NXP Semiconductors

MC9S08QD2CPC - 16MHz 8-Bit 2KB Flash MCU | NXP

MPN: MC9S08QD2CPC ✗ Akhir Hidup
8-pin DIP Package 16 MHz Speed 2 KB Memory
MOQ: 1 |

MC9S08QD2CPC Ringkasan

The NXP Semiconductors MC9S08QD2CPC is an 8-bit S08QD-family microcontroller built around the HCS08/S08 core, operating at up to 16 MHz with 2 KB of Flash memory in an 8-pin DIP package. It belongs to the cost-effective low-end S08 8-bit microcontroller architecture and is intended for compact embedded control tasks that require simple digital logic, timing, and peripheral integration without a larger mixed-signal or 32-bit MCU.

The MC9S08QD2CPC combines an 8-bit processor core, 2 KB of program Flash, and a maximum clock frequency of 16 MHz. Its 8-pin through-hole DIP package makes the device straightforward to prototype, manually assemble, and service with conventional breadboards or socket-based PCB layouts. The part is identified as an S08QD 8-bit MCU with an S08 core and DIP-8 construction, while related documentation describes the family as an HCS08 architecture.

The S08QD family is positioned as an economical platform for basic embedded systems. A design can use the MCU for motor or relay sequencing, simple keypad scanning, indicator control, switch debouncing, and low-complexity sensor conditioning. The 16 MHz operating speed provides additional timing headroom for multiple peripheral operations, while the 2 KB Flash capacity constrains the program size and favors compact, efficient code organization.

Compared with larger 8-bit and 32-bit microcontrollers, the MC9S08QD2CPC offers a deliberately small pin count and a low-capacity memory footprint. This makes it useful for cost-sensitive, space-constrained products where the application does not require large firmware storage, high pin count, high-speed interfaces, or complex analog conversion. The DIP format is particularly useful for education, proof-of-concept, repair, and low-volume control assemblies.

Designers should confirm the complete pin assignment, electrical limits, clock options, memory map, peripheral set, programming method, and operating-temperature grade against the NXP manufacturer documentation before release. The available product information identifies the core, clock, Flash capacity, and package, but it does not provide enough detail to reproduce a complete pin-level schematic without consulting the manufacturer datasheet.

This page combines the manufacturer product description, verified distributor identification, package information, cross-reference results, and practical engineering guidance for evaluating the MC9S08QD2CPC in embedded control designs.

Alternatif penggantian untuk MC9S08QD2CPC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC9S08QD2CPC (sama faktor bentuk dan footprint) — berbeda di dalam Instruction Set, Mounting Type, Package, Core, Debug Interface.

NXP Semiconductors
Instruction Set: HC08 with BGND
Package: 8-pin PDIP (DIP-8, 0.300 inch / 7.62 mm)
Core: HCS08 (enhanced 8-bit)
Bandingkan dengan MC9S08QD2CPC →
NXP Semiconductors
Instruction Set: HC08 with added BGND
Mounting Type: Through-hole (DIP)
Package: 8-pin PDIP (DIP-8, 0.300 inch / 7.62 mm)
Bandingkan dengan MC9S08QD2CPC →

MC9S08QD4MPC

✅ Drop-In
NXP Semiconductors
📦 8-PDIP
HCS08 (enhanced 8-bit) · HC08 with BGND · 16 MHz (8 MHz bus) · 4 KB · 256 bytes · 4-channel, 10-bit · 6 · 8-pin PDIP (DIP-8, 0.300 inch / 7.62 mm)

Kontak untuk harga

Lihat Datasheet →

MC9S08QD2CPC Rating Maksimal & Karakteristik Listrik

Product Type 8-bit microcontroller
Processor Core S08 core
Core Architecture HCS08
Processor Series S08QD
Frekuensi Bawah Maximum 16 MHz
Flash Memory 2 KB
Flash Organization 2K x 8 bits
Lebar Bus Data 8 bits
Paket 8-pin DIP
Package Type 8-PDIP
Tipe Mounting Through-hole
Jumlah Pin 8 pins
Instruction Set HC08 instruction set with BGND instruction
Debugging Background debugging system
Breakpoint Capability Single breakpoint
RoHS unknown

MC9S08QD2CPC 8-pdip Diamant Konfigurasi Panduan

Konfigurasi pin untuk MC9S08QD2CPC (8-pdip pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 8-pdip untuk MC9S08QD2CPC

Tidak ada data diatribut pin yang tersedia untuk MC9S08QD2CPC.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MC9S08QD2CPC cocok untuk 6 aplikasis: Basic Motor Sequencing Controller, Keypad and Indicator Interface, Appliance Control Module, Simple Sensor Hub, LED Sequencing and Display Control, Educational and Prototype Controller.

