Microchip Technology

PIC16C67T-10/L - 8-Bit 10MHz OTP MCU 14KB | Microchip PLCC-44

MPN: PIC16C67T-10/L ✓ Aktif

4.5 V to 5.5 V Vdss 44-pin PLCC (J-Lead), 16.59 x 16.59 mm Package 10 MHz Speed OTP (One-Time Programmable) Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

PIC16C67T-10/L Ringkasan

The Microchip Technology PIC16C67T-10/L is a member of the PIC® 16C family of 8-bit CMOS microcontrollers, offering a 10 MHz core speed with 14 KB (8K x 14) of One-Time Programmable (OTP) program memory and 368 bytes of RAM, housed in a 44-pin PLCC (J-lead) surface-mount package. It operates from a 4.5 V to 5.5 V supply rail (with a broader 4 V to 6 V tolerance per distributor data) and exposes 33 I/O pins for external interfacing.

An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripheral set on one silicon die. Within the system taxonomy, the PIC16C67 sits below 16-bit and 32-bit MCUs but above simple 8-bit controllers in raw throughput. The PIC16C series uses a RISC-style 35-instruction set, where most instructions execute in a single 200 ns cycle at 20 MHz clock input, making code density high and developer ramp-up shallow. The OTP sub-family allows one-time-only programming - cheaper than flash, suitable for mature production where firmware revisions are unnecessary.

Key features of the PIC16C67T-10/L include integrated communication peripherals (I2C, SPI, and UART/USART), on-chip Brown-out Detect/Reset, Power-On Reset (POR), Pulse Width Modulation (PWM), and a Watchdog Timer (WDT). The 33 I/O ports support direct interfacing with sensors, displays, and actuator drivers, reducing external component count. The 10 MHz clock input rating at 4.5 V–5.5 V (vs. the 20 MHz -10 part) maps directly to applications where EMI-sensitive or lower-power operation is acceptable in exchange for a wider timing margin.

Architecturally, the device uses Harvard-bus design with separate program and data paths, allowing instruction fetch and operand access to occur in the same instruction cycle. The 14-bit-wide instruction word (compared to 12-bit for the baseline PIC) yields more efficient encoding of immediate values and jump targets. This generation predates PIC18 and PIC24/dsPIC; code compatibility stops at PIC16F/PIC16C with the same 14-bit core.

Typical applications include industrial control logic nodes, appliance control boards, automotive body-electronics modules (subject to AEC-Q100 evaluation), and embedded instrumentation. The PLCC-44 socketed form factor suits legacy designs and easy field replacement. When designing with this part, note that OTP memory cannot be erased; engineering samples must be windowed CERDIP variants (PIC16C67-10/L not -JW), and production programming must use a gang programmer such as MPLAB PM3.

Alternatif penggantian untuk PIC16C67T-10/L — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC16C67T-10/L (sama faktor bentuk dan footprint) — berbeda di dalam Package, Program Memory Type, Core Architecture, Mounting Type, Program Memory Size.

PIC16C67-10/L

Microchip Technology

Package: 44-pin PLCC (PLCC-44, LCC-44, J-Lead)

Program Memory Type: OTP (One-Time Programmable) ROM

Core Architecture: 8-bit PIC RISC (Harvard)

PIC16C67-20/L

Microchip Technology

Package: 44-PLCC (16.59 x 16.59 mm)

Program Memory Type: OTP (One-Time-Programmable)

Program Memory Size: 14KB (8K x 14)

PIC16C67-20I/L

Microchip Technology

Package: 44-pin PLCC (J-lead)

Program Memory Type: OTP (One-Time-Programmable) EPROM

Core Architecture: PIC 8-bit RISC

PIC16C67T-20/L

Microchip Technology

Package: PLCC-44 (16.59 x 16.59 mm)

Program Memory Type: OTP (One-Time-Programmable)

Mounting Type: Surface Mount (J-lead)

PIC16C67T-20/L

✅ Drop-In

Microchip Technology

📦 44-pin PLCC (J-Lead)

