PIC24F08KL200-I/ST - 16-bit 32MHz 8KB MCU | Microchip
MPN: PIC24F08KL200-I/ST ✓ AktifPIC24F08KL200-I/ST Ringkasan
A microcontroller is a programmable semiconductor that combines a processor core, memory, I/O ports, timers, serial interfaces and other peripherals on one integrated circuit. The PIC24F family belongs to the 16-bit MCU hierarchy and provides a practical platform for industrial control, instrumentation, sensor interfaces and compact consumer equipment. The PIC24F08KL200-I/ST adds nanoWart XLP technology for low-power operation and supports peripherals familiar to PIC18 users, including MSSP serial interfaces and CCP modules.
Key specifications include a 32 MHz operating speed, 8 KB Flash memory organized as 2.75K by 24, 512 bytes of RAM and a 3 V to 3.6 V supply range. The device has 17 I/O ports and uses a 14-pin TSSOP package. Its XLP design is intended to reduce current consumption when the application does not require continuous high-rate processing.
The PIC24F08KL200 combines a 16-bit architecture with general-purpose peripherals for embedded control. MSSP can support I2C or SPI communication, while CCP modules provide capture, compare and PWM functions for timing, motor control and signal-generation tasks. The 8 KB Flash capacity supports compact control firmware, while the 512-byte RAM provides working storage for protocol buffers, status variables and control logic.
Typical uses include industrial sensor nodes, low-cost data loggers, battery-powered monitoring devices, small motor controllers, LED control boards and embedded instrumentation. The 32 MHz clock allows the MCU to service multiple peripherals and control loops while the low-power features suit applications that spend substantial time in idle or sleep states.
When designing a PCB around the PIC24F08KL200-I/ST, confirm the TSSOP-14 land pattern and route the power and decoupling connections according to the manufacturer pin description and application guidance. Leave programming and debug access available, verify oscillator requirements, and account for the operating temperature range of -40°C to +85°C when specifying the industrial-temperature variant.
This product page combines the manufacturer product information, distributor package and pricing links, application guidance, and engineering-oriented selection notes. It is designed to help engineers confirm memory size, clock rate, package, peripheral availability and replacement considerations before integrating the microcontroller into a new embedded design.
Alternatif penggantian untuk PIC24F08KL200-I/ST — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24F08KL200-I/ST (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, ADC, Comparators, Core Architecture.
PIC24F08KL200T-I/ST
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24F08KL200-I/SS
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24F08KL200-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24F08KL200-I/MC
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24F08KL200-I/ML
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24F08KL200-I/ST Rating Maksimal & Karakteristik Listrik
| Product Type | 16-bit Flash Microcontroller |
| Maximum Clock Speed | 32 MHz |
| Architecture | 16-bit |
| Flash Program Memory | 8 KB (2.75K x 24) |
| RAM | 512 bytes |
| I/O Ports | 17 |
| Supply Voltage Range | 3 V to 3.6 V |
| Paket | 14-pin TSSOP |
| Suhu Kerja | -40°C to +85°C |
| Performance | 16 MIPS |
| Low-Power Technology | nanoWatt XLP |
| Serial Peripheral | MSSP supporting I2C/SPI |
| Capture/Compare/PWM | CCP peripherals |
| Program Memory Type | Flash |
| Tipe Mounting | Surface Mount |
| Status Lingkungan Hidup | Active |
| Jumlah Pin | 14 pins |
| Manufacturer Product Family | PIC24F XLP |
PIC24F08KL200-I/ST 14-pin tssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk PIC24F08KL200-I/ST (14-pin tssop pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk PIC24F08KL200-I/ST.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PIC24F08KL200-I/ST cocok untuk 6 aplikasis: Industrial Sensor Node, Battery-Powered Monitoring Device, Compact Data Logger, Small Motor and Valve Controller, LED Control and Dimming, Embedded Instrumentation.
Industrial Sensor Node
The PIC24F08KL200-I/ST fits compact industrial sensor nodes that combine 16-bit processing, 32 MHz operation and low-power operation in a 14-pin TSSOP. Its 8 KB Flash provides space for acquisition logic, calibration and diagnostics, while 512 bytes of RAM can hold protocol and status variables. MSSP communication supports I2C or SPI sensor links, and CCP modules can handle timing or simple PWM tasks. The -40°C to +85°C range supports industrial environments when the complete assembly meets its thermal requirements.
Direkomendasikan
Battery-Powered Monitoring Device
The PIC24F08KL200-I/ST is suitable for battery-powered monitors that periodically sample a sensor and return data through a serial interface. Its nanoWart XLP technology supports reduced-power operating modes, while the 32 MHz CPU provides sufficient performance for control logic and protocol handling between measurements. The 8 KB Flash accommodates compact firmware and the 512-byte RAM supports temporary data buffering. Careful sleep-mode design and peripheral clock gating are important for maximizing battery life.
