MSP430F4250IDL - 8MHz 16KB Mixed-Signal MCU | TI
MPN: MSP430F4250IDL ✓ AktifMSP430F4250IDL Ringkasan
A mixed-signal microcontroller is an embedded controller that integrates digital processing with analog conversion functions. The MSP430F4250 belongs to the MSP430x4xx family of mixed-signal microcontrollers, where the RISC core, Sigma-Delta ADC, DAC, LCD interface, timers, and communication peripherals share one low-power platform. Its architecture targets instruments that need accurate measurement, local display output, and extended battery life without requiring a separate analog converter.
Principal features include an 8 MHz maximum clock, 16 KB of Flash program memory, 256 bytes of RAM, and a 56-segment LCD driver. The analog subsystem includes one 16-bit Sigma-Delta ADC and one 12-bit DAC. The manufacturer lists five power-saving modes, standby wake-up in less than 6 us, and active-mode current of 250 uA at 1 MHz and 2.2 V. These characteristics support responsive sensing systems with controlled energy use.
The 16-bit RISC architecture uses a compact instruction set, while the Sigma-Delta ADC is intended for measurement signals that require resolution rather than very high conversion speed. The LCD driver supports segmented display applications, reducing the need for external display-control hardware in many designs. Together, these resources allow one device to acquire a sensor signal, process it digitally, update a display, and manage control or communications functions within a compact embedded design.
Typical uses include precision temperature measurement, industrial process monitoring, portable test instruments, battery-powered data loggers, and embedded panel meters. The 12-bit DAC can generate reference or control voltages, while the 56-segment LCD driver supports local numerical or status displays. For designs needing more flash, RAM, display segments, or a specific communications peripheral, engineers should compare the MSP430F4250 with other MSP430x4xx devices before finalizing the BOM.
The main design consideration is the 1.8 V to 3.6 V operating range. Signal inputs, ADC references, LCD drive levels, and external interfaces must remain compatible with this supply range. Component selection should also account for the 48-pin SSOP footprint, pin multiplexing, memory limits, and the different low-power current figures associated with each operating mode.
This product overview combines the manufacturer's device features with package, memory, analog-conversion, interface, and purchasing considerations. It also identifies same-footprint family options and explains where firmware, peripheral, qualification, or packaging differences must be checked before a replacement is approved.
Alternatif penggantian untuk MSP430F4250IDL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
MSP430F4250IDLR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MSP430FG4250IDL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MSP430F4250IDL Rating Maksimal & Karakteristik Listrik
| Product Type | Mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC |
| Frekuensi Bawah Maximum | 8 MHz |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Flash Memory | 16 KB (16K x 8) |
| RAM | 256 bytes |
| ADC | 1 x 16-bit Sigma-Delta ADC |
| DAC | 1 x 12-bit DAC |
| LCD Driver | 56 segments |
| Active Mode Current | 250 uA at 1 MHz and 2.2 V |
| Standby Mode Current | 1.1 uA |
| Off Mode Current | 0.1 uA with RAM retention |
| Power-Saving Modes | 5 modes |
| Standby Wake-Up Time | Less than 6 us |
| Rentang Suhu Kerja | -40 C to +85 C |
| Paket | 48-pin SSOP (DL) |
| Tipe Mounting | Surface mount |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
MSP430F4250IDL 48-pin ssop (dl) Diamant Konfigurasi Panduan
Konfigurasi pin untuk MSP430F4250IDL (48-pin ssop (dl) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk MSP430F4250IDL.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MSP430F4250IDL cocok untuk 6 aplikasis: Portable Temperature Measurement, Industrial Process Monitoring, Battery-Powered Data Logger, Precision Test Instrument, Embedded Panel Meter, Low-Power Sensor Controller.
Portable Temperature Measurement
The MSP430F4250IDL fits portable temperature-measurement instruments because its 16-bit Sigma-Delta ADC acquires low-frequency sensor signals while the 16-bit RISC CPU performs filtering, compensation, and unit conversion. The 1.8 V to 3.6 V operating range supports compact battery-powered designs, while standby current of 1.1 uA and wake-up in less than 6 us limit the energy penalty between measurements. The 256 bytes of RAM and 16 KB of Flash are adequate for focused instrument firmware. Engineers should size the external reference and input network against the ADC specifications, then use the 56-segment LCD driver to present temperature and status without requiring a separate display controller.
Direkomendasikan
Industrial Process Monitoring
The MSP430F4250IDL can serve as the controller in a low-voltage industrial process-monitoring module that must acquire an analog sensor value and report it locally. Its 16-bit Sigma-Delta ADC provides a dedicated measurement channel, while the 12-bit DAC can generate a reference or test signal. The 56-segment LCD driver allows an enclosure-mounted display to show process values without adding a separate display controller. Although the 1.8 V to 3.6 V supply range is suitable for compact embedded modules, designers should isolate field-side inputs, observe EMC requirements, and verify that the ADC input and reference levels remain within their specified operating limits.
