Texas Instruments

OPA2677U - Dual Wideband Op Amp | Texas Instruments

MPN: OPA2677U ✗ Akhir Hidup
8-pin SOIC Package
MOQ: 1 |

OPA2677U Ringkasan

Texas Instruments OPA2677U is a dual, wideband, high-output-current operational amplifier and DSL/PLC line driver using current-feedback architecture in an 8-pin SOIC package. It provides two amplifier channels in one package and combines high-bandwidth signal amplification with the drive capability required by line-driver and communications circuits. The OPA2677 family is identified by TI as a SpeedPlus dual operational amplifier.

A current-feedback operational amplifier is a voltage-amplifier topology in which the closed-loop bandwidth can remain relatively consistent as closed-loop gain changes. This differs from the voltage-feedback topology commonly used in general-purpose precision amplifiers, where bandwidth and stability trade-offs change more substantially with gain. Current-feedback amplifiers are widely associated with wideband signal conditioning, cable driving, waveform shaping, and communications-interface applications.

The OPA2677U combines two channels, wideband operation, and high output-current capability in an 8-pin SOIC package. Its current-feedback architecture makes it suitable for signal chains that need more bandwidth than ordinary precision op amps can provide. The high-output-current characteristic also makes the device relevant to line-driving tasks where the output must drive a load connected by a cable, transformer, or other lower-impedance interface rather than only provide a high-impedance measurement signal.

Each amplifier channel can be configured according to its feedback network and operating requirements. The device is intended for dual-channel designs where space, component count, and repeatable circuit layout are important. Designers should account for the package footprint, exposed routing requirements, power-supply bypassing, stability network values, and output-current limits when laying out a complete implementation rather than treating the amplifier as a generic eight-pin op amp.

Typical uses include DSL and PLC line-driver interfaces, communications equipment, analog signal-conditioning stages, waveform-generation circuits, video-related signal paths, and industrial control or instrumentation blocks. The wideband current-feedback characteristics are most valuable when the signal has significant high-frequency content or when the application depends on high slew rate and usable bandwidth.

The primary design consideration is confirming the required gain, bandwidth, output swing, load impedance, and supply conditions against the manufacturer datasheet before finalizing external resistor and capacitor values. Feedback components should be placed close to the relevant input pins, and supply decoupling should use the layout recommended in the datasheet. Where the load presents a reactive or capacitive impedance, output isolation or stability components may be needed.

This page combines the exact OPA2677U identity, package, topology, and application classification with practical selection guidance, verified source links, comparison fields, and engineering-focused design notes. It also distinguishes confirmed attributes from parameters that must be obtained from the manufacturer datasheet before a production design is released.

Alternatif penggantian untuk OPA2677U — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian OPA2677U (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Package, Gain-Bandwidth Product.

Texas Instruments
Amplifier Type: Dual voltage-feedback operational amplifier
Gain-Bandwidth Product: 200 MHz
Bandingkan dengan OPA2677U →
Texas Instruments
Amplifier Type: Dual current-feedback operational amplifier
Package: 16-SOIC, PDSO16
Gain-Bandwidth Product: 220 MHz
Bandingkan dengan OPA2677U →

OPA2695IDR

✅ Drop-In
📦 8-pin SOIC
Different wideband current-feedback family; exact output-current difference is

📋 Alternatif referensi (tidak dalam katalog)

OPA2652U

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Dual voltage-feedback operational amplifier · 2 channels · 200 MHz · 5.5 mA per channel · ±5 V · +6 V to +12 V · 140 mA · Classical differential input

Kontak untuk harga

Lihat Datasheet →

OPA2677U Rating Maksimal & Karakteristik Listrik

Amplifier Type Current-feedback operational amplifier
Number of Channels 2 channels
Product Family SpeedPlus dual operational amplifier
Primary Application DSL/PLC line driver
Paket 8-pin SOIC
Tipe Mounting Surface mount
Wideband Operation Wideband
Output Drive Capability High output current
Amplifier Architecture Current feedback

OPA2677U 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk OPA2677U (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk OPA2677U

Tidak ada data diatribut pin yang tersedia untuk OPA2677U.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

OPA2677U cocok untuk 6 aplikasis: DSL Line Driver, PLC Line Interface, Wideband Analog Signal Conditioning, Communications Test Equipment, Video Signal Path, Industrial Control and Instrumentation.

