PCM1733U/2K 18-Bit 96kHz Stereo DAC | Texas Instruments
MPN: PCM1733U/2K ✓ AktifPCM1733U/2K Ringkasan
An audio DAC is a converter in the signal-chain hierarchy that transforms digital audio samples into analog voltage signals capable of driving audio amplification or line-level circuitry. The PCM1733 family belongs to the broader category of digital-to-analog converters, which form the output stage between digital audio sources and analog loudspeaker or headphone amplifiers.
Key characteristics include 18-bit resolution, a maximum sampling frequency of 96 kHz, an I2S serial interface, 95 dB dynamic range, and an integrated stereo output amplifier. The internal digital filter supports 8-times oversampling, helping move quantization noise away from the audio passband. A single 5 V supply simplifies analog and digital power planning in conventional consumer and professional audio equipment.
The converter uses a delta-sigma architecture and voltage output. Its digital section communicates through I2S, while the analog section produces left- and right-channel outputs from integrated output amplifiers. This integration reduces the external component count compared with a discrete converter design, although analog-layout discipline remains important because the output is intended for low-noise audio reproduction.
Typical uses include CD and DVD player audio outputs, digital mixing consoles, powered speakers, soundbars, home-theater receivers, and other stereo digital-audio products. The PCM1733U/2K is especially appropriate when an existing design requires an 18-bit converter, 96 kHz operation, and a 14-pin SOIC footprint rather than a high-channel-count multichannel codec.
Use the manufacturer pin-description table when assigning the 14 PCB lands and preserve the recommended analog and digital grounding arrangement. Input and output decoupling capacitors should be placed close to their associated pins, while the I2S data and clock traces should be routed away from the analog output region to reduce coupling.
This product record combines the exact 18-bit, 96 kHz, I2S, 5 V, and 14-SOIC characteristics with package-aware alternatives, comparison parameters, and practical design guidance. It helps engineers identify whether the converter fits an existing audio board before committing to a new PCB layout.
Alternatif penggantian untuk PCM1733U/2K — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PCM1733U/2K (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature Range, Package, Digital Audio Interface, Resolution, Integrated Functions.
PCM1733U/2KG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCM1733U
✅ Drop-InKontak untuk harga
Lihat Datasheet →PCM1733UG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PCM1725DR
✅ Drop-InKontak untuk harga
Lihat Datasheet →PCM1733U/2K Rating Maksimal & Karakteristik Listrik
| Converter Type | Stereo audio digital-to-analog converter |
| Resolusi | 18 bit |
| Maximum Sampling Rate | 96 kHz |
| Digital Audio Interface | I2S |
| Architecture | Delta-sigma |
| Tipe Output | Voltage output |
| Dynamic Range | 95 dB |
| Signal-to-Noise Ratio | 97 dB |
| Tegangan Pemuat | 5 V |
| Oversampling Ratio | 8x |
| Konfigurasi Output | Stereo |
| Jumlah Pin | 14 |
| Paket | 14-SOIC |
| Package Width | 3.90 mm (0.154 inch) |
| Tipe Mounting | Surface mount |
| Rentang Suhu Kerja | -25 °C to +85 °C |
| Integrated Functions | Digital filter and stereo output amplifier |
PCM1733U/2K 3.90 mm (0.154 inch) Diamant Konfigurasi Panduan
Konfigurasi pin untuk PCM1733U/2K (3.90 mm (0.154 inch) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk PCM1733U/2K.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PCM1733U/2K cocok untuk 6 aplikasis: Powered Stereo Speakers, Home-Theater Audio Receiver, CD and DVD Player Output, Digital Audio Mixer, Soundbar Stereo Driver, Digital Soundbar and AV Processor Output.
Powered Stereo Speakers
PCM1733U/2K fits the digital-to-analog stage of a powered speaker that receives stereo I2S audio and drives a line input of a power amplifier. Its 18-bit resolution supports a 96 kHz signal format, while the 8-times oversampling digital filter places quantization noise outside the intended audio passband. The integrated stereo output amplifier reduces the number of external analog stages, and the single 5 V supply simplifies rail planning. Designers should still preserve clean ground separation, place bypass capacitors close to the device, and add the coupling or gain stage required by the following amplifier.
Direkomendasikan
Home-Theater Audio Receiver
The PCM1733U/2K is suitable for a home-theater receiver or surround-sound processor that requires a high-quality stereo conversion path for two channels. It accepts I2S data at up to 96 kHz and provides an 18-bit delta-sigma DAC with integrated output amplification. This arrangement can supply analog line-level signals to a separate power-amplifier stage. The converter's 95 dB listed dynamic range and 97 dB family SNR identify it as a high-fidelity device, but practical channel separation also depends on the balanced grounding and output-routing implementation of the receiver.
