PIC16LC74BT-04I/L - 8-bit 4MHz MCU 7KB OTP 44-PLCC | Microchip
MPN: PIC16LC74BT-04I/L ✗ Akhir HidupPIC16LC74BT-04I/L Ringkasan
A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data memory, and peripheral interfaces on one die. Within the broader taxonomy, the PIC16LC74B belongs to the Mid-Range PIC16 architecture (14-bit instruction word, RISC core) which sits between the Base-Line PIC10/PIC12/PIC16C5x family and the Enhanced Mid-Range PIC16F1xxx family. The PIC16LC74B is a power-management-conscious derivative using a low-voltage CMOS process, and ultimately falls under the 8-bit MCU category within embedded microcontrollers and semiconductor ICs.
Key features of the PIC16LC74BT-04I/L include a Harvard-architecture 8-bit RISC core with a 14-bit instruction set, built-in peripherals such as Brown-out Detect/Reset, Power-on Reset (POR), Pulse-Width Modulation (PWM) outputs, and a Watchdog Timer (WDT). The device also integrates analog and digital resources, including an 8-bit ADC, multiple timers (5 x 8-bit plus 1 x 16-bit), and a 5 x 8-bit structure that maps I/O, timer, and interrupt resources. Connectivity is provided by one I2C/SPI interface and one UART/USART channel, supporting common industrial networking protocols.
The device utilizes Microchip's standard OTP EPROM-based program memory, which is mask-programmed during manufacturing and cannot be erased electrically. This makes the PIC16LC74BT-04I/L a production-targeted part for designs where the firmware is stable, cost-sensitive, and high-volume. The "T" suffix indicates a tape-and-reel packaging option, while "/L" specifies the leadless 44-PLCC surface-mount package with J-bend terminations.
Typical applications include industrial control panels, appliance controllers, automotive sub-system modules, sensor signal conditioning, and low-power embedded products where the 2.5V minimum supply enables direct battery or 3.3V-rail operation. The wide temperature range makes the part suitable for HVAC, factory automation, and outdoor instrumentation.
A key design consideration is the trade-off between OTP memory (no in-field updates) and Flash-based siblings such as PIC16F74. Engineers targeting a stable, low-cost, high-volume product should select the OTP "C" variant, but should prototype using the PIC16F74 Flash version to allow firmware iteration. Designers should also note the 33 I/O pin budget against the 44-pin PLCC assignments and ensure proper decoupling on VDD/AVDD/VDDCORE pins.
This page synthesizes distributor pricing, drop-in alternative options from the same PIC16C family, and practical design notes not consolidated in any single manufacturer document.
Alternatif penggantian untuk PIC16LC74BT-04I/L — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16LC74BT-04I/L (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Operating Temperature Range, Program Memory Size, Program Memory Type, Instruction Cycle Time.
PIC16C74B-04I/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16C74B-04/L
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16LC74B-04I/L
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC16LC74B-04I/P
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC16C74A-04I/L
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC16LC74AT-04I/L
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC16LC74BT-04I/L Rating Maksimal & Karakteristik Listrik
| Core | 8-bit PIC RISC (Mid-Range PIC16, 14-bit instruction word) |
| Program Memory Type | OTP (One-Time-Programmable EPROM) |
| Program Memory Size | 7 KB (4K x 14) |
| RAM | 192 bytes |
| Frekuensi Bawah Maximum | 4 MHz |
| Operating Voltage Range | 2.5 V to 5.5 V |
| Rentang Suhu Kerja | -40 C to +85 C (Industrial) |
| Number of I/O Pins | 33 |
| Package Type | 44-pin PLCC (16.59 x 16.59 mm, J-bend) |
| ADC | 8-bit, 8 channels |
| Timers | 5 x 8-bit + 1 x 16-bit |
| Connectivity | I2C, SPI, UART/USART |
| Integrated Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Tipe Mounting | Surface Mount |
Konfigurasi Pin PIC16LC74BT-04I/L
| Pin produk 1 | MCLR/VPP — Master Clear (reset) input / programming voltage |
| Pin produk 2 | RA0/AN0 — PORTA bit 0 / analog input channel 0 |
| Pin produk 3 | RA1/AN1 — PORTA bit 1 / analog input channel 1 |
| Pin produk 4 | RA2/AN2 — PORTA bit 2 / analog input channel 2 |
| Pin produk 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog channel 3 / ADC reference positive |
| Pin produk 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pin produk 7 | RA5/AN4/SS — PORTA bit 5 / analog channel 4 / SPI slave select |
| Pin produk 8 | RE0/RD/AN5 — PORTE bit 0 / parallel port read / analog channel 5 |
| Pin produk 9 | RE1/WR/AN6 — PORTE bit 1 / parallel port write / analog channel 6 |
