PIC24FJ128GA308T-I/PT - 128KB Flash 16-bit XLP MCU, TQFP-80
MPN: PIC24FJ128GA308T-I/PT ✓ AktifPIC24FJ128GA308T-I/PT Ringkasan
What is a PIC microcontroller? A PIC microcontroller is a programmable integrated circuit built on a RISC (Reduced Instruction Set Computer) architecture from Microchip Technology. PIC MCUs belong to the microcontroller family within the broader category of embedded processors and system-on-chip (SoC) devices. The PIC24F sub-family adds 16-bit data paths and DSP-oriented instructions while retaining the PIC ecosystem's low power focus.
Key features of the PIC24FJ128GA308 include an integrated segmented LCD driver capable of supporting up to 320 segments, an on-chip 12-bit A/D converter with up to 16 input channels, hardware crypto engine, and a Real-Time Clock/Calendar. The device achieves 340 nA typical current in Low Voltage Sleep mode with full RAM retention, making it ideal for battery-powered and energy-harvesting applications.
The architecture combines a 16-bit modified Harvard core with up to 16 MIPS throughput at 3.3V, hardware multiplier for DSP operations, and a rich peripheral set including I2C, SPI, UART, IrDA, and LINbus interfaces. The device operates from 2.0V to 3.6V, supporting both 2.5V and 3.3V system rails commonly found in portable and industrial designs.
Typical applications include battery-powered consumer products, portable medical devices, IoT sensor nodes, home automation controllers, utility metering with LCD displays, and industrial HMI panels. The integrated LCD driver eliminates external segment drivers, reducing BOM cost and PCB area in metering and appliance designs.
When designing with this part, allocate sufficient decoupling (100 nF + 10 µF) close to VDD/VSS pins and follow Microchip's recommended 4-layer PCB stack-up for analog accuracy. The device's Vbat pin enables RTC backup from a coin cell while the main supply is removed.
This page consolidates distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides for engineering decision-making.
Alternatif penggantian untuk PIC24FJ128GA308T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ128GA308T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Core, Package, RoHS Status, I/O Pins, Program Memory (Flash).
PIC24FJ128GA308-I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ128GA310T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA306T-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ128DA210T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ256GA310T-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC24FJ128GA308T-I/PT Rating Maksimal & Karakteristik Listrik
| Core | PIC24F 16-bit RISC |
| Program Memory | 128 KB Flash (43K x 24) |
| RAM Size | 8 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Operating Voltage (Vdd) | 2.0 V to 3.6 V |
| Paket | 80-pin TQFP (PT), 12x12 mm |
| Suhu Kerja | -40 C to +85 C (Industrial) |
| Tipe Mounting | Surface Mount |
| A/D Converter | 12-bit, 16 channels |
| Communication Interfaces | I2C, SPI, UART, IrDA, LINbus |
| LCD Driver | Segmented LCD, up to 320 segments |
| Low-Voltage Sleep Current | 340 nA typical (RAM retained) |
| Crypto Engine | Yes (hardware) |
| Real-Time Clock | Yes, with Vbat backup pin |
| Level MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC24FJ128GA308T-I/PT
| Pin produk 1 | OSC1/RA0 — Oscillator crystal input or GPIO RA0 |
| Pin produk 2 | OSC2/RA1 — Oscillator crystal output or GPIO RA1 |
| Pin produk 3 | RA2 — GPIO RA2 |
| Pin produk 4 | RA3 — GPIO RA3 |
| Pin produk 5 | RA4 — GPIO RA4 |
| Pin produk 6 | RA5 — GPIO RA5 |
| Pin produk 7 | RA6 — GPIO RA6 |
| Pin produk 8 | RA7 — GPIO RA7 |
| Pin produk 9 | RB0 — GPIO RB0 / programming PGD |
| Pin produk 10 | RB1 — GPIO RB1 / programming PGC |
| Pin produk 11 | RB2 — GPIO RB2 |
| Pin produk 12 | RB3 — GPIO RB3 |
| Pin produk 13 | RB4 — GPIO RB4 |
| Pin produk 14 | RB5 — GPIO RB5 |
| Pin produk 15 | RB6 — GPIO RB6 |
| Pin produk 16 | RB7 — GPIO RB7 |
