MCHC908GR8MFAE - 8KB Flash 8-bit HC08 MCU | NXP 32-LQFP
MPN: MCHC908GR8MFAE ✓ AktifMCHC908GR8MFAE Ringkasan
An 8-bit microcontroller (MCU) is a single-chip computer optimized for bit-oriented control and small data structures. The M68HC08 family builds on the legacy M68HC05 architecture with an enhanced CPU, additional addressing modes, a flash-friendly bus, and on-chip peripherals that allow direct replacement of older HC05 designs. Within the broader taxonomy, this part is an 8-bit MCU -> microcontroller -> flash port -> embedded controller -> semiconductor, and it remains a common denominator in space-constrained designs.
The MCHC908GR8MFAE features a 7.5 KB flash program memory, 256 B RAM, 16-bit timers, and integrated serial communication interfaces that simplify wiring backplane-style automotive networks. The flash-based program memory enables in-application reprogrammability, which simplifies firmware updates on the production line. The 8 MHz bus rate and low pin count deliver predictable deterministic execution in hard real-time loops.
The part is fabricated on a mature CMOS process optimized for low active current and wide automotive temperature operation. The 32-pin LQFP package exposes GPIO, timer I/O, and serial interface pins while keeping the PCB footprint compact at 7x7 mm. The architecture supports the standard HC08 instruction set, simplifying code portability from legacy HC05/HC08 designs.
Typical applications include automotive body controllers, instrument cluster sub-modules, low-end HVAC control panels, sensor conditioning nodes, and consumer appliances where small code size and low cost are paramount. The 32-LQFP footprint is widely supported by hand-soldering and reflow profiles.
When designing with this device, ensure that in-system programming pins are accessible on the PCB and that decoupling is placed close to the supply pins. The on-chip flash endurance and retention should be evaluated against the target field lifetime, especially for automotive applications.
Alternatif penggantian untuk MCHC908GR8MFAE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MCHC908GR8MFAE (sama faktor bentuk dan footprint) — berbeda di dalam Program Memory Size, RAM Size.
MCHC908GR8CFAE
✅ Drop-InKontak untuk harga
Lihat Datasheet →MCHC908GR8VFAE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MCHC908GR16CFAE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MC908GR8CBE
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MCHC908GR8MFAE Rating Maksimal & Karakteristik Listrik
| Core | M68HC08 |
| Lebar Bus Data | 8 bit |
| Program Memory Size | 7.5 KB (7.5K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 256 B |
| CPU Speed | 8 MHz |
| Timer | 16-bit |
| Serial Communication | SCI/SPI peripherals |
| Paket | 32-LQFP (7x7 mm) |
| Tipe Mounting | Surface Mount |
| Terminal Form | GULL WING |
| Package Shape | SQUARE |
| Temperature Grade | AUTOMOTIVE |
| Suhu Kerja | -40C to +125C (automotive grade) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin MCHC908GR8MFAE
| Pin produk 1 | IRQ — External interrupt request |
| Pin produk 2 | RST — Reset input |
| Pin produk 3 | VSS — Ground |
| Pin produk 4 | OSC1 — Oscillator input |
| Pin produk 5 | OSC2 — Oscillator output |
| Pin produk 6 | VDD — Supply voltage |
| Pin produk 7 | PTA0 — Port A bit 0 / GPIO |
| Pin produk 8 | PTA1 — Port A bit 1 / GPIO |
| Pin produk 9 | PTA2 — Port A bit 2 / GPIO |
| Pin produk 10 | PTA3 — Port A bit 3 / GPIO |
| Pin produk 11 | PTA4 — Port A bit 4 / GPIO |
| Pin produk 12 | PTA5 — Port A bit 5 / GPIO |
| Pin produk 13 | PTA6 — Port A bit 6 / GPIO |
| Pin produk 14 | PTA7 — Port A bit 7 / GPIO |
| Pin produk 15 | PTB0 — Port B bit 0 / GPIO |
| Pin produk 16 | PTB1 — Port B bit 1 / GPIO |
| Pin produk 17 | PTB2 — Port B bit 2 / GPIO |
| Pin produk 18 | PTB3 — Port B bit 3 / GPIO |
| Pin produk 19 | PTB4 — Port B bit 4 / GPIO |
| Pin produk 20 | PTB5 — Port B bit 5 / GPIO |
| Pin produk 21 | PTB6 — Port B bit 6 / GPIO |
| Pin produk 22 | PTB7 — Port B bit 7 / GPIO |
| Pin produk 23 | PTC0 — Port C bit 0 / GPIO or TCH0 |
| Pin produk 24 | PTC1 — Port C bit 1 / GPIO or TCH1 |
| Pin produk 25 | PTC2 — Port C bit 2 / GPIO or TCH2 |
| Pin produk 26 | PTC3 — Port C bit 3 / GPIO or TCH3 |
| Pin produk 27 | PTC4 — Port C bit 4 / GPIO or TCH4 |
| Pin produk 28 | PTC5 — Port C bit 5 / GPIO or TCH5 |
| Pin produk 29 | TXD — SCI transmit |
| Pin produk 30 | RXD — SCI receive |
| Pin produk 31 | SS — SPI slave select |
| Pin produk 32 | VDD — Supply voltage (secondary) |
Aplikasi Umum
MCHC908GR8MFAE cocok untuk 6 aplikasis: Automotive Body Controllers, HVAC Control Panels, Instrument Cluster Sub-Modules, Sensor Conditioning Nodes, Consumer Appliance Control, Industrial Control Modules.
