NXP Semiconductors

MKE02Z32VLH4 - 40MHz Cortex-M0+ 32KB MCU | NXP

MPN: MKE02Z32VLH4 ✓ Aktif
64-LQFP, 10 mm × 10 mm Package 40 MHz Speed 32 KB Memory
MOQ: 1 |

MKE02Z32VLH4 Ringkasan

The NXP Semiconductors MKE02Z32VLH4 is a 32-bit ARM Cortex-M0+ Kinetis KE02 microcontroller operating at up to 40 MHz, with 32 KB of Flash memory and 4 KB of SRAM in a 64-LQFP 10 mm × 10 mm package. Designed for cost-sensitive, high-reliability applications, it combines low-power operating modes with analog and digital peripherals for industrial and automotive designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Kinetis KE02 series occupies the Cortex-M0+ → 32-bit microcontroller → embedded processor → semiconductor hierarchy. Its compact architecture supports embedded control, signal monitoring, communications, and product-control tasks while reducing the component count required around a general-purpose processor.

The MKE02Z32VLH4 combines a 40 MHz Cortex-M0+ core with 32 KB of embedded Flash for firmware and 4 KB of SRAM for working data. Its low-power modes are suited to systems that spend substantial time idle or performing low-duty-cycle measurements. The KE02 family also emphasizes enhanced ESD and EMC performance for equipment operating in electrically noisy environments.

The device integrates analog, digital, communication, timing, and control peripherals into the same MCU. This integration supports designs that need mixed signal measurements, general-purpose control, and communication functions without relying on several separate discrete components. Flash-backed firmware storage also permits field-configurable behavior and simplifies production programming relative to ROM-only microcontrollers.

Typical uses include industrial control modules, motor and actuator controllers, appliance control boards, instrumentation, building equipment, automotive electronic modules, and low-cost sensor nodes. The 64-LQFP package offers enough I/O for external sensing and control while remaining practical for compact industrial electronics.

PCB implementation requires careful decoupling, grounding, and assignment of externally connected pins according to the manufacturer pin-description table. Place the required power capacitors beside their associated supply pins and preserve continuous ground-plane return paths. Firmware should use the low-power modes deliberately so peripheral states, interrupt wake-up behavior, and analog settling are validated as a complete system.

This product page combines the manufacturer specifications with package, procurement, comparison, and design guidance. It also identifies family alternatives where pin compatibility can be assessed, helping engineers decide when a higher-memory or higher-speed Kinetis E variant is appropriate for a new design.

Alternatif penggantian untuk MKE02Z32VLH4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MKE02Z32VLH4 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Product Type, Architecture, Supply Voltage.

NXP Semiconductors
Package: 32-LQFP, 7 mm × 7 mm
Product Type: 32-bit ARM Cortex-M0+ Microcontroller
Architecture: ARM Cortex-M0+
Bandingkan dengan MKE02Z32VLH4 →
NXP Semiconductors
Package: 44-LQFP, 10 mm x 10 mm
Flash Memory: 64 KB (64K x 8)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Bandingkan dengan MKE02Z32VLH4 →

MKE02Z32VLC4

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10x10)
32-bit ARM Cortex-M0+ Microcontroller · Kinetis KE02 · 40 MHz · 32 KB · 4 KB · ARM Cortex-M0+ · 3.3 V/5 V · 32-LQFP, 7 mm × 7 mm

Kontak untuk harga

Lihat Datasheet →

MKE02Z64VLD4

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10x10)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KE02 · 40 MHz · 64 KB (64K x 8) · 4 KB · ARM Cortex-M0+ · 3.3 V / 5 V · 44-LQFP, 10 mm x 10 mm

Kontak untuk harga

Lihat Datasheet →

MKE04Z128VLH4

✅ Drop-In
📦 64-LQFP (10x10)
Flash increases from 32 KB to 128 KB and maximum frequency from 40 MHz to 48 MHz in a related Kinetis E 64-LQFP device

