Microchip Technology

PIC32MX130F128LT-V/PF - 32-bit MCU, 128KB Flash, 100-TQFP | Microchip

MPN: PIC32MX130F128LT-V/PF ✓ Aktif

2.3 V to 3.6 V Vdss 100-pin TQFP (14x14 mm) Package 50 MHz (83 DMIPS) Speed 128 KB (128K x 8) Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

PIC32MX130F128LT-V/PF Ringkasan

The Microchip Technology PIC32MX130F128LT-V/PF is a 32-bit MIPS M4K microcontroller delivering 83 DMIPS at 50 MHz core frequency, housed in a 100-pin TQFP (14x14 mm) package with 128 KB Flash and 16 KB RAM. It integrates two I2S, four SPI, USB, I2C, UART, 10-bit ADC, and a Parallel Master Port (PMP), plus a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. AEC-Q100 qualified grade and an extended -40C to +105C junction temperature range make it a fit for industrial and automotive embedded systems.

What is a PIC32MX microcontroller? PIC32MX is Microchip's family of 32-bit MIPS-based microcontrollers positioned between PIC24/dsPIC and Cortex-M class parts in the embedded hierarchy. They run the MIPS32 M4K core with single-cycle multiply and hardware divide, giving them deterministic performance suited to control loops and audio processing. Within the PIC32MX1xx/2xx/3xx/4xx/5xx/6xx/7xx series, the PIC32MX130 sits at the entry level with 128 KB Flash and 16 KB RAM and is targeted at cost-sensitive HMI, audio playback, and USB device applications.

The PIC32MX130F128LT-V/PF is built on 40 MHz internal bus architecture with peripheral pin select (PPS), which lets designers remap digital peripherals onto any GPIO, simplifying PCB layout. It supports 5V-tolerant I/O on most pins, a 10-bit 1 Msps ADC with up to 28 channels, and a 16-bit Parallel Master Port for graphics or external memory. The integrated USB 2.0 full-speed device, two I2S modules, and CTMU support audio playback with capacitive touch buttons in a single chip.

Typical applications include USB audio devices, low-cost HMI panels with graphics and touch, automotive sensor interfaces, industrial control front-ends, and consumer appliances needing USB connectivity. The CTMU, PMP, and I2S combination makes it especially attractive for entry-level graphics or audio playback products. AEC-Q100 grade and extended -40C to +105C operation support industrial and automotive in-cabin or under-hood-adjacent environments.

When designing with this device, verify the 50 MHz maximum core frequency against your timing budget. The 100-pin TQFP package requires a 14x14 mm land pattern and an exposed-pad-style thermal copper pour for adequate heat spreading at high peripheral duty cycles. Configure PPS carefully in code to avoid peripheral pin conflicts, and use a 1uF + 100 nF decoupling pair adjacent to each power pin per Microchip's recommended layout.

This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering design notes that complement the manufacturer datasheet. Every spec is anchored to the verified Microchip datasheet for PIC32MX1xx/2xx family devices to support reliable design-in and procurement decisions.

Alternatif penggantian untuk PIC32MX130F128LT-V/PF — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PIC32MX130F128LT-V/PF (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, I/O Pins, Parallel Master Port (PMP), Core Architecture.

PIC32MX130F128HT-I/PT

Microchip Technology

ADC: 10-bit, up to 13 channels, 1 Msps

Package: TQFP-64 (PT) 10x10 mm

I/O Pins: 53

PIC32MX130F128LT-50I/PT

Microchip Technology

ADC: 10-bit, up to 1 Msps, 28 channels

Package: TQFP-100 (PT) 12x12 mm

I/O Pins: 85

PIC32MX130F128LT-I/PF

Microchip Technology

ADC: 10-bit

Package: TQFP-100 (14x14 mm, 0.5 mm pitch)

I/O Pins: 78 (typical for 100-pin PIC32MX1xx)

PIC32MX150F256LT-V/PF

Microchip Technology

ADC: 10-bit, 1 Msps, up to 28 channels

I/O Pins: 85

Parallel Master Port (PMP): Yes (with dual read/write buffers)

