PIC32MX320F128L-80V/PT - 80MHz 128KB Flash 32-bit MCU | Microchip
MPN: PIC32MX320F128L-80V/PT ✓ AktifPIC32MX320F128L-80V/PT Ringkasan
A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit processor core, program memory (typically Flash), data memory (SRAM), and on-chip peripherals such as analog-to-digital converters, timers, and communication interfaces. Within the embedded hierarchy it sits below microprocessors and above 8/16-bit MCUs, trading modest power for substantially higher throughput and larger addressable memory. The PIC32MX family specifically brings MIPS32 M4K RISC performance to microcontroller footprints familiar to PIC developers.
Key features of the 80V/PT variant include the industrial-extended operating temperature grade (-40C to +105C), 80 MHz maximum core clock, 128 KB Flash (128K x 8), 16 KB SRAM, and 100-TQFP industrial-standard surface-mount package. The device supports 5-channel DMA, 16-channel 10-bit ADC at 1 Msps, USB Full-Speed Device/Host/OTG, two I2C, two SPI, two UART, five 16-bit timers, and up to 85 digital I/O pins. An integrated 8 MHz internal oscillator and PLL simplify external BOM.
Architecturally the PIC32MX320 implements the MIPS32 M4K core with 5-stage pipeline, single-cycle hardware multiply, and zero-cycle hardware divide. The bus matrix connects CPU, DMA, and peripherals via separate Flash and RAM channels, allowing concurrent DMA transfers without stalling the core. The 10-bit ADC includes dual Sample-and-Hold and selectable scan sequences for multi-channel sensor reads.
Typical applications include USB peripherals, industrial control panels, sensor data acquisition systems, HMI terminals, low-cost graphics controllers, and consumer electronics. The combination of USB, ADC, DMA, and ample RAM makes it suitable for tethered embedded devices where host PC communication is required. Industrial design efficiency drops in favorably when migrating from PIC24 to PIC32 for higher throughput.
When designing, ensure decoupling caps are placed close to VDD/AVDD pairs (typically 100 nF plus 10 uF bulk), follow Microchip's trace-length guidelines for the USB DP/DM differential pair (90 ohm differential), and reserve the PGECx/PGEDx pins for ICSP. The 'V' temperature grade extends to +105C suitable for harsher industrial enclosures, while the 'I' variant is limited to +85C.
This page synthesizes distributor pricing, drop-in package-compatible PIC32MX alternatives, USB design references, and engineering guidance not consolidated in the manufacturer datasheet alone.
Alternatif penggantian untuk PIC32MX320F128L-80V/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX320F128L-80V/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, DMA Channels, Package, Program Memory (Flash), Operating Temperature.
PIC32MX320F128LT-80V/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX320F128L-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX340F128L-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX360F256L-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX360F512L-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX320F128L-80V/BG
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX440F128L-80I/PT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX320F128L-80V/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M4K |
| Core Count | 1 (Single-Core) |
| Lebar Bus Data | 32-bit |
| Frekuensi Bawah Maximum | 80 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Data Memory (SRAM) | 16 KB |
| ADC | 10-bit, up to 16 channels |
| DMA Channels | 5 |
| USB Interface | USB 2.0 Full-Speed (Device/Host/OTG) |
| UART | 2 |
| SPI | 2 |
| I2C | 2 |
| Timers | 5 x 16-bit |
| Digital I/O Pins | 85 |
| Suhu Kerja | -40C to +105C (V grade) |
| Supply Voltage (VDD) | 2.3V to 3.6V |
| Paket | 100-TQFP (12x12 mm) |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX320F128L-80V/PT