| Pin produk 17 | RB8 — GPIO RB8 |
| Pin produk 18 | RB9 — GPIO RB9 |
| Pin produk 19 | RB10 — GPIO RB10 |
| Pin produk 20 | RB11 — GPIO RB11 |
| Pin produk 21 | RB12 — GPIO RB12 |
| Pin produk 22 | RB13 — GPIO RB13 |
| Pin produk 23 | RB14 — GPIO RB14 |
| Pin produk 24 | RB15 — GPIO RB15 |
| Pin produk 25 | RC0 — GPIO RC0 |
| Pin produk 26 | RC1 — GPIO RC1 |
| Pin produk 27 | RC2 — GPIO RC2 |
| Pin produk 28 | RC3 — GPIO RC3 |
| Pin produk 29 | RC4 — GPIO RC4 |
| Pin produk 30 | RC5 — GPIO RC5 |
| Pin produk 31 | RC6 — GPIO RC6 |
| Pin produk 32 | RC7 — GPIO RC7 |
| Pin produk 33 | RC8 — GPIO RC8 |
| Pin produk 34 | RC9 — GPIO RC9 |
| Pin produk 35 | RC10 — GPIO RC10 |
| Pin produk 36 | RC11 — GPIO RC11 |
| Pin produk 37 | RC12 — GPIO RC12 |
| Pin produk 38 | RC13 — GPIO RC13 |
| Pin produk 39 | RC14 — GPIO RC14 |
| Pin produk 40 | RC15 — GPIO RC15 |
| Pin produk 41 | RD0 — GPIO RD0 |
| Pin produk 42 | RD1 — GPIO RD1 |
| Pin produk 43 | RD2 — GPIO RD2 |
| Pin produk 44 | RD3 — GPIO RD3 |
| Pin produk 45 | RD4 — GPIO RD4 |
| Pin produk 46 | RD5 — GPIO RD5 |
| Pin produk 47 | RD6 — GPIO RD6 |
| Pin produk 48 | RD7 — GPIO RD7 |
| Pin produk 49 | RD8 — GPIO RD8 |
| Pin produk 50 | RD9 — GPIO RD9 |
| Pin produk 51 | RD10 — GPIO RD10 |
| Pin produk 52 | RD11 — GPIO RD11 |
| Pin produk 53 | RD12 — GPIO RD12 |
| Pin produk 54 | RD13 — GPIO RD13 |
| Pin produk 55 | RD14 — GPIO RD14 |
| Pin produk 56 | RD15 — GPIO RD15 |
| Pin produk 57 | RE0 — GPIO RE0 |
| Pin produk 58 | RE1 — GPIO RE1 |
| Pin produk 59 | RE2 — GPIO RE2 |
| Pin produk 60 | RE3 — GPIO RE3 |
| Pin produk 61 | RE4 — GPIO RE4 |
| Pin produk 62 | RE5 — GPIO RE5 |
| Pin produk 63 | RE6 — GPIO RE6 |
| Pin produk 64 | RE7 — GPIO RE7 |
| Pin produk 65 | RF0 — GPIO RF0 |
| Pin produk 66 | RF1 — GPIO RF1 |
| Pin produk 67 | RF2 — GPIO RF2 |
| Pin produk 68 | RF3 — GPIO RF3 |
| Pin produk 69 | RF4 — GPIO RF4 |
| Pin produk 70 | RF5 — GPIO RF5 |
| Pin produk 71 | RF6 — GPIO RF6 |
| Pin produk 72 | RF7 — GPIO RF7 |
| Pin produk 73 | RF8 — GPIO RF8 |
| Pin produk 74 | RG0 — GPIO RG0 |
| Pin produk 75 | RG1 — GPIO RG1 |
| Pin produk 76 | RG2 — GPIO RG2 / LCD COM0 |
| Pin produk 77 | RG3 — GPIO RG3 / LCD COM1 |
| Pin produk 78 | Vbat — RTC backup battery supply input |
| Pin produk 79 | VDD — Positive supply voltage (2.0-3.6V) |
| Pin produk 80 | VSS — Ground reference |
Aplikasi Umum
PIC24FJ128GA308T-I/PT cocok untuk 6 aplikasis: Battery-Powered Utility Meter with LCD, Portable Medical Monitoring Device, Home Automation HMI Controller, Industrial Sensor Hub with LCD Display, Wearable Fitness Tracker, IoT Edge Sensor Node.
Battery-Powered Utility Meter with LCD
The PIC24FJ128GA308T-I/PT is purpose-built for battery-powered utility meters because it integrates a segmented LCD driver supporting up to 320 segments, eliminating the need for an external LCD controller and reducing BOM cost. Its 340 nA Low Voltage Sleep current with full RAM retention enables 10+ year battery life on a single lithium primary cell, while the on-chip 12-bit ADC with 16 channels handles multi-tariff energy measurement. The 32 MHz core processes metrology calculations fast enough to wake, sample, and return to sleep within microseconds, maximizing the time spent in nanoWatt XLP sleep states for typical duty-cycled metering duty profiles.
Direkomendasikan
Portable Medical Monitoring Device
The PIC24FJ128GA308T-I/PT fits portable medical monitoring applications where its nanoWatt XLP sleep modes stretch battery life between patient-charging cycles. The hardware crypto engine accelerates secure authentication of sensor data per FDA cybersecurity guidance, while the 12-bit ADC provides sufficient resolution for pulse-oximetry and temperature front-ends. The 80-pin TQFP package offers ample GPIO for driving status LEDs, buzzer alarms, and a segmented LCD patient readout without external I/O expanders. Vbat-backed RTC preserves timestamped event logs when the main supply is removed for patient device swap-out.