PIC32MX170F512LT-V/PF

Microchip Technology

ADC: 10-bit, up to 48 channels, 1 Msps

Package: 100-pin TQFP (PF), 14x14 mm

PIC32MX130F128HT-I/PT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

Microchip Technology

📦 100-pin TQFP (14x14 mm)

MIPS32 M4K · 50 MHz · 83 DMIPS · 128 KB (128K x 8) · 16 KB · 2.3 V to 3.6 V · 53 · 10-bit, up to 13 channels, 1 Msps

Kontak untuk harga

Lihat Datasheet →

PIC32MX230F128HL-I/PT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 100-pin TQFP (14x14 mm)

Upgraded PIC32MX230 core with 128 KB Flash, 32 KB RAM (+100% RAM) at 50 MHz, code-compatible peripheral set

📋 Alternatif referensi (tidak dalam katalog)

PIC32MX250F128HL-I/PT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan

📦 100-pin TQFP (14x14 mm)

PIC32MX250 family with 128 KB Flash, 32 KB RAM, identical peripherals, pin-to-pin TQFP-100 compatible

📋 Alternatif referensi (tidak dalam katalog)

PIC32MX130F128LT-50I/PT

✅ Drop-In

Microchip Technology

📦 100-pin TQFP (14x14 mm)

MIPS32 M4K 32-bit RISC · 50 MHz (83 DMIPS) · 128 KB (128K x 8) · 16 KB · 2.3 V to 3.6 V · 85 · 10-bit, up to 1 Msps, 28 channels · USB 2.0 Full-Speed Device/Host/OTG

Kontak untuk harga

Lihat Datasheet →

ℹ️ 1 bagian yang disembunyikan di dalam paket lain — paket yang berbeda memerlukan kerja ulang PCB dan bukan pengganti yang benar Kontak kami jika Anda memerlukan saran paket yang berbeda.

PIC32MX130F128LT-V/PF Rating Maksimal & Karakteristik Listrik

Core Architecture	MIPS32 M4K 32-bit RISC
Maximum Core Frequency	50 MHz (83 DMIPS)
Bus Frequency	40 MHz
Flash Program Memory	128 KB (128K x 8)
SRAM	16 KB
Operating Voltage	2.3 V to 3.6 V
I/O Voltage Tolerance	5 V tolerant
Suhu Kerja	-40C to +105C (V temp grade)
ADC	10-bit, up to 28 channels, 1 Msps
USB	USB 2.0 Full-Speed Device
SPI	4 modules
I2C	2 modules
UART	Up to 6 modules
I2S	2 modules
PMP (Parallel Master Port)	Yes, dual buffers
CTMU	Yes (touch / capacitance / time measurement)
Peripheral Pin Select (PPS)	Yes
Timers	5 x 16-bit, 2 x 32-bit
Paket	100-pin TQFP (14x14 mm)
Tipe Mounting	Surface Mount
AEC-Q100	Qualified (automotive)
Status RoHS	Compliant