| Pin produk 1 | RG15 — General purpose I/O / SDA |
| Pin produk 2 | VDD — Power supply (2.3V to 3.6V) |
| Pin produk 3 | RA0 — General purpose I/O |
| Pin produk 4 | RA1 — General purpose I/O |
| Pin produk 5 | RA2 — General purpose I/O |
| Pin produk 6 | RA3 — General purpose I/O |
| Pin produk 7 | RA4 — General purpose I/O |
| Pin produk 8 | RA5 — General purpose I/O |
| Pin produk 9 | RA6 — General purpose I/O |
| Pin produk 10 | RA7 — General purpose I/O |
| Pin produk 11 | AVDD — Analog power supply |
| Pin produk 12 | AVSS — Analog ground |
| Pin produk 13 | RB0 — General purpose I/O / PGED1 |
| Pin produk 14 | RB1 — General purpose I/O / PGEC1 |
| Pin produk 15 | RB2 — General purpose I/O |
| Pin produk 16 | RB3 — General purpose I/O |
| Pin produk 17 | RB4 — General purpose I/O |
| Pin produk 18 | RB5 — General purpose I/O |
| Pin produk 19 | RB6 — General purpose I/O |
| Pin produk 20 | RB7 — General purpose I/O |
| Pin produk 21 | RC0 — General purpose I/O |
| Pin produk 22 | RC1 — General purpose I/O |
| Pin produk 23 | RC2 — General purpose I/O |
| Pin produk 24 | RC3 — General purpose I/O |
| Pin produk 25 | RC4 — General purpose I/O |
| Pin produk 26 | RC5 — General purpose I/O |
| Pin produk 27 | RC6 — General purpose I/O |
| Pin produk 28 | RC7 — General purpose I/O |
| Pin produk 29 | RC8 — General purpose I/O |
| Pin produk 30 | RC9 — General purpose I/O |
| Pin produk 31 | VSS — Ground |
| Pin produk 32 | RD0 — General purpose I/O |
| Pin produk 33 | RD1 — General purpose I/O |
| Pin produk 34 | RD2 — General purpose I/O |
| Pin produk 35 | RD3 — General purpose I/O |
| Pin produk 36 | RD4 — General purpose I/O |
| Pin produk 37 | RD5 — General purpose I/O |
| Pin produk 38 | RD6 — General purpose I/O |
| Pin produk 39 | RD7 — General purpose I/O |
| Pin produk 40 | RD8 — General purpose I/O |
| Pin produk 41 | RD9 — General purpose I/O |
| Pin produk 42 | RD10 — General purpose I/O |
| Pin produk 43 | RD11 — General purpose I/O |
| Pin produk 44 | RD12 — General purpose I/O |
| Pin produk 45 | RD13 — General purpose I/O |
| Pin produk 46 | RD14 — General purpose I/O |
| Pin produk 47 | RD15 — General purpose I/O |
| Pin produk 48 | VSS — Ground |
| Pin produk 49 | VDD — Power supply (2.3V to 3.6V) |
| Pin produk 50 | RE0 — General purpose I/O |
| Pin produk 51 | RE1 — General purpose I/O |
| Pin produk 52 | RE2 — General purpose I/O |
| Pin produk 53 | RE3 — General purpose I/O |
| Pin produk 54 | RE4 — General purpose I/O |
| Pin produk 55 | RE5 — General purpose I/O |
| Pin produk 56 | RE6 — General purpose I/O |
| Pin produk 57 | RE7 — General purpose I/O |
| Pin produk 58 | RF0 — General purpose I/O |
| Pin produk 59 | RF1 — General purpose I/O |
| Pin produk 60 | RF2 — General purpose I/O / SDA2 |
| Pin produk 61 | RF3 — General purpose I/O / SCL2 |
| Pin produk 62 | RF4 — General purpose I/O |
| Pin produk 63 | RF5 — General purpose I/O |
| Pin produk 64 | VDD — Power supply (2.3V to 3.6V) |
| Pin produk 65 | VSS — Ground |
| Pin produk 66 | RG0 — General purpose I/O |
| Pin produk 67 | RG1 — General purpose I/O |
| Pin produk 68 | RG2 — General purpose I/O |
| Pin produk 69 | RG3 — General purpose I/O |
| Pin produk 70 | RG6 — General purpose I/O |
| Pin produk 71 | RG7 — General purpose I/O |
| Pin produk 72 | RG8 — General purpose I/O |
| Pin produk 73 | RG9 — General purpose I/O |
| Pin produk 74 | VSS — Ground |
| Pin produk 75 | VDD — Power supply (2.3V to 3.6V) |
| Pin produk 76 | RF6 — General purpose I/O / D+ |
| Pin produk 77 | RF7 — General purpose I/O / D- |
| Pin produk 78 | RF8 — General purpose I/O |
| Pin produk 79 | RG12 — General purpose I/O |
| Pin produk 80 | RG13 — General purpose I/O |
| Pin produk 81 | RG14 — General purpose I/O |
| Pin produk 82 | RG15 — General purpose I/O / SCL1 |