⚡

Basic Motor Sequencing Controller

The MC9S08QD2CPC fits low-power motor sequencing, step-direction control, and relay state management where a compact 8-bit controller is sufficient. Its S08 core operates up to 16 MHz, providing deterministic timing for debouncing inputs, sequencing drive stages, and updating outputs while the program remains within the 2 KB Flash limit. Place the MCU beside discrete driver circuitry and use local supply decoupling to keep switching transients away from the device. The principal trade-off is limited firmware capacity and eight-pin I/O flexibility, so complex motion profiles, large lookup tables, and advanced current control belong in a larger MCU platform.

🧩

Keypad and Indicator Interface

The MC9S08QD2CPC is suitable for compact key scanning, mode selection, status indication, and simple menu logic in appliances or small control panels. The 8-bit S08 core can execute debounce and state-machine code at up to 16 MHz, while the DIP-8 package simplifies prototype assembly and socket-based maintenance. Engineers should allocate pins carefully between the switch matrix, indicators, programming interface, supply, and ground. Its 2 KB Flash favors concise firmware and lookup tables; use MC9S08QD4MPC when expanding the interface requires more program space without changing the broader package and clock architecture.

🏭

Appliance Control Module

The MC9S08QD2CPC can support cost-sensitive appliance control blocks that coordinate discrete loads, timers, interlocks, and a small number of inputs. A 16 MHz S08 core provides enough execution speed for real-time state management, while the small 8-pin DIP package simplifies through-hole assembly and repair. Keep inductive loads and switching devices away from the MCU, use controlled drive circuits, and decouple the local supply close to the device. Because the available program memory is only 2 KB, applications with elaborate menus, logging, or multi-mode calibration are better served by the 4 KB MC9S08QD4MPC.

📱

Simple Sensor Hub

The MC9S08QD2CPC is appropriate for a small sensor-hub board that reads discrete sensors, evaluates thresholds, filters noisy inputs, and reports a local status. The 8-bit architecture at up to 16 MHz can perform regular sampling and control calculations without complex math pipelines. Analog sensor conditioning should be handled outside the MCU when precision conversion is required, because the verified product summary does not identify an on-chip ADC. The 2 KB firmware limit favors tightly written acquisition and filtering routines, while MC9S08QD4MPC offers additional space for calibration tables and expanded diagnostics.

💡

LED Sequencing and Display Control

The MC9S08QD2CPC can generate LED sequences, drive simple status indicators, and implement compact timing effects for small products. Its 16 MHz S08 core supports fast software timing and responsive user input, and the DIP-8 format is convenient for prototyping or socket-based assembly. Keep LED current outside the MCU limits by using suitable driver transistors, and design current-limiting paths to protect both the indicators and the supply. If animations, patterns, or multiple display modes consume more than 2 KB of code, the related 4 KB MC9S08QD4MCU provides additional program space while retaining the 8-pin DIP form factor.

🔧

Educational and Prototype Controller

The MC9S08QD2CPC is well suited to electronics education, proof-of-concept development, and small through-hole demonstration boards. Its DIP-8 package is easy to insert into a breadboard or socket, while the 2 KB Flash capacity encourages compact examples that demonstrate I/O, timing, and interrupt-driven control. Use a socket when repeated firmware updates and handling are expected, and follow the manufacturer programming and reset connections exactly. For more elaborate classroom projects requiring additional tables or routines, MC9S08QD4MPC preserves the same broad family architecture and clock while doubling the Flash capacity.