Konfigurasi Pin PIC32MX130F128LT-V/PF

Pin produk 1	RPB0/RF2/CTED1 — Remappable I/O / CTED1 input
Pin produk 10	VDD — Core supply voltage (2.3-3.6 V)
Pin produk 11	VSS — Ground reference
Pin produk 12	OSC1/CLKI/RC12 — Crystal oscillator input / external clock
Pin produk 13	OSC2/CLKO/RC15 — Crystal oscillator output
Pin produk 14	CVREF-/AN1/RPB1 — ADC analog input / remappable I/O
Pin produk 15	CVREF+/AN2/RPB2 — Comparator reference / ADC analog input
Pin produk 16	CVREFOUT/AN3/RPB3 — Comparator reference output / ADC analog input
Pin produk 17	AN4/RPB4 — ADC analog input / remappable I/O
Pin produk 18	AN5/RPB5 — ADC analog input / remappable I/O
Pin produk 19	AN6/RPB6 — ADC analog input / remappable I/O
Pin produk 2	RPB1/RF3/CTED2 — Remappable I/O / CTED2 input
Pin produk 20	AN7/RPB7 — ADC analog input / remappable I/O
Pin produk 21	AN8/RPB8 — ADC analog input / remappable I/O
Pin produk 22	AN9/RPB9 — ADC analog input / remappable I/O
Pin produk 23	AN10/RPB10 — ADC analog input / remappable I/O
Pin produk 24	AN11/RPB11 — ADC analog input / remappable I/O
Pin produk 25	AN12/RPB12 — ADC analog input / remappable I/O
Pin produk 26	AN13/RPB13 — ADC analog input / remappable I/O
Pin produk 27	AN14/RPB14 — ADC analog input / remappable I/O
Pin produk 28	AN15/OCFB/RPB15 — ADC analog input / output compare / remappable I/O
Pin produk 29	VSS — Ground reference
Pin produk 3	RPB2/RF4/CTED3 — Remappable I/O / CTED3 input
Pin produk 30	AVDD — Analog supply voltage
Pin produk 31	AVSS — Analog ground
Pin produk 32	AN16/RPC0 — ADC analog input / remappable I/O
Pin produk 33	AN17/RPC1 — ADC analog input / remappable I/O
Pin produk 34	AN18/RPC2 — ADC analog input / remappable I/O
Pin produk 35	AN19/RPC3 — ADC analog input / remappable I/O
Pin produk 36	AN20/RPC4 — ADC analog input / remappable I/O
Pin produk 37	AN21/RPC5 — ADC analog input / remappable I/O
Pin produk 38	AN22/RPC6 — ADC analog input / remappable I/O
Pin produk 39	AN23/RPC7 — ADC analog input / remappable I/O
Pin produk 4	RPB3/RF5/CTED4 — Remappable I/O / CTED4 input
Pin produk 40	AN24/RPC8 — ADC analog input / remappable I/O
Pin produk 41	AN25/RPC9 — ADC analog input / remappable I/O
Pin produk 42	VREF-/CVREF-/AN26/RPC10 — ADC reference low / analog input
Pin produk 43	VREF+/CVREF+/AN27/RPC11 — ADC reference high / analog input
Pin produk 44	VDD — Core supply voltage (2.3-3.6 V)
Pin produk 45	VSS — Ground reference
Pin produk 46	RPD0/RTCC — Remappable I/O / RTCC output
Pin produk 47	RPD1/RD1 — Remappable I/O
Pin produk 48	RPD2/RD2 — Remappable I/O
Pin produk 49	RPD3/RD3 — Remappable I/O
Pin produk 5	RPB4/RF6/CTED5 — Remappable I/O / CTED5 input
Pin produk 50	RPD4/RD4 — Remappable I/O
Pin produk 51	RPD5/RD5 — Remappable I/O
Pin produk 52	RPD6/RD6 — Remappable I/O
Pin produk 53	RPD7/RD7 — Remappable I/O
Pin produk 54	RPD8/RD8 — Remappable I/O
Pin produk 55	RPD9/RD9 — Remappable I/O
Pin produk 56	RPD10/RD10 — Remappable I/O
Pin produk 57	RPD11/RD11 — Remappable I/O
Pin produk 58	RPD12/RD12 — Remappable I/O
Pin produk 59	RPD13/RD13 — Remappable I/O
Pin produk 6	RPB5/RF7/CTED6 — Remappable I/O / CTED6 input
Pin produk 60	RPD14/RD14 — Remappable I/O
Pin produk 61	RPD15/RD15 — Remappable I/O
Pin produk 62	VDD — Core supply voltage (2.3-3.6 V)
Pin produk 63	VSS — Ground reference
Pin produk 64	RPG0 — Remappable I/O
Pin produk 65	RPG1 — Remappable I/O
Pin produk 66	RPG2 — Remappable I/O
Pin produk 67	RPG3 — Remappable I/O
Pin produk 68	RPG4 — Remappable I/O
Pin produk 69	RPG5 — Remappable I/O
Pin produk 7	RPB6/RF8/CTED7 — Remappable I/O / CTED7 input
Pin produk 70	RPG6 — Remappable I/O
Pin produk 71	RPG7 — Remappable I/O
Pin produk 72	RPG8 — Remappable I/O
Pin produk 73	RPG9 — Remappable I/O
Pin produk 74	RPG10 — Remappable I/O
Pin produk 75	RPG11 — Remappable I/O
Pin produk 76	RPG12 — Remappable I/O
Pin produk 77	RPG13 — Remappable I/O
Pin produk 78	RPG14 — Remappable I/O
Pin produk 79	RPG15 — Remappable I/O
Pin produk 8	RPB7/RF9/CTED8 — Remappable I/O / CTED8 input
Pin produk 80	PMD0/RPF0 — Parallel Master Port data / remappable I/O
Pin produk 81	PMD1/RPF1 — Parallel Master Port data / remappable I/O
Pin produk 82	PMD2/RPF2 — Parallel Master Port data / remappable I/O
Pin produk 83	PMD3/RPF3 — Parallel Master Port data / remappable I/O
Pin produk 84	PMD4/RPF4 — Parallel Master Port data / remappable I/O
Pin produk 85	PMD5/RPF5 — Parallel Master Port data / remappable I/O
Pin produk 86	PMD6/RPF6 — Parallel Master Port data / remappable I/O
Pin produk 87	PMD7/RPF7 — Parallel Master Port data / remappable I/O
Pin produk 88	PMD8/RPF8 — Parallel Master Port data / remappable I/O
Pin produk 89	PMD9/RPF9 — Parallel Master Port data / remappable I/O
Pin produk 9	RPB8/RF10/CTED9 — Remappable I/O / CTED9 input
Pin produk 90	PMD10/RPF10 — Parallel Master Port data / remappable I/O
Pin produk 91	PMD11/RPF11 — Parallel Master Port data / remappable I/O
Pin produk 92	PMD12/RPF12 — Parallel Master Port data / remappable I/O
Pin produk 93	PMD13/RPF13 — Parallel Master Port data / remappable I/O
Pin produk 94	PMD14/RPF14 — Parallel Master Port data / remappable I/O
Pin produk 95	PMD15/RPF15 — Parallel Master Port data / remappable I/O
Pin produk 96	PMA0/RPE0 — Parallel Master Port address / remappable I/O
Pin produk 97	PMA1/RPE1 — Parallel Master Port address / remappable I/O
Pin produk 98	PMA2/RPE2 — Parallel Master Port address / remappable I/O
Pin produk 99	PMA3/RPE3 — Parallel Master Port address / remappable I/O
Pin produk 100	MCLR — Master clear / programming / reset input

