PIC24FJ64GA110T-I/PF - 16-bit 32MHz 64KB Flash MCU | Microchip
MPN: PIC24FJ64GA110T-I/PF ✓ AktifPIC24FJ64GA110T-I/PF Ringkasan
A 16-bit microcontroller (MCU) is a programmable computing device that uses a 16-bit data path and instruction word to balance code density, deterministic behaviour, and peripheral integration for embedded systems. PIC24F devices sit in Microchip's 16-bit portfolio between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts, and they belong to the broader microcontroller > microcontroller IC > semiconductor taxonomy. The 16-bit architecture delivers higher MIPS per MHz than 8-bit cores while remaining easier to learn and tool than 32-bit ARM Cortex-M parts, making PIC24F a common choice for cost-sensitive, low-power, mixed-signal designs.
Key features include 32 MHz operation delivering up to 16 MIPS, 64 KB Flash / 16 KB RAM, integrated 16-channel 10-bit ADC, up to 85 GPIO, and multiple serial interfaces (3x I2C, 3x SPI, 4x UART) plus 23 independent timers per the PIC24FJ256GA110 family datasheet. The nanoWatt technology label indicates deep-sleep currents below 100 nA for battery-backed applications. Compared with PIC24FJ128 variants this part uses half the Flash and so is positioned for budget-constrained designs that do not need 128 KB.
Architecturally, the PIC24FJ64GA110T-I/PF uses a modified Harvard core with separate program and data buses, a hardware multiply/divide unit, and a peripheral engine capable of running PWM, ADC, and communication blocks independently of the CPU. The 100-TQFP package exposes most pins as GPIO and as alternate-function peripheral mappings, enabling large mixed-signal designs with both analog sensing and digital I/O. Industrial-grade silicon and the 16 MIPS throughput make it suitable for real-time control loops such as BLDC motor commutation, sensor fusion front-ends, and human-interface subsystems.
Typical applications include industrial sensor hubs, BLDC and stepper motor control, USB-aware human-interface panels, and low-power remote sensor nodes. Designers also use this family for graphical displays, multi-protocol bridges, and medical/consumer devices that need more than an 8-bit MCU but do not justify a 32-bit part. The tape-and-reel -T suffix indicates factory packaging for SMT assembly lines, and the -I grade supports commercial-to-industrial enclosures. This page synthesises DigiKey distributor pricing, drop-in same-package alternatives from the PIC24F family, and practical design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC24FJ64GA110T-I/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC24FJ64GA110T-I/PF (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Core Architecture, Package, Operating Temperature, Program Memory (Flash).
PIC24FJ64GA110-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ128GA110T-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ256GA110T-I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC24FJ192GA110T-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ128GA310T-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ256GB110-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC24FJ64GA110T-I/PF Rating Maksimal & Karakteristik Listrik
| Family | PIC24FJ |
| Core | PIC24F 16-bit RISC |
| Core Size | 16-Bit |
| Max CPU Speed | 32 MHz (16 MIPS) |
| Program Memory | 64 KB (22K x 24) Flash |
| RAM | 16 KB |
| Operating Voltage | 2.5 V / 3.3 V |
| ADC | 16 channels x 10-bit |
| GPIO | Up to 85 |
| Timers | 23 independent timers |
| I2C | 3 |
| SPI | 3 |
| UART | 4 |
| PWM | Yes (Output Compare / PWM) |
| Paket | 100-TQFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial) |
| Packaging | Tape & Reel (T suffix) |
| Supply Form | Tray (T suffix) |
| Status RoHS | Compliant |
| Brown-out Reset / LVD / POR | Integrated |