What is the MC9S08QD2CPC?
The MC9S08QD2CPC is an NXP Semiconductors 8-bit S08QD microcontroller with an HCS08/S08 processor core, a maximum clock frequency of 16 MHz, and 2 KB of Flash memory. It is supplied in an 8-pin DIP package. According to the NXP product information, the part is positioned as a cost-effective member of the S08 8-bit microcontroller architecture for compact embedded-control designs.
What are the key specifications of MC9S08QD2CPC?
The MC9S08QD2CPC combines an 8-bit S08 core, 16 MHz maximum operating frequency, 2 KB of Flash memory, and an 8-pin DIP package. The manufacturer identifies it as an S08QD part, while related technical material describes the HCS08 architecture, HC08 instruction set, BGND instruction, background debugging, and single-breakpoint capability. Use the manufacturer datasheet for RAM, pin-level functions, voltage limits, and timer details.
Where can I download the MC9S08QD2CPC datasheet PDF?
Download the MC9S08QD2CPC documentation from the official NXP product page at https://www.nxp.com/part/MC9S08QD2CPC. The page identifies the device as an S08QD 8-bit MCU with an S08 core, 2 KB Flash, 16 MHz operation, and DIP-8 packaging. It is the correct starting point for obtaining the current manufacturer datasheet and associated product documents.
Where can I find the MC9S08QD2CPC pinout?
Find the MC9S08QD2CPC pinout in the NXP manufacturer datasheet linked from the official product page. The verified product information confirms an 8-pin DIP package but does not expose the individual signal names or pin numbering. Use the pin-description table and package drawing in the datasheet when assigning power, ground, clock, reset, programming, and I/O connections.
What is the difference between MC9S08QD2CPC and MC9S08QD4MPC?
The MC9S08QD4MPC is a closely related 8-pin DIP S08QD-family device with the same 16 MHz clock and HCS08-class 8-bit architecture, but it provides 4 KB of Flash rather than the MC9S08QD2CPC's 2 KB. The verified comparison identifies this exact memory difference. The additional 2 KB favors larger firmware, while MC9S08QD2CPC may suit more compact code and cost-sensitive designs.
When should I choose MC9S08QD2CPC over MC9S08QD4MPC?
Choose the MC9S08QD2CPC when 2 KB of Flash is sufficient and the application can be implemented with the S08QD family's 8-bit core and 16 MHz clock. Choose the MC9S08QD4MPC when firmware size, table storage, or future code growth makes 4 KB preferable. Both parts are identified as 8-pin DIP devices in the same S08QD family, but final replacement requires pin-by-pin and peripheral-level verification.
Is the MC9S08QD2CPC suitable for basic motor control?
The MC9S08QD2CPC can suit basic motor-control tasks where the design uses discrete low-power drive stages, simple sequencing, and modest firmware. Its 16 MHz S08 core and 2 KB of Flash provide enough control capability for straightforward duty-cycle and state-machine logic. It is less suitable for advanced motion algorithms, large parameter tables, or designs requiring numerous dedicated peripherals.
Can MC9S08QD2CPC be used in a keypad and display controller?
The MC9S08QD2CPC is appropriate for compact keypad scanning and simple indicator or display-control functions when the interface does not require many dedicated pins or a large user interface. Its 8-bit S08 core can handle debouncing, key-state logic, and basic timing at up to 16 MHz. The 2 KB Flash limit and 8-pin package make careful pin budgeting essential.
What can replace the MC9S08QD2CPC?
The MC9S08QD4MPC is the closest identified same-family alternative because it retains an 8-bit S08QD MCU, 16 MHz clock, and 8-pin DIP format while increasing Flash from 2 KB to 4 KB. Treat it as a candidate replacement only after checking the complete pinout, supply pins, reset behavior, programming interface, peripherals, and application firmware requirements.
Is MC9S08QD2CPC the same as MC9S08QD4MPC?
No, the MC9S08QD2CPC and MC9S08QD4MPC are not identical. The MC9S08QD2CPC has 2 KB of Flash, while the MC9S08QD4MPC has 4 KB. Both are described as 16 MHz, 8-bit S08QD-family devices in 8-pin DIP packages, which makes the latter a useful same-family comparison, but firmware size and exact electrical and peripheral compatibility still require validation.
What is the best NXP alternative to MC9S08QD2CPC?
The MC9S08QD4MPC is the best directly identified NXP alternative because it preserves the S08QD family, 8-bit architecture, 16 MHz clock, and 8-pin DIP format. Its measurable difference is 4 KB of Flash versus 2 KB, offering 100% more program memory. A socketed prototype may simplify the transition, but production approval still requires pin, peripheral, timing, and firmware checks.
What is the MC9S08QD2CPC price?
Current pricing for the MC9S08QD2CPC should be obtained through the Request a Quote form on this page. The verified listings identify the exact MPN and package, but the available results do not expose a qualifying quantity-break table with explicit prices. Submit the required quantity, target date, and packaging needs through the quote form for a current order response.
Where can I buy MC9S08QD2CPC online?
Use the Request a Quote form on this page to buy the MC9S08QD2CPC. The exact NXP part is listed with an 8-PDIP package, so include the MPN and desired quantity in the request. The form provides the appropriate route for current availability, lead time, and order handling without relying on a static distributor price.
What is the lead time for MC9S08QD2CPC?
The current MC9S08QD2CPC lead time must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled allocation, and required delivery date. Provide the target quantity, shipment destination, and required date so the order can be reviewed against current supply conditions.
Is MC9S08QD2CPC in stock?
MC9S08QD2CPC availability should be checked through the Request a Quote form on this page. A distributor listing alone does not guarantee current stock or an immediate shipment allocation. Submit the quantity and required delivery date, and the order team will respond with the current availability and fulfillment position.
What design considerations apply to an 8-pin DIP MC9S08QD2CPC?
The 8-pin DIP format requires deliberate pin budgeting because power, ground, reset, clock, programming, and I/O functions compete for only eight connections. Place the decoupling capacitor close to the supply pins, provide a stable clock source, and reserve the programming interface for final programming and service. The DIP footprint is useful for prototypes, but through-hole inductance and connector placement should be checked in production designs.
Is MC9S08QD2CPC compliant with RoHS and REACH?
The MC9S08QD2CPC RoHS and REACH status must be confirmed from the current NXP product documentation and declaration of conformity. One technical result displays a RoHS field but does not provide a clear compliance conclusion, so the status is recorded as unknown in this product record. Do not infer environmental compliance from the component family or package alone.