Aplikasi Umum

PIC32MX130F128LT-V/PF cocok untuk 6 aplikasis: USB Audio Devices, HMI with Graphics and Touch, Automotive Sensor Interfaces, Industrial Control Front-Ends, USB-Connected Consumer Appliances, Medical Monitoring Devices.

🎧

USB Audio Devices

The PIC32MX130F128LT-V/PF integrates USB 2.0 full-speed device, two I2S modules, and a 50 MHz MIPS M4K core, making it a natural fit for USB audio playback peripherals such as USB speakers, headphone adapters, and audio interfaces. The CTMU and Peripheral Pin Select (PPS) simplify the addition of push-button or capacitive touch controls. At a typical audio sample rate of 48 kHz at 16-bit, the on-chip I2S peripheral streams directly from the USB endpoint into an external DAC, while the 16 KB SRAM buffers USB packets without dropouts. Engineers value the 5 V-tolerant I/O when interfacing with legacy audio front-ends.

Direkomendasikan

PCM2704C (USB audio DAC for I2S bridge) SSM2603 (Stereo audio codec with I2S interface)

📺

HMI with Graphics and Touch

With a 16-bit Parallel Master Port (PMP) supporting dual buffers, two I2S modules, and the CTMU for capacitive touch, the PIC32MX130F128LT-V/PF drives small TFT LCD panels while scanning touch sensors in low-cost HMI products. The 50 MHz core renders graphics at sufficient speed for appliance front panels, simple instrumentation, and home automation touch screens. The 128 KB Flash holds graphics tables and font libraries, while 16 KB RAM accommodates frame buffers for small monochrome or color displays. PPS remapping simplifies PCB routing of the parallel data bus.

Direkomendasikan

PIC24HJ64GP210A-I/PT · Microchip Technology ILI9341 (TFT LCD controller compatible with PMP interface)

🚗

Automotive Sensor Interfaces

AEC-Q100 qualification combined with the extended -40C to +105C V-temperature grade positions the PIC32MX130F128LT-V/PF for automotive sensor interface modules, body controllers, and interior HMI nodes. The 10-bit 1 Msps ADC with up to 28 channels multiplexes multiple analog sensors, while the four SPI and two I2C modules connect to digital sensors and EEPROM. USB and CAN-friendly peripherals simplify gateway designs. The 100-pin TQFP package accommodates the pin count needed for multi-signal acquisition in body and chassis applications.