🌐

DSL Line Driver

The OPA2677U is specifically identified by Texas Instruments as a DSL line-driver amplifier, combining a wideband current-feedback architecture with high output-current capability. It can serve as the output stage of a DSL driver when the external gain-setting network, load impedance, and compensation are designed for that topology. The dual package allows separate transmit and receive or two-channel driver functions when the circuit does not require isolation. Before release, verify supply limits, output swing, cable loading, and loop stability against the manufacturer application guidance.

🏭

PLC Line Interface

The OPA2677U's high-output-current wideband characteristics are appropriate for PLC line-interface circuits that drive a defined external load rather than only a high-impedance receiver. Current feedback can provide useful bandwidth behavior across gain settings, while the dual channel can support complementary or separate transmit paths. The design should account for load capacitance, transmission-line effects, required output amplitude, and loop-gain stability. Use the manufacturer's test conditions when comparing the amplifier with lower-drive general-purpose op amps.

📡

Wideband Analog Signal Conditioning

OPA2677U can condition broadband analog signals when a conventional precision voltage-feedback amplifier does not provide sufficient useful bandwidth or slew performance. Its current-feedback topology makes it a practical choice for gain blocks handling substantial high-frequency content, provided the external feedback network is calculated for the selected closed-loop gain. Keep feedback routing compact and observe the recommended supply-bypass arrangement. The final design must verify input and output headroom because wideband behavior does not by itself guarantee adequate signal swing.

🖥️

Communications Test Equipment

The dual wideband OPA2677U can serve in communications test equipment as an output amplifier, signal-conditioning element, or line-interface driver. High output-current capability gives it more authority when driving test fixtures, termination networks, or controlled cable loads than a conventional precision op amp. Two channels can implement a balanced or complementary output arrangement within one 8-pin SOIC package. Engineers should evaluate output stability, capacitive-load tolerance, and settling behavior using the manufacturer characteristic plots before setting the operating gain.

📺

Video Signal Path

OPA2677U's wideband current-feedback architecture can be used in video or other high-speed analog signal paths when the required gain and load characteristics match its operating conditions. The dual configuration supports two amplifier stages or differential-related functions with local routing. Unlike a general-purpose precision amplifier, the part is aimed at bandwidth and drive capability rather than offset-voltage minimization. Confirm video bandwidth, gain accuracy, output impedance, and allowable capacitive loading against the datasheet before using it in production video equipment.

🔧

Industrial Control and Instrumentation

OPA2677U can be evaluated for industrial instrumentation blocks that must amplify signals while also driving a lower-impedance downstream stage. Its dual-channel SOIC implementation reduces board area compared with two separate amplifiers, and the high-output-current capability can simplify drive requirements in selected signal chains. Industrial designs must still satisfy the amplifier's documented supply, temperature, noise, and stability limits. Use local decoupling, short feedback paths, and defined grounding to prevent high-frequency feedback or common-mode conversion from degrading the measured signal.