PIC16 8-bit RISC · OTP (One-Time-Programmable) · 14 KB (8K x 14) · 368 bytes · Not present on this part · 20 MHz · 200 ns (at 20 MHz) · 33

Kontak untuk harga

Lihat Datasheet →

PIC16C67-10/L

✅ Drop-In

Microchip Technology

📦 44-pin PLCC (J-Lead)

8-bit PIC RISC (Harvard) · PIC16C6X (PIC16CXX mid-range) · OTP (One-Time Programmable) ROM · 14 KB (8K x 14) · 368 bytes · 10 MHz · 200 ns · 35 single-word instructions

Kontak untuk harga

Lihat Datasheet →

PIC16C67T-10I/L

✅ Drop-In

📦 44-pin PLCC (J-Lead)

same 44-pin PLCC and 10 MHz rating, industrial -40C to +85C vs commercial 0C to +70C

📋 Alternatif referensi (tidak dalam katalog)

PIC16C67T-20I/L

✅ Drop-In

📦 44-pin PLCC (J-Lead)

same 44-pin PLCC, 20 MHz vs 10 MHz (+100% throughput), industrial -40C to +85C vs commercial

📋 Alternatif referensi (tidak dalam katalog)

PIC16C67-20I/L

✅ Drop-In

Microchip Technology

📦 44-pin PLCC (J-Lead)

PIC 8-bit RISC · OTP (One-Time-Programmable) EPROM · 14 KB (8K x 14) · 368 bytes · 20 MHz · 200 ns · 35 instructions · 4.5 V to 5.5 V

Kontak untuk harga

Lihat Datasheet →

PIC16C67-20/L

✅ Drop-In

Microchip Technology

📦 44-pin PLCC (J-Lead)

Microchip Technology · PIC® 16C · 8-bit RISC · 8-bit · OTP (One-Time-Programmable) · 14KB (8K x 14) · 368 x 8 bytes · 20 MHz

Kontak untuk harga

Lihat Datasheet →

PIC16C67T-10/L Rating Maksimal & Karakteristik Listrik

Core Architecture	8-bit PIC 16C (14-bit instruction word)
Clock Speed (Maximum)	10 MHz
Program Memory Type	OTP (One-Time Programmable)
Program Memory Size	14 KB (8K x 14)
RAM Size	368 bytes
I/O Pins	33
Paket	44-pin PLCC (J-Lead), 16.59 x 16.59 mm
Supply Voltage (Nominal Range)	4.5 V to 5.5 V
Supply Voltage (Extended Tolerance)	4.0 V to 6.0 V
Rentang Suhu Kerja	0 °C to +70 °C
Tipe Mounting	Surface Mount
Communication Interfaces	I2C, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, Watchdog Timer (WDT)
Instruction Set	35 instructions, single-cycle (200 ns at 20 MHz)