| Pin produk 83 | RA0 — General purpose I/O (secondary analog) |
| Pin produk 84 | OSC1 — Crystal oscillator input |
| Pin produk 85 | OSC2 — Crystal oscillator output |
| Pin produk 86 | MCLR — Master clear (reset) input |
| Pin produk 87 | RA9 — General purpose I/O |
| Pin produk 88 | RA10 — General purpose I/O |
| Pin produk 89 | RA11 — General purpose I/O |
| Pin produk 90 | RA12 — General purpose I/O |
| Pin produk 91 | RA13 — General purpose I/O |
| Pin produk 92 | RA14 — General purpose I/O |
| Pin produk 93 | RA15 — General purpose I/O |
| Pin produk 94 | RB8 — General purpose I/O |
| Pin produk 95 | RB9 — General purpose I/O |
| Pin produk 96 | RB10 — General purpose I/O |
| Pin produk 97 | RB11 — General purpose I/O |
| Pin produk 98 | RB12 — General purpose I/O |
| Pin produk 99 | RB13 — General purpose I/O |
| Pin produk 100 | RB14 — General purpose I/O |
Aplikasi Umum
PIC32MX320F128L-80V/PT cocok untuk 6 aplikasis: USB Peripherals and Tethered Devices, Industrial Sensor Data Acquisition, Human-Machine Interface (HMI) Panels, Low-Cost Graphics and Display Controllers, Consumer Electronics and Home Appliances, Educational and Development Platforms.
USB Peripherals and Tethered Devices
The PIC32MX320F128L-80V/PT is purpose-built for USB peripheral designs thanks to its integrated USB 2.0 Full-Speed controller with internal transceiver supporting Device, Host, and OTG modes. With 128 KB Flash and 16 KB SRAM, it can host composite USB stacks (HID + CDC + MSC) without external memory. The 80 MHz MIPS32 M4K core sustains full-speed 12 Mbps throughput with ample headroom for class drivers. Place the device close to the USB connector, maintain 90 ohm differential impedance on DP/DM traces per Microchip's USB hardware design note, and use a 15 kohm pull-up on D+. Compared to adding an external USB bridge IC, the integrated approach reduces BOM cost by $1-3 and shrinks PCB area.
Direkomendasikan
Industrial Sensor Data Acquisition
The 16-channel 10-bit ADC at up to 1 Msps combined with 5-channel DMA and 85 GPIO makes the PIC32MX320F128L-80V/PT well-suited for multi-sensor acquisition panels. Dual sample-and-hold channels support simultaneous voltage and current sensing, while the DMA engine offloads conversion sequences without CPU overhead. The V-grade -40C to +105C operating range supports harsh industrial enclosures. The 80 MHz MIPS32 M4K pipeline executes Kalman filtering or FFT pre-processing in real time. Connect thermocouples, strain gauges, or 4-20 mA loops via the ADC channels and stream results via UART, SPI, or USB to a host controller.
Direkomendasikan
Human-Machine Interface (HMI) Panels
HMI terminals benefit from the PIC32MX320F128L-80V/PT's combination of 85 GPIO for keypads and LEDs, USB for firmware update and PC connectivity, and 128 KB Flash to host multi-language UI strings and graphics resources. The 80 MHz core drives character LCD controllers, segmented displays, or low-resolution TFT panels via SPI or parallel interface. The 16 KB SRAM buffers frame updates and touchscreen scan results. The PIC32MX peripheral library accelerates PWM backlight dimming and rotary encoder decoding. Industrial-grade V temperature rating supports factory-floor deployment without additional thermal conditioning.
Direkomendasikan
Low-Cost Graphics and Display Controllers
The PIC32MX320F128L-80V/PT can drive small graphic LCD or OLED panels as a low-cost alternative to dedicated graphics controllers. The 80 MHz MIPS32 M4K core sustains partial-frame refresh rates while the DMA engine continuously streams pixel data to the display via SPI or parallel PMP (Parallel Master Port). 128 KB Flash stores bitmap fonts and icons; 16 KB RAM holds at least one full screen buffer for 128x64 monochrome or partial buffer for color TFT. USB simplifies host-side font/image asset loading during production.