Ringkasan Produk Direkomendasikan

OPA2695IDR Texas Instruments current-feedback amplifier comparison candidate Digunakan di dalam: DSL Line Driver, Wideband Analog Signal Conditioning, Video Signal Path OPA2652U Texas Instruments Digunakan di dalam: PLC Line Interface, Communications Test Equipment, Industrial Control and Instrumentation
What is the OPA2677U?
The OPA2677U is a dual, wideband, high-output-current current-feedback operational amplifier from Texas Instruments. According to the manufacturer product page, it is a SpeedPlus dual operational amplifier designed for DSL and PLC line-driver applications. The device contains two amplifier channels in an 8-pin SOIC package, making it suitable for wideband analog signal conditioning and communications-interface circuits.
What is the operating voltage of OPA2677U?
The exact OPA2677U operating-voltage range must be confirmed in the Texas Instruments manufacturer datasheet before power-supply or fault-tolerance decisions are made. The device is identified as a dual wideband high-output-current operational amplifier, but the product-page summary does not establish the permissible supply span. Use the datasheet absolute-maximum and recommended-operating sections to define the rail voltage, decoupling capacitors, and startup limits.
What are the key specifications of OPA2677U that engineers should know?
The confirmed headline specifications of the OPA2677U are two amplifier channels, current-feedback architecture, wideband operation, high output-current capability, and an 8-pin SOIC package. Texas Instruments identifies the device as a SpeedPlus dual operational amplifier and DSL/PLC line driver. Its architecture makes it more appropriate than a conventional precision amplifier for broad-band signal paths and communications line-driving functions.
Where can I download the OPA2677U datasheet PDF?
The official OPA2677U technical information is available through the Texas Instruments OPA2677 product page and its manufacturer datasheet resources. The product page is the preferred starting point because it links the current ordering, quality, support, and documentation resources. Use the pin-description table, recommended operating conditions, and typical-application circuits from that datasheet when assigning PCB tracks and selecting external components.
Where can I find the OPA2677U pinout?
The OPA2677U uses an 8-pin SOIC package, but its exact numbered pin functions must be taken from the Texas Instruments pin-description table rather than inferred from a generic SOIC diagram. Follow the manufacturer numbering shown on the package drawing, including the orientation marker, and identify each channel's supply, input, and output pins before laying out the PCB. This prevents channel reversal and incorrect supply connections.
Where to buy OPA2677U online?
Use the Request a Quote form on this page to request OPA2677U availability, current lead time, and ordering information. The form is the appropriate commercial channel for this listing and avoids presenting a stale or mismatched price. Quote requests should include the exact OPA2677U MPN, required quantity, and any reel or cut-tape packaging requirement.
What is the price of OPA2677U?
The current commercial terms for OPA2677U are available through the Request a Quote form on this page. Pricing can vary with quantity, order breaks, packaging, market conditions, and component availability, so a static price figure should not be used for budgeting. Submit the required quantity and purchasing schedule with the quote request for a current response.
What is the lead time for OPA2677U?
The current lead time for OPA2677U should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, scheduled delivery, and component inventory, so it should not be inferred from a catalog status or a distributor search result. Include required quantities and the date by which the components must arrive in the request.
Is OPA2677U in stock?
Current OPA2677U stock status must be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the OPA2677 family, while real-time inventory and order commitments can change independently. A quote response should confirm available quantity, factory lead time, and whether any allocation applies to the requested production quantity.
OPA2677U vs OPA2695IDR - which is better for a wideband application?
Choose the OPA2677U when its documented bandwidth, output-current capability, supply range, and stability characteristics match the exact circuit requirements. The OPA2695IDR is a distinct current-feedback amplifier family and should not be treated as interchangeable without a complete pin and parametric comparison. The manufacturer datasheets should be checked for gain-bandwidth behavior, output drive, output swing, and package pin assignments.
What is the difference between OPA2677U and OPA2652U?
The OPA2677U and OPA2652U are related Texas Instruments current-feedback amplifier options, but they are not automatically interchangeable. The OPA2677 is described as a wideband, high-output-current DSL/PLC line driver, while the OPA2652 belongs to a different amplifier family with its own bandwidth and output-drive characteristics. Confirm pin assignment, supply limits, gain-bandwidth data, and stability requirements before selecting a substitute.
When should I choose OPA2677U over another wideband op amp?
Choose the OPA2677U when the design specifically benefits from two current-feedback channels, wideband operation, high output-current capability, and an 8-pin SOIC implementation. It is particularly relevant to DSL or PLC line-driver circuits and other broad-band communications paths. Select another amplifier when its documented gain-bandwidth behavior, output swing, supply range, noise, or power characteristics are a better match.
Is OPA2677U suitable for DSL and PLC line driving?
Yes. Texas Instruments identifies the OPA2677 as a dual, wideband, high-output-current operational amplifier and DSL/PLC line driver. Its current-feedback architecture and high-output-current capability fit the stated line-driver role. The final circuit still requires verification of supply voltage, allowable output swing, load impedance, loop gain, and stability using the manufacturer application guidance.
What can replace OPA2677U?
A valid replacement for OPA2677U must use the same 8-pin SOIC footprint and provide pin-compatible power, input, and output connections. It must also satisfy the application's bandwidth, gain, slew-rate, output-current, output-swing, noise, and supply requirements. OPA2695IDR and OPA2652U are comparison candidates, but neither should be approved as a drop-in substitute until its manufacturer datasheet confirms complete compatibility.
What is the best Texas Instruments equivalent for OPA2677U?
The closest Texas Instruments equivalent must be selected from a family whose datasheet confirms the same 8-pin SOIC pinout and equivalent current-feedback performance. OPA2695IDR and OPA2652U are useful comparison points, but neither can be called a drop-in replacement without verifying pin functions and key electrical limits. The correct choice depends on bandwidth, output drive, supply range, and application-specific stability requirements.

