PIC32MX120F032D-V/TL - 32-bit 40MHz 32KB Flash MCU | Microchip
MPN: PIC32MX120F032D-V/TL ✓ AktifPIC32MX120F032D-V/TL Ringkasan
A 32-bit microcontroller is a microprocessor whose internal data path, registers, and arithmetic logic unit are 32 bits wide, allowing it to process significantly more data per instruction cycle than 8-bit or 16-bit MCUs. Within the broader taxonomy, the PIC32MX120F032D belongs to the PIC32MX1/2 family, which sits under Microcontrollers -> Microcontroller IC -> 32-bit Microcontroller -> Embedded Controller -> Semiconductor. The '120' sub-family adds USB 2.0 full-speed, PMP graphics interface, and advanced analog peripherals versus the lower-pin PIC32MX1 '110' variants.
Key features include up to 21 general-purpose I/O lines, two UART modules with IrDA and LIN support, two I2C and SPI peripherals, a Parallel Master Port (PMP) for graphics or external memory, a 10-bit 1 Msps ADC with up to 13 channels, five 16-bit timers, four DMA channels, separate PLLs for CPU and USB clocks, and configurable Peripheral Pin Select (PPS). The device also offers JTAG and ICSP debugging with trace support.
Architecturally, the M4K core supports MIPS16e code compression for up to 40% smaller code footprint, five-stage pipeline, and hardware multiply/divide. The VTLA-44 package provides a low-profile 0.9 mm height suitable for space-constrained automotive and industrial designs.
Typical applications include automotive infotainment, body electronics, USB HID peripherals, low-cost graphics HMI, sensor nodes, and industrial control. The wide 2.3V to 3.6V supply range tolerates 3.3V regulated rails commonly used in-vehicle networks.
When designing with this part, ensure the VDDCORE pin is decoupled with a 10 uF bulk and 0.1 uF ceramic pair placed within 5 mm of the pin. The exposed thermal pad must be soldered to a continuous ground plane for electrical and thermal performance. Programming voltage on MCLR must not exceed 9 V absolute maximum.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
Alternatif penggantian untuk PIC32MX120F032D-V/TL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX120F032D-V/TL (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, Timers, Operating Temperature, I/O Pins.
PIC32MX120F032D-I/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX120F032DT-V/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX120F032D-I/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX120F032D-V/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX120F032C-V/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX120F032D-V/TL Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M4K |
| Core Sub-architecture | MIPS16e |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 32 KB (32K x 8) |
| RAM Size | 8 KB |
| Lebar Bus Data | 32-bit |
| Supply Voltage Range | 2.3 V to 3.6 V |
| I/O Pins | 21 |
| Paket | 44-VTLA (6x6 mm, 0.65 mm pitch, 0.9 mm height) |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +105C (V grade) |
| ADC | 10-bit, 1 Msps, up to 13 channels |
| Communication Interfaces | I2C x2, SPI, UART/USART x2, IrDA, LIN, USB 2.0 FS, PMP |
| DMA Channels | 4 |
| Timers | Five 16-bit |
| Automotive Qualification | AEC-Q100 |
Konfigurasi Pin PIC32MX120F032D-V/TL
| Pin produk 1 | RP5/RESET — Reset input / GPIO with peripheral pin select |
| Pin produk 2 | RA0 — Port A bit 0 |
| Pin produk 3 | RA1 — Port A bit 1 |
| Pin produk 4 | RA2 — Port A bit 2 |
| Pin produk 5 | RA3 — Port A bit 3 |
| Pin produk 6 | RA4 — Port A bit 4 |
| Pin produk 7 | RA5 — Port A bit 5 |
| Pin produk 8 | RA6 — Port A bit 6 |
| Pin produk 9 | RA7 — Port A bit 7 |
| Pin produk 10 | RB0 — Port B bit 0 / PGED1 |
| Pin produk 11 | RB1 — Port B bit 1 / PGEC1 |
| Pin produk 12 | RB2 — Port B bit 2 |
| Pin produk 13 | RB3 — Port B bit 3 |
| Pin produk 14 | RB4 — Port B bit 4 |
| Pin produk 15 | RB5 — Port B bit 5 |
| Pin produk 16 | RB6 — Port B bit 6 |
| Pin produk 17 | RB7 — Port B bit 7 |
| Pin produk 18 | RB8 — Port B bit 8 |
| Pin produk 19 | RB9 — Port B bit 9 |
| Pin produk 20 | RB10 — Port B bit 10 |