Data referensi engineering untuk MC9S08QD2CPC — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MC9S08QD2CPC for compact embedded-control products that fit within 2 KB of Flash and need only the basic capabilities of the 8-bit S08QD architecture. Its 16 MHz clock is suitable for straightforward sequencing, keypad logic, discrete sensor handling, and appliance-control tasks, while the DIP-8 package simplifies prototypes, sockets, and low-volume repair. Choose MC9S08QD4MPC when the firmware is too large for 2 KB or when additional tables, modes, or diagnostics are required; it retains the identified 8-bit, 16 MHz, 8-pin DIP family configuration while doubling Flash capacity. Do not approve a replacement solely from package similarity. Verify the complete pinout, reset and clock arrangements, programming interface, peripheral functions, voltage limits, and existing firmware footprint against the manufacturer documentation before releasing an alternative into production.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MC9S08QD4MPC
Package 8-PDIP 8-PDIP - same
Brand NXP Semiconductors NXP Semiconductors
Processor Core S08 core S08 core
Data Bus Width 8 bits 8 bits
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 2 KB 4 KB
Processor Series S08QD S08QD

Diferensiator Kunci

  • Lower Flash capacity supports a compact control-function role (vsMC9S08QD4MPC)
  • Retains the same core architecture and clock capability (vsMC9S08QD4MPC)
  • Maintains the same DIP-8 mechanical format (vsMC9S08QD4MPC)

Catatan Desain

Plan the eight-pin footprint around the functions actually required by the application. Reserve pins for supply, ground, clock, reset, programming, and control signals before allocating general-purpose I/O. Place the local supply bypass capacitor immediately beside the device power pins and keep high-current switching paths separate from sensitive input traces. Because the individual pin names are not stated in the product listing, assign tracks only from the manufacturer pin-description table.

Confirm the allowed supply range, I/O limits, and power-sequencing requirements in the manufacturer datasheet before connecting external signals. The DIP package simplifies prototyping but does not remove the need for local decoupling or controlled drive stages. Use current limiting for LEDs and dedicated transistor or driver circuits for inductive and higher-current loads, ensuring the MCU controls drive inputs rather than carrying load current directly.

Do not assume that any 8-pin S08QD device is automatically interchangeable. The verified comparison identifies MC9S08QD4MPC as the same 8-bit, 16 MHz, 8-pin DIP family member with 4 KB Flash, but replacement also requires checking reset polarity, clock connections, programming signals, peripheral assignments, and interrupt usage. Recompile or relocate application code if the original design relies on the target part's 2 KB memory boundary.

For educational, prototype, or repair-oriented products, a socket can simplify MCU replacement and firmware updates, but the socket itself adds parasitic inductance and take-up. Keep the clock route short, maintain a continuous ground reference, and avoid routing programming or switching signals beneath the device where avoidable. Validate the final board with a scope at the supply pins during worst-case switching transitions.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The technical results identify a RoHS field but do not provide a clear compliance conclusion. Current environmental and material declarations must be confirmed in NXP product documentation.

Pencarian Terkait

MC9S08QD2CPC datasheet MC9S08QD2CPC datasheet pdf MC9S08QD2CPC pinout MC9S08QD2CPC specifications NXP MC9S08QD2CPC MC9S08QD2CPC 16MHz 2KB MC9S08QD2CPC DIP-8 MC9S08QD2CPC application circuit MC9S08QD2CPC vs MC9S08QD4MPC MC9S08QD2CPC replacement MC9S08QD2CPC equivalent MC9S08QD2CPC price MC9S08QD2CPC stock MC9S08QD2CPC lead time where to buy MC9S08QD2CPC

Komponen dan Istilah Terkait

NXP Semiconductors MC9S08QD2CPC MC9S08QD4MPC S08QD S08 core HCS08 8-bit microcontroller microcontroller embedded controller semiconductor HC08 instruction set BGND instruction background debugging system Flash memory 16 MHz 8-pin DIP 8-PDIP surface-mount package hierarchy through-hole package hierarchy embedded control motor sequencing keypad scanning sensor hub appliance control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