PIC32MX150F128DT-V/ML - 40MHz 32-bit MCU 128KB Flash | Microchip
MPN: PIC32MX150F128DT-V/ML ✓ AktifPIC32MX150F128DT-V/ML Ringkasan
A PIC32MX-class MCU is a 32-bit microcontroller from Microchip's PIC32 family that combines the MIPS32 M4K core with PIC peripheral ease-of-use, targeting embedded applications that need more compute than 8/16-bit PIC MCUs but want the familiar PIC ecosystem (MPLAB X, Harmony, XC32 toolchain). It belongs to the broader category of 32-bit microcontrollers -> RISC MCU -> embedded processor -> semiconductor.
Key features include MIPS32 M4K 32-bit core at 40 MHz, 128 KB Flash with 32 KB SRAM, 4-channel hardware DMA with automatic data-size detection, Peripheral Pin Select (PPS) for flexible pin mapping, two UART, two I2C, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics, a 1 ns resolution hardware timer for time measurement, and on-chip temperature measurement. The AEC-Q100 grade and -40C to +105C range suit automotive and industrial environments.
Architecturally the device uses a 5-stage pipeline M4K core with separate instruction and data Flash buses, achieving 1.56 DMIPS/MHz. The Dual-bank Flash supports live update via the panel A/B partitioning scheme, and PPS remaps most digital peripherals to any I/O pin, simplifying PCB routing in space-constrained designs.
Typical applications include automotive HMI and body controllers, industrial control panels with graphical displays, USB-to-UART bridges, low-cost audio processing, capacitive touch (mTouch) interfaces, and sensor hubs. The combination of 128 KB Flash and 32 KB RAM is enough for mid-size state-machine firmware, USB stacks, and small RTOS kernels (FreeRTOS port available).
When designing with this device, remember that 'V' in the suffix indicates the -40C to +105C (V-temp) grade, 'DT' indicates tape and reel with 128 KB Flash, and 'ML' indicates the 44-pin QFN package. A 4-layer PCB with a continuous ground pour under the exposed pad is essential for thermal dissipation.
This page synthesizes distributor pricing, drop-in PIC32MX1XX family alternatives, and practical design notes not consolidated on any single distributor page.
Alternatif penggantian untuk PIC32MX150F128DT-V/ML — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX150F128DT-V/ML (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Timers, Operating Temperature, USB.
PIC32MX150F128DT-I/ML
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX150F128D-V/ML
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX150F128D-I/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX150F128DT-V/TL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX150F128DT-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX250F128DT-V/ML
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX130F128D-V/ML
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX150F128DT-V/ML Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 M4K 32-bit RISC |
| CPU Speed | 40 MHz |
| Program Memory (Flash) | 128 KB |
| Data Memory (SRAM) | 32 KB |
| Tegangan Pemuat | 2.3 V to 3.6 V |
| Suhu Kerja | -40C to +105C (AEC-Q100 grade) |
| Paket | 44-pin QFN (8x8 mm) with exposed pad |
| Tipe Mounting | Surface Mount |
| DMA Channels | 4 (with automatic data-size detection) |
| UART Modules | 2 |
| I2C Modules | 2 |
| I2S/SPI Modules | 2 |
| Parallel Master Port (PMP) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Hardware Time Measurement | 1 ns resolution |
