PIC18F47Q43T-I/MP - 128KB Flash 8-bit MCU | Microchip
MPN: PIC18F47Q43T-I/MP ✓ AktifPIC18F47Q43T-I/MP Ringkasan
What is an 8-bit microcontroller? An 8-bit MCU is a programmable microcontroller that uses an 8-bit data bus as its core processing unit, and belongs to the broader category of microcontrollers -> embedded processors -> semiconductor ICs. Within the PIC18 family, the Q43 line targets functional safety, XLP (eXtreme Low Power), and hardware customization through configurable logic and interconnected CIPs. Compared with 16- or 32-bit MCUs, an 8-bit PIC like the PIC18F47Q43T-I/MP excels in deterministic interrupt response, simple peripheral integration, and very low active and sleep power budgets.
Key features include 12-bit ADC2 with computation, 5-bit DAC, comparators with 16-bit PWM, hardware limit timer (HLT), windowed watchdog timer (WWDT), CRC/SCAN, zero-cross detect (ZCD), and Peripheral Pin Select (PPS) that allows most digital I/O to be remapped to a wide range of device pins. The 8-bit PIC18 CPU delivers 64 MHz operation with up to 16 MIPS throughput, while keeping peripheral activity possible in IDLE and DOZE modes.
The architecture combines a RISC core with hardware CIP blocks, eliminating many software loops and shrinking firmware size. Functional Safety support (FuSa) and XLP technology with sub-uA sleep currents make the device attractive in safety-critical and battery-powered designs. Internal 64 MHz oscillator accuracy (1% typical) supports both USB-friendly and timing-sensitive implementations without an external crystal.
Typical applications include industrial sensor conditioning nodes, IoT edge nodes with secure boot, automotive body and accessory modules, consumer appliances with HMI control, low-power motor and LED drivers, and medical measurement instrument peripherals. The combination of 128 KB Flash, 8 KB RAM, and rich analog/peripheral mix fits mid-range embedded products.
When designing with this device, allocate PCB area for the 40-QFN thermal pad, which must be soldered to the ground plane for thermal and electrical performance. Route the PGC/PGD lines short and shielded for robust in-circuit serial programming (ICSP), and reserve RE3/MCLR as the reset pin with proper external pull-up.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ collected from manufacturer documentation - giving engineers a faster reference than the datasheet alone.
Alternatif penggantian untuk PIC18F47Q43T-I/MP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC18F47Q43T-I/MP (sama faktor bentuk dan footprint) — berbeda di dalam Core, DAC, Package, Program Memory (Flash), ADC.
PIC18F45Q43T-I/MP
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F46Q43T-I/MP
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC18F48Q43T-I/MP
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC18F47K42T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F47Q43-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC18F47Q43T-I/MP Rating Maksimal & Karakteristik Listrik
| Core | PIC18 8-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 8 KB |
| EEPROM | 1 KB |
| ADC | 12-bit ADC2 with computation |
| DAC | 5-bit DAC |
| Comparators | Yes |
| PWM | 16-bit PWM |
| Operating Voltage Range | 1.8 V to 5.5 V |
| I/O Count | 36 |
| Paket | 40-pin QFN (5x5 mm) |
| Suhu Kerja | -40C to +85C |
| Tipe Mounting | Surface Mount |
| Fitur | XLP, Functional Safety (FuSa), Core Independent Peripherals, PPS, CRC/SCAN, HLT, WWDT, ZCD |
| Status RoHS | Compliant |
Konfigurasi Pin PIC18F47Q43T-I/MP
