PEX8725-CA80BC - PCIe Gen 3 Switch | Broadcom
MPN: PEX8725-CA80BC ✓ AktifPEX8725-CA80BC Ringkasan
A PCI Express switch is a semiconductor device that connects a host or upstream PCIe endpoint to multiple downstream endpoints. It belongs to the interface-controller hierarchy, where PCIe fabric switching sits above serial interface controllers and below complete computer and networking architectures. By distributing traffic across independently configurable links, such a switch expands endpoint capacity without requiring each endpoint to connect directly to the host complex.
The PEX8725 family supports the PCI Express Base Specification Revision 3.0 and is compatible with earlier PCI Express generations. The manufacturer product brief also identifies compliance with Revision 1.2 of the PCI Power Management Specification and Microsoft Vista compatibility. Dynamic link-width control and dynamic SerDes speed control allow link behavior to adapt to system requirements, while access control services support controlled access to PCIe resources.
For high-throughput server and switch-fabric applications, the PEX8725 architecture supports packet cut-through with a maximum latency of 132 ns for an x8-to-x8 transfer. Its non-blocking internal switch architecture, large packet memory, and flexible common buffer and flow-control credit pool are designed to sustain full line rate on all ports when the configuration and system conditions support that operating mode.
Typical uses include server storage controllers, PCIe expansion systems, accelerator backplanes, network-interface aggregation, and other equipment requiring multiple PCIe endpoints behind one upstream interface. Configuration flexibility allows ports to be assigned lane widths and traffic direction dynamically, making the family suitable for systems that need scalable bandwidth rather than a fixed two-port arrangement.
PCB implementation requires careful high-speed signal-integrity work because a 19 x 19 mm FCBGA places power, ground, and high-speed differential contacts on a dense ball-grid footprint. The board stack-up, reference-plane continuity, decoupling network, connector or package escapes, and length matching should be developed together with the device reference design. Thermal planning is also essential because a complex switch IC can dissipate substantial power under sustained full-width traffic.
This product record combines the manufacturer family documentation with distributor package and configuration information. It also provides practical application guidance, replacement-selection criteria, and parameter comparisons intended to clarify where the PEX8725 fits in a PCIe switching design.
Alternatif penggantian untuk PEX8725-CA80BC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifPEX8725-CA80BC Rating Maksimal & Karakteristik Listrik
| Product Type | PCI Express Gen 3 switch IC |
| PCIe Generation | Gen 3 |
| Total Lane Configuration | 24 lanes |
| Port Count | 10 ports |
| Supported Lane Widths | x1, x2, x4, x8, and x16 |
| Upstream Port Assignment | Any port; dynamically changeable |
| Maximum Packet Cut-Through Latency | 132 ns for x8-to-x8 transfer |
| Paket | 324-ball FCBGA, 19 x 19 mm |
| Terminal Count | 324 terminals |
| Package Type | Square ball-grid array |
| Technology | CMOS |
| PCI Express Base Specification | Revision 3.0; compatible with Revision 1.0a, 1.1, and 2.0 |
| PCI Power Management Specification | Revision 1.2 |
| Operating System Compatibility | Microsoft Vista compliant |
| Downstream Traffic Support | Flexible buffer allocation and packet flow control |
| Link Management | Dynamic link-width control and dynamic SerDes speed control |
| Read Control | performancePAK Read Pacing |
| Access Control | Access Control Services supported |
| Tipe Mounting | Surface mount |
PEX8725-CA80BC square ball-grid array Diamant Konfigurasi Panduan
Konfigurasi pin untuk PEX8725-CA80BC (square ball-grid array pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk PEX8725-CA80BC.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PEX8725-CA80BC cocok untuk 6 aplikasis: PCIe Storage Controller Aggregation, Network Interface Aggregation, PCIe Accelerator Backplane, PCIe Expansion Backplane, Instrumentation and Test Systems, Embedded Compute Platform.
PCIe Storage Controller Aggregation
The PEX8725-CA80BC fits server and workstation designs that must expose several PCIe storage controllers through a compact fabric. Its 24-lane, 10-port family configuration supports x1 through x16 widths, allowing controllers with different bandwidth requirements to share one upstream connection. The 132 ns maximum x8-to-x8 cut-through latency is useful when transaction latency matters, while flexible buffer allocation and packet flow control help accommodate traffic dominated by downstream transfers. Board designers should use the manufacturer reference stack-up and escape geometry for the 324-ball FCBGA.