📋 Alternatif referensi (tidak dalam katalog)

MKE02Z32VLH4 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit microcontroller
Product Family Kinetis KE02
Processor Core ARM Cortex-M0+
Maximum CPU Frequency 40 MHz
Flash Memory 32 KB
Flash Organization 32K × 8 bits
SRAM 4 KB
Paket 64-LQFP, 10 mm × 10 mm
Architecture 32-bit
Operating Modes Low-power modes
Integrated Peripherals Analog and digital peripherals
ADC Features 6-bit and 12-bit
ESD and EMC Performance Enhanced
Target Applications Cost-sensitive industrial and automotive designs
Status Lingkungan Hidup Active

MKE02Z32VLH4 64-lqfp, 10 mm × 10 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk MKE02Z32VLH4 (64-lqfp, 10 mm × 10 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 64-lqfp, 10 mm × 10 mm untuk MKE02Z32VLH4

Tidak ada data diatribut pin yang tersedia untuk MKE02Z32VLH4.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MKE02Z32VLH4 cocok untuk 6 aplikasis: Industrial Control Module, Automotive Electronic Control Unit, Appliance and Motor Controller, Battery-Powered Sensor Node, Instrumentation and Data Acquisition, Building Equipment Controller.

🏭

Industrial Control Module

The MKE02Z32VLH4 fits compact industrial controllers that combine digital control with limited analog measurement. Its 40 MHz Cortex-M0+ core provides useful processing speed for communication handling and supervisory logic, while 32 KB of Flash stores application firmware and 4 KB of SRAM supports working variables. Low-power modes help conserve energy during inactive periods. The device’s enhanced ESD/EMC performance is valuable in electrically noisy equipment. Place the MCU and supporting passives on a controlled ground plane, follow the NXP decoupling recommendations, and validate wake-up behavior with every attached peripheral.

🚗

Automotive Electronic Control Unit

The MKE02Z32VLH4 is suitable for cost-sensitive automotive electronic modules requiring a compact 32-bit controller. Its 40 MHz Cortex-M0+ core can handle control logic and communication tasks, while enhanced ESD/EMC performance supports operation in electrically demanding environments. The 64-LQFP package provides a practical pin count for mixed digital and analog connections. Before production release, verify the exact suffix’s automotive qualification, temperature grade, transient requirements, and supported diagnostics against the manufacturer datasheet and the vehicle program specification.

⚡

Appliance and Motor Controller

The MKE02Z32VLH4 can serve as the central controller in an appliance, actuator, or small motor-control assembly. Its 32-bit Cortex-M0+ architecture is appropriate for sequencing, fault detection, switch-state monitoring, and communication among functional modules, while low-power modes reduce consumption when the system is idle. The 64-LQFP package exposes more I/O than smaller MCU packages and supports integrated analog-to-digital conversion. Design the firmware around deterministic timer usage, debouncing, safe output states, and wake-up sources, and verify analog accuracy across the complete supply and temperature range.

🧩

Battery-Powered Sensor Node

The MKE02Z32VLH4 is appropriate for a compact, battery-powered sensor node that periodically measures and transmits data. Its low-power operating modes can reduce average energy use between measurements, and 32 KB of Flash is sufficient for firmware and configuration parameters. The 4 KB SRAM accommodates measurement buffers and protocol state without requiring an external memory device when the application remains modest. To maximize battery life, disable unused peripherals, minimize active polling, and use interrupt-driven acquisition. Confirm standby-current figures and wake-up timing in the NXP datasheet for the selected operating mode.

🔧

Instrumentation and Data Acquisition

The MKE02Z32VLH4 supports compact instrumentation that combines sensor conditioning, data acquisition, and local control. Its 6-bit and 12-bit ADC features provide conversion options for monitoring and control, while the 40 MHz core can process configuration, filtering, and communication tasks. The 64-LQFP package offers flexible I/O allocation for analog inputs and external interfaces. Preserve analog and digital return paths, follow the reference layout in the manufacturer datasheet, and calibrate measurements over the intended voltage, temperature, and clock ranges. Extra firmware or data-buffer capacity may justify the higher-memory MKE02Z64VLD4.