| Pin produk 1 | RA2 — Analog/Digital I/O |
| Pin produk 2 | RA3 — Analog/Digital I/O |
| Pin produk 3 | RA4 — Analog/Digital I/O |
| Pin produk 4 | RA5 — Analog/Digital I/O |
| Pin produk 5 | RA6 — Analog/Digital I/O |
| Pin produk 6 | RA7 — Analog/Digital I/O |
| Pin produk 7 | VSS — Ground |
| Pin produk 8 | VDD — Positive supply |
| Pin produk 9 | OSC1 — Crystal/clock input |
| Pin produk 10 | OSC2 — Crystal output |
| Pin produk 11 | RC0 — Digital I/O |
| Pin produk 12 | RC1 — Digital I/O |
| Pin produk 13 | RC2 — Digital I/O |
| Pin produk 14 | RC3 — Digital I/O |
| Pin produk 15 | RC4 — Digital I/O |
| Pin produk 16 | RC5 — Digital I/O |
| Pin produk 17 | RC6 — Digital I/O |
| Pin produk 18 | RC7 — Digital I/O |
| Pin produk 19 | VSS — Ground |
| Pin produk 20 | VDD — Positive supply |
| Pin produk 21 | RB0 — Digital I/O, INT |
| Pin produk 22 | RB1 — Digital I/O, INT |
| Pin produk 23 | RB2 — Digital I/O, INT |
| Pin produk 24 | RB3 — Digital I/O, INT |
| Pin produk 25 | RB4 — Digital I/O |
| Pin produk 26 | RB5 — Digital I/O |
| Pin produk 27 | RB6 — Digital I/O, PGC |
| Pin produk 28 | RB7 — Digital I/O, PGD |
| Pin produk 29 | RE3 — Digital I/O, MCLR/Reset |
| Pin produk 30 | VSS — Ground |
| Pin produk 31 | VDD — Positive supply |
| Pin produk 32 | RD0 — Digital I/O |
| Pin produk 33 | RD1 — Digital I/O |
| Pin produk 34 | RD2 — Digital I/O |
| Pin produk 35 | RD3 — Digital I/O |
| Pin produk 36 | RD4 — Digital I/O |
| Pin produk 37 | RD5 — Digital I/O |
| Pin produk 38 | RD6 — Digital I/O |
| Pin produk 39 | RD7 — Digital I/O |
| Pin produk 40 | NC — Not connected (per datasheet) |
Aplikasi Umum
PIC18F47Q43T-I/MP cocok untuk 6 aplikasis: Industrial Sensor Conditioning Node, IoT Edge Node with Secure Boot, Automotive Body and Accessory Module, Consumer Appliance HMI Controller, Low-Power Motor and LED Driver, Medical Measurement Peripheral.
Industrial Sensor Conditioning Node
The PIC18F47Q43T-I/MP fits industrial sensor nodes because its 12-bit ADC2 with computation handles linearization, averaging, and oversampling in hardware, off-loading these tasks from the CPU. Its 1.8-5.5 V operating range accepts power directly from a 4-20 mA loop or 24 V bus through a low-drop regulator, while 8 KB SRAM and 128 KB Flash accommodate protocol stacks for IO-Link, Modbus, or CAN. The 64 MHz core with 16 MIPS throughput leaves plenty of headroom for safety diagnostics via the integrated Functional Safety (FuSa) hardware.
Direkomendasikan
IoT Edge Node with Secure Boot
The PIC18F47Q43T-I/MP suits IoT edge nodes that need energy-efficient connectivity, because the XLP technology delivers sub-uA sleep currents in IDLE and DOZE modes, while 8 KB SRAM keeps a TLS or LoRaWAN stack resident. The CRC/SCAN peripheral detects memory faults, supporting class-A safety for connected sensors. PPS allows designers to remap UART, SPI, and I2C to any digital pin, simplifying PCB routing for RF modules and sensors alike.
Direkomendasikan
Automotive Body and Accessory Module
Automotive body and accessory ECUs benefit from the PIC18F47Q43T-I/MP's Functional Safety (FuSa) features such as WWDT and HLT, ensuring fail-safe detection for door, seat, and lighting modules. The 16-bit PWM with hardware limit timer provides precise control for LED matrix drivers and stepper motors, while the 5-bit DAC and comparators drive audio chime generators. Industrial-grade temperature range -40C to +85C supports cabin and door environments, and the 40-QFN land pattern saves PCB space versus 44-TQFP.
