PIC32MX130F064B-V/SO - 32-bit MCU 64KB Flash 40MHz 28-SOIC | Microchip
MPN: PIC32MX130F064B-V/SO ✓ AktifPIC32MX130F064B-V/SO Ringkasan
A 32-bit microcontroller (MCU) is a microprocessor that integrates CPU, memory, and peripherals on a single silicon die. PIC32MX1XX/2XX family parts sit in Microchip's mid-range 32-bit MCU hierarchy: PIC32MX1XX/2XX -> PIC32MX family -> MIPS32 M4K architecture -> 32-bit microcontrollers -> microcontrollers -> embedded processors. Compared with 8-bit PIC16/PIC18 MCUs, the PIC32MX1XX/2XX family delivers higher code density and DSP-class arithmetic, at the cost of greater die area and typically higher price per unit. Compared with ARM Cortex-M0/M0+ devices, the PIC32MX offers mature Microchip MPLAB X toolchain support and pin compatibility across the family, simplifying migration between memory sizes.
Key features of the PIC32MX130F064B-V/SO include 1.1 DMIPS/MHz core performance, less than 0.5 mA/MHz active current, an integrated on-chip temperature sensor, a Charge Time Measurement Unit (CTMU) for mTouch capacitive touch and high-resolution 1 ns time measurement, and a USB 2.0 Full-Speed Device peripheral. The PMP enables graphics and external memory interfaces, while PPS allows flexible digital peripheral routing to any I/O pin, simplifying PCB layout.
The architecture combines a 5-stage pipeline MIPS32 M4K core with tightly coupled SRAM, Flash, and a peripheral bridge. The device supports industrial-grade -40 °C to +105 °C operation in this V-temperature variant, with 16 KB SRAM and 64 KB Flash in this F064B configuration. The ADC, comparators, and CTMU make the device a strong fit for mixed-signal embedded applications.
Typical applications include consumer audio docks with USB connectivity, low-cost graphics terminals using PMP, capacitive touch human-machine interface (HMI) panels, industrial sensor hubs with on-chip temperature measurement, and portable medical peripherals that require USB device connectivity. The combination of PPS, CTMU, and mTouch support also enables low-cost user-interface subsystems.
When designing with this part, ensure decoupling per datasheet recommendations and follow Microchip's ICSP programming guidelines: any PGECx/PGEDx pin pair may be used for in-circuit serial programming, but both pins of the chosen pair must be used together. The wide-body SOIC (-V/SO) package aids hand-soldering and rework in prototyping.
This page synthesizes distributor pricing, drop-in PIC32MX1XX/2XX family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC32MX130F064B-V/SO — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX130F064B-V/SO (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Operating Temperature, Operating Temperature Range, Timers.
PIC32MX130F064B-I/SO
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX130F064BT-V/SO
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX150F128B-V/SO
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC32MX170F256B-V/SO
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX130F064B-I/SS
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX130F064B-V/SO Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M4K |
| Core Size | 32-bit |
| Maximum CPU Speed | 40 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (SRAM) | 16 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| Number of I/O Pins | 21 |
| Paket | 28-SOIC (SOIC-28 wide-body, 7.50 mm) |
| Rentang Suhu Kerja | -40 °C to +105 °C (V grade) |
| ADC | 10-bit, up to 1 Msps, up to 10 channels |
| Comparators | On-chip analog comparators |
| PWM Channels | Multiple 16-bit PWM outputs |
| Communication Interfaces | 2x I2S/SPI, I2C, USB 2.0 FS Device, PMP |
| Timers | 5 x 16-bit general-purpose timers |
| CTMU | Charge Time Measurement Unit for mTouch and 1 ns time measurement |
| On-chip Temperature Sensor | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Parallel Master Port (PMP) | Yes |