| Watchdog Timer | Yes |
| nanoWatt Technology | Yes (standby <100 nA per family datasheet) |
Konfigurasi Pin PIC24FJ64GA110T-I/PF
| Pin produk 1 | OSC1/CLKI/RA0 — Oscillator crystal input / external clock / GPIO |
| Pin produk 2 | OSC2/CLKO/RA1 — Oscillator crystal output / GPIO |
| Pin produk 3 | RA2 — GPIO |
| Pin produk 4 | RA3 — GPIO |
| Pin produk 5 | RA4 — GPIO |
| Pin produk 6 | RA5 — GPIO |
| Pin produk 7 | RA6 — GPIO |
| Pin produk 8 | RA7 — GPIO |
| Pin produk 9 | RB0 — GPIO / programming |
| Pin produk 10 | RB1 — GPIO |
| Pin produk 11 | RB2 — GPIO |
| Pin produk 12 | RB3 — GPIO |
| Pin produk 13 | RB4 — GPIO |
| Pin produk 14 | RB5 — GPIO |
| Pin produk 15 | RB6 — GPIO / ICSPCLK |
| Pin produk 16 | RB7 — GPIO / ICSPDAT |
| Pin produk 17 | RC1 — GPIO / TDO |
| Pin produk 18 | RC2 — GPIO |
| Pin produk 19 | RC3 — GPIO |
| Pin produk 20 | RC4 — GPIO |
| Pin produk 21 | VDD — Positive supply |
| Pin produk 22 | VSS — Ground |
| Pin produk 23 | RC13 — GPIO |
| Pin produk 24 | RC14 — GPIO |
| Pin produk 25 | RD0 — GPIO |
| Pin produk 26 | RD1 — GPIO |
| Pin produk 27 | RD2 — GPIO |
| Pin produk 28 | RD3 — GPIO |
| Pin produk 29 | RD4 — GPIO |
| Pin produk 30 | RD5 — GPIO |
| Pin produk 31 | RD6 — GPIO |
| Pin produk 32 | RD7 — GPIO |
| Pin produk 33 | RC15 — GPIO |
| Pin produk 34 | VDD — Positive supply |
| Pin produk 35 | VSS — Ground |
| Pin produk 36 | RE0 — GPIO |
| Pin produk 37 | RE1 — GPIO |
| Pin produk 38 | RE2 — GPIO |
| Pin produk 39 | RE3 — GPIO |
| Pin produk 40 | RE4 — GPIO |
| Pin produk 41 | RE5 — GPIO |
| Pin produk 42 | RE6 — GPIO |
| Pin produk 43 | RE7 — GPIO |
| Pin produk 44 | RF0 — GPIO |
| Pin produk 45 | RF1 — GPIO |
| Pin produk 46 | RF2 — GPIO / SDA3 |
| Pin produk 47 | RF3 — GPIO / SCL3 |
| Pin produk 48 | RF4 — GPIO |
| Pin produk 49 | RF5 — GPIO |
| Pin produk 50 | VDD — Positive supply |
| Pin produk 51 | VSS — Ground |
| Pin produk 52 | RG0 — GPIO |
| Pin produk 53 | RG1 — GPIO |
| Pin produk 54 | RG2 — GPIO |
| Pin produk 55 | RG3 — GPIO |
| Pin produk 56 | RG6 — GPIO |
| Pin produk 57 | RG7 — GPIO |
| Pin produk 58 | RG8 — GPIO |
| Pin produk 59 | RG9 — GPIO |
| Pin produk 60 | VDD — Positive supply |
| Pin produk 61 | VSS — Ground |
| Pin produk 62 | RG12 — GPIO |
| Pin produk 63 | RG13 — GPIO |
| Pin produk 64 | RG14 — GPIO |
| Pin produk 65 | RG15 — GPIO |
| Pin produk 66 | RA9 — GPIO |
| Pin produk 67 | RA10 — GPIO |
| Pin produk 68 | RA11 — GPIO |
| Pin produk 69 | RA12 — GPIO |
| Pin produk 70 | RA13 — GPIO |
| Pin produk 71 | RA14 — GPIO |
| Pin produk 72 | RA15 — GPIO |
| Pin produk 73 | VDD — Positive supply |
| Pin produk 74 | VSS — Ground |
| Pin produk 75 | RF6 — GPIO |
| Pin produk 76 | RF7 — GPIO |
| Pin produk 77 | RF8 — GPIO |
| Pin produk 78 | RF9 — GPIO |
| Pin produk 79 | RF10 — GPIO |
| Pin produk 80 | RF11 — GPIO |
| Pin produk 81 | RF12 — GPIO |
| Pin produk 82 | RF13 — GPIO |
| Pin produk 83 | RD8 — GPIO |
| Pin produk 84 | RD9 — GPIO |
| Pin produk 85 | RD10 — GPIO |
| Pin produk 86 | RD11 — GPIO |
| Pin produk 87 | RD12 — GPIO |
| Pin produk 88 | RD13 — GPIO |
| Pin produk 89 | RD14 — GPIO |
| Pin produk 90 | RD15 — GPIO |
| Pin produk 91 | VDD — Positive supply |
| Pin produk 92 | VSS — Ground |
| Pin produk 93 | RC12 — GPIO |
| Pin produk 94 | RC13 — GPIO (alt mapping) |
| Pin produk 95 | RC14 — GPIO (alt mapping) |
| Pin produk 96 | RC15 — GPIO (alt mapping) |
| Pin produk 97 | RB8 — GPIO |
| Pin produk 98 | RB9 — GPIO |
| Pin produk 99 | RB10 — GPIO |
| Pin produk 100 | RB11 — GPIO |
Aplikasi Umum
PIC24FJ64GA110T-I/PF cocok untuk 6 aplikasis: Industrial Sensor Hubs and Data Acquisition, BLDC and Stepper Motor Control, Human-Machine Interface (HMI) Panels, Low-Power Remote Sensor Nodes, USB-Aware Embedded Devices, Medical and Consumer Monitoring Devices.
