PIC16F15376-E/PT - 32MHz 28KB Flash 8-bit MCU | Microchip
MPN: PIC16F15376-E/PT ✓ AktifPIC16F15376-E/PT Ringkasan
An 8-bit PIC microcontroller is a compact, deterministic processor built around a Harvard-architecture RISC core optimized for low-power, real-time control. PIC microcontrollers belong to the microcontroller -> embedded processor -> semiconductor device hierarchy. The XLP variant adds nanoWatt sleep modes and peripheral modules that can operate while the CPU is halted, making the family well-suited for battery-powered sensor nodes and IoT endpoints.
Key features of this part include 4 PWM channels, a comparator, a 5-bit DAC, a 10-bit ADC, a Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART peripherals, and SPI/I2C communication interfaces. The device operates from 2.3V to 5.5V and supports eXtreme Low-Power modes with currents as low as nanoampere levels in deep sleep.
The PIC16F15376 uses a RISC-based PIC16 core with a 14-bit instruction word and an internal 32MHz oscillator block with PLL, providing deterministic instruction execution and a wide peripheral set. Hardware-based CIPs offload timing-critical tasks from the CPU, allowing complex functions like waveform generation and signal conditioning to run autonomously.
Typical applications include low-power IoT nodes, sensor interfaces, LED lighting control, consumer electronics, industrial control, and battery-powered monitoring. The 44-pin TQFP package provides ample I/O for system integration while remaining compact for space-constrained designs.
When designing with this part, note the -E temperature grade of -40C to +125C suitable for industrial environments. Use the MPLAB X IDE with XC8 compiler for firmware development, and consider the PIC16F15376-I/PT (-40C to +85C) variant for commercial temperature ranges.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, enabling faster BOM decisions and second-source validation for production engineers.
Alternatif penggantian untuk PIC16F15376-E/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16F15376-E/PT (sama faktor bentuk dan footprint) — berbeda di dalam Comparators, ADC, Package, DAC, Operating Temperature.
PIC16F15376-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F15375-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F15376-E/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC 8-bit RISC |
| Program Memory (Flash) | 28 KB (16K x 14 words) |
| RAM | 2 KB (2048 bytes) |
| Data EEPROM | 0 bytes (none) |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V |
| Paket | 44-TQFP (PT) 10x10 mm |
| Jumlah Pin | 44 pins |
| PWM Channels | 4 |
| 10-bit ADC | Yes |
| Comparators | Yes |
| 5-bit DAC | Yes |
| Complementary Waveform Generator (CWG) | Yes |
| Configurable Logic Cells (CLC) | 4 |
| EUSART | 2 |
| SPI / I2C | Yes / Yes |
| Temperature Grade (E suffix) | -40C to +125C (Industrial) |
| XLP (eXtreme Low-Power) | Yes |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin PIC16F15376-E/PT
| Pin produk 1 | RA1 — I/O port A bit 1 |
| Pin produk 2 | RA2 — I/O port A bit 2 |
| Pin produk 3 | RA3 — I/O port A bit 3 |
| Pin produk 4 | RA4 — I/O port A bit 4 |
| Pin produk 5 | RA5 — I/O port A bit 5 |
| Pin produk 6 | RA6 — I/O port A bit 6 |
| Pin produk 7 | RA7 — I/O port A bit 7 |
| Pin produk 8 | VSS — Ground |
| Pin produk 9 | RA0 — I/O port A bit 0 |
| Pin produk 10 | OSC1 — External oscillator input |
| Pin produk 11 | OSC2 — External oscillator output |
| Pin produk 12 | RC0 — I/O port C bit 0 |
| Pin produk 13 | RC1 — I/O port C bit 1 |
| Pin produk 14 | RC2 — I/O port C bit 2 |
| Pin produk 15 | RC3 — I/O port C bit 3 |
| Pin produk 16 | RC4 — I/O port C bit 4 |
| Pin produk 17 | RC5 — I/O port C bit 5 |
| Pin produk 18 | RC6 — I/O port C bit 6 |
| Pin produk 19 | RC7 — I/O port C bit 7 |
| Pin produk 20 | VSS — Ground |
| Pin produk 21 | RB0 — I/O port B bit 0 |
| Pin produk 22 | RB1 — I/O port B bit 1 |
| Pin produk 23 | RB2 — I/O port B bit 2 |
| Pin produk 24 | RB3 — I/O port B bit 3 |
| Pin produk 25 | RB4 — I/O port B bit 4 |
| Pin produk 26 | RB5 — I/O port B bit 5 |
| Pin produk 27 | RB6 — I/O port B bit 6 |
| Pin produk 28 | RB7 — I/O port B bit 7 |
| Pin produk 29 | VSS — Ground |
| Pin produk 30 | VDD — Positive supply |
| Pin produk 31 | RD0 — I/O port D bit 0 |
| Pin produk 32 | RD1 — I/O port D bit 1 |
| Pin produk 33 | RD2 — I/O port D bit 2 |
| Pin produk 34 | RD3 — I/O port D bit 3 |
| Pin produk 35 | RD4 — I/O port D bit 4 |
| Pin produk 36 | RD5 — I/O port D bit 5 |
| Pin produk 37 | RD6 — I/O port D bit 6 |
| Pin produk 38 | RD7 — I/O port D bit 7 |
| Pin produk 39 | VSS — Ground |
| Pin produk 40 | RE0 — I/O port E bit 0 |
| Pin produk 41 | RE1 — I/O port E bit 1 |
| Pin produk 42 | RE2 — I/O port E bit 2 |
| Pin produk 43 | RE3 — I/O port E bit 3 |
| Pin produk 44 | VDD — Positive supply |
Aplikasi Umum
PIC16F15376-E/PT cocok untuk 6 aplikasis: Battery-Powered IoT Sensor Node, LED Lighting and Color Control, Industrial Control and HMI, Consumer Appliance Control, Automotive Body Electronics, Medical Monitoring Devices.