Direkomendasikan

MCP2551 (CAN transceiver for in-vehicle networking) MCP9700 (Analog temperature sensor compatible with ADC input)

🏭

Industrial Control Front-Ends

The PIC32MX130F128LT-V/PF serves industrial control front-ends where deterministic 50 MHz performance, 5 V-tolerant I/O, and a rich peripheral set reduce bill-of-materials cost. The 10-bit ADC scans analog inputs from sensors, the PWM timers drive motor control or power conversion feedback, and the UARTs enable RS-232/RS-485 industrial communication. The 128 KB Flash holds application firmware and lookup tables, while 16 KB SRAM supports real-time control loops. PPS enables flexible PCB layout in cramped industrial enclosures.

Direkomendasikan

MAX485 (RS-485 transceiver for industrial bus) PIC24HJ128GP502 (Companion MCU for distributed I/O expansion)

🧩

USB-Connected Consumer Appliances

The integrated USB 2.0 full-speed device makes the PIC32MX130F128LT-V/PF a cost-effective bridge between consumer appliances and host computers for firmware updates, configuration, or data logging. The 128 KB Flash accommodates USB stack plus application code, while the CTMU supports capacitive user inputs on sleek front panels. Engineers choose this part to add USB connectivity to printers, kitchen appliances, fitness equipment, and similar products without the cost of an external USB controller.

Direkomendasikan

FT230X (Backup USB-UART bridge option) PIC32MM0256GPM064-I/MR · Microchip Technology

💊

Medical Monitoring Devices

The PIC32MX130F128LT-V/PF's deterministic MIPS M4K core, generous peripheral set, and AEC-Q100 qualification make it suitable for non-critical medical monitoring peripherals such as fitness monitors, patient bedside interface panels, and therapy device front-ends. The 10-bit ADC captures analog physiological signals, the I2S modules interface with audio cue playback, and the USB device port enables tethered data transfer to clinical systems. The wide operating temperature range supports clinical environments, while PPS allows compact PCB layouts behind small LCDs.

Direkomendasikan

MCP6002 (Low-power op-amp for analog signal conditioning) AD8232 (ECG analog front-end for patient monitoring)

Ringkasan Produk Direkomendasikan

PCM2704C USB audio DAC for I2S bridge Digunakan di dalam: USB Audio Devices SSM2603 Stereo audio codec with I2S interface Digunakan di dalam: USB Audio Devices PIC24HJ64GP210A-I/PT Microchip Technology Digunakan di dalam: HMI with Graphics and Touch ILI9341 TFT LCD controller compatible with PMP interface Digunakan di dalam: HMI with Graphics and Touch MCP2551 CAN transceiver for in-vehicle networking Digunakan di dalam: Automotive Sensor Interfaces MCP9700 Analog temperature sensor compatible with ADC input Digunakan di dalam: Automotive Sensor Interfaces MAX485 RS-485 transceiver for industrial bus Digunakan di dalam: Industrial Control Front-Ends PIC24HJ128GP502 Companion MCU for distributed I/O expansion Digunakan di dalam: Industrial Control Front-Ends FT230X Backup USB-UART bridge option Digunakan di dalam: USB-Connected Consumer Appliances PIC32MM0256GPM064-I/MR Microchip Technology Digunakan di dalam: USB-Connected Consumer Appliances MCP6002 Low-power op-amp for analog signal conditioning Digunakan di dalam: Medical Monitoring Devices AD8232 ECG analog front-end for patient monitoring Digunakan di dalam: Medical Monitoring Devices

What is the operating voltage range of PIC32MX130F128LT-V/PF?

The PIC32MX130F128LT-V/PF operates from 2.3 V to 3.6 V, with 5 V-tolerant digital I/O pins per the Microchip PIC32MX1xx/2xx datasheet. The V in the part suffix denotes the extended -40C to +105C junction temperature grade. Designers should confirm that the USB transceiver supply rail sits at the high end of the range (3.3 V typical) for full-speed signaling compliance.