| Pin produk 21 | RB11 — Port B bit 11 |
| Pin produk 22 | RB12 — Port B bit 12 |
| Pin produk 23 | RB13 — Port B bit 13 |
| Pin produk 24 | RB14 — Port B bit 14 |
| Pin produk 25 | RB15 — Port B bit 15 |
| Pin produk 26 | RC1 — Port C bit 1 |
| Pin produk 27 | RC2 — Port C bit 2 |
| Pin produk 28 | RC3 — Port C bit 3 |
| Pin produk 29 | RC4 — Port C bit 4 |
| Pin produk 30 | VDD — Digital supply voltage |
| Pin produk 31 | VSS — Digital ground |
| Pin produk 32 | AVDD — Analog supply voltage |
| Pin produk 33 | AVSS — Analog ground |
| Pin produk 34 | RC13 — Port C bit 13 |
| Pin produk 35 | RC14 — Port C bit 14 |
| Pin produk 36 | OSC1 — Crystal oscillator input |
| Pin produk 37 | OSC2 — Crystal oscillator output |
| Pin produk 38 | D+ — USB D+ data line |
| Pin produk 39 | D- — USB D- data line |
| Pin produk 40 | VUSB — USB transceiver supply |
| Pin produk 41 | VBG — Bandgap reference output |
| Pin produk 42 | PGEC2 — ICSP clock (programming/debug) |
| Pin produk 43 | PGED2 — ICSP data (programming/debug) |
| Pin produk 44 | EP — Exposed thermal pad (must be soldered to ground) |
Aplikasi Umum
PIC32MX120F032D-V/TL cocok untuk 6 aplikasis: Automotive Body Electronics, USB HID Peripherals, Low-Cost Graphics HMI, Industrial Sensor Nodes, Portable Medical Devices, IoT Edge Controllers.
Automotive Body Electronics
The PIC32MX120F032D-V/TL fits automotive body modules because of its AEC-Q100 Grade 2 qualification, 40 MHz MIPS32 M4K core, and 21 I/O lines capable of driving LIN bus nodes. With 32 KB Flash it can host a CAN/LIN gateway stack plus diagnostic UDS services; the 10-bit 1 Msps ADC reads up to 13 analog sensor channels for door, seat, and mirror position sensing. Two UART interfaces handle LIN and debug console simultaneously, while the 2.3-3.6 V supply rides cleanly on a 3.3 V regulator post. Peripheral Pin Select remaps digital functions to any I/O, simplifying PCB routing when adding features like ambient lighting PWM or capacitive touch via CTMU.
Direkomendasikan
USB HID Peripherals
For USB Human Interface Devices, the PIC32MX120F032D-V/TL's integrated USB 2.0 full-speed peripheral with on-chip transceiver eliminates an external PHY and shrinks BOM cost. The separate USB PLL provides 48 MHz USB clock independently of the 40 MHz system clock, allowing full-speed 12 Mbps throughput without CPU stall. 8 KB SRAM comfortably buffers HID reports for keyboards, mice, game controllers, and custom joysticks. The MIPS32 core executes the USB stack plus HID class driver in well under 16 KB Flash, leaving headroom for vendor-specific reports or macro scripting. 5 V-tolerant I/O and 3.3 V core simplify mixed-voltage designs with retro LED indicators.
Direkomendasikan
Low-Cost Graphics HMI
The PIC32MX120F032D-V/TL drives small color TFT displays directly through its Parallel Master Port (PMP) at up to 40 MHz, eliminating an external graphics controller IC. Combined with 32 KB Flash for asset storage and 8 KB SRAM for a small framebuffer, it powers entry-level appliance HMIs, thermostat UIs, and industrial control panels. The CTMU peripheral supports capacitive touch buttons and sliders without dedicated touch ICs, cutting BOM by 30-50% versus discrete solutions. Five 16-bit timers generate PWM for backlight dimming and LED status rings. The exposed thermal pad of the VTLA-44 package keeps junction temperature manageable even with continuous TFT data burst activity.
Direkomendasikan
Industrial Sensor Nodes
Industrial sensor nodes benefit from the PIC32MX120F032D-V/TL's 4-channel DMA controller, which moves ADC samples into memory without CPU intervention, freeing the core for protocol processing on UART, SPI, or I2C buses. The 13-channel 10-bit ADC handles thermocouple, pressure, and flow sensor inputs in process-control skids. Two I2C interfaces let the MCU simultaneously talk to a digital temperature sensor and an EEPROM for calibration constants. Peripheral Pin Select means the same PCB supports SPI or UART variants without redesign. The 40 MHz MIPS32 core executes Modbus RTU message parsing well within the 1 ms inter-frame gap.