Network Interface Aggregation
The PEX8725-CA80BC is suitable for systems that connect multiple PCIe network controllers, security processors, or fabric adapters through one upstream host interface. With 10 configurable ports and support for x1, x2, x4, x8, and x16 links, the device can match adapter bandwidth without forcing every endpoint onto a fixed-width interface. Dynamic SerDes speed control can accommodate devices operating at different negotiated speeds. A successful implementation requires validated reference-clock distribution, lane polarity mapping, reset sequencing, and firmware topology configuration from the Broadcom design package.
PCIe Accelerator Backplane
The PEX8725-CA80BC can support accelerator and coprocessor backplanes that require several downstream devices behind a host complex. The family architecture is especially relevant when most traffic moves from the host toward compute, storage, or I/O endpoints rather than returning upstream. Configurable port widths support mixed accelerator populations, and the low cut-through path helps reduce switch-added delay. The design must preserve continuous reference planes and differential-pair geometry across the 19 x 19 mm FCBGA, connector escape region, and any carrier or mezzanine board.
PCIe Expansion Backplane
The PEX8725-CA80BC fits expansion systems that need more downstream ports than a host chipset can directly provide. Ten configurable ports allow a design to combine narrow auxiliary links with wide high-bandwidth links, while dynamic upstream-port designation supports selectable fabric arrangements. This flexibility helps when the enclosure needs both control traffic and data traffic across the same switch family. Engineers should budget for PCIe connector launch, loss-management components, reference-clock distribution, and complete power-delivery design rather than treating the IC as a conventional point-to-point interface device.
Instrumentation and Test Systems
The PEX8725-CA80BC can organize PCIe-based measurement engines, digitizers, or FPGA-linked peripherals behind a common host interface. The configurable x1-to-x16 links allow slow control endpoints and wide data-capture endpoints to coexist, while the 132 ns maximum x8-to-x8 packet cut-through latency supports latency-sensitive command and data movement. For laboratory equipment, deterministic behavior still depends on proper reference-clock isolation, device-driver latency, DMA design, and the ability of each endpoint to sustain its negotiated PCIe rate.
Embedded Compute Platform
The PEX8725-CA80BC is applicable to embedded compute platforms that need modular PCIe expansion for storage, networking, and accelerator functions. Its 10-port family architecture permits multiple downstream devices while the 24-lane budget constrains the maximum aggregate topology. Dynamic link-width control helps adapt the fabric to varying device capabilities, and flexible packet-flow control supports the downstream-heavy traffic patterns common in clustered storage and data-processing systems. Integration requires careful power sequencing and thermal management for the dense switching silicon.
Data referensi engineering untuk PEX8725-CA80BC — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Catatan Desain
Use the manufacturer-controlled stack-up, ball map, and reference escape geometry for the 324-ball FCBGA. Preserve uninterrupted reference planes beneath the switch, minimize layer transitions for high-speed differential pairs, and apply the documented length and via-transition rules. Confirm connector and package escape requirements before fixing the board layer count; otherwise PCIe eye margin, crosstalk, and insertion-loss performance can degrade even when the logic design is correct.
Design the complete core and auxiliary supply network from the official electrical tables, including required bulk and high-frequency decoupling, sequencing, ramp limits, and fault behavior. Place the high-frequency capacitors directly across the applicable package power-and-ground ball pairs and keep their connection paths short. Validate the distribution network for simultaneous switching current and the worst sustained traffic pattern, because an apparently adequate average current can still create unacceptable local voltage droop.
Estimate worst-case dissipation from the maximum supported link configuration and sustained traffic rather than from an idle state. Estimated: total dissipation equals the sum of core, auxiliary, serializer, and I/O power at the selected operating condition. Compare that result with the package thermal limits and available PCB copper, then model the spreading path into the board. Dense adjacent components can raise the junction temperature even when the board has adequate copper area elsewhere.
Do not treat PEX8725 family marketing data as proof that any orderable suffix is interchangeable with PEX8725-CA80BC. PCIe switches also depend on exact ball assignments, supply rails, reset behavior, reference clocks, firmware, and topology configuration. Obtain the controlled package and electrical files for the exact ordering code, and complete a firmware and signal-integrity validation before approving a supposedly equivalent part.
Informasi Konformitas
The family documentation identifies PCI Express and PCI Power Management specification compliance, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration for the exact ordering code was found.