Konfigurasi Pin PIC16C67T-10/L

Pin produk 1	RA0/AN0 — PORTA bit 0 / Analog input 0
Pin produk 2	RA1/AN1 — PORTA bit 1 / Analog input 1
Pin produk 3	RA2/AN2 — PORTA bit 2 / Analog input 2
Pin produk 4	RA3/AN3/VREF+ — PORTA bit 3 / Analog input 3 / ADC reference
Pin produk 5	RA4/T0CKI — PORTA bit 4 / Timer 0 clock input
Pin produk 6	RA5/SS/AN4 — PORTA bit 5 / SPI slave select / Analog input 4
Pin produk 7	RE0/RD/AN5 — PORTE bit 0 / Read control / Analog input 5
Pin produk 8	RE1/WR/AN6 — PORTE bit 1 / Write control / Analog input 6
Pin produk 9	RE2/CS/AN7 — PORTE bit 2 / Chip select / Analog input 7
Pin produk 10	OSC1/CLKIN — Oscillator input / external clock
Pin produk 11	OSC2/CLKOUT — Oscillator output
Pin produk 12	RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / clock input
Pin produk 13	RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2
Pin produk 14	RC2/CCP1 — PORTC bit 2 / Capture-Compare-PWM1
Pin produk 15	RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock
Pin produk 16	RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data
Pin produk 17	RC5/SDO — PORTC bit 5 / SPI data out
Pin produk 18	RC6/TX/CK — PORTC bit 6 / UART TX / clock
Pin produk 19	RC7/RX/DT — PORTC bit 7 / UART RX / data
Pin produk 20	VSS — Ground
Pin produk 21	RD0/PSP0 — PORTD bit 0 / Parallel Slave Port
Pin produk 22	RD1/PSP1 — PORTD bit 1
Pin produk 23	RD2/PSP2 — PORTD bit 2
Pin produk 24	RD3/PSP3 — PORTD bit 3
Pin produk 25	RD4/PSP4 — PORTD bit 4
Pin produk 26	RD5/PSP5 — PORTD bit 5
Pin produk 27	RD6/PSP6 — PORTD bit 6
Pin produk 28	RD7/PSP7 — PORTD bit 7
Pin produk 29	RB0/INT — PORTB bit 0 / External interrupt
Pin produk 30	RB1 — PORTB bit 1
Pin produk 31	RB2 — PORTB bit 2
Pin produk 32	RB3 — PORTB bit 3
Pin produk 33	RB4 — PORTB bit 4
Pin produk 34	RB5 — PORTB bit 5
Pin produk 35	RB6/PGC — PORTB bit 6 / ICSP clock
Pin produk 36	RB7/PGD — PORTB bit 7 / ICSP data
Pin produk 37	VDD — Positive supply (5 V)
Pin produk 38	VDD — Positive supply (5 V) - second pin
Pin produk 39	VSS — Ground - second pin
Pin produk 40	MCLR/VPP — Master clear reset / Programming voltage
Pin produk 41	NC — Not connected
Pin produk 42	NC — Not connected
Pin produk 43	NC — Not connected
Pin produk 44	NC — Not connected

Aplikasi Umum

PIC16C67T-10/L cocok untuk 6 aplikasis: Industrial Control Logic Nodes, Appliance Control Boards, Automotive Body Electronics Modules, Embedded Instrumentation and Data Loggers, Legacy Replacement and Field Service, Educational and Development Platforms.

🏭

Industrial Control Logic Nodes

The PIC16C67T-10/L fits industrial control logic nodes because its 33 I/O pins, 14 KB OTP program memory, and integrated peripherals (PWM, WDT, Brown-out Reset) cover most discrete control tasks in one chip. With 10 MHz core speed and 400 ns instruction cycles, it executes ladder-logic-equivalent state machines with ample timing margin at industrial 5 V rails. The OTP memory enforces production firmware stability - critical for safety-of-function nodes where field reprogramming is undesirable.

Direkomendasikan

PIC16C67T-20/L · Microchip Technology PIC16C67T-10I/L (Industrial -40C to +85C variant for harsher environments)

🏭

Appliance Control Boards

The PIC16C67T-10/L is a strong fit for appliance control boards (washers, dryers, dishwashers) where its 5 V operating range, 33 I/O lines, and PWM output directly drive relays, triacs, valve solenoids, and LED/LCD displays. The 14 KB OTP holds complex user-interface state machines, while the on-chip WDT and Brown-out Detect protect against motor-induced supply dips. The PLCC-44 socketed package simplifies service and field replacement in long-life appliances.

Direkomendasikan

PIC16C66T-10/SO · Microchip Technology PIC16C67-10/L · Microchip Technology

🚗

Automotive Body Electronics Modules

The PIC16C67T-10/L is used in non-safety automotive body-electronics modules (interior lighting, seat controllers, mirror adjusters) where its 4.5 V to 5.5 V supply tolerates 12 V battery transients after regulation. The integrated UART/USART and SPI connect to body-network gateways. For under-hood or AEC-Q100 required applications, the commercial 0 C to 70 C temperature grade is insufficient - select PIC16C67T-10I/L (industrial) or migrate to a PIC18/dsPIC AEC-Q100 part.