| Active Current | < 0.5 mA/MHz (typical) |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX130F064B-V/SO
| Pin produk 1 | MCLR — Master clear / reset input |
| Pin produk 2 | RA0 — Port A bit 0 / analog input |
| Pin produk 3 | RA1 — Port A bit 1 / analog input |
| Pin produk 4 | RB0 — Port B bit 0 / PGED1 |
| Pin produk 5 | RB1 — Port B bit 1 / PGEC1 |
| Pin produk 6 | RB2 — Port B bit 2 / analog input |
| Pin produk 7 | RB3 — Port B bit 3 / analog input |
| Pin produk 8 | VSS — Ground reference |
| Pin produk 9 | OSC1 — Oscillator input / CLKI |
| Pin produk 10 | OSC2 — Oscillator output / CLKO |
| Pin produk 11 | RB4 — Port B bit 4 |
| Pin produk 12 | RA2 — Port A bit 2 |
| Pin produk 13 | VDD — Positive supply voltage |
| Pin produk 14 | RA3 — Port A bit 3 |
| Pin produk 15 | RB5 — Port B bit 5 |
| Pin produk 16 | RB6 — Port B bit 6 / PGEC2 |
| Pin produk 17 | RB7 — Port B bit 7 / PGED2 |
| Pin produk 18 | RB8 — Port B bit 8 |
| Pin produk 19 | VSS — Ground reference |
| Pin produk 20 | RA4 — Port A bit 4 |
| Pin produk 21 | RB9 — Port B bit 9 |
| Pin produk 22 | RC0 — Port C bit 0 |
| Pin produk 23 | RC1 — Port C bit 1 |
| Pin produk 24 | RC2 — Port C bit 2 |
| Pin produk 25 | RC3 — Port C bit 3 |
| Pin produk 26 | RC4 — Port C bit 4 / D- |
| Pin produk 27 | RC5 — Port C bit 5 / D+ |
| Pin produk 28 | VDD — Positive supply voltage |
Aplikasi Umum
PIC32MX130F064B-V/SO cocok untuk 6 aplikasis: USB Audio Consumer Devices, Capacitive Touch HMI Panels, Low-Cost Graphics Terminals, Industrial Sensor Hubs, Portable Medical Peripherals, IoT Edge Sensor Nodes.
USB Audio Consumer Devices
The PIC32MX130F064B-V/SO fits USB audio devices because its integrated USB 2.0 Full-Speed Device controller and dual I2S ports provide a complete audio path without an external bridge IC. The 40 MHz MIPS32 M4K core runs a USB HID/CDFC stack and 16 KB SRAM holds audio descriptors, while the CTMU remains available for capacitive buttons. A typical implementation routes USB D+/D- to the upstream connector and I2S LRCK/BCLK/DATA to a DAC such as the PCM5102A; the V-grade -40 to +105 °C range supports consumer enclosure thermals.
Direkomendasikan
Capacitive Touch HMI Panels
The PIC32MX130F064B-V/SO's on-chip Charge Time Measurement Unit (CTMU) provides 1 ns time resolution, which directly drives mTouch capacitive touch button and slider sensing without an external touch controller. Its 64 KB Flash fits Microchip's mTouch libraries plus application code, while 16 KB SRAM handles gesture state machines. The CTMU also enables high-resolution pulse-width measurement, useful for proximity and water-tolerant touch. Pair with a turnkey touch PCB and the Microchip mTouch reference firmware for fastest time-to-market.
Direkomendasikan
Low-Cost Graphics Terminals
The PIC32MX130F064B-V/SO's integrated Parallel Master Port (PMP) drives external LCD controllers and small TFT displays with up to 8-bit parallel data without external glue logic, while the Peripheral Pin Select (PPS) flexibility keeps board routing clean. Its 40 MHz core, 64 KB Flash, and 16 KB SRAM are sufficient for character-based and simple bitmap UIs on 128x64 to 320x240 displays. The V-grade temperature range covers industrial enclosures, and the SOIC-28 package simplifies hand-soldering during prototype work.
Direkomendasikan
Industrial Sensor Hubs
The PIC32MX130F064B-V/SO's 10-bit 1 Msps ADC, on-chip temperature sensor, and CTMU together handle multi-channel analog sensing plus temperature compensation in a single chip. Its V-grade -40 to +105 °C operating range matches industrial cabinet environments, and the dual I2S/SPI interfaces connect to digital sensors or isolators. PPS remapping isolates analog and digital pin groups to reduce crosstalk. This combination suits PLC analog-input modules, environmental sensor aggregators, and 4-20 mA loop converters.