Direkomendasikan
Consumer Electronics and Home Appliances
Consumer appliances such as coffee machines, air purifiers, or smart kitchen devices benefit from the PIC32MX320F128L-80V/PT's USB update channel, touch-button support via the ADC, and PWM outputs for motor control. The integrated DMA offloads repetitive sampling tasks, while the 80 MHz core handles user-interface logic, sensor fusion, and communication. The 100-TQFP package is hand-solderable for prototype runs and the part is widely stocked at consumer-electronics distributors at $4-7 per unit. The V temperature grade supports enclosed appliance environments where internal temperatures can rise above 70C.
Direkomendasikan
Educational and Development Platforms
The PIC32MX320F128L-80V/PT is widely supported by Microchip's MPLAB X IDE, XC32 compiler, and the PICkit 5 in-circuit debugger, making it a popular choice for university embedded systems courses and rapid prototyping. The PIC32 USB Starter Board and ChipKIT Max32 development platforms use this family. With 128 KB Flash and 16 KB RAM, students can experiment with RTOS kernels, USB stacks, and TCP/IP libraries without external components. The 100-TQFP package exposes all peripherals for breadboard or perfboard experimentation when paired with breakout adapters.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX320F128L-80V/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX320F128LT-80V/PT | PIC32MX320F128L-80I/PT | PIC32MX340F128L-80I/PT | PIC32MX360F256L-80I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same |
| Core Architecture | MIPS32 M4K (32-bit) | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Max Clock | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 256 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 32 KB | 64 KB |
| Operating Temperature | -40C to +105C (V grade) | -40C to +105C (V) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| USB Interface | USB 2.0 Full-Speed Device/Host/OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Approx Unit Price (qty 1) | $7.38 | $7.38 (same die, T&R variant) | $6.50 (I grade) | $8.20 (256 KB Flash) | $9.10 (256 KB Flash + 64 KB RAM) |
Diferensiator Kunci
- Extended V temperature grade (vsPIC32MX320F128L-80I/PT)
- Cost-optimized memory configuration (vsPIC32MX340F128L-80I/PT)
- Integrated USB Full-Speed OTG controller (vsPIC24FJ series)
Catatan Desain
Decouple VDD/AVDD pairs with a 100 nF ceramic placed within 5 mm of each supply pin and a shared 10 uF bulk near the MCU. Use a separate AVDD trace from the same regulator output, decoupled with its own 100 nF cap, to isolate analog reference noise from the digital rail. For USB-powered designs, ensure VBUS detection through the USB peripheral's internal comparator rather than a GPIO to maintain code compatibility. Estimated: at 80 MHz with all peripherals active, typical IDD is around 60-80 mA per the family datasheet; disable unused peripherals in the PMD register to reduce this to 35-45 mA.
Maintain 90 ohm differential impedance on the USB DP/DM pair routed over a continuous ground reference; keep the pair matched within 150 mil length tolerance. Place the 15 kohm pull-up resistor on D+ close to the MCU pin (under 5 mm) to ensure proper USB signal integrity. For the ICSP connector, keep PGECx/PGEDx traces under 100 mm total length per Microchip's debug header guidelines to avoid programming failures. Use a 4-layer PCB with a dedicated ground plane for best EMC results, particularly for industrial EMC compliance.
Do not skip the 10 uF bulk capacitor on VDD - inrush current during Flash programming can cause brownouts without sufficient bulk capacitance. Configure unused pins as digital outputs (not high-impedance inputs) to minimize supply current. The MCLR pin requires a 10 kohm pull-up to VDD; do not leave it floating. For USB host mode, VBUS must be supplied from a 5V regulator capable of at least 500 mA. Always use the latest XC32 compiler and MPLAB X IDE to avoid known silicon errata issues documented in the PIC32MX3XX/4XX errata sheet.
Informasi Konformitas
RoHS and REACH compliant per Microchip product declaration. Not AEC-Q100 qualified; for automotive applications use AEC-Q100 qualified PIC32MX variants or dsPIC33 families. Lead-free matte-tin finish on TQFP leads.