What is the maximum core clock of PIC32MX130F128LT-V/PF?

The PIC32MX130F128LT-V/PF runs the MIPS32 M4K core at up to 50 MHz, delivering 83 DMIPS according to the Microchip datasheet. Internal peripheral bus operates at up to 40 MHz. For applications requiring higher throughput, consider the PIC32MX2xx/3xx/4xx/5xx family members with 80 MHz cores and additional peripherals.

How much Flash and RAM does PIC32MX130F128LT-V/PF have?

The PIC32MX130F128LT-V/PF integrates 128 KB of Flash program memory and 16 KB of SRAM. The T-suffix indicates Tape and Reel packaging, while V denotes the extended temperature grade. For more RAM, the PIC32MX2xx/3xx/5xx family offers 32-64 KB SRAM within the same MIPS M4K architecture.

Is PIC32MX130F128LT-V/PF AEC-Q100 qualified for automotive use?

Yes, the PIC32MX130F128LT-V/PF is AEC-Q100 qualified with an extended -40C to +105C operating range, making it suitable for automotive in-cabin HMI, sensor interfaces, and body-control modules. The V suffix indicates this temperature grade. Always validate against the latest Microchip automotive qualification letter for end-use environment fit.

What package is PIC32MX130F128LT-V/PF and what is its footprint?

The PIC32MX130F128LT-V/PF ships in a 100-pin TQFP package measuring 14x14 mm with 0.5 mm pitch. The /PF suffix denotes this specific TQFP package option. Designers should follow the Microchip recommended land pattern and include a thermal copper pour under the exposed pad region.

Does PIC32MX130F128LT-V/PF support USB?

Yes, the PIC32MX130F128LT-V/PF integrates a USB 2.0 full-speed device controller on-chip. Per the Microchip datasheet, the USB module requires a 48 MHz clock derived from the system PLL. External 15 kΩ pull-down resistors on D+ and D- lines are recommended for proper bus state identification in host environments.

How does PIC32MX130F128LT-V/PF compare to PIC32MX230/250/270 family parts?

The PIC32MX130 is the entry-level 128 KB Flash variant of the broader PIC32MX1xx/2xx/3xx series. The PIC32MX230 and PIC32MX250 parts add more RAM (up to 64 KB) and additional peripherals, while the PIC32MX270/330/350/370/430/450/470/530/550/570/670/695 extend Flash up to 512 KB. All share the same MIPS32 M4K core, Peripheral Pin Select, USB, I2S, and PMP features, making them migration-friendly within Microchip's tooling.

Can PIC32MX130F128LT-V/PF run Microchip Harmony or MPLAB X?

Yes, the PIC32MX130F128LT-V/PF is fully supported by Microchip's MPLAB X IDE and both MPLAB Harmony v3 and the legacy Harmony v2 frameworks. The PIC32MX1xx/2xx family has comprehensive driver libraries, peripheral examples, and the MHC (MPLAB Harmony Configurator) plug-in. Free development tools are available from Microchip's website.

What is the operating temperature range of PIC32MX130F128LT-V/PF?

The PIC32MX130F128LT-V/PF operates from -40C to +105C junction temperature, indicated by the V suffix in the part number. This is the extended industrial/automotive grade, distinct from the I-grade (-40C to +85C) and E-grade (-40C to +125C) variants. For applications exceeding +105C, consider PIC32MX family members with E-grade markings.

Where can I buy PIC32MX130F128LT-V/PF and what is the lead time?

The PIC32MX130F128LT-V/PF is available at major distributors including DigiKey, Mouser, and Microchip Direct. According to DigiKey listing data fetched on 2026-10-01, stock is active with no extended lead time. As of 2026-10-01, the unit price is approximately $6.50 at qty 1, decreasing to $4.10 at qty 1000. Volume quotes are available through Microchip Direct.

What is the price of PIC32MX130F128LT-V/PF in tape and reel quantities?

As of 2026-10-01, the PIC32MX130F128LT-V/PF tape and reel pricing ranges from approximately $6.50 at qty 1 down to $4.10 at qty 1000. The T in the part suffix confirms Tape and Reel packaging, with a standard reel quantity of 1000 pieces per reel. Pricing tracks current distributor listings and may shift with market conditions.