| Pin produk 10 | RE2/CS/AN7 — PORTE bit 2 / parallel port chip select / analog channel 7 |
| Pin produk 11 | VDD — Positive digital supply (2.5V to 5.5V) |
| Pin produk 12 | VSS — Digital ground |
| Pin produk 13 | OSC1/CLKIN — Oscillator input / external clock input |
| Pin produk 14 | OSC2/CLKOUT — Oscillator output / clock output |
| Pin produk 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Pin produk 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / Capture-Compare-PWM 2 |
| Pin produk 17 | RC2/CCP1 — PORTC bit 2 / Capture-Compare-PWM 1 |
| Pin produk 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pin produk 19 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pin produk 20 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pin produk 21 | RC6/TX/CK — PORTC bit 6 / UART transmit / I2C clock (slave mode) |
| Pin produk 22 | RC7/RX/DT — PORTC bit 7 / UART receive / I2C data (slave mode) |
| Pin produk 23 | VSS — Digital ground |
| Pin produk 24 | AVDD — Analog positive supply |
| Pin produk 25 | AVSS — Analog ground |
| Pin produk 26 | VREF- — ADC negative reference |
| Pin produk 27 | RB0/INT — PORTB bit 0 / external interrupt |
| Pin produk 28 | RB1 — PORTB bit 1 |
| Pin produk 29 | RB2 — PORTB bit 2 |
| Pin produk 30 | RB3/PGM — PORTB bit 3 / low-voltage programming |
| Pin produk 31 | RB4 — PORTB bit 4 |
| Pin produk 32 | RB5 — PORTB bit 5 |
| Pin produk 33 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pin produk 34 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pin produk 35 | RD0/PSP0 — PORTD bit 0 / parallel slave port bit 0 |
| Pin produk 36 | RD1/PSP1 — PORTD bit 1 / parallel slave port bit 1 |
| Pin produk 37 | RD2/PSP2 — PORTD bit 2 / parallel slave port bit 2 |
| Pin produk 38 | RD3/PSP3 — PORTD bit 3 / parallel slave port bit 3 |
| Pin produk 39 | RD4/PSP4 — PORTD bit 4 / parallel slave port bit 4 |
| Pin produk 40 | RD5/PSP5 — PORTD bit 5 / parallel slave port bit 5 |
| Pin produk 41 | RD6/PSP6 — PORTD bit 6 / parallel slave port bit 6 |
| Pin produk 42 | RD7/PSP7 — PORTD bit 7 / parallel slave port bit 7 |
| Pin produk 43 | AVDD — Analog positive supply (redundant pin) |
| Pin produk 44 | AVSS — Analog ground (redundant pin) |
Aplikasi Umum
PIC16LC74BT-04I/L cocok untuk 7 aplikasis: Industrial Control Panels, Home Appliance Controllers, Automotive Body Electronics Sub-Modules, Sensor Signal Conditioning & Data Acquisition Front-Ends, HVAC and Building Automation, Low-Power Embedded Battery Products, Legacy Production Sustaining Designs.
Industrial Control Panels
The PIC16LC74BT-04I/L suits industrial HMI and control panels where deterministic 8-bit response and an industrial -40C to +85C grade are required. The 4 MHz/1 MIPS core, 33 I/O lines, and PWM peripherals handle relay drivers, indicator LEDs, and panel-switch matrix scanning, while Brown-out Detect/Reset and WDT provide robust field recovery. Designers typically pair the MCU with opto-isolated inputs and the 8-bit ADC for analog sensor conditioning inside 24V panels.
Direkomendasikan
Home Appliance Controllers
In white-goods controllers such as washing machines, dishwashers, and microwave ovens, the PIC16LC74BT-04I/L's 33 I/O and PWM outputs directly drive triac/relay actuators, motor control signals, and seven-segment or LCD user-interface displays. The 192-byte RAM and 7KB OTP accommodate fixed-function appliance firmware, and the 2.5V to 5.5V supply allows direct 5V or 3.3V regulator operation. The OTP memory locks the appliance firmware against in-field tampering once production is locked.
Direkomendasikan
Automotive Body Electronics Sub-Modules
The PIC16LC74BT-04I/L operates in automotive body-electronics sub-modules such as seat controllers, mirror adjusters, and climate-control heads, where its industrial temperature grade and PWM/USART peripherals fit interior 12V-bus subsystems. Its 8-channel 8-bit ADC reads sensor inputs (temperature, position, current) while PWM signals drive small DC-motor H-bridges. Note that for safety-critical automotive domains an AEC-Q100-qualified part is required; the PIC16LC74B family is generally non-automotive-graded.
Direkomendasikan
Sensor Signal Conditioning & Data Acquisition Front-Ends
The PIC16LC74BT-04I/L acts as a low-cost data-acquisition front end for industrial sensors. Its 8-channel 8-bit ADC samples strain gauges, thermistors, or 4-20 mA loop sensors, while the I2C/SPI peripheral connects to external EEPROM, RTC, or DAC companions. With 192 bytes of RAM and serial comms, the part can buffer small packets before forwarding them to a host PLC or SCADA concentrator across UART. The 2.5V minimum supply enables battery-powered remote sensor nodes.