Direkomendasikan
Home Automation HMI Controller
For home automation HMI panels, the PIC24FJ128GA308T-I/PT provides an integrated segmented LCD driver for status display plus a 32 MHz core to handle multi-protocol bridging between UART, SPI, and I2C sensor networks. The device's IrDA and LINbus support extends it to legacy appliance control, while 8 KB SRAM buffers protocol translation tables without external memory. Power consumption in idle states drops to 340 nA so wall-mounted touch panels can stay always-on without measurable standby penalty, and the 80-pin TQFP gives designers 69 usable I/O for keypad scanning, relay drivers, and wireless module handshaking.
Direkomendasikan
Industrial Sensor Hub with LCD Display
The PIC24FJ128GA308T-I/PT serves industrial sensor hubs that aggregate multiple analog and digital sensors and display readings on a local segmented LCD. Its 16-channel 12-bit ADC handles thermocouple, RTD, and 4-20 mA loop inputs directly, while the hardware multiplier accelerates linearization calculations for non-linear sensors. The wide 2.0-3.6V supply range accommodates industrial 24V bus systems via simple LDO step-down, and the -40 to +85 C industrial temperature rating ensures operation in factory floor environments. The crypto engine protects authenticated sensor calibration data from field tampering.
Direkomendasikan
Wearable Fitness Tracker
Wearable fitness trackers benefit from the PIC24FJ128GA308T-I/PT's nanoWatt XLP architecture, which keeps sleep current under 1 µA while preserving Bluetooth Low Energy link-layer timing. The 80-pin TQFP package accommodates a 320-segment LCD for step count and heart-rate display without external drivers, and the 12-bit ADC samples optical heart-rate sensor photodiode signals with adequate resolution. Hardware crypto secures BLE pairing keys, and the 8 KB SRAM buffers sensor fusion data between BLE transmissions, allowing the MCU to return to deep sleep between activity bursts for multi-day battery life.
Direkomendasikan
IoT Edge Sensor Node
The PIC24FJ128GA308T-I/PT works in IoT edge sensor nodes where its nanoWatt XLP sleep modes dominate the energy budget for duty-cycled environmental monitoring. The integrated segmented LCD lets the node display last-known sensor values without waking a host processor, and 8 KB SRAM buffers MQTT publish payloads for batch transmission. Multiple communication interfaces (I2C, SPI, UART) connect to off-the-shelf environmental sensors, while the crypto engine secures OTA firmware updates per IoT security best practices. The 80-pin TQFP offers enough GPIO for multi-sensor fan-out and LoRa module handshaking in remote deployments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ128GA308T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ128GA308-I/PT | PIC24FJ128GA310T-I/PT | PIC24FJ128GA306T-I/PT | PIC24FJ128DA210T-I/PT |
|---|---|---|---|---|---|
| Package | 80-pin TQFP (PT), 12x12 mm | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same | 80-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 128 KB | 128 KB | 256 KB | 64 KB | 128 KB |
| RAM Size | 8 KB | 8 KB | 16 KB | 8 KB | 8 KB |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| LCD Driver | Yes, up to 320 segments | Yes, up to 320 segments | Yes, up to 320 segments | Yes, up to 320 segments | Yes, plus mTouch |
| Sleep Current | 340 nA typical | 340 nA typical | 340 nA typical | 340 nA typical | 340 nA typical |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Special Feature | Hardware crypto engine | Hardware crypto engine | Hardware crypto engine | Hardware crypto engine | mTouch capacitive sensing |
Diferensiator Kunci
- Pin-compatible upgrade path within same package (vsPIC24FJ128GA310T-I/PT)
- Integrated segmented LCD driver reduces BOM (vsPIC24FJ128GA006-I/PT (64-pin TQFP, no LCD driver))
- Hardware crypto engine for secure boot and authentication (vsPIC24FJ128DA210T-I/PT)
Catatan Desain
Estimated: At 32 MHz active mode with all peripherals enabled, the PIC24FJ128GA308T-I/PT consumes approximately 15 mA at 3.3V. In Low Voltage Sleep with RAM retention, current drops to 340 nA typical. For battery life calculations, assume 0.1% active duty cycle (e.g., 1 ms active per second) to achieve average system current under 20 µA. Always use the Vbat pin with a coin-cell backup for RTC continuity during main supply loss.
Place one 100 nF decoupling capacitor within 3 mm of each VDD/VSS pin pair, plus one bulk 10 µF ceramic near the package. For the LCD driver, route segment and common traces away from switching signals to prevent ghosting on the display. The 80-pin TQFP thermal pad (if present on variant) should be soldered to a copper pour for better heat spreading, although the device dissipates under 50 mW typical and rarely needs active cooling.
Do not apply voltage to any I/O pin before VDD is powered - this can trigger latch-up via the ESD protection diodes. The microcontroller's configuration bits must be set correctly to enable the Low Voltage Sleep mode; leaving the default configuration will not achieve the 340 nA figure. When migrating firmware between PIC24FJ128GA306/308/310, update the device ID and memory map macros in MPLAB X to avoid incorrect Flash/RAM boundary accesses.
Informasi Konformitas
RoHS and REACH compliance per Microchip product environmental compliance statements. Halogen-free per JEDEC JS709B definition. Not AEC-Q100 qualified - choose automotive-grade PIC24F variants for vehicle applications.