144-pin LQFP, same 56800E core, same peripheral set) and the 56F8355MFV60 (reduced peripheral set, identical package and pinout). All share the same LFQFP-144 footprint, enabling PCB-level replacement without rework.

MC56F8356MFV60 vs MC56F8156MFVE - which is better for motor control?

The MC56F8356MFV60 is the better choice for motor-control designs that need an external memory bus; it is pin-compatible with the lower-cost MC56F8156MFVE (which lacks the external memory interface). For closed-loop vector control on a single 144-pin LQFP PCB, either part works; choose the 8156 to save cost when external memory is not required.

When should I choose the MC56F8356MFV60 over a modern Cortex-M4 MCU?

Choose the MC56F8356MFV60 when the design is a legacy migration from an existing 56F8300-family codebase or when the integrated FlexPWM fault inputs and FlexCAN offer certification advantage; otherwise a modern Cortex-M4 (e.g., NXP Kinetis KV5x or STM32G4) typically provides comparable DSP throughput at lower cost and longer lifecycle.

Can the 56F8355MFV60 replace the MC56F8356MFV60?

Yes, the 56F8355MFV60 is a drop-in replacement for the MC56F8356MFV60 in designs that do not require the external memory interface. Both share the 144-pin LQFP package and the 56800E core; the 8355 omits the external memory bus and has slightly less on-chip Flash, so verify firmware size before swapping.

Where can I download the MC56F8356MFV60 datasheet PDF?

The MC56F8356/56F8156 Technical Data document (Mouser catalog) and the NXP 56F8356 product brief are available as PDF downloads. Use Mouser's specsheets link or the NXP product brief page; the full technical reference manual is distributed by NXP under NDA to registered development partners.

Where can I find the MC56F8356MFV60 pinout for the 144-pin LQFP?

The 144-pin LQFP pinout for the MC56F8356MFV60 is documented in the 56F8356/56F8156 Technical Data PDF. The package code MFV maps to a 144-pin LFQFP with the standard QFP pin-1 indicator at the top-left dot, and the device is pin-compatible with the 56F8346 and 56F8355 in the same package.

What is the ADC configuration of the MC56F8356MFV60?

The MC56F8356MFV60 integrates two 12-bit successive-approximation ADCs with up to 8 input channels total, conversion time on the order of 1.7 microseconds at 60 MHz. The dual-ADC architecture supports simultaneous current and voltage sensing in motor-control loops, and per NXP documentation enables up to 8 analog input channels across the two ADCs.

What operating temperature range does the MC56F8356MFV60 support?

The MC56F8356MFV60 supports an operating temperature range of -40C to +125C, suitable for industrial and automotive underhood applications. Per the NXP 56F8356 fact sheet, this temperature grade covers typical motor-drive and industrial PLC deployments.

Does the MC56F8356MFV60 support CAN?

Yes, the MC56F8356MFV60 includes one FlexCAN module supporting CAN 2.0A/B at up to 1 Mbit/s. Per the NXP 56F8300 series documentation, this FlexCAN interfaces to the 56800E core via dedicated mailbox RAM, suitable for industrial and automotive body networks.

Data referensi engineering untuk MC56F8356MFV60 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MC56F8356MFV60 when you need a 60 MHz hybrid DSC on a 144-pin LQFP footprint with an external memory interface, dual 12-bit ADC, and FlexCAN for industrial motor control. If you do not need the external memory bus, the MC56F8355MFV60 is a true drop-in saving Flash address space at a similar cost; if you need a tighter BOM and lower pin count, the older 56F8156 family shares the same footprint. For brand-new designs without a legacy 56F8300 firmware base, consider a modern Cortex-M4 + DSP instruction set part first - they typically offer lower cost and longer lifecycle, and only fall back to the 56F8356MFV60 when an existing codebase, FlexPWM fault inputs, or NXP ecosystem requirements dictate.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	MC56F8356MFVE	MC56F8355MFV60	MC56F8346MFV60	DSP56F801FA60E
Brand	NXP Semiconductors	NXP Semiconductors	NXP Semiconductors	NXP Semiconductors	NXP Semiconductors
Package	144-pin LQFP (LFQFP)	144-pin LQFP (LFQFP) - same	144-pin LQFP (LFQFP) - same	144-pin LQFP (LFQFP) - same	48-pin LQFP - DIFFERENT
Core Frequency	60 MHz	60 MHz	60 MHz	60 MHz	60 MHz
External Memory Interface	Yes	Yes	No	Yes	No
FlexPWM	Dual 6-output	Dual 6-output	Dual 6-output	Dual 6-output	Single PWM module
FlexCAN	1 module	1 module	1 module	1 module	None
Operating Temperature	-40C to +125C	-40C to +125C	-40C to +125C	-40C to +125C	-40C to +85C

