MC9S12DJ64VPV - 16-Bit, 25MHz 64KB MCU | NXP
MPN: MC9S12DJ64VPV ✓ AktifMC9S12DJ64VPV Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one package. The HCS12 family belongs to the embedded-controller hierarchy: microcontroller -> 16-bit embedded controller -> automotive and industrial control platform. Such devices execute firmware for state machines, communications, signal processing, and control functions where deterministic embedded operation and a compact integrated design are important.
The principal identifiers are the 16-bit CPU architecture, 25 MHz operating frequency, 64 KB flash configuration, industrial temperature grade, and 112-LQFP package. Flash memory retains firmware without external program storage, while the 112-pin package provides a broad connection count for power, ground, reset, programming, clock, and peripheral signals. The 20 mm by 20 mm LQFP geometry is larger than modern QFN packages but supports board-accessible gull-wing leads and established automotive or industrial assembly practices.
The MC9S12DJ64VPV belongs to the MC9S12DJ64 family, making it suitable for embedded systems whose firmware is developed around the HCS12 instruction set and associated peripheral architecture. Its 25 MHz clock provides a 40 ns nominal processor cycle before instruction effects are considered. The 64 KB flash figure identifies the programmed-program-memory capacity, but developers should also consult the device documentation for RAM organization, peripherals, electrical limits, and pin multiplexing before finalizing a board.
Typical application classes include industrial equipment, automotive or transportation electronics, embedded control modules, and compact communication controllers. In each case, the controller can combine firmware-based sequencing with dedicated hardware interfaces while retaining 16-bit arithmetic and bit-oriented instruction support. A system design should budget flash for the application, diagnostics, boot functions, and future revisions rather than treating the full 64 KB as application code without reserving overhead.
PCB implementation should follow the 112-pin LQFP land pattern and the manufacturer’s recommended decoupling, clock, reset, programming, and power-routing guidelines. Because the exposed lead count supports numerous signals, careful planning is required to avoid conflicts between peripheral functions and programming interfaces. Confirm the exact pin multiplexing, pin states during reset, and external component requirements in the MC9S12DJ64 device documentation before schematic capture.
This product overview consolidates the verified device identity, package information, procurement considerations, pin-compatible family variants, and practical design guidance. It also distinguishes confirmed parameters from details that require review against the complete manufacturer documentation, helping engineers evaluate the MC9S12DJ64VPV before beginning PCB layout or firmware development.
Alternatif penggantian untuk MC9S12DJ64VPV — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MC9S12DJ64VPV (sama faktor bentuk dan footprint).
MC9S12DJ64VPVE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC9S12DJ64CPVE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MC9S12DJ64VPV Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit HCS12 microcontroller |
| CPU Architecture | 16-bit |
| Frekuensi Bawah Maximum | 25 MHz |
| Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 bits |
| Package Type | 112-LQFP |
| Package Dimensions | 20 mm x 20 mm |
| Lead Count | 112 leads |
| Lead Form | Gull wing |
| Package Shape | Square |
| Tipe Mounting | Surface mount |
| Temperature Grade | Industrial |
| Nominal Clock Period | 40 ns at 25 MHz |
MC9S12DJ64VPV square Diamant Konfigurasi Panduan
Konfigurasi pin untuk MC9S12DJ64VPV (square pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk MC9S12DJ64VPV.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MC9S12DJ64VPV cocok untuk 6 aplikasis: Industrial Equipment Controller, Automotive Body Electronics, Embedded Communication Module, Motor and Motion Control, Data Acquisition Controller, Instrumentation and Measurement.
Industrial Equipment Controller
The MC9S12DJ64VPV fits industrial embedded controllers that require a 16-bit CPU, 25 MHz clock, and 64 KB flash while retaining a conventional 112-LQFP interface. Its industrial temperature grade supports evaluation in controlled equipment environments. The controller can execute sequencing, diagnostics, and supervisory logic around external sensors and actuators. Designers should reserve flash for boot and update functions and verify the exact voltage, temperature, and peripheral limits in the device documentation.