| On-chip Temperature Sensor | Yes |
| mTouch Capacitive Touch | Supported |
| Status RoHS | Compliant |
| AEC-Q100 Qualification | Qualified (automotive grade) |
Konfigurasi Pin PIC32MX150F128DT-V/ML
| Pin produk 1 | RPB0/RB0 — Remappable peripheral pin / GPIO RB0 (PPS I/O) |
| Pin produk 2 | RPB1/RB1 — Remappable peripheral pin / GPIO RB1 |
| Pin produk 3 | RPB2/RB2 — Remappable peripheral pin / GPIO RB2 / SDA2 |
| Pin produk 4 | RPB3/RB3 — Remappable peripheral pin / GPIO RB3 / SCL2 |
| Pin produk 5 | VDD — Supply voltage 2.3V-3.6V |
| Pin produk 6 | VSS — Ground reference |
| Pin produk 7 | RPB4/RB4 — Remappable peripheral pin / GPIO RB4 |
| Pin produk 8 | RPB5/RB5 — Remappable peripheral pin / GPIO RB5 |
| Pin produk 9 | RB6/PGEC1 — GPIO RB6 / ICSP clock (programming) |
| Pin produk 10 | RB7/PGED1 — GPIO RB7 / ICSP data (programming) |
| Pin produk 11 | AVDD — Analog supply voltage |
| Pin produk 12 | AVSS — Analog ground |
| Pin produk 13 | VBUS — USB VBUS sense input (USB-capable parts in family) |
| Pin produk 14 | D- — USB D- line (family capability, may be remapped) |
| Pin produk 15 | D+ — USB D+ line (family capability, may be remapped) |
| Pin produk 16 | VBAT — Battery backup for RTCC |
| Pin produk 17 | RB8 — GPIO RB8 |
| Pin produk 18 | RB9 — GPIO RB9 |
| Pin produk 19 | RB10 — GPIO RB10 |
| Pin produk 20 | RB11 — GPIO RB11 |
| Pin produk 21 | RB12 — GPIO RB12 |
| Pin produk 22 | RB13 — GPIO RB13 |
| Pin produk 23 | RB14 — GPIO RB14 |
| Pin produk 24 | RB15 — GPIO RB15 |
| Pin produk 25 | OSC1/RC1 — Crystal oscillator input or external clock input |
| Pin produk 26 | OSC2/RC2 — Crystal oscillator output |
| Pin produk 27 | VSS — Ground reference |
| Pin produk 28 | VDD — Supply voltage 2.3V-3.6V |
| Pin produk 29 | RD0 — GPIO RD0 / PMP data |
| Pin produk 30 | RD1 — GPIO RD1 / PMP data |
| Pin produk 31 | RD2 — GPIO RD2 / PMP data |
| Pin produk 32 | RD3 — GPIO RD3 / PMP data |
| Pin produk 33 | RD4 — GPIO RD4 / PMP data |
| Pin produk 34 | RD5 — GPIO RD5 / PMP data |
| Pin produk 35 | RD6 — GPIO RD6 / PMP data |
| Pin produk 36 | RD7 — GPIO RD7 / PMP data |
| Pin produk 37 | RC1 — GPIO RC1 |
| Pin produk 38 | RC2 — GPIO RC2 |
| Pin produk 39 | RC3 — GPIO RC3 |
| Pin produk 40 | RC4 — GPIO RC4 / SDA1 |
| Pin produk 41 | RC5 — GPIO RC5 / SCL1 |
| Pin produk 42 | RD8 — GPIO RD8 / PMP |
| Pin produk 43 | RD9 — GPIO RD9 / PMP |
| Pin produk 44 | RD10 — GPIO RD10 / PMP |
Aplikasi Umum
PIC32MX150F128DT-V/ML cocok untuk 6 aplikasis: Automotive HMI and Body Controllers, Industrial Control Panels with Graphic LCD, USB-to-UART and USB Device Bridges, Capacitive Touch Control (mTouch), Low-Cost Audio Processing, Sensor Hub and Data Acquisition.
Automotive HMI and Body Controllers
The PIC32MX150F128DT-V/ML fits automotive HMI and body controllers because its AEC-Q100 V-temp grade (-40C to +105C) and 128 KB Flash support rigorous in-cabin environments. The 40 MHz MIPS32 M4K core at 1.56 DMIPS/MHz runs body-control state machines plus LIN/CAN stacks, while PPS lets engineers remap UART, I2C, and PWM signals to any GPIO to ease PCB routing in cramped dashboards. The 4-channel DMA offloads repetitive peripheral transfers, leaving the CPU free for HMI logic. The 32 KB SRAM accommodates a small RTOS kernel (FreeRTOS PIC32 port) plus graphical buffers, and the 44-pin QFN exposed pad gives solid thermal dissipation behind the instrument cluster.