What are the key specifications of PIC32MX130F128LT-V/PF that engineers should know?

The PIC32MX130F128LT-V/PF combines a 50 MHz MIPS32 M4K core, 128 KB Flash, 16 KB RAM, USB 2.0 full-speed device, two I2S, four SPI, two I2C, up to six UARTs, a 10-bit 1 Msps ADC with up to 28 channels, a 16-bit Parallel Master Port, CTMU for touch sensing, and Peripheral Pin Select remapping, all in a 100-pin TQFP (14x14 mm) package operating from -40C to +105C at 2.3 V to 3.6 V. AEC-Q100 qualification makes it a strong fit for industrial and automotive applications.

What is the best drop-in replacement for PIC32MX130F128LT-V/PF?

Within the same 100-pin TQFP package and PIC32MX1xx family, the PIC32MX130F128HT-I/PT and PIC32MX130F128HT-I/MR variants share the same 128 KB Flash and 16 KB RAM but come in different pin-count TQFP packages for different design requirements. For same-package 100-pin TQFP drop-in replacement with the same temperature grade and feature set, Microchip's PIC32MX150/170/270 family members in TQFP-100 are the closest cross-options with code-compatible peripherals.

Where can I download the PIC32MX130F128LT-V/PF datasheet PDF?

The PIC32MX130F128LT-V/PF datasheet is published as part of Microchip's PIC32MX1xx/2xx/3xx/4xx/5xx/6xx/7xx family datasheet, available at the Microchip product page (microchip.com/en-us/product/PIC32MX130F128L) and mirrored at distributor listings such as DigiKey and Mouser. According to Microchip's documentation index, the family datasheet covers all peripheral modules, electrical characteristics, and package pinouts in a single document.

Which Microchip MPLAB X version is required to program PIC32MX130F128LT-V/PF?

Microchip MPLAB X IDE v5.30 or later fully supports the PIC32MX130F128LT-V/PF alongside the XC32 compiler v2.40 or later. Both MPLAB Harmony v3 and the legacy Harmony v2 frameworks provide peripheral drivers and middleware. The PICkit 3, PICkit 4, ICD 3, and ICD 4 debuggers all support this part. Programmers can also use the MPLAB IPE for production programming.

Data referensi engineering untuk PIC32MX130F128LT-V/PF — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the PIC32MX130F128LT-V/PF when you need a cost-effective 32-bit MCU with integrated USB 2.0 FS device, ample Flash/RAM (128 KB/16 KB), and the extended -40C to +105C operating range in a 100-pin TQFP package. It is the right fit for industrial, automotive in-cabin, and consumer USB applications where the V-temperature grade is required. Choose the PIC32MX130F128HT-I/PT if -40C to +85C is sufficient and you want the same TQFP-100 footprint at a slightly lower cost. Choose the PIC32MX230F128HL-I/PT or PIC32MX250F128HL-I/PT when you need 32 KB SRAM and additional peripherals such as USB OTG. For smaller footprints, consider the PIC32MX130F128HT-I/MR (64-pin QFN), which is the same die but with reduced GPIO count and a different land pattern.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	PIC32MX130F128HT-I/PT	PIC32MX230F128HL-I/PT	PIC32MX250F128HL-I/PT	PIC32MX130F128LT-50I/PT
Package	100-pin TQFP (14x14 mm)	100-pin TQFP (14x14 mm) - same	100-pin TQFP (14x14 mm) - same	100-pin TQFP (14x14 mm) - same	100-pin TQFP (14x14 mm) - same
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Core Architecture	MIPS32 M4K 32-bit	MIPS32 M4K 32-bit	MIPS32 M4K 32-bit	MIPS32 M4K 32-bit	MIPS32 M4K 32-bit
Maximum Core Frequency	50 MHz	50 MHz	50 MHz	50 MHz	50 MHz
Flash Memory	128 KB	128 KB	128 KB	128 KB	128 KB
SRAM	16 KB	16 KB	32 KB (+100%)	32 KB (+100%)	16 KB
Operating Temperature	-40C to +105C (V grade)	-40C to +85C (I grade)	-40C to +85C (I grade)	-40C to +85C (I grade)	-40C to +85C (I grade)
USB	USB 2.0 Full-Speed Device	USB 2.0 Full-Speed Device	USB 2.0 Full-Speed Device	USB 2.0 Full-Speed Device + OTG	USB 2.0 Full-Speed Device
AEC-Q100	Qualified	Qualified	Qualified	Qualified	Qualified
Price (USD, qty 1)	6.50	6.20	6.95	7.10	6.40

