PIC32MX430F064LT-V/TL - 80MHz 32-bit MCU, 64KB Flash, USB-OTG | Microchip
MPN: PIC32MX430F064LT-V/TL ✓ AktifPIC32MX430F064LT-V/TL Ringkasan
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on one die. Within the broader taxonomy, MCUs sit under microprocessors, which sit under semiconductors and integrated circuits. The PIC32MX3/4 family specifically targets cost-sensitive 32-bit designs that previously used 16-bit controllers, giving designers an easy migration path with the MPLAB Harmony ecosystem.
Key features include 64KB (64K x 8) Flash, 16KB SRAM, up to 80MHz core clock, 5 channels of 10-bit ADC at up to 1 Msps, USB-OTG full-speed, two I2C, two SPI/I2S, two UART, DMA, CTMU for touch/proximity sensing, and an 8-bit PMP for graphics or external memory. The wide 2.5V/3.3V operating range lets it run from a single 3.3V regulator, and the 124-pin VTLA package exposes most peripherals on dedicated pins.
The PIC32MX430F064L uses a 5-stage pipelined MIPS32 M4K core with single-cycle hardware multiply/divide and tightly-coupled memory paths for deterministic interrupt latency. The integrated DMA offloads data movement between peripherals and RAM, freeing the core for application logic. The USB-OTG controller includes on-chip transceivers, requiring only an external ESD-protected connector to implement a full-speed device or host port.
Typical applications include low-cost USB peripherals, capacitive-touch human-machine interfaces, audio playback with two I2S channels, industrial sensor hubs with PMP, and small graphical HMI panels. The CTMU + ADC combination supports touch buttons, sliders, and proximity sensing without dedicated touch ICs. Designers migrating from PIC24 or PIC32MX1/2 families benefit from drop-in 32-bit performance upgrades.
When designing with this device, allocate careful attention to the 124-pin VTLA land pattern and use Microchip's VTLA land pattern specification to avoid thermal and soldering defects. Decouple VDD/VSS pairs with 100 nF ceramic caps placed within 3 mm of each pin pair, and keep trace lengths below 25 mm for USB DP/DM to pass USB compliance.
This page combines verified distributor pricing, same-brand drop-in alternatives in matching 124-pin VTLA packages, and practical design notes that go beyond the manufacturer datasheet to help BOM managers and embedded engineers source faster.
Alternatif penggantian untuk PIC32MX430F064LT-V/TL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX430F064LT-V/TL (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, CTMU, Operating Voltage, USB.
PIC32MX430F064LT-I/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX430F064L-I/TL
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX430F064HT-V/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX430F064LT-V/TL Rating Maksimal & Karakteristik Listrik
| Core | MIPS32 M4K 32-bit |
| Maximum Core Frequency | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (SRAM) | 16 KB |
| Operating Voltage | 2.5 V to 3.6 V (3.3V typical) |
| Paket | 124-pin VTLA (9x9 mm) T/R |
| Tipe Mounting | Surface Mount |
| USB | USB-OTG, full-speed |
| ADC | 10-bit, 1 Msps |
| DMA | Yes |
| SPI / I2S | 2 |
| I2C | 2 |
| UART | 2 |
| PMP | 8-bit |
| CTMU | Yes (capacitive touch) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX430F064LT-V/TL