Data referensi engineering untuk OPA2677U — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose OPA2677U for a dual-channel wideband signal path that benefits from current-feedback operation, high output-current capability, and the manufacturer's DSL/PLC line-driver positioning. It is a strong candidate when both channels require similar broad-band drive behavior and an 8-pin SOIC layout is desirable. Consider OPA2695IDR when its exact gain-bandwidth, supply, output-current, and stability characteristics fit the circuit more closely. Consider OPA2652U when its high-output current-feedback performance is preferable for the intended load. Neither comparison part should be approved without checking its numbered pinout and electrical limits. For production designs, use the OPA2677U when its documented supply range, output swing, bandwidth, and thermal limits satisfy the signal path; otherwise select a device whose manufacturer specifications more directly match the load and gain requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini OPA2695IDR OPA2652U
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Topology Current feedback Current feedback Current feedback
Signal Class Wideband Wideband current-feedback amplifier High-output current-feedback amplifier

Diferensiator Kunci

  • Purpose-built dual DSL/PLC line-driver configuration (vsOPA2695IDR)
  • Wideband operation in a compact dual-channel SOIC (vsOPA2652U)
  • High-output-current amplifier family (vsOPA2695IDR)

Catatan Desain

Place each amplifier's feedback components directly beside its input pins and keep the feedback loop physically small. This is especially important in a current-feedback design because parasitic resistance and capacitance inside the feedback loop can alter gain, stability, and high-frequency behavior. Route supply bypass capacitance close to the SOIC power pins, use a low-inductance ground return, and avoid sharing long copper paths between sensitive input and output nodes.

Do not assume that two current-feedback amplifiers with the same SOIC pin count are automatically interchangeable. Verify the numbered input, output, and supply pins, then compare supply limits, gain-bandwidth behavior, slew rate, output swing, maximum output current, and recommended feedback values for the intended gain. A replacement is production-ready only after those electrical parameters and the target load have been checked with the manufacturer characteristic curves.

Evaluate the complete output network rather than only the amplifier in isolation. Cable capacitance, transformer inductance, termination resistance, and probe capacitance can affect the output stage and closed-loop stability. Start with the load conditions shown in the manufacturer datasheet, and use series isolation resistance or an output network when required. Confirm settling or distortion at the actual signal frequency and amplitude rather than relying only on a small-signal bandwidth figure.

Design the power rails around the amplifier's documented operating range and the voltage drop across the output stage at the required load current. The headline description establishes high output-current capability but does not establish a numerical dissipation limit. Before layout release, calculate worst-case internal dissipation from supply voltage, output voltage, and load current, then verify junction temperature and copper-area requirements using the manufacturer thermal information.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The OPA2677 is an analog operational amplifier and is not an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

Data disahkan pada: 2026-11-09 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

OPA2677U datasheet OPA2677U pinout OPA2677U datasheet pdf OPA2677U equivalent OPA2677U replacement OPA2677U cross reference OPA2677U vs OPA2695IDR OPA2677U vs OPA2652U OPA2677U price OPA2677U stock Texas Instruments OPA2677U OPA2677U 8-SOIC footprint OPA2677U DSL line driver OPA2677U PLC application circuit

Komponen dan Istilah Terkait

Texas Instruments OPA2677U OPA2677 OPA2695IDR OPA2652U Operational Amplifier Dual Amplifier Current-Feedback Amplifier Voltage-Feedback Amplifier High-Speed Amplifier Wideband Amplifier SpeedPlus DSL Line Driver PLC Line Driver Analog Signal Conditioning 8-pin SOIC SOIC Package Surface-Mount Package SMD Gain-Bandwidth Product Slew Rate Output Current Output Voltage Swing Feedback Network Supply Bypass Capacitor
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