Direkomendasikan
Battery-Powered Data Logger
The MSP430F4250IDL is appropriate for a battery-powered data logger that samples sensors intermittently and records or transmits compact measurements. Its five power-saving modes, 1.1 uA standby current, and 0.1 uA off-mode current with RAM retention help reduce consumption during idle periods. Standby wake-up in less than 6 us allows the controller to respond without continuous high-frequency operation. The 16 KB Flash provides space for application code and data, although 256 bytes of RAM requires careful buffering. Designers should use the lowest acceptable clock and supply settings, disable unused peripherals, and confirm the exact LCD, ADC, and communications requirements before finalizing the power budget.
Direkomendasikan
Precision Test Instrument
The MSP430F4250IDL supports a compact precision test instrument that needs measurement, stimulus, and a readable local interface. The 16-bit Sigma-Delta ADC can acquire slow or filtered signals, the 12-bit DAC can create an analog test or reference level, and the 56-segment LCD driver can display the selected channel and result. Its 8 MHz CPU provides deterministic control for instrument sequencing, while five low-power modes help between test operations. The 48-pin SSOP package can support compact boards, but pin multiplexing, analog grounding, and the limited 256 bytes of RAM require disciplined layout and firmware planning.
Direkomendasikan
Embedded Panel Meter
The MSP430F4250IDL is well matched to an embedded panel meter because the 56-segment LCD driver supports local numerical and status indication, while the 16-bit Sigma-Delta ADC handles the measured input. The 12-bit DAC can provide a reference output when the meter must calibrate or drive an external analog section. Operation from 1.8 V to 3.6 V supports low-power panel electronics, and the microcontroller's standby and off-mode figures improve behavior in battery-powered meters. Front-end protection, reference stability, LCD contrast, and button or communication functions should be validated against the application because the 48-pin SSOP requires careful assignment of shared peripheral functions.
Direkomendasikan
Low-Power Sensor Controller
The MSP430F4250IDL works well as a low-power sensor controller because it combines an 8 MHz 16-bit CPU, a dedicated 16-bit Sigma-Delta ADC, and low-power operating modes in one device. Engineers can process a filtered sensor signal locally, display status through the 56-segment LCD driver, and place the controller into standby between samples. Wake-up in less than 6 us reduces response delay, while 256 bytes of RAM makes compact buffering designs possible. The 1.8 V to 3.6 V supply range suits low-voltage systems. Sensor excitation strategy, ADC settling time, reference accuracy, and unused-pin states should be established from the manufacturer electrical specifications before release.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MSP430F4250IDL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MSP430F4250IDLR | MSP430FG4250IDL |
|---|---|---|---|
| Package | 48-pin SSOP (DL) | 48-pin SSOP (DL) | 48-pin SSOP (DL) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB |
| RAM | 256 bytes | 256 bytes | 256 bytes |
| Orderable Form | Tube | Tape and reel | Tube |
Diferensiator Kunci
- Integrated measurement, analog output, and segmented display (vsGeneral-purpose 16-bit MCU alternatives)
- Low-power operation across multiple modes (vsGeneral-purpose 16-bit MCU alternatives)
- Direct order-code flexibility for assembly (vsMSP430F4250IDLR)
Catatan Desain
Use the manufacturer pin-description table for the 48-pin SSOP DL package and verify every analog, LCD, oscillator, programming, power, and ground connection against the schematic. Keep analog inputs and the DAC output away from fast-switching LCD drive traces where practical, and provide a quiet return path for the ADC and supply references.
Design the supply for the complete 1.8 V to 3.6 V operating range rather than a single nominal point. Place local bypass capacitors at the device supply pins with short, low-inductance paths, and confirm external-interface levels to prevent powered signals from exceeding the MCU's input limits. Validate startup, standby, and off-mode behavior in the complete system.
Do not treat the 56-segment LCD driver as a general-purpose parallel display interface, and do not assume that a shared pin can be reassigned without checking its alternate functions. Likewise, confirm ADC settling time, DAC output limits, oscillator configuration, and programming pins in the manufacturer datasheet before committing the PCB or firmware.
The 8 MHz operating point is primarily a performance choice rather than a requirement to run continuously at maximum speed. For low-duty-cycle measurements, clock the processor only while acquiring or processing data and use the documented low-power modes between events. This reduces switching activity and helps avoid unnecessary thermal load in compact, enclosed instruments.
Informasi Konformitas
The listed Texas Instruments product materials do not state a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this order code. AEC-Q100 is not applicable to this general-purpose microcontroller order code.