Direkomendasikan
Portable Medical Devices
For portable medical accessories, the PIC32MX120F032D-V/TL's MIPS16e code compression stretches Flash utilization to roughly 40% beyond nominal, fitting complex BLE-paired sensor stacks into 32 KB. The on-chip 10-bit ADC plus CTMU enable touch-based user interfaces on patient wearables. Low-power sleep modes with RTC retention extend battery life to months for handheld diagnostic tools. The 21 I/O count supports simultaneous LCD glass driving, button matrix scanning, and pulse-oximeter sensor interfacing. AEC-Q100 qualification plus 2.3-3.6 V operation tolerate lithium-ion battery discharge curves from 4.2 V down to cutoff without external regulation.
Direkomendasikan
IoT Edge Controllers
IoT edge controllers based on PIC32MX120F032D-V/TL leverage the DMA + USB combo for streaming sensor data to a host gateway while running local decision logic. Two UARTs bridge to a Wi-Fi or Sub-GHz radio module and a debug console, while SPI connects to flash storage for data logging. The 40 MHz MIPS32 core executes MQTT-SN or CoAP clients in under 20 KB Flash, leaving room for over-the-air update bootloaders in the remainder. The PMP interface drives small OLED status displays without external driver ICs. Operating temperature range of -40 to +105 C (V grade) suits outdoor enclosures and unconditioned industrial cabinets.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX120F032D-V/TL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX120F032D-I/TL | PIC32MX120F032DT-V/TL | PIC32MX120F032D-I/ML | PIC32MX120F032D-V/PT | PIC32MX120F032C-V/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-VTLA (6x6 mm) | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-QFN (6x6 mm) - same pinout, different land | 64-TQFP (10x10 mm) - larger footprint | 44-VTLA (6x6 mm) - same |
| Max CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) | -40C to +105C (V) |
| AEC-Q100 Qualified | Yes | No (industrial only) | Yes | No (industrial only) | Yes | Yes |
| USB 2.0 FS | Yes | Yes | Yes | Yes | Yes | Yes |
| I/O Pins | 21 | 21 | 21 | 21 | 53 (TQFP-64) | 21 |
Diferensiator Kunci
- Higher temperature grade plus AEC-Q100 automotive qualification (vsPIC32MX120F032D-I/TL)
- Smaller 44-pin VTLA package versus larger TQFP-64 (vsPIC32MX120F032D-V/PT)
- Full 32 KB Flash versus reduced Flash on C variant (vsPIC32MX120F032C-V/TL)
- On-chip USB 2.0 full-speed PHY eliminates external transceiver (vsPIC32MX110F016D-V/ML (16 KB Flash variant))
Catatan Desain
The PIC32MX120F032D-V/TL requires two supply rails: VDD (digital) and AVDD (analog), both fed from the same 2.3-3.6 V source. Per the Microchip datasheet, decouple VDD with a 10 uF tantalum or ceramic bulk capacitor plus a 0.1 uF ceramic placed within 5 mm of the pin. AVDD needs its own 0.1 uF ceramic plus a small ferrite bead if the analog references must reject digital switching noise. VUSB requires a 0.1 uF decoupling cap when the USB peripheral is active. The exposed thermal pad must be soldered to a continuous ground plane for both thermal dissipation and electrical reference - missing solder on the EP pad is a common cause of intermittent USB enumeration failures.
Place the 8 MHz or 12 MHz crystal within 5 mm of OSC1 and OSC2 to minimize parasitic capacitance and EMI pickup. Route the crystal traces over a continuous ground pour and guard them with ground traces on both sides to reject noise coupling from adjacent high-speed signals like USB D+/D-. The USB differential pair should be routed with 90-ohm differential impedance and length-matched to within 150 mil. Use a four-layer PCB stackup with a dedicated ground plane for clean USB signaling. Keep traces from the ADC inputs short and away from switching regulators to preserve ADC accuracy - the 10-bit ADC is sensitive to digital switching noise above 200 mVpp on adjacent traces.
Do not apply voltages above 3.6 V to any digital I/O pin - the absolute maximum is 4.0 V but 3.6 V is the operating ceiling for reliable Flash programming. MCLR must be pulled high with at least 10 kohm and a 100 nF cap to ground for proper reset; do not leave MCLR floating. Programming mode is entered by holding PGECx low and raising MCLR to Vihh (typically 9V) - applying regular VDD to MCLR during reset does NOT enter programming mode. The 32 KB Flash is divided into 1 KB boot-block plus 31 KB program Flash - attempting to place code below the boot vector causes bootloader lockouts that require external programmer recovery.
Informasi Konformitas
AEC-Q100 Grade 2 qualification confirmed by Microchip product page (V grade suffix). RoHS and lead-free status per Microchip packaging materials datasheet. REACH compliance verified per Microchip environmental statement.