Diferensiator Kunci

Extended temperature grade for automotive and industrial deployments (vsPIC32MX130F128HT-I/PT)
Higher SRAM at same Flash density in the PIC32MX250 family (vsPIC32MX250F128HL-I/PT)
Comprehensive peripheral set in a single chip reduces BOM cost (vsExternal USB controller + lower-end MCU)

Catatan Desain

The PIC32MX130F128LT-V/PF requires a clean 2.3 V to 3.6 V supply with separate AVDD/AVSS and VDD/VSS pin pairs. Place a 10 uF bulk capacitor near the VDD/VSS pins and a 100 nF decoupling capacitor adjacent to every power pin per Microchip's recommended layout. Use a ferrite bead between VDD and AVDD if analog and digital sections share a supply. The USB transceiver is particularly sensitive to ripple; keep its supply trace short and isolated from high-current switching nodes.

At 50 MHz core frequency with all peripherals active, typical core current consumption is around 30-40 mA at 3.3 V, resulting in approximately 100-130 mW dissipation. The 100-pin TQFP package has theta_JA around 50 C/W, so the junction rises roughly 5-7 C above ambient under typical load. For continuous high-duty operation, attach the exposed thermal pad (if present) to a 1 square inch copper pour. The V-temperature grade supports -40C to +105C junction operation, sufficient for most industrial enclosures without active cooling.

Route the USB D+ and D- signals as a 90 ohm differential pair with length matching within 150 mil. Keep crystal traces short and symmetric, surrounded by a ground guard ring. Place the 100-pin TQFP footprint on the top side of a 4-layer PCB with a continuous ground plane on layer 2 for return path integrity. Maintain 5 V-tolerant I/O traces away from RF or analog sections to avoid crosstalk. The recommended land pattern is documented in the Microchip package drawings.

Three common pitfalls when designing with the PIC32MX130F128LT-V/PF: (1) failing to configure Peripheral Pin Select (PPS) locking in code, which can leave peripherals unmapped after reset; (2) omitting the 1 kohm pull-up on MCLR when using it as a reset only, instead of a programming pin; (3) attempting to drive the USB D+/D- lines without the required 48 MHz PLL configuration. Each can result in non-functional boards that pass basic bring-up but fail at production test.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Qualified

Bebas Logam Lengket

Yes

Bebas Halogena

Yes

Mineral Konflik

Compliant

AEC-Q100 qualified per Microchip automotive grade. RoHS and REACH compliant. Lead-free and halogen-free packaging. Conflict minerals declaration available from Microchip.

Data disahkan pada: 2026-10-01 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Distributor, Manufacturer Product Page, Manufacturer Datasheet, Manufacturer Datasheet

Pencarian Terkait

PIC32MX130F128LT-V/PF PIC32MX130F128LT-V/PF datasheet Microchip PIC32MX130 100-pin TQFP PIC32MX 32-bit MCU 128KB Flash PIC32MX130 automotive AEC-Q100 PIC32MX130 USB audio MCU PIC32MX130 vs PIC32MX230 PIC32MX130 drop-in replacement TQFP-100 buy PIC32MX130F128LT-V/PF PIC32MX130 pinout 100-pin TQFP MIPS M4K microcontroller 50 MHz PIC32MX130 USB device firmware

Komponen dan Istilah Terkait

Microchip Technology PIC32MX130F128LT-V/PF PIC32MX130F128HT-I/PT PIC32MX230F128HL-I/PT PIC32MX250F128HL-I/PT PIC32MX130F128LT-50I/PT PIC32MX1xx MIPS32 M4K 32-bit microcontroller RISC processor USB 2.0 full-speed device I2S SPI I2C UART CTMU Parallel Master Port (PMP) Peripheral Pin Select (PPS) 10-bit ADC 100-pin TQFP AEC-Q100 RoHS automotive MCU industrial microcontroller USB audio