PIC16F527-I/P - 8-Bit 20MHz Flash MCU w/ ADC & Dual Op-Amps
MPN: PIC16F527-I/P ✓ AktifPIC16F527-I/P Ringkasan
An 8-bit microcontroller (MCU) is a single-chip computer containing a CPU, program memory, data memory, and integrated peripherals. Within the embedded hierarchy, MCUs sit between fixed-function logic ICs and full microprocessors (MPUs): PIC16 MCUs are Microchip's baseline 14-bit instruction word family, optimized for cost-sensitive analog-rich applications, and the PIC16F527 specifically targets sensor conditioning and closed-loop control with on-chip analog front-end building blocks.
Key features include 17 general-purpose I/O pins, an 8 MHz internal oscillator with PLL option, nanoWatt power management, an integrated 8-bit ADC with 8 input channels, two rail-to-rail op-amps, two comparators with hysteresis, and an 8 x 8 hardware multiplier. The wide 2.0V to 5.5V operating voltage supports both 3.3V and 5V systems.
Typical applications include sensor signal conditioning, battery chargers, LED lighting control, small motor control, power supply monitoring, and low-cost consumer appliance controllers. The integrated op-amps and comparators eliminate the need for external analog ICs in transducer interface designs.
When designing with this device, ensure decoupling capacitors (100 nF + 10 uF) are placed within 5 mm of VDD/AVDD pins. The internal oscillator accuracy is typically +/- 2% over voltage and temperature, so time-critical protocols may require an external crystal.
Alternatif penggantian untuk PIC16F527-I/P — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16F527-I/P (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Core Architecture, I/O Pins, Internal Oscillator.
PIC16F527-I/SS
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC16F527-I/SO
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC16F527T-I/SS
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F526-I/P
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F505-I/P
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F527-E/P
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F527-I/P Rating Maksimal & Karakteristik Listrik
| Core Architecture | PIC16 (enhanced 14-bit RISC) |
| Lebar Bus Data | 8-bit |
| Program Memory (Flash) | 1.5 KB (1K x 14) |
| RAM | 68 bytes |
| EEPROM | 64 bytes |
| Max CPU Speed | 20 MHz (200 ns instruction cycle) |
| Operating Voltage (VDD) | 2.0 V to 5.5 V |
| I/O Pins | 17 |
| ADC | 8-bit, 8 channels |
| Operational Amplifiers | 2 (on-chip) |
| Comparators | 2 |
| Internal Oscillator | 8 MHz (with PLL to 32 MHz) |
| Timers | 3 (8-bit Timer0/Timer2 + 16-bit Timer1) |
| Paket | 20-pin PDIP (P) |
| Tipe Mounting | Through-Hole |
| Operating Temperature (Industrial) | -40 C to +85 C |
| Status RoHS | Compliant |
Konfigurasi Pin PIC16F527-I/P
| Pin produk 1 | RA5/T1CKI/OSC1/CLKIN — GPIO RA5 / Timer1 clock input / oscillator input |
| Pin produk 2 | RA4/T1G/OSC2/CLKOUT — GPIO RA4 / Timer1 gate / oscillator output |
| Pin produk 3 | RA3/MCLR/VPP — GPIO RA3 / Master Clear (reset) / programming voltage |
| Pin produk 4 | RC5 — GPIO RC5 |
| Pin produk 5 | RC4 — GPIO RC4 |
| Pin produk 6 | RC3 — GPIO RC3 |
| Pin produk 7 | RC2 — GPIO RC2 |
| Pin produk 8 | RC1 — GPIO RC1 |
| Pin produk 9 | RC0 — GPIO RC0 |
| Pin produk 10 | RB7 — GPIO RB7 |
| Pin produk 11 | RB6 — GPIO RB6 |
| Pin produk 12 | RB5 — GPIO RB5 |
| Pin produk 13 | RB4 — GPIO RB4 |
| Pin produk 14 | RB3 — GPIO RB3 |
| Pin produk 15 | RB2 — GPIO RB2 |
| Pin produk 16 | RB1 — GPIO RB1 |
| Pin produk 17 | RB0 — GPIO RB0 / ICSPDAT |
| Pin produk 18 | VDD — Positive supply voltage |
| Pin produk 19 | VSS — Ground |
| Pin produk 20 | RA0 — GPIO RA0 |
Aplikasi Umum
PIC16F527-I/P cocok untuk 7 aplikasis: Sensor Signal Conditioning, Battery Chargers, LED Lighting Control, Small Motor Control (Brushed DC), Power Supply Monitoring, Consumer Appliance Controllers, Industrial Sensor Interfaces.