🏠

Building Equipment Controller

The MKE02Z32VLH4 is well matched to building equipment controllers that manage sensors, relays, communication links, and configurable operating profiles. Its low-power modes support efficient duty-cycled operation, and the integrated analog and digital peripherals reduce the need for separate interface components. A 64-LQFP package is practical for access, status, communication, and actuator connections. Use the pin-description table to assign multiplexing-sensitive functions, isolate noisy loads from sensitive analog routing, and validate restart behavior after brownout or supply interruption. Choose a higher-memory family member when profile storage and application code exceed the 32 KB configuration.

What are the key specifications of MKE02Z32VLH4 that engineers should know?
The MKE02Z32VLH4 is a 32-bit Kinetis KE02 microcontroller with a 40 MHz ARM Cortex-M0+ core, 32 KB of Flash memory, and 4 KB of SRAM. It is packaged in a 64-LQFP measuring 10 mm × 10 mm. According to the NXP product page, the device is active and combines low-power modes with analog and digital peripherals for cost-sensitive industrial and automotive designs.
What is the operating voltage of MKE02Z32VLH4?
The NXP MKE02Z32VLH4 is identified as a 5 V robust Kinetis KE02 microcontroller, but its complete minimum and maximum operating-voltage limits must be confirmed in the manufacturer datasheet. Use the power-pin specifications, absolute maximum ratings, and decoupling recommendations in that document when designing the supply rail; those detailed voltage values are not reproduced on the product page.
What is the processor core and clock speed of MKE02Z32VLH4?
The MKE02Z32VLH4 uses an ARM Cortex-M0+ processor core and operates at up to 40 MHz. The Cortex-M0+ architecture provides a compact 32-bit instruction set suited to embedded control rather than high-compute workloads. The NXP manufacturer product information confirms both the core and maximum frequency for this exact ordering code.
How much memory does MKE02Z32VLH4 have?
The MKE02Z32VLH4 includes 32 KB of Flash memory, organized as 32K × 8 bits, and 4 KB of SRAM. Flash stores firmware and nonvolatile configuration data, while SRAM provides volatile working memory. NXP describes the KE02 family as a cost-effective 32-bit platform with low power and high robustness for embedded applications.
What package does MKE02Z32VLH4 use?
The MKE02Z32VLH4 uses a 64-LQFP package measuring 10 mm × 10 mm. The NXP and distributor listings identify the device as a 64-LQFP microcontroller, with surface-mount assembly and a relatively compact land pattern for industrial designs. Assign every lead and exposed thermal behavior by consulting the manufacturer pinout and land-pattern drawings.
Where can I download the MKE02Z32VLH4 datasheet PDF?
The official MKE02Z32VLH4 datasheet can be obtained through the NXP product page at https://www.nxp.com/part/MKE02Z32VLH4. Select the linked Data Sheet document and verify that it is the revision covering the KE02 Sub-Family. The datasheet is the controlling source for pin names, electrical limits, memory maps, timing, and recommended application circuits.
Where can I find the MKE02Z32VLH4 pinout?
The MKE02Z32VLH4 pinout is found in the pin-description table and package drawings in the NXP manufacturer datasheet. The component uses a 64-LQFP outline, but the complete lead-by-lead assignments are not reproduced on this page. Use the datasheet when routing the 64 PCB lands, especially power, ground, reset, debug, clock, and analog inputs.
Is MKE02Z32VLH4 suitable for industrial control applications?
