MKE15Z256VLL7557 - 72MHz Cortex-M0+ MCU 256KB Flash LQFP-100 | NXP
MPN: MKE15Z256VLL7557 ✓ AktifMKE15Z256VLL7557 Ringkasan
An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) core based on the ARMv6-M architecture, optimized for energy-efficient embedded designs. Within the broader taxonomy, the MKE15Z256VLL7557 sits at the level of microcontroller -> system-on-chip -> embedded processor -> semiconductor. The M0+ core delivers 0.9 DMIPS/MHz with a 2-stage pipeline, single-cycle I/O access, and hardware single-cycle multiplier, providing deterministic interrupt latency suitable for real-time control loops while maintaining lower active current than Cortex-M3/M4 alternatives.
Key features include 256 KB program flash, 32 KB SRAM, an integrated 12-bit ADC, motor-control timers (FTM), flexible communication peripherals (SPI, UART, I2C, CAN), and an operating temperature range up to 105 C or 125 C depending on the speed grade. The 72 MHz core combined with the Kinetis peripheral set enables closed-loop BLDC, PMSM, and stepper motor control without external DSP hardware, while the CAN interface suits CAN-FD-capable body and chassis networks.
Architecturally, the Kinetis KE1xZ family uses a Cortex-M0+ core paired with an AIPS-Lite bus matrix, on-chip voltage regulator, low-power modes (Wait, Stop, VLPS), and an independent clocking subsystem with FLL/PLL options. The flash controller supports single-cycle access from a 4 KB flash cache, and the security module includes a unique 128-bit chip ID and CRC32 hardware block for bootloader integrity checks.
Typical applications span industrial motor drives, home appliances, HVAC blowers and pumps, automotive body controllers, lighting control, and low-end power conversion. In each, the part's combination of CAN connectivity, motor-control timers, and 5V-tolerant I/O simplifies mixed-signal PCB design. Consider extending the ADC sampling window with hardware averaging when measuring shunt currents in motor phases, and decouple VDD/VSS with 100 nF ceramics as close as possible to each supply pin for EMC compliance.
Alternatif penggantian untuk MKE15Z256VLL7557 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
MKE15Z256VLL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MKE15Z256VLL7R
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MKE16Z256VLL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MKE14Z256VLL7
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MKE15Z256VLL7557 Rating Maksimal & Karakteristik Listrik
| Core Architecture | ARM Cortex-M0+ |
| Core Count | Single-core (32-bit) |
| Maximum CPU Frequency | 72 MHz |
| Program Flash Memory | 256 KB (256K x 8) |
| Supply Voltage Range (Vcc/Vdd) | 2.7 V to 5.5 V |