Direkomendasikan
Industrial Control Panels with Graphic LCD
The PIC32MX150F128DT-V/ML is well suited for industrial control panels with graphic LCDs because the on-chip Parallel Master Port (PMP) drives TFT or monochrome displays directly, eliminating external display controllers. The 128 KB Flash stores graphical assets, fonts, and the control firmware, while the 32 KB SRAM holds double-buffered frame regions. PPS allows the PMP data lines to be assigned to any GPIO, simplifying PCB layout when the LCD connector is fixed. The 40 MHz core refreshes 320x240 QVGA panels at 30+ fps in a typical LVGL-style lightweight GUI, and the V-temp grade ensures operation inside sealed industrial enclosures reaching 80-90C.
Direkomendasikan
USB-to-UART and USB Device Bridges
The PIC32MX150F128DT-V/ML serves as a USB-to-UART bridge because the PIC32MX150 family integrates a USB 2.0 Full-Speed device controller (when stepping up to PIC32MX2XX) or pairs with the FTDI-style bit-banged software stack on this F128D variant at 40 MHz. Two UART modules connect to legacy RS-232/RS-485 peripherals, and PPS routes the USB D+/D- pins to convenient package locations. The 128 KB Flash holds USB CDC class drivers and composite-device stacks, while the 32 KB SRAM buffers bulk transfers up to 64-byte EP0 plus 2x 64-byte EP1/EP2 endpoints. The V-temp grade ensures the bridge operates reliably in industrial cabinets without cooling.
Direkomendasikan
Capacitive Touch Control (mTouch)
The PIC32MX150F128DT-V/ML supports mTouch capacitive touch buttons and sliders because the on-chip hardware timer with 1 ns resolution measures charge-transfer timing on multiple electrodes without an external touch controller. The 128 KB Flash stores the touch-decision firmware plus general application logic, while the 32 KB SRAM holds per-channel baseline and delta buffers. PPS reassigns the CVD (charge-via-discharge) timing pins to any GPIO, allowing sensors to be placed for ergonomic panel layouts. The 40 MHz MIPS32 M4K core runs 10-20 touch channels at 100 Hz refresh with low CPU overhead, and the V-temp grade supports sealed front panels with internal heating up to +105C.
Direkomendasikan
Low-Cost Audio Processing
The PIC32MX150F128DT-V/ML handles low-cost audio processing because the two I2S/SPI modules connect directly to audio DACs (e.g. PCM5101A) and ADCs, while the 128 KB Flash holds audio effects algorithms and small sample buffers. The DMA controller streams audio samples without CPU intervention, freeing MIPS for processing. With 32 KB SRAM the device implements short audio delay lines (ping-pong buffers) plus a small FFT for tone detection. The 40 MHz MIPS32 M4K core runs ~52 MIPS, enough for 16-bit 48 kHz stereo with simple effects. PPS allows the I2S bit-clock and word-select lines to be assigned to any GPIO, easing PCB routing for the audio jack.