Sensor Signal Conditioning
The PIC16F527-I/P is ideal for sensor signal conditioning because it integrates two on-chip rail-to-rail operational amplifiers and two comparators alongside the 8-bit ADC in a single 20-pin PDIP package. Engineers can connect a bridge sensor or thermistor directly to the input pins and use the integrated op-amps for first-stage amplification without external analog ICs. The 20 MHz CPU executes the linearization and temperature compensation algorithm in real time, while the 1.5 KB Flash holds the calibration lookup table. Compared to a discrete op-amp + MCU solution, this integration reduces BOM count by 2-3 components and shrinks PCB area by approximately 30%.
Direkomendasikan
Battery Chargers
The PIC16F527-I/P fits battery charger designs where its 2.0V-5.5V operating range, integrated ADC, and dual comparators monitor cell voltage and current without external analog components. The 8-bit ADC samples Vbat and Icharge at sufficient rates for CC-CV charge profiles, while the comparators trigger over-voltage and over-current protection interrupts to the CPU. The 1.5 KB Flash supports CC-CV state machines and battery chemistry profiles (Li-Ion, NiMH, lead-acid). The PDIP-20 package suits through-hole charger modules for hobbyist and industrial markets where hand-assembly and field replacement are common.
Direkomendasikan
LED Lighting Control
The PIC16F527-I/P drives LED lighting systems using its PWM-capable Timer0/Timer2 peripherals and integrated analog for current sensing. The op-amps condition the current-sense resistor signal while the ADC reads thermistor input for thermal foldback protection. At 20 MHz the MCU generates smooth multi-channel PWM dimming without flicker, and the 8 MHz internal oscillator saves a crystal in cost-sensitive fixtures. The wide 2.0V-5.5V VDD accepts direct power from 3.3V or 5V supplies used in architectural and decorative LED installations. The 64-byte EEPROM stores brightness presets and color mixing curves across power cycles.
Direkomendasikan
Small Motor Control (Brushed DC)
The PIC16F527-I/P controls small brushed DC motors via PWM on Timer2 with closed-loop current feedback using the integrated op-amps and ADC. The 20 MHz CPU handles back-EMF sensing and PID control loops at update rates suitable for fans, pumps, and small appliances. The two comparators detect stall conditions and over-current events for hardware-level protection independent of firmware execution. The PDIP-20 package is breadboard-friendly for prototyping motor-control firmware before committing to surface-mount designs. With 1.5 KB Flash the MCU fits complete speed-control and soft-start algorithms.
Direkomendasikan
Power Supply Monitoring
The PIC16F527-I/P monitors multi-rail power supplies using its 8-channel ADC to measure Vout, Iout, and temperature while the integrated comparators trigger fault flags for over-voltage and under-voltage conditions. The 200 ns instruction cycle allows fast response to transient events, and the nanoWatt sleep modes reduce quiescent current to under 1 uA for always-on supervisor functions. The 64-byte EEPROM logs fault history and trim settings. The PDIP-20 package suits 1U server PSUs and ATX peripheral monitoring boards where through-hole assembly remains preferred for serviceability.