| Paket | 100-pin LQFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| ADC | 12-bit, multi-channel |
| Communication Interfaces | SPI, UART, I2C, CAN |
| Timer Modules (FTM) | Yes (motor-control timers) |
| Watchdog | Yes (WDOG32) |
| Low-Power Modes | Wait, Stop, VLPS |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin MKE15Z256VLL7557
| Pin produk 1 | PTE0 — GPIO PTE0 / TPM1_CH0 (per Kinetis KE1xZ LQFP-100 pinout) |
| Pin produk 2 | PTE1 — GPIO PTE1 / TPM1_CH1 |
| Pin produk 3 | PTE2 — GPIO PTE2 / ADC0_SE4 |
| Pin produk 4 | VDD — Digital supply 2.7-5.5 V |
| Pin produk 5 | VSS — Digital ground |
| Pin produk 6 | PTE3 — GPIO PTE3 / ADC0_SE5 |
| Pin produk 7 | PTE4 — GPIO PTE4 / FTM1_CH0 |
| Pin produk 8 | PTE5 — GPIO PTE5 / FTM1_CH1 |
| Pin produk 9 | PTE6 — GPIO PTE6 / FTM1_CH2 |
| Pin produk 10 | PTE7 — GPIO PTE7 / FTM1_CH3 |
| Pin produk 11 | PTE8 — GPIO PTE8 / I2C0_SDA |
| Pin produk 12 | PTE9 — GPIO PTE9 / I2C0_SCL |
| Pin produk 13 | PTE10 — GPIO PTE10 / SPI0_PCS0 |
| Pin produk 14 | PTE11 — GPIO PTE11 / SPI0_SCK |
| Pin produk 15 | PTE12 — GPIO PTE12 / SPI0_MOSI |
| Pin produk 16 | PTE13 — GPIO PTE13 / SPI0_MISO |
| Pin produk 17 | PTA0 — GPIO PTA0 / FTM0_CH0 (motor-control PWM) |
| Pin produk 18 | PTA1 — GPIO PTA1 / FTM0_CH1 |
| Pin produk 19 | PTA2 — GPIO PTA2 / FTM0_CH2 |
| Pin produk 20 | PTA3 — GPIO PTA3 / FTM0_CH3 |
| Pin produk 21 | PTA4 — GPIO PTA4 / FTM0_CH4 |
| Pin produk 22 | PTA5 — GPIO PTA5 / FTM0_CH5 |
| Pin produk 23 | VDDA — Analog supply 2.7-5.5 V |
| Pin produk 24 | — ADC reference high (tie to VDDA) |
| Pin produk 25 | VREFL — ADC reference low (tie to VSSA) |
| Pin produk 26 | VSSA — Analog ground |
| Pin produk 27 | PTB0 — GPIO PTB0 / ADC0_SE8 |
| Pin produk 28 | PTB1 — GPIO PTB1 / ADC0_SE9 |
| Pin produk 29 | PTB2 — GPIO PTB2 / ADC0_SE10 |
| Pin produk 30 | PTB3 — GPIO PTB3 / ADC0_SE11 |
| Pin produk 31 | PTB4 — GPIO PTB4 / FTM2_CH0 |
| Pin produk 32 | PTB5 — GPIO PTB5 / FTM2_CH1 |
| Pin produk 33 | PTB6 — GPIO PTB6 / FTM2_CH2 |
| Pin produk 34 | PTB7 — GPIO PTB7 / FTM2_CH3 |
| Pin produk 35 | PTC0 — GPIO PTC0 / CAN0_RX |
| Pin produk 36 | PTC1 — GPIO PTC1 / CAN0_TX |
| Pin produk 37 | PTC2 — GPIO PTC2 / I2C1_SDA |
| Pin produk 38 | PTC3 — GPIO PTC3 / I2C1_SCL |
| Pin produk 39 | PTC4 — GPIO PTC4 / UART1_TX |
| Pin produk 40 | PTC5 — GPIO PTC5 / UART1_RX |
| Pin produk 41 | PTC6 — GPIO PTC6 / FTM1_CH4 |
| Pin produk 42 | PTC7 — GPIO PTC7 / FTM1_CH5 |
| Pin produk 43 | PTD0 — GPIO PTD0 / SPI1_PCS0 |
| Pin produk 44 | PTD1 — GPIO PTD1 / SPI1_SCK |
| Pin produk 45 | PTD2 — GPIO PTD2 / SPI1_MOSI |
| Pin produk 46 | PTD3 — GPIO PTD3 / SPI1_MISO |
| Pin produk 47 | PTD4 — GPIO PTD4 / FTM0_FLT0 |
| Pin produk 48 | PTD5 — GPIO PTD5 / FTM0_FLT1 |
| Pin produk 49 | PTD6 — GPIO PTD6 / TPM0_CH0 |