Direkomendasikan

PIC16C67T-10I/L (Industrial -40C to +85C variant for cabin modules) PIC16C67T-20/L · Microchip Technology

🔧

Embedded Instrumentation and Data Loggers

The PIC16C67T-10/L supports embedded instrumentation and slow-speed data loggers because its 14 KB OTP, 368-byte RAM, UART/USART, and I2C peripheral set connect directly to sensors and EEPROM/FRAM storage. The 10 MHz clock and single-cycle 35-instruction RISC core efficiently runs acquisition loops at sub-kHz rates. OTP enforces that the calibration coefficients burned at production are never overwritten in the field.

Direkomendasikan

PIC16C67T-20/L · Microchip Technology PIC16C66T-10/SO · Microchip Technology

🔧

Legacy Replacement and Field Service

The PIC16C67T-10/L serves legacy replacement and field-service roles where 44-pin PLCC sockets are already installed in long-lifecycle equipment. Its drop-in compatibility with PIC16C67-10/L, PIC16C67-20/L, and PIC16C67T-20/L allows service technicians to substitute with speed-grade or carrier variants without PCB rework. The OTP memory also makes it attractive as a counterfeit-resistant alternative to flash parts - genuine PIC16C67 cannot be reprogrammed with malicious code.

Direkomendasikan

PIC16C67-10/L · Microchip Technology PIC16C67-20/L · Microchip Technology

📺

Educational and Development Platforms

The PIC16C67T-10/L is a useful educational platform for embedded-systems curricula that teach 8-bit MCU fundamentals, OTP programming economics, and legacy PLCC soldering techniques. The 35-instruction RISC architecture is small enough for full mastery in one semester, while the 33 I/O pins and PWM/ADC/WDT peripheral set provide enough complexity for non-trivial labs. Microchip MPLAB PM3 and PICSTART Plus programmers natively support this device for classroom lab use.

Direkomendasikan

PIC16C67T-20/L · Microchip Technology PIC16C66T-10/SO · Microchip Technology

Ringkasan Produk Direkomendasikan

PIC16C67T-20/L Microchip Technology Digunakan di dalam: Industrial Control Logic Nodes, Automotive Body Electronics Modules, Embedded Instrumentation and Data Loggers, Educational and Development Platforms PIC16C67T-10I/L Industrial -40C to +85C variant for harsher environments Digunakan di dalam: Industrial Control Logic Nodes, Automotive Body Electronics Modules PIC16C66T-10/SO Microchip Technology Digunakan di dalam: Appliance Control Boards, Embedded Instrumentation and Data Loggers, Educational and Development Platforms PIC16C67-10/L Microchip Technology Digunakan di dalam: Appliance Control Boards, Legacy Replacement and Field Service PIC16C67-20/L Microchip Technology Digunakan di dalam: Legacy Replacement and Field Service

What is the program memory size of PIC16C67T-10/L?

The PIC16C67T-10/L has 14 KB of One-Time Programmable (OTP) program memory, organized as 8K x 14 instructions. According to Microchip PIC16C67 family specifications, this memory can be written only once and cannot be electrically erased, so production programming must be the final firmware image. For prototyping, use a windowed CERDIP PIC16C67-10/JW variant that allows UV erasure.

What is the maximum clock frequency of PIC16C67T-10/L?

The PIC16C67T-10/L is rated for a maximum 10 MHz clock input at 4.5 V to 5.5 V supply. The 'T-10' speed suffix designates the 10 MHz grade; the higher PIC16C67T-20 variant supports 20 MHz at the same voltage. At 10 MHz, each instruction cycle is 400 ns; program branches take two cycles (800 ns).

What is the difference between PIC16C67T-10/L and PIC16C67-10/L?

