PEX8724-CA80BC - 24-Lane PCIe Gen 3 Switch | Broadcom
MPN: PEX8724-CA80BC ✗ Akhir HidupPEX8724-CA80BC Ringkasan
A PCI Express switch is a semiconductor device that expands a limited collection of PCIe lanes into multiple downstream links. It belongs to the interface-controller hierarchy, specifically the PCI Express interface IC and PCIe switch class. Rather than acting as a simple signal buffer, the switch manages lane routing, port configuration, address translation, window mapping, and power-state coordination across connected endpoints.
The PEX8724's principal specifications include 24 PCIe lanes, six ports, PCI Express Gen 3 operation, and integrated 8.0 GT/s SerDes. Manufacturer material also identifies configurable link width, non-transparent bridging, address translation, window mapping, plug-and-play behavior, and power-on state management as principal features. These capabilities support flexible fabric layouts where endpoints require independent logical paths while sharing an upstream host interface.
Its 324-ball FCBGA construction supports dense high-speed interconnect requirements and provides the necessary electrical and physical scale for a 24-lane switching device. Unlike a conventional bridge limited to a single downstream hierarchy, this switch can fan out traffic among multiple ports. The product overview identifies server, storage, communications, and graphics platforms as representative deployment environments.
Typical applications include PCIe expansion enclosures, multi-host server backplanes, storage controllers, external processing systems, high-speed network appliances, and graphics or accelerator systems. In each case, the switch can provide lane bifurcation and independent port routing, provided the board design follows Broadcom's reference layout, power-delivery requirements, signal-integrity rules, and firmware configuration procedures.
A successful implementation must account for the complexity of a high-lane-count PCIe switch. Differential pairs require controlled impedance, low-loss routing, reference-plane continuity, and appropriate connector or package escape geometry. Power delivery must support the device across operating states while minimizing switching and high-frequency noise that could affect neighboring circuitry.
This product overview combines the manufacturer's PCIe switch capabilities with package, interface, and application information to support early design decisions. It also identifies where application-specific lane mapping, thermal analysis, firmware configuration, and board-layout validation are required before production deployment.
Alternatif penggantian untuk PEX8724-CA80BC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
PEX8724-CA80BC G
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PEX8724-CA80BC Rating Maksimal & Karakteristik Listrik
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 3 |
| Total PCIe Lanes | 24 lanes |
| Port Count | 6 ports |
| SerDes Data Rate | 8.0 GT/s per lane |
| Paket | 324-ball FCBGA (19 x 19 mm) |
| Tipe Mounting | Surface mount |
| Link Width | Configurable |
| Bridging Mode | Non-transparent bridging |
| Address Translation | Supported |
| Window Mapping | Supported |
| Power-On State Management | Supported |
| Plug-and-Play Operation | Supported |
| Power Consumption | Low-power consumption |
| Status RoHS | Compliant |
PEX8724-CA80BC 324-ball fcbga (19 x 19 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk PEX8724-CA80BC (324-ball fcbga (19 x 19 mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk PEX8724-CA80BC.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PEX8724-CA80BC cocok untuk 6 aplikasis: PCIe Server Backplane Expansion, Multi-Host Storage Connectivity, Communications Equipment Expansion, Graphics and Accelerator Systems, External PCIe Processing Enclosure, Industrial PCIe Control Platform.
PCIe Server Backplane Expansion
The PEX8724-CA80BC fits a server backplane that must expand one host interface into multiple downstream PCIe paths. Its 24 lanes can be configured to support a multi-port topology, while the six-port fabric provides more connection points than a single bridge. The device supports non-transparent bridging, address translation, and window mapping, which help maintain distinct logical address spaces across separate endpoint domains. A production design must follow the manufacturer reference layout, provide clean 8.0 GT/s SerDes routing, and confirm lane allocation in firmware before board release.