Direkomendasikan
Portable Medical Peripherals
The PIC32MX130F064B-V/SO's USB Full-Speed Device controller enumerates as a CDC, HID, or vendor-class peripheral to a host PC or tablet, while the on-chip ADC and CTMU capture sensor data with low noise. Its sub-0.5 mA/MHz active current extends battery runtime in handheld devices, and the V-grade temperature range supports skin-contact thermals. Typical implementations are USB pulse-oximeter dongles, hearing-aid programming interfaces, and connected spirometer probes. The SOIC-28 wide-body aids prototyping and rework.
Direkomendasikan
IoT Edge Sensor Nodes
The PIC32MX130F064B-V/SO fits connected edge sensors that need USB for initial provisioning and I2C/SPI for downstream sensors. Its PPS feature lets designers assign peripheral pins freely, while the CTMU's 1 ns resolution supports precision timing for ultrasonic or pulse-based sensors. The 64 KB Flash holds a TLS stack and application logic, and the 28-SOIC package simplifies thermal dissipation in enclosed housings. The V-grade temperature range and Microchip 10-year longevity commitment suit long-life industrial IoT deployments.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX130F064B-V/SO — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX130F064B-I/SO | PIC32MX130F064BT-V/SO | PIC32MX150F128B-V/SO | PIC32MX170F256B-V/SO | PIC32MX130F064B-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (wide-body) | 28-SOIC (wide-body) - same | 28-SOIC (wide-body) - same | 28-SOIC (wide-body) - same | 28-SOIC (wide-body) - same | SSOP-28 - same pinout, smaller body |
| Flash Memory | 64 KB | 64 KB | 64 KB | 128 KB | 256 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 64 KB | 16 KB |
| Maximum CPU Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Temperature | -40 to +105 °C (V-grade) | -40 to +85 °C (I-grade) | -40 to +105 °C (V-grade) | -40 to +105 °C (V-grade) | -40 to +105 °C (V-grade) | -40 to +85 °C (I-grade) |
| USB Controller | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device |
| Supply Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
Diferensiator Kunci
- V-grade -40 to +105 °C temperature range (vsPIC32MX130F064B-I/SO)
- Same-package upgrade to 128 KB Flash (vsPIC32MX150F128B-V/SO)
- Same die, smaller package for compact designs (vsPIC32MX130F064B-I/SS)
- USB 2.0 FS Device + 16 KB SRAM in single chip (vsPIC32MX130F064B-V/ML)
Catatan Desain
Place a 10 µF bulk capacitor and a 0.1 µF decoupling capacitor close to each VDD pin (13 and 28). On the analog supply AVDD, add a 10 µF plus 0.1 µF pair and a ferrite bead from VDD if ADC accuracy is required. Per the PIC32MX1XX/2XX family datasheet, VDD must rise monotonically from 0 V to 2.3 V within Microchip's POR timing; if the rail can rise slowly, use a dedicated reset supervisor or assert MCLR externally.
Keep the 28-SOIC (wide-body) land pattern at least 200 mil wide so the part remains hand-solderable. Place the crystal or resonator within 5 mm of OSC1/OSC2 (pins 9/10) and guard the traces with a ground pour; long oscillator traces couple in noise and degrade USB signaling. Route the USB D+/D- differential pair with 90 Ω impedance and length matching to within 150 mil per the USB 2.0 specification.
Pair PGECx and PGEDx pins for ICSP - choosing PGEC2 requires ICSPDAT on PGED2, not on PGED1. According to the family datasheet and Microchip programming documentation, mixing pairs prevents in-circuit programming. Also remember that USB D+/D- pins are NOT remappable through PPS; if your board layout places them elsewhere, you must use the dedicated pin functions or move to a different package.
At 40 MHz the device dissipates well under 100 mW, but the SOIC-28 wide-body (theta_JA approximately 70 C/W on a 1-oz 4-layer board) still rises several degrees in enclosed, unventilated housings. Estimated: junction-to-ambient rise ≈ 0.07 °C/mW above ambient at 25 °C - within the V-grade +105 °C budget, but conservative designs should add a thermal via array under the copper pour.
Informasi Konformitas
RoHS and lead-free per Microchip product page. AEC-Q100 automotive qualification is not claimed on this part; for automotive designs use a PIC32MX AEC-Q100 qualified variant. Halogen-free status not explicitly stated in verified data - set to unknown.