Direkomendasikan
Automotive Body Electronics
The MC9S12DJ64VPV is suitable for body and transportation electronics requiring a deterministic 16-bit embedded processor, 25 MHz operating speed, and 64 KB of nonvolatile firmware. The 112-LQFP package provides a broad connection count for switches, sensors, communication devices, and power-management interfaces. Production approval should include a detailed check of temperature range, supply limits, AEC-Q100 status, reset behavior, and all peripheral assignments for the exact V suffix.
Direkomendasikan
Embedded Communication Module
The MC9S12DJ64VPV can serve as the central controller in a compact communication module where 64 KB of flash stores protocol handling, configuration, and application firmware. Its 25 MHz 16-bit architecture supports bit-oriented and byte-oriented processing, while the 112-pin package offers numerous potential peripheral connections. The final interface arrangement depends on the selected communication peripherals, pin multiplexing, clocking method, and electrical levels, all of which must be confirmed in the device documentation.
Direkomendasikan
Motor and Motion Control
The MC9S12DJ64VPV can coordinate sequencing and supervisory logic in motor-control systems that combine an embedded processor with external power devices. The 16-bit architecture, 25 MHz clock, and 64 KB flash provide capacity for closed-loop control code, diagnostics, and parameter handling, while the 112-lead package simplifies access to multiple control and communication signals. Current limiting, timing, protection, and feedback loops must be implemented with suitable external power electronics and reviewed against device-specific timer capabilities.
Direkomendasikan
Data Acquisition Controller
The MC9S12DJ64VPV is appropriate for compact data-acquisition and signal-conditioning modules that need local firmware execution rather than a host-dependent architecture. Its 64 KB flash can hold acquisition routines, calibration handling, and communication firmware, and the 25 MHz clock supports deterministic sampling-control logic. The system designer must map the required ADC, timer, serial, and digital I/O resources to valid pins, then implement suitable analog conditioning and isolation outside the microcontroller.
Direkomendasikan
Instrumentation and Measurement
The MC9S12DJ64VPV can act as the supervisory processor in a portable measurement instrument, coordinating acquisition, calibration, display updates, and external communication. Its 16-bit architecture and 25 MHz operation align with embedded control tasks, while 64 KB flash provides a defined firmware budget. The package has enough leads for power, clocks, programming, and peripheral assignments, although analog accuracy depends mainly on external converters, references, and careful grounding rather than the controller itself.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MC9S12DJ64VPV — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MC9S12DJ64VPVE | MC9S12DJ64CPVE |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) | 112-LQFP (20x20) |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
Diferensiator Kunci
- Exact target ordering suffix (vsMC9S12DJ64VPVE)
- No headline performance reduction (vsMC9S12DJ64CPVE)
- Broad 112-lead interface (vsMC9S12DJ64VPVE)
Catatan Desain
Implement the manufacturer’s 112-LQFP footprint with conventional gull-wing land geometry and verify pad dimensions, solder-mask clearance, and courtyard against the package drawing. Place the decoupling network close to the supply and ground pins named in the pin-description table. Route clocks and high-speed communication signals away from switching nodes, while keeping programming and debug access reachable for production programming.
Plan the supply network around the exact MC9S12DJ64VPV operating-voltage limits, regulator tolerance, startup current, and peripheral load. Use separate filtering paths for sensitive analog or communication supplies where the board design requires them. Confirm the reset and power-on behavior in the manufacturer documentation before assigning external supply states, because an incorrectly sequenced rail can prevent reliable code execution.
Do not treat MC9S12DJ64VPVE or MC9S12DJ64CPVE as automatic replacements merely because their packages are 112-LQFP. Both alternatives match the target’s 16-bit core, 25 MHz frequency, and 64 KB flash headline ratings, but order suffixes may alter temperature grade, qualification, or other ordering parameters. Review the full manufacturer part data before changing a released BOM or PCB.
Reserve firmware space for boot, diagnostics, field updates, and revision control within the 64 KB flash budget. If a bootloader or application update mechanism is required, define the memory map and reset-vector expectations before PCB routing and final firmware allocation. Also provide test points for supply, reset, clock, programming signals, and major communication buses to simplify board-level troubleshooting.
Informasi Konformitas
No verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MC9S12DJ64VPV order code. Confirm current declarations with NXP or the authorized supply chain before regulatory approval.