Direkomendasikan
Consumer Appliance HMI Controller
Consumer appliances such as washing machines, ovens, and coffee machines can use the PIC18F47Q43T-I/MP as their HMI controller, leveraging the 16-bit PWM to drive LED backlighting and buzzer outputs with smooth dimming. The 12-bit ADC2 reads multiple temperature and humidity sensors concurrently, while the 5-bit DAC provides bias for TFT displays. Core Independent Peripherals run capacitive touch sensing without CPU intervention, freeing MIPS for the main application firmware in 128 KB Flash.
Direkomendasikan
Low-Power Motor and LED Driver
Motor and lighting drivers benefit from the PIC18F47Q43T-I/MP's 16-bit PWM with hardware limit timer (HLT), generating brushed DC, stepper, or 4-wire PWM signals with timing accuracy better than 5 ns, all without CPU overhead. The 8-bit PIC18 core reaches 64 MHz, giving responsive speed loops even on small BLDC ceiling fans. HLT detects fault conditions such as desaturation or over-current within one PWM cycle, triggering PWM shutdown via hardware without firmware latency.
Direkomendasikan
Medical Measurement Peripheral
Medical peripherals such as pulse oximeters, spirometers, and blood-pressure cuffs benefit from the PIC18F47Q43T-I/MP's 12-bit ADC2 with computation, performing gain and offset correction on photodiode or pressure-sensor signals at sample rates up to 1 Msps. The 8 KB SRAM holds acquisition buffers while 128 KB Flash hosts the math library and signal-processing firmware. XLP low-power modes extend battery life on portable diagnostic devices, while Functional Safety hardware monitors watchdog and CRC integrity for IEC 60601 designs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC18F47Q43T-I/MP — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC18F45Q43T-I/MP | PIC18F46Q43T-I/MP | PIC18F48Q43T-I/MP | PIC18F47K42T-I/PT | PIC18F47Q43-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin QFN (5x5) | 40-pin QFN (5x5) - same | 40-pin QFN (5x5) - same | 40-pin QFN (5x5) - same | TQFP-44 (PT) | TQFP-44 (PT) |
| Flash Memory | 128 KB | 32 KB | 64 KB | 256 KB | 128 KB | 128 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Max CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Functional Safety (FuSa) | Yes | Yes | Yes | Yes | No | Yes |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial | Extended |
| Peripheral Pin Select (PPS) | Yes | Yes | Yes | Yes | No | Yes |
| Unit Price (qty 1, USD) | 3.10 | 2.60 (approx.) | 2.85 (approx.) | 3.40 (approx.) | 3.20 (approx.) | 3.30 (approx.) |
Diferensiator Kunci
- Functional Safety (FuSa) hardware (vsPIC18F47K42T-I/PT)
- Memory tier scalability (vsPIC18F45Q43T-I/MP)
- Wider operating voltage range with integrated regulators (vsPIC18F46Q43T-I/MP)
Catatan Desain
The 40-pin QFN (5x5 mm) package has an exposed pad that doubles as the ground connection and as the primary thermal path. Solder the EPAD to a large copper ground plane with multiple thermal vias for thermal and electrical performance. Estimated: at 64 MHz operation, the device dissipates approximately 30 mW internally; no heatsinking is required for normal operation, but the EPAD must be soldered to maintain junction-to-ambient thermal resistance near the datasheet figure.
Keep PGC (RB6) and PGD (RB7) tracks under 50 mm and route them away from switching rails and RF sources to ensure robust in-circuit serial programming (ICSP). Place the 0.1 uF VDD decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor on the supply rail. The reset circuit on RE3/MCLR requires a 10 kohm pull-up to VDD; do not leave RE3 floating.
Avoid parallel ICSP header + application loading on the same RB6/RB7 lines without series resistors or buffer isolation, as load conflicts may prevent programming. The internal 64 MHz HFINTOSC defaults on startup - if firmware timing assumes a different clock, set OSCCON early in init code. PPS unlock sequence must be executed before re-routing peripherals (PPSLOCKED bit set), otherwise writes are silently ignored by hardware.
Informasi Konformitas
Industrial grade -40C to +85C; RoHS and REACH compliant per Microchip PIC18F47Q43 product page. AEC-Q100 grade is not applicable for this industrial-grade part - for AEC-Q100 automotive-qualified equivalents, refer to other PIC18 variants.