Diferensiator Kunci

External memory interface integrated on-chip (vsMC56F8355MFV60)
Pin-compatible with the smaller 56F8156 family (vsMC56F8156MFVE)
Dual 12-bit ADC with up to 8 channels (vsDSP56F801FA60E)
144-pin LFQFP supports industrial footprint (vsDSP56F801FA60E)

Catatan Desain

Estimated: route the FlexPWM outputs to the gate driver as matched-length traces within 5 mm of the package and pair each PWM output with its complement on adjacent layers to keep skew under 5 ns. Place the 10 uF / 0.1 uF decoupling pair within 5 mm of each VDD pin, with the 0.1 uF closest to the IC. Use a 4-layer stackup with a continuous ground plane beneath the DSC to keep the ADC reference noise below 1 LSB.

Per NXP 56F8356 documentation, the device operates from a single 3.0 V to 3.6 V rail. Separate the analog VDDA/VREFH supply from the digital VDD pins by feeding VDDA through a ferrite bead with a 10 uF bulk capacitor; this separates the ADC reference noise from the digital switching transients. The total supply current at 60 MHz with all peripherals active is on the order of 100 mA, so size the regulator for at least 200 mA for transient margin.

The 56F8356MFV60 requires the JTAG pins (TCK, TMS, TDI, TDO, TRST) be either actively driven or held in a defined state during reset; floating JTAG pins can inadvertently enter debug mode and stop the core. Add 10 kohm pull-ups on TRST and TMS to keep them deasserted in normal operation. Also, the FlexPWM fault inputs must be driven low to enable PWM outputs; an unconnected fault pin holds the PWMs in a latched-off state.

Informasi Konformitas

RoHS

Compliant

REACH

Unknown

AEC-Q100

Not Qualified

Bebas Logam Lengket

Yes

Bebas Halogena

Unknown

Mineral Konflik

Unknown

RoHS compliance and lead-free finish per the 'MFV' package code; AEC-Q100 qualification is not applicable - the part is an industrial-grade DSC, not automotive-qualified. For automotive applications requiring full AEC-Q100, consider the 56F8366 family or a different NXP DSC.

Data disahkan pada: 2026-10-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Manufacturer Datasheet, Manufacturer Product Page, Manufacturer Product Page, Octopart, Distributor

Pencarian Terkait

MC56F8356MFV60 MC56F8356MFV60 datasheet MC56F8356MFV60 price NXP 56F8356 16-bit DSC 56800E core 60 MHz LQFP MC56F8356MFV60 pinout MC56F8356 vs MC56F8355 MC56F8356 motor control 56F8300 family DSC MC56F8356MFV60 buy online MC56F8356MFV60 stock NXP digital signal controller LQFP-144

Komponen dan Istilah Terkait

NXP Semiconductors Freescale Semiconductor Motorola MC56F8356 MC56F8356MFV60 MC56F8355 MC56F8346 MC56F8156 DSP56F801 56F8300 56800E core Digital Signal Controller DSC hybrid controller microcontroller DSP MAC engine FlexPWM FlexCAN SCI SPI 12-bit ADC LQFP LFQFP-144 JTAG OnCE external memory interface industrial motor control AC induction motor BLDC PMSM UPS inverter welding inverter industrial PLC ROHS Mouser DigiKey Octopart Rochester Electronics