The PIC16C67T-10/L is supplied in Tape and Reel packaging optimized for SMT assembly, while the PIC16C67-10/L is supplied in Tube packaging for through-hole or hand-placement assembly. Both share identical silicon die, 10 MHz rating, 14 KB OTP, and 44-pin PLCC package, making them functionally interchangeable - the only difference is the shipping carrier.

What package does PIC16C67T-10/L use?

The PIC16C67T-10/L uses a 44-pin PLCC (Plastic Leaded Chip Carrier) with J-leads, measuring 16.59 mm x 16.59 mm. This surface-mount socketed package supports easy field replacement and is compatible with standard PLCC-44 sockets and programming adapters.

Where to buy PIC16C67T-10/L online?

The PIC16C67T-10/L is available from authorized distributors including DigiKey (DigiKey part 320649), Microchip Direct, Mouser, and Hotenda. As of 2026-09-18, distributor listings show active stock at single-unit pricing around $7.85 USD. Lead time for large-quantity orders is typically 4-8 weeks due to OTP-programming production flow.

What is the lead time for PIC16C67T-10/L?

The PIC16C67T-10/L lead time is typically 4-8 weeks when ordered through Microchip Direct or authorized distributors as of 2026-09-18. Because this is an OTP part, factory programming can extend lead time if you order pre-programmed units. Distributors like DigiKey often stock blank units for immediate shipment at small quantities.

Is PIC16C67T-10/L in stock at DigiKey?

Yes, DigiKey lists the PIC16C67T-10/L with active stock status as of 2026-09-18, under part number 320649-ND. Pricing begins at approximately $7.85 USD for single units, with volume discounts down to $5.40 USD at 1000-piece quantities. Same-day shipping is offered for orders placed before the cutoff.

PIC16C67T-10/L vs PIC16C67T-20/L - which is better for high-speed control?

The PIC16C67T-20/L is the better choice for high-speed control applications. It runs at 20 MHz with 200 ns instruction cycles versus the 10 MHz/400 ns cycles of the PIC16C67T-10/L. Both share the same 44-pin PLCC package and 14 KB OTP memory, making them drop-in compatible on the PCB - simply substitute the MPN suffix from -10 to -20 to double the throughput.

When should I choose PIC16C67T-10/L over PIC16F877A-I/P?

Choose PIC16C67T-10/L when your design needs low-cost one-time programmable memory for a fixed, mature firmware image and your BOM is already 44-pin PLCC-based. Choose PIC16F877A-I/P when you need flash memory for in-system reprogramming, ICD debugging support, or 40-pin DIP compatibility. Both parts share the same 14-bit PIC16 core instruction set.

What is the best drop-in replacement for PIC16C67T-10/L?

The best drop-in replacement is PIC16C67T-20/L from Microchip, sharing identical 44-pin PLCC package, 14 KB OTP, 368-byte RAM, and pinout. The only difference is 20 MHz max clock vs. 10 MHz, which is a transparent upgrade for most designs. Both parts can also be substituted by PIC16C67-10/L and PIC16C67-20/L in tube packaging respectively.

Where to download PIC16C67T-10/L datasheet PDF?

The official PIC16C67T-10/L datasheet PDF is available from the Microchip product page at https://www.microchip.com/en-us/product/PIC16C67. Authorized distributors like DigiKey and Mouser also host PDF mirrors on their product pages (e.g., DigiKey part 320649). The datasheet contains full electrical specifications, AC/DC timing diagrams, and programming reference for the IC module category.

Where to find PIC16C67T-10/L pinout?

The PIC16C67T-10/L pinout is documented on page 1 of the Microchip PIC16C67 datasheet and includes pin assignments for the 44-pin PLCC package: pins 1-12 and 28-39 carry PORTA-PORTE I/O, pins 13-14 are OSC1/OSC2, pin 20 is VSS, pin 32 is VDD, and pins 40-44 carry the ICSP programming signals. A visual diagram is also rendered on the XAIPART product page.

Is PIC16C67T-10/L suitable for new product designs?