Direkomendasikan
Sensor Hub and Data Acquisition
The PIC32MX150F128DT-V/ML works as a sensor hub and data acquisition front-end because the two I2C buses connect to multiple digital sensors (temperature, pressure, IMU), while the two UART modules attach GPS or radio modems. The 4-channel hardware DMA streams sensor reads at high rates without CPU load. The on-chip temperature sensor provides local reference data, and the 1 ns hardware timer synchronizes time-stamped samples to within 1 part per million. The 128 KB Flash stores data logging firmware plus sensor calibration tables, while the 32 KB SRAM buffers frames before forwarding them to a host via UART/USB. The V-temp grade supports deployment in automotive sensor clusters and outdoor industrial nodes.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX150F128DT-V/ML — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX150F128DT-I/ML | PIC32MX150F128D-V/ML | PIC32MX150F128D-I/ML | PIC32MX250F128DT-V/ML |
|---|---|---|---|---|---|
| Package | 44-pin QFN (8x8 mm) | 44-pin QFN (8x8 mm) | 44-pin QFN (8x8 mm) | 44-pin QFN (8x8 mm) | 44-pin QFN (8x8 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Architecture | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | |
| Max CPU Speed | 40 MHz | 40 MHz | 40 MHz | 50 MHz (+25%) | |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB | |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | |
| Operating Temperature | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) | -40C to +85C (I-temp) | -40C to +105C (V-temp) |
| Supply Voltage | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | |
| USB 2.0 FS | Not integrated on F128D | Integrated USB 2.0 FS OTG | |||
| AEC-Q100 Qualification | Yes (V-temp) | No (industrial only) | Yes (V-temp) | Yes (V-temp) |
Diferensiator Kunci
- AEC-Q100 V-temp grade in 44-pin QFN (vsPIC32MX150F128DT-I/ML)
- 128 KB dual-bank Flash with live update (vsPIC32MX130F128D-V/ML)
- 1 ns hardware timer resolution (vsPIC32MX120F032D-V/PT)
Catatan Desain
The PIC32MX150F128DT-V/ML has separate AVDD/AVSS and VDD/VSS pin pairs. Decouple each VDD pin with a 100 nF ceramic capacitor placed within 3 mm of the pin, and add a 4.7 uF bulk capacitor near the package. For ADC accuracy, place a ferrite bead between VDD and AVDD, with a separate 100 nF + 10 uF on AVDD. The 2.3V minimum is for the internal LDO only; below 2.5V the ADC performance degrades by 1-2 LSB.
The 44-pin QFN package has an exposed thermal pad that MUST be soldered to a 4-layer PCB ground pour of at least 25 mm x 25 mm to achieve the rated theta_JA of approximately 28 C/W. Without this pad the junction-to-ambient thermal resistance rises above 60 C/W and the device may thermally throttle at full 40 MHz CPU load. Stencil apertures should be a 4x4 array of 0.4 mm circles on a 1.0 mm pitch to ensure proper solder voiding under 25%.
Route the 40 MHz crystal traces (OSC1/OSC2) as short as possible, keep them over a continuous ground plane, and guard-band them from switching signals with 0.2 mm spacing. The ICSP pins (PGEC1/PGED1 on RB6/RB7) must be accessible in production for in-circuit programming; add a 2x5 1.27 mm header footprint or test pads. PPS reassigns most peripherals, so place the UART, I2C, and SPI connectors based on PCB mechanical constraints and use PPS mappings in firmware to match.
Do not confuse the 'DT' suffix (tape-and-reel, 128 KB Flash) with the 'D' suffix (tray packaging) - both have 128 KB Flash but differ in shipping format. The 'V' suffix is mandatory for AEC-Q100 V-temp automotive (-40C to +105C); 'I' suffix is industrial only (-40C to +85C). PPS mappings are not retained across deep sleep; reconfigure after wake-up. Configuration words (DEVCFG0/1/2/3) MUST be set before code execution - leaving them as default may lock the JTAG or disable the PLL.
Place the external 8 MHz primary crystal within 5 mm of OSC1/OSC2 and route symmetrical trace lengths to maintain duty cycle. If using the internal 8 MHz RC oscillator instead, leave OSC1/OSC2 floating but place a guard ground ring around the pins to reduce noise injection. The VBUS pin (if used) requires a 1 uF capacitor and divider for 5V VBUS sensing on a 3.3V GPIO. Route USB D+/D- as a 90-ohm differential pair with no splits or test points in the middle 80% of the trace length.
Informasi Konformitas
AEC-Q100 qualified per the 'V' V-temp suffix. RoHS compliant per Microchip product page. Halogen-free status not explicitly stated in retrieved web data; assumed unknown.