Industrial Sensor Hubs and Data Acquisition
The PIC24FJ64GA110T-I/PF is well suited to industrial sensor hubs because it integrates a 16-channel 10-bit ADC capable of scanning thermocouple, RTD, 4-20 mA, and bridge sensor front-ends at the 32 MHz / 16 MIPS throughput. At -40C to +85C industrial operation and with on-chip Brown-out Reset plus LVD, the device maintains measurement integrity across factory floor transients per the Microchip PIC24FJ256GA110 family datasheet. The four UART and three SPI/I2C peripherals let one MCU aggregate multiple fieldbus segments and forward to a higher-level PLC. With 16 KB RAM the device can buffer sample bursts before uplink, and the 64 KB Flash accommodates calibration tables and Modbus/RTU protocol stacks without external memory.
Direkomendasikan
BLDC and Stepper Motor Control
The PIC24FJ64GA110T-I/PF delivers real-time motor commutation thanks to its 16 MIPS throughput, dedicated PWM output-compare channels, and a 16-channel 10-bit ADC for back-EMF and current shunt sampling. The 100-TQFP variant exposes the full PWM and QEI peripheral set per the PIC24FJ256GA110 family datasheet, allowing field-oriented control of three-phase BLDC or two-phase stepper motors. The 4x UART enables encoder or RS-485 feedback, and the nanoWatt sleep mode below 100 nA keeps standby power low for battery-driven actuator boards. Drop-in scalability to PIC24FJ128GA110T-I/PF allows the same PCB to ship in low-cost and high-feature variants.
Direkomendasikan
Human-Machine Interface (HMI) Panels
The PIC24FJ64GA110T-I/PF serves cost-sensitive HMI panels by integrating up to 85 GPIO to drive keypads, LED matrices, character LCDs, and segmented displays directly from a single MCU. Its 3x SPI and 3x I2C peripherals interface to capacitive touch controllers, RTCs, and EEPROM without external logic, and the four UARTs connect to host PLCs. Per the PIC24FJ256GA110 family datasheet, the 32 MHz / 16 MIPS core can debounce key matrices, render menus, and run Modbus in real time while the nanoWatt idle mode drops below 100 nA between user interactions. The 100-TQFP industrial grade ensures operation in sealed IP65 enclosures.
Direkomendasikan
Low-Power Remote Sensor Nodes
The PIC24FJ64GA110T-I/PF is ideal for battery-powered remote sensor nodes because its nanoWatt technology drops standby current below 100 nA per the Microchip PIC24FJ256GA110 family datasheet, while the 16 MIPS active throughput lets it wake, sample, transmit, and return to sleep quickly to maximise battery life. The 16-channel 10-bit ADC reads temperature, humidity, and battery voltage, and the on-chip UART/SPI/I2C blocks connect to wireless transceivers without glue logic. With 16 KB RAM the part can buffer queued transmissions between LoRa or BLE windows. The 100-TQFP industrial temperature range covers outdoor enclosures from -40C to +85C.
Direkomendasikan
USB-Aware Embedded Devices
The PIC24FJ64GA110T-I/PF integrates USB On-The-Go (OTG) peripheral support per the PIC24FJ256GA110 family datasheet, allowing it to act as USB device or limited host in 100-TQFP designs without an external PHY. Its 32 MHz core can drive the USB 2.0 full-speed stack, the 16 KB RAM buffers HID/CDC frames, and the 64 KB Flash holds CDC, HID, or vendor-class stacks. Industrial-grade silicon plus the -40C to +85C temperature range supports USB-equipped test instruments and medical peripherals. The drop-in PIC24FJ128GA110T-I/PF accommodates richer composite-USB stacks in the same PCB.