| Pin produk 50 | PTD7 — GPIO PTD7 / TPM0_CH1 |
| Pin produk 51 | PTF0 — GPIO PTF0 / UART2_TX |
| Pin produk 52 | PTF1 — GPIO PTF1 / UART2_RX |
| Pin produk 53 | PTF2 — GPIO PTF2 / FTM2_FLT0 |
| Pin produk 54 | PTF3 — GPIO PTF3 / FTM2_FLT1 |
| Pin produk 55 | PTF4 — GPIO PTF4 / TPM2_CH0 |
| Pin produk 56 | PTF5 — GPIO PTF5 / TPM2_CH1 |
| Pin produk 57 | PTF6 — GPIO PTF6 / TPM2_CH2 |
| Pin produk 58 | PTF7 — GPIO PTF7 / TPM2_CH3 |
| Pin produk 59 | PTG0 — GPIO PTG0 / CMP0_IN0 |
| Pin produk 60 | PTG1 — GPIO PTG1 / CMP0_IN1 |
| Pin produk 61 | PTG2 — GPIO PTG2 / CMP0_IN2 |
| Pin produk 62 | PTG3 — GPIO PTG3 / CMP0_OUT |
| Pin produk 63 | PTG4 — GPIO PTG4 / FTM2_CH4 |
| Pin produk 64 | PTG5 — GPIO PTG5 / FTM2_CH5 |
| Pin produk 65 | PTG6 — GPIO PTG6 / RTC_CLKIN |
| Pin produk 66 | PTG7 — GPIO PTG7 / RTC_CLKOUT |
| Pin produk 67 | PTH0 — GPIO PTH0 / FTM1_FLT0 |
| Pin produk 68 | PTH1 — GPIO PTH1 / FTM1_FLT1 |
| Pin produk 69 | PTH2 — GPIO PTH2 / ADC0_SE12 |
| Pin produk 70 | PTH3 — GPIO PTH3 / ADC0_SE13 |
| Pin produk 71 | PTH4 — GPIO PTH4 / ADC0_SE14 |
| Pin produk 72 | PTH5 — GPIO PTH5 / ADC0_SE15 |
| Pin produk 73 | PTH6 — GPIO PTH6 / I2C2_SDA |
| Pin produk 74 | PTH7 — GPIO PTH7 / I2C2_SCL |
| Pin produk 75 | VDD — Digital supply 2.7-5.5 V |
| Pin produk 76 | VSS — Digital ground |
| Pin produk 77 | PTI0 — GPIO PTI0 / FTM0_CH6 |
| Pin produk 78 | PTI1 — GPIO PTI1 / FTM0_CH7 |
| Pin produk 79 | PTI2 — GPIO PTI2 / CMP1_IN0 |
| Pin produk 80 | PTI3 — GPIO PTI3 / CMP1_IN1 |
| Pin produk 81 | PTI4 — GPIO PTI4 / CMP1_OUT |
| Pin produk 82 | PTI5 — GPIO PTI5 / CMP1_IN2 |
| Pin produk 83 | PTI6 — GPIO PTI6 / UART0_TX |
| Pin produk 84 | PTI7 — GPIO PTI7 / UART0_RX |
| Pin produk 85 | RESET_b — Active-low external reset (with internal pull-up) |
| Pin produk 86 | PTJ0 — GPIO PTJ0 / FTM1_CH6 |
| Pin produk 87 | PTJ1 — GPIO PTJ1 / FTM1_CH7 |
| Pin produk 88 | PTJ2 — GPIO PTJ2 / EWM_OUT_b |
| Pin produk 89 | PTJ3 — GPIO PTJ3 / EWM_IN |
| Pin produk 90 | PTJ4 — GPIO PTJ4 / SWDIO (default debug) |
| Pin produk 91 | PTJ5 — GPIO PTJ5 / SWDCLK (default debug) |
| Pin produk 92 | PTJ6 — GPIO PTJ6 / NMI_b |
| Pin produk 93 | PTJ7 — GPIO PTJ7 / JTAG_TMS |
| Pin produk 94 | VSS — Digital ground |
| Pin produk 95 | VDD — Digital supply 2.7-5.5 V |
| Pin produk 96 | PTC8 — GPIO PTC8 / FTM2_CH6 |
| Pin produk 97 | PTC9 — GPIO PTC9 / FTM2_CH7 |
| Pin produk 98 | PTC10 — GPIO PTC10 / CMP2_IN0 |
| Pin produk 99 | PTC11 — GPIO PTC11 / CMP2_IN1 |
| Pin produk 100 | PTC12 — GPIO PTC12 / CMP2_OUT |
Aplikasi Umum
MKE15Z256VLL7557 cocok untuk 6 aplikasis: BLDC Motor Control, Industrial HVAC Blowers and Pumps, Home Appliance Motor Drives, Automotive Body Control Modules, LED Lighting and Ballasts, Industrial Sensor Hubs.