Battery-Powered IoT Sensor Node
The PIC16F15376-E/PT's XLP nanoWatt sleep modes and 2.3V-5.5V operating range make it ideal for battery-powered IoT sensor nodes. Its 28 KB Flash supports lightweight MQTT-SN or LoRaWAN stacks, while 4 CLC cells implement wake-on-signal logic without CPU intervention. Typical quiescent current in deep sleep is in the nanoampere range, enabling multi-year coin-cell operation for environmental sensors.
Direkomendasikan
LED Lighting and Color Control
With 4 PWM channels and a Complementary Waveform Generator (CWG), the PIC16F15376-E/PT can drive multi-channel LED strings with hardware-generated complementary waveforms, leaving the CPU free for color-mixing algorithms. The 10-bit ADC enables ambient light sensing, and the CLC cells can implement blanking logic to prevent shoot-through in high-current LED drivers.
Direkomendasikan
Industrial Control and HMI
The PIC16F15376-E/PT operates from -40C to +125C with 32 MHz deterministic execution, making it suitable for industrial control panels and small HMIs. Its 2 EUSART peripherals support RS-485 Modbus, the SPI/I2C interfaces drive displays and EEPROM, and 36 usable I/O pins handle keypad scanning and relay control without external I/O expanders.
Direkomendasikan
Consumer Appliance Control
The PIC16F15376-E/PT's integrated peripherals - 4 PWMs, comparators, 10-bit ADC, and 5-bit DAC - eliminate the need for many external analog components in small kitchen and home appliances. The 32 MHz core drives user interfaces with capacitive touch via the CLC cells, while XLP modes extend battery life in portable appliances like cordless vacuums or handheld mixers.
Direkomendasikan
Automotive Body Electronics
For non-safety automotive body modules such as lighting controllers, mirror adjusters, or seat controllers, the PIC16F15376-E/PT provides the wide temperature range and robust peripheral set. CIPs like the CWG and PWM handle motor commutation without CPU load, and 2 EUSARTs support LIN bus via external transceivers, with operating voltage compatible with 12V battery rails via a 5V regulator.
Direkomendasikan
Medical Monitoring Devices
Deterministic 8-bit execution and CIP peripherals make the PIC16F15376-E/PT a fit for low-end medical monitoring peripherals such as pill dispensers, spirometer flow sensors, or therapy device controllers. The integrated 10-bit ADC acquires sensor data while the CLC cells pre-process signals in hardware, and XLP modes keep battery replacement intervals long for portable patient-worn devices.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16F15376-E/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16F15376-I/PT | PIC16F15375-I/PT |
|---|---|---|---|
| Package | 44-TQFP (PT) 10x10 mm | 44-TQFP (PT) 10x10 mm - same | 44-TQFP (PT) 10x10 mm - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same |
| Program Memory (Flash) | 28 KB | 28 KB | 14 KB (-50%) |
| RAM | 2 KB | 2 KB | 2 KB |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) |
| PWM Channels | 4 | 4 | 4 |
| EUSART / I2C / SPI | 2 / 1 / 1 | 2 / 1 / 1 | 2 / 1 / 1 |
| CLC Cells | 4 | 4 | 4 |
Diferensiator Kunci
- 28 KB Flash in 44-TQFP (vsPIC16F15375-I/PT)
- Industrial -40C to +125C temperature grade (vsPIC16F15376-I/PT)
- 4 CLC cells for hardware logic (vsPIC16F15356-E/SO)
Catatan Desain
The PIC16F15376-E/PT supports XLP nanoWatt sleep modes; configure unused peripherals via the PMD (Peripheral Module Disable) registers to minimize active current. Place a 100 nF decoupling capacitor close to each VDD pin (pins 30 and 44) and a bulk 10 uF tantalum or ceramic capacitor at the supply input. Use the internal 32 MHz HFINTOSC with PLL to eliminate the external crystal and reduce BOM cost.
The 44-TQFP package has 0.8 mm pitch pads; use 0.4 mm-wide traces with 0.2 mm spacing. Fan out the inner pads (RB0-RB7) on both sides of the package to avoid via congestion. Expose a continuous ground plane under the IC to improve thermal dissipation and EMI performance. Keep the ICSP/ICD programming header (PGED2/PGEC2 on RB6/RB7) accessible for in-circuit debug.
The PIC16F15376 has NO Data EEPROM (0 bytes); use Flash self-erase with wear-leveling if persistent parameter storage is required. The CONFIG words must be set correctly to enable the internal oscillator and disable unused peripherals - leaving the default configuration enables the external oscillator which may not be populated. The -E temperature grade is for industrial use; the -I grade is only specified to +85C and may fail in automotive environments.
Informasi Konformitas
RoHS and lead-free confirmed by Microchip product page. AEC-Q100 not qualified - this is an industrial-grade part, not automotive. Halogen-free status not explicitly listed in the verified web data.