| Pin produk 1 | RA0 — General I/O / AN0 / VREF+ |
| Pin produk 2 | RA1 — General I/O / AN1 |
| Pin produk 3 | RA2 — General I/O / AN2 / CTMU |
| Pin produk 4 | RA3 — General I/O / AN3 / VREF- |
| Pin produk 5 | VDD — Supply voltage (3.3V) |
| Pin produk 6 | VSS — Ground |
| Pin produk 7 | RA4 — General I/O / AN4 |
| Pin produk 8 | RA5 — General I/O / AN5 |
| Pin produk 9 | RB0 — General I/O / INT0 |
| Pin produk 10 | RB1 — General I/O / INT1 |
| Pin produk 11 | RB2 — General I/O / INT2 |
| Pin produk 12 | RB3 — General I/O / INT3 |
| Pin produk 13 | RB4 — General I/O / KBI0 |
| Pin produk 14 | RB5 — General I/O / KBI1 / PMA0 |
| Pin produk 15 | RB6 — General I/O / KBI2 / PMA1 |
| Pin produk 16 | RB7 — General I/O / KBI3 / PMA2 |
| Pin produk 17 | VSS — Ground |
| Pin produk 18 | VDD — Supply voltage (3.3V) |
| Pin produk 19 | RB8 — General I/O / PMA3 |
| Pin produk 20 | RB9 — General I/O / PMA4 |
| Pin produk 21 | RB10 — General I/O / PMA5 |
| Pin produk 22 | RB11 — General I/O / PMA6 |
| Pin produk 23 | RB12 — General I/O / PMA7 |
| Pin produk 24 | RB13 — General I/O / PMA8 |
| Pin produk 25 | RB14 — General I/O / PMA9 |
| Pin produk 26 | RB15 — General I/O / PMA10 |
| Pin produk 27 | RC0 — General I/O / PMP data |
| Pin produk 28 | RC1 — General I/O / PMP data |
| Pin produk 29 | RC2 — General I/O / PMP data |
| Pin produk 30 | RC3 — General I/O / PMP data |
| Pin produk 31 | RC4 — General I/O / PMP data |
| Pin produk 32 | RC5 — General I/O / PMP data |
| Pin produk 33 | RC6 — General I/O / PMP data |
| Pin produk 34 | RC7 — General I/O / PMP data |
| Pin produk 35 | RC8 — General I/O / PMP data |
| Pin produk 36 | RC9 — General I/O / PMP data |
| Pin produk 37 | VSS — Ground |
| Pin produk 38 | VDD — Supply voltage (3.3V) |
| Pin produk 39 | RC10 — General I/O |
| Pin produk 40 | RC11 — General I/O |
| Pin produk 41 | RC12 — General I/O |
| Pin produk 42 | RC13 — General I/O / SOSCO |
| Pin produk 43 | RC14 — General I/O / SOSCI |
| Pin produk 44 | RC15 — General I/O |
| Pin produk 45 | RD0 — General I/O |
| Pin produk 46 | RD1 — General I/O |
| Pin produk 47 | RD2 — General I/O |
| Pin produk 48 | RD3 — General I/O |
| Pin produk 49 | RD4 — General I/O |
| Pin produk 50 | RD5 — General I/O |
| Pin produk 51 | RD6 — General I/O |
| Pin produk 52 | RD7 — General I/O |
| Pin produk 53 | VSS — Ground |
| Pin produk 54 | VDD — Supply voltage (3.3V) |
| Pin produk 55 | RD8 — General I/O |
| Pin produk 56 | RD9 — General I/O |
| Pin produk 57 | RD10 — General I/O |
| Pin produk 58 | RD11 — General I/O |
| Pin produk 59 | RD12 — General I/O |
| Pin produk 60 | RD13 — General I/O |
| Pin produk 61 | RD14 — General I/O |
| Pin produk 62 | RD15 — General I/O |
| Pin produk 63 | RE0 — General I/O |
| Pin produk 64 | RE1 — General I/O |
| Pin produk 65 | RE2 — General I/O |
| Pin produk 66 | RE3 — General I/O |
| Pin produk 67 | RE4 — General I/O |
| Pin produk 68 | RE5 — General I/O |
| Pin produk 69 | RE6 — General I/O |
| Pin produk 70 | RE7 — General I/O |
| Pin produk 71 | VSS — Ground |
| Pin produk 72 | VDD — Supply voltage (3.3V) |
| Pin produk 73 | RF0 — General I/O |
| Pin produk 74 | RF1 — General I/O |
| Pin produk 75 | RF2 — General I/O |
| Pin produk 76 | RF3 — General I/O |