The PIC16C67T-10/L is suitable for new designs where OTP memory is acceptable and the 44-pin PLCC footprint is desired. However, for new designs requiring in-system firmware updates, ICD debugging, or modern peripherals, consider PIC16F877A-I/P (flash, DIP-40) or PIC16F887-I/PT (flash, TQFP-44) instead. The PIC16C family remains active for long-lifecycle industrial products.

What Microchip programmer is compatible with PIC16C67T-10/L?

The PIC16C67T-10/L is compatible with Microchip MPLAB PM3 Universal Device Programmer and the PICSTART Plus programmer. For development with ICD (In-Circuit Debugging), note that OTP parts cannot be debugged in-circuit - you must use a windowed CERDIP PIC16C67-10/JW sample for code bring-up, then program the production OTP units with the final firmware image.

What is the operating temperature range of PIC16C67T-10/L?

The PIC16C67T-10/L operates from 0 °C to +70 °C ambient temperature, designated as the commercial operating range. The 'I' suffix variants (e.g., PIC16C67T-10I/L) extend this to industrial -40 °C to +85 °C. For automotive -40 °C to +125 °C operation, look for AEC-Q100 qualified PIC18 or dsPIC alternatives, as the PIC16C67 family is not AEC-Q100 qualified.

What is the difference between PIC16C67T-10/L and PIC16C66T-10/L?

The PIC16C67T-10/L has 14 KB OTP program memory, 368 bytes RAM, and 33 I/O pins in 44-pin PLCC, while the PIC16C66T-10/L has 8 KB OTP, 368 bytes RAM, and 22 I/O pins in 28-pin SOIC. Both share the same 14-bit PIC16 core and 10 MHz rating. They are not pin-compatible drop-in replacements due to different packages and pin counts.

Data referensi engineering untuk PIC16C67T-10/L — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PIC16C67T-10/L when your design is built around a 44-pin PLCC socket, requires 14 KB of stable one-time-programmable memory at a 10 MHz clock rate, and targets commercial-temperature (0 C to +70 C) environments. Upgrade to PIC16C67T-20/L for higher throughput at the same cost, or to PIC16C67T-10I/L for industrial -40 C to +85 C operation. Migrate to PIC16F877A-I/P (flash, DIP-40) or PIC16F887-I/PT (flash, TQFP-44) when in-system reprogrammability, ICD debugging, or modern peripherals are required. The PIC16C67 family is best suited for long-lifecycle industrial, appliance, and legacy-replacement applications where OTP enforcement prevents field firmware tampering.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	PIC16C67T-20/L	PIC16C67-10/L	PIC16C67T-10I/L	PIC16C67T-20I/L	PIC16C67-20I/L	PIC16C67-20/L
Package	44-pin PLCC (J-Lead), T&R	44-pin PLCC (J-Lead), T&R - same	44-pin PLCC (J-Lead), Tube - same	44-pin PLCC (J-Lead), T&R - same	44-pin PLCC (J-Lead), T&R - same	44-pin PLCC (J-Lead), Tube - same	44-pin PLCC (J-Lead), Tube - same
Brand	Microchip Technology	Microchip Technology - same	Microchip Technology - same	Microchip Technology - same	Microchip Technology - same	Microchip Technology - same	Microchip Technology - same
Maximum Clock Speed	10 MHz	20 MHz (+100%)	10 MHz (identical)	10 MHz (identical)	20 MHz (+100%)	20 MHz (+100%)	20 MHz (+100%)
Program Memory	14 KB OTP (8K x 14)	14 KB OTP (identical)	14 KB OTP (identical)	14 KB OTP (identical)	14 KB OTP (identical)	14 KB OTP (identical)	14 KB OTP (identical)
RAM Size	368 bytes	368 bytes (identical)	368 bytes (identical)	368 bytes (identical)	368 bytes (identical)	368 bytes (identical)	368 bytes (identical)
Operating Temperature	0 C to +70 C (commercial)	0 C to +70 C (commercial)	0 C to +70 C (commercial)	-40 C to +85 C (industrial)	-40 C to +85 C (industrial)	-40 C to +85 C (industrial)	0 C to +70 C (commercial)
Carrier	Tape and Reel	Tape and Reel	Tube	Tape and Reel	Tape and Reel	Tube	Tube
Supply Voltage	4.5 V to 5.5 V (4-6 V tolerance)	4.5 V to 5.5 V (identical)	4.5 V to 5.5 V (identical)	4.5 V to 5.5 V (identical)	4.5 V to 5.5 V (identical)	4.5 V to 5.5 V (identical)	4.5 V to 5.5 V (identical)
I/O Pins	33	33 (identical)	33 (identical)	33 (identical)	33 (identical)	33 (identical)	33 (identical)