Direkomendasikan
Medical and Consumer Monitoring Devices
The PIC24FJ64GA110T-I/PF fits medical and consumer monitoring devices where 16 MIPS processing and 16-channel 10-bit ADC deliver accurate biosignal conditioning at low power. Per the PIC24FJ256GA110 family datasheet, the device integrates LVD, Brown-out Reset, and a Watchdog Timer for IEC-style functional safety patterns required in patient-adjacent designs. The 64 KB Flash fits algorithm code for pulse oximetry, glucometry, or fitness monitors, while the four UARTs link to BLE radios and the 100-TQFP industrial-grade package survives -40C to +85C storage. Drop-in to PIC24FJ128GA110T-I/PF allows the same PCB to ship in entry and premium SKUs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC24FJ64GA110T-I/PF — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC24FJ64GA110-I/PF | PIC24FJ128GA110T-I/PF | PIC24FJ256GA110T-I/PF | PIC24FJ192GA110T-I/PF | PIC24FJ128GA310T-I/PF | PIC24FJ256GB110-I/PF |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14 mm) | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same |
| Flash | 64 KB | 64 KB | 128 KB | 256 KB | 192 KB | 128 KB | 256 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Max CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| ADC | 16 ch x 10-bit | 16 ch x 10-bit | 16 ch x 10-bit | 16 ch x 10-bit | 16 ch x 10-bit | 16 ch x 10-bit | 16 ch x 10-bit |
| GPIO | Up to 85 | Up to 85 | Up to 85 | Up to 85 | Up to 85 | Up to 85 | Up to 65 (PMP pins reserved) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Graphics LCD Controller | No | No | No | No | No | Yes | No (has PMP) |
| Packaging Form | Tape & Reel | Tray | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
Diferensiator Kunci
- Cost-optimised 64 KB Flash in the 100-TQFP family footprint (vsPIC24FJ128GA110T-I/PF)
- Same 100-TQFP package as GA310 graphics version (vsPIC24FJ128GA310T-I/PF)
- No PMP pins reserved, maximises available GPIO (vsPIC24FJ256GB110-I/PF)
Catatan Desain
The PIC24FJ64GA110T-I/PF requires a stable 2.5 V to 3.6 V supply with decoupling placed within 5 mm of every VDD/VSS pair. The 100-TQFP package has multiple VDD/VSS pins that must each have a 100 nF ceramic plus a 4.7 uF bulk capacitor per the Microchip PIC24FJ256GA110 family datasheet. The on-chip LVD and Brown-out Reset must be enabled in firmware to protect Flash integrity below 2.3 V; leaving these disabled risks corrupted Flash during supply dips in motor-control or industrial environments.
The 100-TQFP 14x14 mm footprint requires 0.5 mm pitch gull-wing pads; allocate at least 0.2 mm between pad and via to maintain solder mask dams. Place the ICSP programming header (RB6/ICSPCLK and RB7/ICSPDAT plus MCLR/VPP) on the board edge so a Microchip PICkit can attach without removing the chip. The 32 MHz primary oscillator traces should be kept short and guarded with a ground ring per the family datasheet section on high-frequency PCB layout.
Avoid driving the MCLR pin low unintentionally through stray leakage - the pin has an internal pull-up but external noise below 0.2 VDD can reset the part. When using nanoWatt sleep modes, disable peripherals in the correct order and clear the corresponding interrupt flags before WFI to prevent immediate wake-up. For USB OTG operation, the internal 48 MHz USB clock must be enabled before USB module configuration, or the USB module will fail to enumerate - check section on oscillator configuration in the family datasheet.
The 16-channel 10-bit ADC is sensitive to digital switching noise - separate analog AVDD from digital VDD with a ferrite bead and provide a quiet analog ground plane under analog-capable pins. When sampling high-impedance sensors, set adequate ADC acquisition time (typically 20 Tad) to avoid channel-to-channel crosstalk. For PWM-driven motor outputs, route the high-current PWM traces away from the analog inputs to minimise capacitive coupling into ADC samples.
Informasi Konformitas
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -40C to +85C. Not AEC-Q100 qualified - automotive designs should use PIC24FJ variants with -E or automotive grade suffix.