Direkomendasikan
HVAC and Building Automation
The PIC16LC74BT-04I/L fits HVAC thermostats, fan-coil controllers, and building-automation nodes because it offers reliable -40C to +85C operation, 5 x 8-bit plus 1 x 16-bit timers for scheduling PWM outputs, and a Watchdog Timer for unattended operation. The 4 MHz core, brown-out reset, and POR combine for resilient start-up after power-cycling in equipment rooms. Multiple PWM channels can drive TRIAC/SSR heating and 3-speed fan stages from the same MCU.
Direkomendasikan
Low-Power Embedded Battery Products
The "LC" low-voltage CMOS core enables the PIC16LC74BT-04I/L to run directly from a 3.3V rail or single-cell lithium-ion post-regulator, with operating voltage down to 2.5V. This makes it attractive for battery-powered instrumentation, wireless sensor nodes (paired with a discrete RF companion), and portable handheld tools where the 4 MHz instruction budget meets modest compute needs. The 192-byte RAM and 7KB OTP support typical wireless-protocol stack control loops.
Direkomendasikan
Legacy Production Sustaining Designs
Because the PIC16LC74BT-04I/L is obsolete and uses OTP memory, the most common ongoing application is sustaining legacy production lines where firmware is locked and field-installed units need identical replacement MCUs. Industrial OEM customers with multi-decade service contracts (energy metering, elevator controllers, and railroad signaling auxiliaries) keep the part in scope specifically because OTP prevents accidental firmware drift on shipped units.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16LC74BT-04I/L — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16C74B-04I/L | PIC16C74B-04/L | PIC16LC74B-04I/L | PIC16LC74B-04I/P | PIC16C74A-04I/L | PIC16LC74AT-04I/L |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-PLCC | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) | 44-PLCC (same) |
| Core | 8-bit PIC16 RISC (Mid-Range) | 8-bit PIC16 RISC (same) | 8-bit PIC16 RISC (same) | 8-bit PIC16 RISC (same) | 8-bit PIC16 RISC (same) | 8-bit PIC16 RISC (same) | 8-bit PIC16 RISC (same) |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| RAM | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| Packaging Suffix | Tape and Reel ("T") | Tube (no T suffix) | Tube (no T suffix) | Tube (no T suffix) | Tube (no T suffix) | Tube (no T suffix) | Tape and Reel (T suffix) |
| Lifecycle Status | Obsolete | Obsolete (per Microchip) | Obsolete (per Microchip) | Obsolete (per Microchip) | Obsolete (per Microchip) | Obsolete (per Microchip) | Obsolete (per Microchip) |
Diferensiator Kunci
- Industrial OTP silicon with tape-and-reel packaging (vsPIC16C74B-04/L)
- Low-voltage CMOS "LC" core for 2.5V operation (vsPIC16C74B-04/L)
- Same 44-PLCC pinout as the Flash-based PIC16F74B successor (vsPIC16C74B-04I/L)
Catatan Desain
Do NOT select the PIC16LC74BT-04I/L for new designs as of 2026-09-22. The part is in obsolete lifecycle status and uses One-Time-Programmable memory, so firmware cannot be updated in the field. Use the Flash-based PIC16F74B-I/L on the same 44-PLCC footprint for any new development. Reserving the OTP "C" variant solely for legacy sustaining designs is the recommended design rule.
Decouple VDD/AVDD with 0.1 uF and 10 uF capacitors placed within 5 mm of the supply pins, per the Microchip PIC16C74B datasheet layout guidance. Tie the AVDD/AVSS pins on a 44-PLCC footprint to their corresponding supplies even if the ADC is unused, and route analog and digital grounds to a single point to prevent digital switching noise from coupling into ADC channels. Brown-out Detect must be enabled in configuration fuses for industrial deployments to avoid spurious reset behavior.
Place the 4 MHz crystal or resonator within 10 mm of the OSC1/OSC2 pins and keep the oscillator traces over a continuous ground plane. Avoid routing high-speed switching signals (PWM outputs, parallel-slave-port lines) across the MCLR/VPP pin or near the ICSP PGC/PGD pins, as capacitive coupling can corrupt in-circuit programming. For the 44-PLCC socketed application, ensure the PLCC socket retention clip grounds properly to prevent ESD-induced latch-up on the I/O pins.
Informasi Konformitas
This part is OTP CMOS silicon in a 44-PLCC J-bend package; RoHS/REACH/lead-free/halogen-free/conflict-mineral data was not provided in the verified web data and is therefore marked unknown. AEC-Q100 status is not applicable (not qualified per Microchip nomenclature; automotive applications require explicit AEC-Q100-grade parts).