Direkomendasikan
Consumer Appliance Controllers
The PIC16F527-I/P serves as a low-cost controller in small consumer appliances such as coffee makers, irons, and kitchen timers where integrated analog reduces the BOM. The two op-amps interface directly to NTC temperature sensors and current-sense resistors, the comparators detect zero-crossing of AC mains for triac timing, and the 8-bit ADC reads user potentiometer inputs. The 1.5 KB Flash holds appliance state machines with EEPROM-backed user preferences. The wide 2.0V-5.5V VDD range tolerates unregulated wall-adapter supplies. The PDIP-20 package suits hand-assembled appliance boards and simplifies field service replacement.
Direkomendasikan
Industrial Sensor Interfaces
The PIC16F527-I/P operates in industrial 4-20 mA loop-powered sensor transmitters where its 2.0V-5.5V range starts up at low loop currents and its integrated op-amps condition the sensor signal before ADC sampling. The two comparators detect loop-current faults and cable-break conditions for diagnostics. The industrial -40C to +85C operating range covers outdoor and cabinet-mounted installations. With 1.5 KB Flash the MCU fits linearization, scaling, and HART-like protocol encoding. The 20-pin PDIP package simplifies through-hole industrial module assembly and supports conformal coating processes.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16F527-I/P — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16F527-I/SS | PIC16F527-I/SO | PIC16F527-E/P | PIC16F526-I/P | PIC16F505-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-20 | SSOP-20 | SOIC-20 | PDIP-20 | PDIP-20 | PDIP-20 |
| Flash Memory | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB | 1.5 KB |
| RAM | 68 bytes | 68 bytes | 68 bytes | 68 bytes | 67 bytes | 72 bytes |
| On-chip Op-Amps | 2 | 2 | 2 | 2 | 0 | 0 |
| Comparators | 2 | 2 | 2 | 2 | 2 | 0 |
| ADC Resolution | 8-bit, 8 channels | 8-bit, 8 channels | 8-bit, 8 channels | 8-bit, 8 channels | 8-bit, 8 channels | 8-bit, 8 channels |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C |
Diferensiator Kunci
- Integrated dual op-amps and dual comparators eliminate 2-3 external analog ICs (vsPIC16F505-I/P)
- SSOP-20 surface-mount variant available with identical silicon (vsPIC16F527-I/SS)
- Extended temperature variant available for harsh environments (vsPIC16F527-E/P)
Catatan Desain
Place a 100 nF ceramic decoupling capacitor within 5 mm of the VDD pin (pin 18) and a 10 uF bulk capacitor near the VSS pin (pin 19). If using the AVDD separate analog supply, decouple it with an additional 100 nF + 10 uF pair. The integrated op-amps draw additional supply current (typically 0.5 mA per amplifier at 5V), so size the bulk capacitor to handle the combined digital + analog inrush during ADC sampling. In battery applications, the nanoWatt sleep mode drops quiescent current below 1 uA when the MCU is idle.
Keep analog input traces short and routed away from digital switching signals (PWM outputs, oscillator pins). Use a ground plane split under the analog section if noise is observed; otherwise a single uninterrupted ground plane works for 8-bit ADC resolution. Place the ICSP header (ICSPCLK on RB6, ICSPDAT on RB7) at the board edge with 0.1 inch pin spacing for PICkit compatibility. The MCLR pin (RA3/MCLR/VPP, pin 3) requires a 10 kohm pull-up to VDD for normal operation; add a 100 nF capacitor in series if using ICSP to allow the debugger to drive reset.
The internal oscillator is factory-calibrated to +/- 2% at 5V/25C but can drift +/- 5% across the full -40C to +85C industrial range and +/- 10% at 2.0V VDD. Do not use the internal oscillator for UART baud-rate generation or any timing-critical protocol without verifying margin across temperature and voltage corners. For time-sensitive applications, add an external crystal on OSC1/OSC2 (pins 1-2). Configuration word bits must be set correctly: enable the internal oscillator, disable the watchdog timer if not used, and select the BOR voltage threshold appropriate for your VDD rail.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per the device material declaration. Not AEC-Q100 qualified; choose PIC16F527-E/P for extended temperature or contact Microchip for automotive-grade variants.