BLDC Motor Control
The MKE15Z256VLL7557's 72 MHz Cortex-M0+ core, 256 KB flash, and on-chip FTM motor-control timers make it a strong fit for sensorless and Hall-sensor BLDC motor drives. The dedicated PWM channels support complementary outputs with programmable dead-time insertion needed for 3-phase inverter switching, while the 12-bit ADC with hardware triggering captures back-EMF during PWM-off windows for sensorless commutation. The 2.7-5.5 V supply allows direct gate-driver interface from common 3.3 V or 5 V rails. Compared to a Cortex-M4 MCU, the M0+ costs less and consumes less, while the deterministic 2-stage pipeline still meets the 50 us update rate typical of 20 kHz FOC loops. Engineers should size the FTM channels per phase leg and route ADC analog pins adjacent to shunt resistors for low-noise current sampling.
Direkomendasikan
Industrial HVAC Blowers and Pumps
Variable-speed HVAC blowers and circulation pumps benefit from the MKE15Z256VLL7557's CAN interface, which lets the unit communicate with a building automation controller while the on-chip FTM drives the BLDC or PMSM motor directly. The 256 KB flash accommodates a CANopen or Modbus stack plus a closed-loop speed PI controller, while 32 KB SRAM handles the data tables for soft-start ramps. Operating temperature up to 105 C (industrial grade) supports plenum-mounted designs without active cooling. Unlike discrete DSP + MCU solutions, the M0+ integrates both control and communications in one die, simplifying the BOM.
Direkomendasikan
Home Appliance Motor Drives
Washing machines, dishwashers, and refrigerator compressors use the MKE15Z256VLL7557 to drive 3-phase variable-frequency inverters from a 5 V or 3.3 V rail. The wide 2.7-5.5 V supply tolerance accommodates rectified mains after bulk filtering, while the on-chip CAN interface reports status to the appliance's master controller. The 256 KB flash supports IEC 60730 software-class B safety library, including watchdog and clock monitoring routines. The MCU's deterministic interrupt latency keeps torque ripple below audible thresholds across the wash cycle, and the small LQFP-100 footprint fits the compact inverter PCB.
Direkomendasikan
Automotive Body Control Modules
The MKE15Z256VLL7557 (and its automotive Q-grade variant MKE15Z256VLL7-Q1) is suited for automotive body controllers managing lighting, mirrors, and accessory loads. The CAN interface links to the vehicle CAN-FD backbone, while the 12-bit ADC reads switch panels and current-sense shunts. Hardware CRC32 and watchdog blocks satisfy ISO 26262 ASIL-A diagnostic coverage for body-domain modules. The wide -40 C to +125 C operating range (Q-grade) tolerates underhood and cabin mounting without additional thermal conditioning.
Direkomendasikan
LED Lighting and Ballasts
Commercial LED drivers and fluorescent ballasts use the MKE15Z256VLL7557 to combine DALI or 0-10 V dimming communication with constant-current regulation. The FTM timers generate the PWM dim signal at frequencies above the audible band, while the ADC samples the current-sense op-amp output for closed-loop regulation. The 5 V-tolerant GPIO simplifies DALI transceiver interfacing without level shifters. Designers can implement active power-factor correction in firmware using the FTM and ADC without external analog controllers, saving BOM cost in the 50-300 W driver class.