Automotive Body Controllers
The MCHC908GR8MFAE's automotive temperature range (-40C to +125C) and 8-bit HC08 core with 7.5 KB flash make it a natural choice for low-speed automotive body controllers managing lighting, mirror adjustments, and accessory switching. With 8 MHz bus and 256 B RAM it executes simple PWM and switch-debounce tasks deterministically. Recommended companion MPNs: MC9S08DZ32AMLH, MC908GZ32VFUE.
Direkomendasikan
HVAC Control Panels
The MCHC908GR8MFAE fits HVAC control-panel applications where compact 32-LQFP footprint, low power, and 7.5 KB flash are sufficient to drive keypad scanning, LED indicators, and basic temperature regulation loops. Its automotive-grade qualification handles thermal stress near cabin HVAC modules. Companion MPNs: MC9S08QG4CFFE, MC9S08SH4MFK.
Direkomendasikan
Instrument Cluster Sub-Modules
Instrument cluster sub-modules that drive gauge stepper motors and warning lamps benefit from the MCHC908GR8MFAE's 16-bit timer for PWM generation and its automotive-grade temperature tolerance. The 32-LQFP provides sufficient GPIO for indicator and dimming functions while the HC08 core executes fast gauge updates. Companion MPNs: MC9S08SE4CRL, MC9S08DV48ACLF.
Direkomendasikan
Sensor Conditioning Nodes
The MCHC908GR8MFAE is well-suited for distributed sensor nodes that read analog signals, apply basic linearization, and forward data over a serial link. With 7.5 KB flash there is room for lookup tables and small calibration routines, while the 16-bit timer supports precise sampling intervals. Its low pin count keeps node PCB cost down. Companion MPNs: MC9S08QD4CSC, MC908QT2ACPE.
Direkomendasikan
Consumer Appliance Control
White-goods and small consumer appliances needing deterministic 8-bit control benefit from the MCHC908GR8MFAE's mature HC08 toolchain and proven flash endurance. With 7.5 KB flash the part hosts user-interface state machines, while the 16-bit timer drives motor PWM and buzzer tones. Its surface-mount 32-LQFP supports automated assembly. Companion MPNs: MC908QY4AMPE, MC908QC16MDTE.
Direkomendasikan
Industrial Control Modules
Industrial control modules such as relay drivers and small PLC expansion cards can use the MCHC908GR8MFAE for timing, debounce, and serial communication functions. Its wide operating temperature range supports factory-floor environments, while the automotive-grade qualification delivers long-term reliability. The 32-LQFP is easy to inspect and rework. Companion MPNs: MC9S12C32MPBE16, MC908AP16ACBE.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MCHC908GR8MFAE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MCHC908GR8CFAE | MCHC908GR8VFAE | MCHC908GR16CFAE | MC908GR8CBE |
|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same | 32-LQFP (7x7 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | M68HC08 8-bit | M68HC08 8-bit | M68HC08 8-bit | M68HC08 8-bit | M68HC08 8-bit |
| CPU Speed | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 7.5 KB | 7.5 KB | 7.5 KB | 15 KB | 7.5 KB |
| RAM | 256 B | 256 B | 256 B | 384 B | 256 B |
| Temperature Grade | Automotive | Commercial | Extended | Commercial | Automotive |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant |
Diferensiator Kunci
- Automotive temperature grade as standard (vsMCHC908GR8CFAE)
- Doubled flash for growing code bases (vsMCHC908GR16CFAE)
- Legacy HC05 code compatibility (vsMC908QT2ACPE)
Catatan Desain
Place a 100 nF decoupling capacitor as close as possible to each VDD pin of the MCHC908GR8MFAE to suppress switching transients on the internal 8 MHz bus. Add a bulk 10 uF tantalum or ceramic capacitor near the regulator output to handle inrush during flash programming. Avoid long VDD traces, which can resonate with the package lead inductance and cause voltage dips during peak CPU activity.
Route the OSC1/OSC2 traces as short as possible and keep them away from switching signals such as PWM outputs on PTC0-PTC5 to avoid coupling noise into the CPU clock. For the 32-LQFP footprint, use a continuous ground plane beneath the part to reduce EMI. Keep the reset pin trace short and add an external pull-up to VDD to ensure reliable reset behavior at power-up.
Do not exceed the maximum flash endurance specification when designing in-application reprogramming loops, or the part may fail in the field. Always configure unused GPIO pins as outputs to reduce quiescent current. Verify the watchdog timer is enabled for automotive safety-critical designs to recover from software lockups.
Informasi Konformitas
Automotive temperature grade per Vyrian. RoHS and REACH compliance per NXP standard documentation. AEC-Q100 status inferred from automotive temperature grade designation.