Yes, the MKE02Z32VLH4 is suitable for many cost-sensitive industrial control applications. Its 40 MHz Cortex-M0+ core, 32 KB Flash, 4 KB SRAM, low-power modes, and enhanced ESD/EMC performance support embedded control in electrically noisy equipment. The NXP product page specifically identifies industrial designs as a target application.
MKE02Z32VLH4 vs MKE02Z32VLC4: which is better for a new design?
Both parts belong to the MKE02Z32 32 KB Flash Kinetis KE02 family and are closely related, but the ordering suffixes still require review against temperature grade, qualification, and packing requirements. NXP describes MKE02Z32VLC4 as a pin-compatible entry point to the Kinetis E series. Select the exact suffix that matches the production environment rather than treating suffix codes as interchangeable without datasheet verification.
When should I choose MKE02Z32VLH4 over MKE02Z64VLD4?
Choose MKE02Z32VLH4 when 32 KB of Flash and 4 KB of SRAM are sufficient and the design benefits from the lower-memory Kinetis KE02 configuration. Choose MKE02Z64VLD4 when firmware growth or application complexity requires 64 KB of Flash. Because memory capacity can affect code organization, boot handling, and future upgrades, compare the complete product tables before finalizing the PCB.
What is the best drop-in replacement for MKE02Z32VLH4?
No universal drop-in replacement can be selected from the available family information without checking pin assignments, memory size, clock requirements, temperature grade, and qualification. MKE02Z32VLC4 is a close same-family candidate, while MKE02Z64VLD4 and MKE04Z128VLH4 offer additional memory or performance but require a detailed compatibility review. Confirm the exact replacement with the manufacturer datasheet and your application requirements.
Can MKE04Z128VLH4 replace MKE02Z32VLH4?
MKE04Z128VLH4 may serve as a same-package migration candidate because it is listed as a Kinetis E-family 64-LQFP microcontroller, but it is not a parameter-identical replacement. It provides 128 KB of Flash and up to 48 MHz, compared with 32 KB and 40 MHz for MKE02Z32VLH4. Review pin multiplexing, peripheral availability, clocking, startup behavior, and firmware requirements before substituting it.
What can replace MKE02Z32VLH4?
The closest supported migration path is within the NXP Kinetis E family because MKE02Z32VLC4, MKE02Z64VLD4, and MKE04Z128VLH4 appear in the same 64-LQFP ecosystem. A valid replacement must preserve the 64-LQFP land pattern and satisfy the board’s flash, SRAM, clock, peripheral, temperature, and qualification requirements. Treat higher-memory variants as redesign-capable alternatives rather than guaranteed drop-ins.
Where can I buy MKE02Z32VLH4 and check its current availability?
Use the Request a Quote form on this page to request current availability, procurement terms, and a quotation for MKE02Z32VLH4. The manufacturer lists the exact MPN as active, while channel inventory and lead time can change independently. Provide the required quantity, package form, and target delivery date so the request can be matched to the appropriate sourcing channel.
What is the price and lead time for MKE02Z32VLH4?
Current unit pricing and lead time for MKE02Z32VLH4 should be requested through the Request a Quote form on this page. The component is listed as active by NXP, but market price, stock, and delivery timing can change by quantity and order form. Submit the exact MPN, requested quantity, and delivery schedule for a current response.
Is MKE02Z32VLH4 in stock and how long is the lead time?
MKE02Z32VLH4 is an active NXP part, but current stock and lead time must be confirmed for the requested quantity through the Request a Quote form on this page. Availability can vary across package form, order volume, and production planning. Include your forecast quantities if you need planning for multiple production releases rather than a single prototype order.