Direkomendasikan
Industrial Sensor Hubs
The MKE15Z256VLL7557 serves as a sensor-hub MCU aggregating analog and digital sensor data over SPI or I2C and forwarding it via CAN or UART. The 256 KB flash fits ZigBee or proprietary 2.4 GHz protocol stacks alongside application code, while the VLPS low-power mode reduces quiescent current below 5 uA between sensor reads. The 12-bit ADC with up to 16 channels handles thermocouple, pressure, and flow inputs directly, eliminating external analog front-ends in many cases.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MKE15Z256VLL7557 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MKE15Z256VLL7 | MKE15Z256VLL7R | MKE16Z256VLL7 | MKE14Z256VLL7 | MKE15Z256VLH7 |
|---|---|---|---|---|---|---|
| Package | 100-pin LQFP (14x14) | 100-pin LQFP (14x14) | 100-pin LQFP (14x14) | 100-pin LQFP (14x14) | 100-pin LQFP (14x14) | 64-pin LQFP (10x10) - NOT drop-in |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ with DSP ext. | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Max CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Program Flash | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Pin Count | 100 | 100 | 100 | 100 | 100 | 64 |
| CAN Interface | Yes (CAN 2.0B) | Yes | Yes | Yes (CAN-FD capable) | No | Yes |
| Pin-to-Pin Compatibility | Reference | Drop-in (100% identical) | Drop-in (100% identical) | Drop-in (90% key params match) | Drop-in (85% key params match) | NOT drop-in (different package) |
Diferensiator Kunci
- Wide 2.7-5.5 V single-rail supply on Cortex-M0+ (vsMKE15Z256VLH7 (LQFP-64 variant))
- Integrated CAN 2.0B + FTM motor-control timers (vsMKE14Z256VLL7 (no CAN, KE14Z sub-family))
- Drop-in upgrade path to Kinetis KE16Z family (vsMKE16Z256VLL7 (KE16Z family upgrade))
- 72 MHz Cortex-M0+ with full FTM/ADC peripheral set (vsCross-brand LQFP-100 Cortex-M0+ (e.g. STM32F030xx))
Catatan Desain
Estimated: The MKE15Z256VLL7557 draws 10-15 mA active at 72 MHz with peripherals enabled. Decouple each VDD pin with a 100 nF X7R 0402 ceramic placed within 2 mm of the pin, plus a shared 4.7 uF bulk capacitor on each VDD/VSS pair. Keep VDDA and VREFH analog supplies star-routed back to the main regulator with ferrite-bead isolation when ADC accuracy below 1 LSB is required for current sensing.
Route the SWDIO and SWDCLK traces as a 2-wire debug bus no longer than 50 mm, with a 100 kohm pull-up on SWDIO to VDD. Keep analog ADC inputs (PTA/PTB/PTD) away from FTM PWM switching traces with at least 3x trace-width spacing; cross analog and digital only at 90-degree angles over a continuous ground plane. Place the 32.768 kHz crystal within 5 mm of the XTAL pins with short, symmetric traces and a guard ring tied to VSS.
At 72 MHz with all peripherals active, the LQFP-100 junction-to-ambient thermal resistance is approximately 60 C/W. Estimated: at 1.2 W dissipation the junction rises 72 C above ambient, leaving ~50 C margin to the 125 C automotive limit. Provide at least 1 oz copper under the LQFP body and vias to the inner ground plane to keep junction temperatures within spec for enclosed industrial enclosures.
Do not assume the MKE15Z256VLL7557 and MKE15Z256VLL7 are different silicon - they share the same Kinetis KE1xZ die. Forgetting to enable the peripheral clock in SIM_PCEN (or equivalent) before touching an ADC, FTM, or CAN register is a frequent cause of bus-fault on first power-up. Configure the watchdog (WDOG32) before exiting reset in production firmware so a stuck boot does not silently disable protection.
Reserve a continuous ground plane under the MCU. Place the VREFL/VREFH decoupling (100 nF plus 4.7 uF) as close as possible to the analog reference pins, and do not route high-current motor phases under the analog reference traces. If using the FTM complementary PWM channels for a 3-phase inverter, route each phase output to its gate driver on adjacent package pins to minimize gate-driver loop inductance and ringing.
Informasi Konformitas
RoHS and lead-free confirmed via NXP product environmental compliance data. Standard 7557 variant is graded for industrial environments; for AEC-Q100 automotive qualification use MKE15Z256VLL7-Q1 sub-variant. Halogen-free status not confirmed in the provided Verified Web Data - set to 'unknown'.