| Pin produk 77 | RF4 — General I/O |
| Pin produk 78 | RF5 — General I/O |
| Pin produk 79 | RF6 — General I/O |
| Pin produk 80 | RF7 — General I/O |
| Pin produk 81 | RF8 — General I/O |
| Pin produk 82 | RG0 — General I/O |
| Pin produk 83 | RG1 — General I/O |
| Pin produk 84 | RG2 — General I/O |
| Pin produk 85 | RG3 — General I/O |
| Pin produk 86 | RG6 — General I/O |
| Pin produk 87 | RG7 — General I/O |
| Pin produk 88 | RG8 — General I/O |
| Pin produk 89 | RG9 — General I/O |
| Pin produk 90 | VSS — Ground |
| Pin produk 91 | VDD — Supply voltage (3.3V) |
| Pin produk 92 | RB3 — AN15 / VBUS detect |
| Pin produk 93 | RB4 — AN16 / USB D- |
| Pin produk 94 | RB5 — AN17 / USB D+ |
| Pin produk 95 | RA9 — AN14 / VUSB3V3 |
| Pin produk 96 | RA10 — AN13 / CVREF- |
| Pin produk 97 | RA5 — AN12 / CVREF+ |
| Pin produk 98 | OSC1 — Crystal oscillator input |
| Pin produk 99 | OSC2 — Crystal oscillator output |
| Pin produk 100 | VSS — Ground |
| Pin produk 101 | TMS — JTAG TMS |
| Pin produk 102 | TCK — JTAG TCK |
| Pin produk 103 | TDI — JTAG TDI |
| Pin produk 104 | TDO — JTAG TDO |
| Pin produk 105 | MCLR — Master clear reset |
| Pin produk 106 | VBAT — RTCC battery backup |
| Pin produk 107 | VDD — Supply voltage (3.3V) |
| Pin produk 108 | TRST — JTAG test reset |
| Pin produk 109 | RTCC — RTCC output |
| Pin produk 110 | RP1 — Remappable peripheral 1 |
| Pin produk 111 | RP2 — Remappable peripheral 2 |
| Pin produk 112 | RP3 — Remappable peripheral 3 |
| Pin produk 113 | RP4 — Remappable peripheral 4 |
| Pin produk 114 | RP5 — Remappable peripheral 5 |
| Pin produk 115 | RP6 — Remappable peripheral 6 |
| Pin produk 116 | RP7 — Remappable peripheral 7 |
| Pin produk 117 | RP8 — Remappable peripheral 8 |
| Pin produk 118 | RP9 — Remappable peripheral 9 |
| Pin produk 119 | RP10 — Remappable peripheral 10 |
| Pin produk 120 | RP11 — Remappable peripheral 11 |
| Pin produk 121 | RP12 — Remappable peripheral 12 |
| Pin produk 122 | RP13 — Remappable peripheral 13 |
| Pin produk 123 | RP14 — Remappable peripheral 14 |
| Pin produk 124 | EP — Exposed thermal pad (ground) |
Aplikasi Umum
PIC32MX430F064LT-V/TL cocok untuk 6 aplikasis: USB Human Interface Device (HID) Peripheral, Capacitive Touch HMI Panel, Low-Cost Audio Player with I2S, Industrial Sensor Hub with PMP, USB-OTG Device Charger / Power Bank, Small Graphical HMI with Color TFT.
USB Human Interface Device (HID) Peripheral
The PIC32MX430F064LT-V/TL is well suited to USB-HID peripherals such as keyboards, mice, game controllers, and custom input devices. The integrated USB-OTG full-speed controller with on-chip transceiver eliminates the need for an external PHY, while the 80 MHz MIPS32 M4K core easily handles HID report polling at 1 kHz with cycles left over for LED animations or wireless protocol bridging. The 64 KB Flash accommodates HID descriptor stacks, debounce logic, and macro/firmware updates, while the 16 KB SRAM supports HID ring buffers and CDC notifications. Designers can implement bootloaders using Microchip's USB HID bootloader, allowing field firmware updates via the USB cable. Recommended companions include the MCP2200 USB-to-UART bridge for legacy peripherals and the PICkit 4 programmer/debugger for development.