Direkomendasikan
CD and DVD Player Output
PCM1733U/2K can serve as the stereo reconstruction stage in a CD or DVD player when the source supplies an I2S digital stream. The device's 96 kHz maximum sampling rate covers standard high-resolution audio use cases, while 18-bit conversion provides more data depth than conventional consumer DACs. Its integrated digital filter and output amplifier reduce the external analog-component count. For low-noise reproduction, the player should use a continuous ground plane without aggressive splits under the converter, short output routes, and the application-circuit capacitor values specified by Texas Instruments.
Direkomendasikan
Digital Audio Mixer
A digital mixer can use PCM1733U/2K to convert a stereo master output into an analog signal for monitoring or line-level distribution. The I2S interface connects to a digital mixer engine, and the 18-bit, 96 kHz converter supports high-resolution stereo workflows. Its voltage outputs and integrated amplifiers can reduce the complexity of a basic analog output card, although mixer designs often need additional gain control and balanced line-driver circuitry. Keeping the DAC analog return current away from switching regulators and digital processor return paths is especially important in a multi-channel mixer enclosure.
Direkomendasikan
Soundbar Stereo Driver
PCM1733U/2K can form part of a soundbar's stereo signal path when the soundbar accepts digital audio over I2S. The converter supports 18-bit operation at up to 96 kHz and uses a single 5 V supply, which fits compact consumer-audio boards. Integrated output circuitry simplifies the path from a digital audio processor to a stereo line input or gain stage. Layout should minimize the distance between the converter, its bypass capacitors, and the analog output coupling components. Digital I2S routing should also remain separated from the stereo output traces to reduce audible data-clock coupling.
Direkomendasikan
Digital Soundbar and AV Processor Output
PCM1733U/2K is appropriate for an AV processor or digital source board that must recreate stereo audio before feeding an external amplifier. The I2S interface supports a direct digital connection, and the 14-SOIC package is convenient for conventional surface-mount assembly. Its 18-bit resolution at 96 kHz provides a clear technical benefit over 16-bit alternatives when the upstream source carries additional resolution. The design must accommodate the converter's single 5 V supply and include appropriate output coupling or amplification, because the integrated stage produces voltage outputs rather than directly driving a loudspeaker.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PCM1733U/2K — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PCM1733U/2KG4 | PCM1733U | PCM1733UG4 | PCM1725DR |
|---|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 16 bit, 11.1% lower than target |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Output Configuration | Stereo | Stereo | Stereo | Stereo | Stereo |
Diferensiator Kunci
- Higher conversion resolution than the 16-bit family alternative (vsPCM1725DR)
- Identical core stereo DAC specifications (vsPCM1733U/2KG4)
- Same package and interface family for PCB reuse (vsPCM1725DR)
- Integrated digital filter and output amplifier (vsPCM1733U)
Catatan Desain
Place the input, output, and bypass capacitors close to their associated PCM1733U/2K pins, following the Texas Instruments application circuit. Keep the stereo output traces short and route them away from the I2S clock and data nets. A continuous ground plane is generally preferable to a split plane, but sensitive analog return currents should not share a high-current path with digital processors, display converters, or switching regulators.
Route the I2S serial data, bit clock, and word clock as a compact, consistently referenced group. Avoid routing these digital signals beneath or directly alongside the stereo analog outputs. Although the PCM1733U/2K provides an 8-times oversampling digital filter and 95 dB listed dynamic range, coupling between digital clock activity and the analog output can still create audible artifacts in high-gain analog stages.
Use a quiet 5 V supply and place the device bypass capacitor at the power pin with a short ground return. If a switching regulator supplies the analog section, separate its high-current output and ground routing from the PCM1733U/2K reference return. Filter any residual supply ripple before it reaches the DAC rather than relying only on the internal oversampling filter to eliminate power-converter noise.
Do not assume that every 14-SOIC stereo DAC is electrically interchangeable. PCM1733U/2KG4 and PCM1733U retain the target's core conversion specifications, whereas PCM1725DR reduces resolution from 18 bits to 16 bits, or 11.1%. Before substitution, verify every numbered pin, I2S clock relationship, output scaling, filter behavior, supply requirements, and the required shipment suffix against the manufacturer datasheet.
Informasi Konformitas
The PCM1733 is an audio converter rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified and therefore remain unknown.