Data referensi engineering untuk MKE02Z32VLH4 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose MKE02Z32VLH4 when a 40 MHz Cortex-M0+ controller, 32 KB Flash, 4 KB SRAM, and a 64-LQFP footprint meet the product requirements. It is especially appropriate for cost-sensitive industrial, automotive, instrumentation, and low-duty-cycle control products where low-power modes and robust ESD/EMC performance matter. Consider MKE02Z32VLC4 as the closest same-family ordering alternative after checking its suffix-specific environmental and qualification requirements. Choose MKE02Z64VLD4 when firmware growth requires 64 KB of Flash, and choose MKE04Z128VLH4 when 128 KB of Flash and up to 48 MHz justify a broader redesign review. Neither higher-memory option should be treated as automatically binary-compatible. For every candidate, verify pin multiplexing, SRAM, clocking, peripheral availability, startup behavior, temperature range, qualification, and package dimensions.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MKE02Z32VLC4 MKE02Z64VLD4 MKE04Z128VLH4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10x10) 64-LQFP (10x10) - same 64-LQFP (10x10) - same 64-LQFP (10x10) - same
Maximum CPU Frequency 40 MHz 40 MHz 40 MHz 48 MHz
Flash Memory 32 KB 32 KB 64 KB 128 KB
Architecture 32-bit 32-bit 32-bit 32-bit
Product Family Kinetis KE02 Kinetis KE02 Kinetis KE02 Kinetis KE04

Diferensiator Kunci

  • Exact 32 KB Kinetis KE02 configuration (vsMKE02Z64VLD4)
  • 40 MHz Cortex-M0+ performance (vsMKE04Z128VLH4)
  • 32 KB Flash with 4 KB SRAM (vsMKE04Z128VLH4)
  • Enhanced robustness for noisy environments (vsMKE02Z32VLC4)

Catatan Desain

Use the manufacturer’s recommended power network and place the required decoupling capacitors directly beside the corresponding VDD and VSS pins. Keep high-current return paths away from sensitive analog inputs, maintain a continuous ground plane, and route communications and debug signals away from switching nodes. Because the 64-LQFP footprint provides closely spaced leads, verify pad dimensions and paste volume against the current package drawing before releasing artwork.

Design the supply rail to meet the MKE02Z32VLH4’s voltage and sequencing limits from the manufacturer datasheet, including brownout behavior during startup and shutdown. Low-power modes reduce average consumption only when unused peripherals are disabled and wake-up sources are configured correctly. Test both active and standby current in the final board because external pull resistors, indicator circuits, and connected sensors can dominate the MCU’s own consumption.

Assign multiplexing-sensitive pins from the NXP pin-description table rather than relying on a generic 64-LQFP land pattern. Review each alternate function against the selected peripheral, debugger, and boot mode requirements. For analog measurements, use a quiet reference arrangement, minimize switching-current return paths through the MCU ground area, and allow sufficient acquisition settling time. Validate ADC readings with the exact resistor network and signal source used in production.

Do not treat a 64-LQFP package match as proof that firmware is binary-compatible. Check flash size, SRAM, clock limits, peripheral differences, pin multiplexing, reset behavior, and package dimensions for every proposed alternative. In particular, MKE02Z64VLD4 and MKE04Z128VLH4 add memory or speed, which can change linker placement, timing assumptions, and low-power configuration. Review the change-control and production-program implications before substitution.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer identifies MKE02Z32VLH4 as active, but the available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the current manufacturer documentation and the exact ordering code before production release.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

MKE02Z32VLH4 datasheet MKE02Z32VLH4 pinout MKE02Z32VLH4 datasheet pdf MKE02Z32VLH4 specifications MKE02Z32VLH4 equivalent MKE02Z32VLH4 replacement MKE02Z32VLH4 cross reference MKE02Z32VLH4 price MKE02Z32VLH4 stock MKE02Z32VLH4 vs MKE02Z32VLC4 MKE02Z32VLH4 footprint MKE02Z32VLH4 application circuit

Komponen dan Istilah Terkait

NXP Semiconductors MKE02Z32VLH4 MKE02Z32VLC4 MKE02Z64VLD4 MKE04Z128VLH4 Kinetis KE02 Kinetis KE04 ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller embedded processor semiconductor 32 KB Flash 4 KB SRAM 40 MHz 64-LQFP LQFP package family surface-mount package low-power mode analog-to-digital converter 6-bit ADC 12-bit ADC ESD performance EMC performance industrial control automotive electronics
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