Direkomendasikan
Multi-Host Storage Connectivity
The PEX8724-CA80BC is appropriate for storage systems that need controlled PCIe fan-out toward multiple controllers or accelerator endpoints. Its 24-lane capacity and six-port architecture provide a flexible basis for a non-blocking interconnect, while address translation and window mapping support access across independently managed PCI Express hierarchies. The implementation should partition lanes and ports deliberately, maintain continuous high-speed reference planes, and validate each path for the required Gen 3 signal integrity and power-state behavior.
Direkomendasikan
Communications Equipment Expansion
The PEX8724-CA80BC can support communications equipment that needs several PCIe endpoints behind a common host or fabric controller. Its configurable link width allows system architects to match lane resources to endpoint requirements, and plug-and-play operation simplifies enumeration in complex equipment. Signal-integrity work is critical because every 8.0 GT/s SerDes lane requires controlled impedance, low-loss routing, and adequate return-path continuity. Power sequencing and thermal design should be completed together because a six-port configuration can create demanding simultaneous activity conditions.
Direkomendasikan
Graphics and Accelerator Systems
The PEX8724-CA80BC suits graphics, compute, and accelerator systems that require multiple PCIe endpoints to communicate through a high-bandwidth switch. Twenty-four lanes provide a substantial transport budget, while six ports enable a meaningful expansion topology rather than a point-to-point bridge. The device's non-transparent bridging and address-translation features are useful when connected endpoints require isolation between logical address domains. Board planning must include package escape geometry, connector reach, thermal paths, and channel validation for sustained high-throughput traffic.
Direkomendasikan
External PCIe Processing Enclosure
The PEX8724-CA80BC is suitable for an external processing enclosure in which one system controller must reach multiple PCIe-capable modules. The six-port fabric provides room for several downstream links, while configurable lane widths help adapt the topology to modules with different throughput requirements. Because the device is packaged in a dense 324-ball FCBGA, the host board needs carefully controlled escape routing and a manufacturing process compatible with the manufacturer's land pattern and reflow requirements.
Direkomendasikan
Industrial PCIe Control Platform
The PEX8724-CA80BC can serve in an industrial control platform that connects multiple PCIe endpoint cards to a host processor while preserving a structured PCIe topology. Its address translation, window mapping, and power-on state management support deterministic configuration of the downstream domains. Industrial implementations must account for temperature, vibration, sustained data activity, and serviceability requirements. Confirm operating limits, power sequencing, and thermal performance with the official documentation before selecting capacitors, cooling, and enclosure airflow.
Direkomendasikan
Data referensi engineering untuk PEX8724-CA80BC — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Catatan Desain
Route all 8.0 GT/s SerDes pairs as controlled-impedance differential signals with uninterrupted reference planes. Follow the Broadcom reference layout for 324-ball FCBGA escape paths, layer transitions, return vias, and endpoint connections. Avoid stubs and test-point structures that create discontinuities, and perform channel simulation that includes connector, via, and package effects before fabrication.
Design the core and auxiliary supplies from the device's official power table rather than from generic FCBGA guidance. Verify startup sequencing, voltage tolerance, decoupling placement, and worst-case demand across link-width, port-state, and traffic-activity combinations. Keep high-current switching loops compact and isolate noisy supply paths from sensitive SerDes reference planes to reduce coupling into the PCIe links.
Use the manufacturer land pattern and thermal design because the 324-ball FCBGA relies on its board footprint and copper for heat removal. Estimate dissipation from the documented operating modes and provide copper spreading beneath the package, appropriate via arrays, and enclosure airflow. Validate the hottest expected junction condition rather than relying only on ambient temperature at the board surface.
Do not treat the PEX8725-CA80BC as a drop-in replacement merely because both devices are 24-lane Gen 3 switches. The PEX8725 has 10 ports compared with 6 on the PEX8724, and equivalent ball assignments, power rails, and firmware behavior are not established. Require a package-level and configuration-level review before any substitution or footprint reuse.
Informasi Konformitas
RoHS compliance is identified in the available PEX8724-CA80BC product listing. No explicit automotive qualification or additional material-compliance declarations were found for this exact ordering code.