Direkomendasikan
Compact Data Logger
A PIC24F08KL200-I/ST-based data logger can sample inputs, format records and transfer them through I2C or SPI. The 16-bit architecture and 32 MHz clock provide responsive timing for buffering and control operations, while 8 KB Flash stores the application program and 512 bytes RAM provides a working buffer. For designs requiring greater storage capacity, an external serial memory or dedicated storage controller can be paired with the MCU. The TSSOP-14 footprint also supports compact control boards.
Direkomendasikan
Small Motor and Valve Controller
The PIC24F08KL200-I/ST can control small motors, valves or solenoid loads where the system requires deterministic timing and compact firmware. CCP peripherals support capture, compare and PWM functions, while MSSP provides a path to sensors or digital power stages. The 32 MHz clock and 16-bit architecture are useful for closed-loop control calculations, and the 3 V to 3.6 V operating range suits a 3.3 V control architecture. Drivers and protection networks must be sized independently from the MCU supply.
Direkomendasikan
LED Control and Dimming
The PIC24F08KL200-I/ST is appropriate for LED status, indication and dimming boards that need flexible timing and serial configuration. CCP modules can generate or measure PWM waveforms, allowing dimming and fault feedback functions to share the MCU. Its 17 I/O ports provide useful connectivity in a small controller, while 32 MHz processing leaves headroom for animation and communication tasks. A suitable transistor or LED driver is still required when the load exceeds the MCU's direct I/O capability.
Direkomendasikan
Embedded Instrumentation
The PIC24F08KL200-I/ST can serve as the control core of compact measurement equipment with digital sensors, a display interface and serial communications. Its 16-bit architecture supports arithmetic and protocol handling, and 32 MHz operation helps maintain responsive sampling and control. MSSP I2C/SPI connectivity accommodates sensors and converters, while CCP functions can support timing measurements. The 14-pin TSSOP package minimizes board area, but external signal conditioning and protection remain necessary for real-world analog inputs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24F08KL200-I/ST — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24F08KL200T-I/ST | PIC24F08KL200-I/SS | PIC24F08KL200-I/SO | PIC24F08KL200-I/MC | PIC24F08KL200-I/ML |
|---|---|---|---|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP | 14-pin TSSOP |
| Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 8 KB (2.75K x 24) | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| RAM | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Peripheral Highlights | MSSP I2C/SPI and CCP | MSSP I2C/SPI and CCP | MSSP I2C/SPI and CCP | MSSP I2C/SPI and CCP | MSSP I2C/SPI and CCP | MSSP I2C/SPI and CCP |
Diferensiator Kunci
- 16-bit processing at 32 MHz in a compact package (vsPIC24F08KL200T-I/ST)
- MSSP and CCP integration reduces external hardware (vsPIC24F08KL200-I/SS)
- nanoWart XLP supports compact low-power products (vsPIC24F08KL200-I/SO)
- Exact 8 KB Flash organization supports 16-bit firmware architecture (vsPIC24F08KL200-I/MC)
Catatan Desain
Use the manufacturer TSSOP-14 footprint and pin-description table when placing the PIC24F08KL200-I/ST. Keep the device's supply decoupling pins close to their respective ground connections, route sensitive analog and communication signals away from switching-node traces, and provide a stable ground reference. Confirm programming-test-point access on the assembled board because a compact layout can make firmware updates and production programming unnecessarily difficult.
Design the power rail for the documented 3 V to 3.6 V operating range and include sufficient local decoupling for the MCU. Validate brownout, startup and peak-current behavior at the chosen regulator because fast wake-up from XLP sleep modes can create a repeatable load step. Separate sensitive analog references from digital supply paths where the board supports that isolation, and verify regulator headroom during high-frequency operation.
Do not select a replacement from memory size or clock speed alone. Confirm the 14-pin package, pin names, I/O functions, MSSP configuration, CCP resources, programming interface and electrical limits for every alternative. The 8 KB Flash and 512-byte RAM budgets also require firmware review: interrupt-heavy code, large buffers or protocol libraries can exhaust memory even when the application initially appears compact.
Keep clock, programming and communication traces short where practical, and provide a quiet reference environment for any sensitive measurement connected to the MCU. If a crystal or external oscillator is used, follow the manufacturer's capacitance and layout recommendations closely. For PWM or motor-control outputs, route gate and base drive signals away from ADC or sensor inputs to reduce switching coupling and false transitions.
Informasi Konformitas
The exact-MPN listings identify the device as active and industrial-temperature, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declarations were included.