Diferensiator Kunci

Transparent 2x throughput upgrade available in same socket (vsPIC16C67T-20/L)
Industrial temperature variant in identical package (vsPIC16C67T-10I/L)
Same silicon available in Tube carrier for hand assembly (vsPIC16C67-10/L)

Catatan Desain

The PIC16C67T-10/L operates from 4.5 V to 5.5 V nominal with a broader 4 V to 6 V tolerance window. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin (pins 37 and 38) and a single 10 uF bulk capacitor near the package. The PIC16C67 has two VDD and two VSS pins - both must be connected for proper POR operation. Use a watchdog timer (WDT) enabled in software to recover from supply-brownout conditions in industrial environments.

OTP program memory cannot be electrically erased - once programmed, the PIC16C67T-10/L is committed permanently. For development and debugging, use a windowed CERDIP PIC16C67-10/JW sample that allows UV erasure, then burn production firmware into the PLCC OTP parts only after code is finalized. If you accidentally program incorrect firmware into an OTP unit, the part is scrap - this is the key trade-off versus flash-based PIC16F equivalents.

The 44-pin PLCC (J-lead) package is socketed and field-replaceable. Use a quality PLCC-44 surface-mount socket (e.g., 3M 8444-21B1-RK or equivalent) when designing service-friendly boards. Reserve a clear keep-out area around the package for socket insertion/extraction tools. The PLCC outline is significantly larger than the equivalent TQFP-44 footprint - if board area is critical, consider migrating to PIC16F887-I/PT in TQFP-44.

Informasi Konformitas

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Qualified

Bebas Logam Lengket

Unknown

Bebas Halogena

Unknown

Mineral Konflik

Unknown

Compliance status not explicitly stated in verified web data; consult Microchip product page or factory certificate of compliance for current RoHS/REACH/lead-free status. PIC16C67 family is not AEC-Q100 qualified - select automotive-grade PIC18 or dsPIC parts for AEC-Q100 applications.

Data disahkan pada: 2026-09-18 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Distributor, Distributor, Manufacturer Product Page, Manufacturer Datasheet

Pencarian Terkait

PIC16C67T-10/L PIC16C67T-10/L datasheet Microchip PIC16C67T-10/L PIC16C67 10MHz 14KB OTP PLCC-44 44-pin PLCC PIC16C6x microcontroller PIC16C67T-10/L industrial control application PIC16C67T-10/L vs PIC16C67T-20/L PIC16C67T-10/L drop-in replacement buy PIC16C67T-10/L tape and reel PIC16C67T-10/L pinout PLCC-44 8-bit OTP MCU 44-pin PLCC 5V PIC16C67T-10/L lead time distributor

Komponen dan Istilah Terkait

Microchip Technology PIC16C67T-10/L PIC16C67T-20/L PIC16C67-10/L PIC16C67T-10I/L PIC16C67T-20I/L PIC16C67-20I/L PIC16C67-20/L PIC16C66T-10/SO PIC PIC16C 8-bit microcontroller MCU OTP One-Time Programmable PLCC-44 J-Lead I2C SPI UART/USART PWM Watchdog Timer Brown-out Reset RISC MPLAB PM3