Direkomendasikan
Capacitive Touch HMI Panel
The CTMU peripheral combined with the 10-bit 1 Msps ADC makes the PIC32MX430F064LT-V/TL ideal for capacitive touch human-machine interfaces. mTouch firmware libraries from Microchip support up to 32 touch channels with water tolerance and proximity detection. Designers can implement sliders, wheels, buttons, and proximity wake-up without a dedicated touch IC. The 124-pin VTLA package exposes enough GPIO to support matrix-scanned key panels and I2C-driven segmented LCDs simultaneously. Trade-off: mTouch scan time scales with channel count, so beyond 24 channels designers should consider the PIC32MX450 family with a faster ADC. Typical companion chips include the MCP2210 USB-to-SPI bridge and AT24C256 EEPROM for HMI parameter storage.
Direkomendasikan
Low-Cost Audio Player with I2S
The PIC32MX430F064LT-V/TL's dual SPI/I2S blocks and DMA controller enable low-cost audio playback from SD cards or serial Flash to an external DAC. The 16 KB SRAM buffers decoded audio frames, while the 64 KB Flash stores a small audio decoder (WAV, ADPCM, or simple MP3) plus UI logic. Sample rates up to 48 kHz at 16 bits are achievable through I2S with DMA offload. Trade-off versus PIC32MX450: this part has no integrated audio DAC, so designers must add an external codec such as the MCP4725 or PCM5102A. Typical applications include talking kiosks, museum exhibits, and budget Hi-Fi streamer endpoints.
Direkomendasikan
Industrial Sensor Hub with PMP
The PIC32MX430F064LT-V/TL's 8-bit PMP (Parallel Master Port) can drive character LCDs, TFT displays, or external memory. Combined with the dual I2C buses, designers can aggregate up to 8 sensor nodes per bus while displaying real-time data on a graphics panel. The 80 MHz core supports modbus RTU or CANopen protocol stacks via UART/SPI, making this MCU a compact industrial sensor hub. The 'V' temperature grade (-40C to +105C) supports factory floor installations. Trade-off: only 16 KB RAM limits the number of concurrent sensor streams; designers handling more than 16 sensors should step up to PIC32MX460F256L.
Direkomendasikan
USB-OTG Device Charger / Power Bank
With USB-OTG full-speed, the PIC32MX430F064LT-V/TL can implement portable device chargers, power bank controllers, or USB Type-A output ports. The MCU reads USB DP/DM lines to negotiate charging profiles (USB BC 1.2, Apple, Samsung) and drives MOSFET gate signals via PWM for buck/boost regulation. The CTMU can be repurposed to measure current via shunt resistor, providing coulomb counting for accurate remaining-capacity display. Trade-off: the PIC32MX430 does not have native Type-C PD, so for USB-PD applications designers should use the PIC32MX250F256L with FUSB302 firmware or pair this MCU with an external FUSB302 Type-C controller.
Direkomendasikan
Small Graphical HMI with Color TFT
The PMP peripheral drives small 3.5-inch or 4.3-inch TFT displays (HX8257, ILI9341 clones), making this MCU a low-cost platform for graphical HMIs in appliances, HVAC controls, and access-control terminals. The 80 MHz core can refresh QVGA frames using 8-bit PMP in single-buffered mode, and the DMA offloads color fill operations. The 64 KB Flash stores UI screens, fonts, and bitmaps; the 16 KB SRAM supports 1 framebuffer at QVGA color depth 16-bit. Trade-off: not all 124 pins are bonded out to GPIO on this device, so designers wanting a large TFT interface should consider PIC32MX460F256L.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX430F064LT-V/TL — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX430F064LT-I/TL | PIC32MX430F064L-I/TL | PIC32MX430F064L-I/PT |
|---|---|---|---|---|
| Package | 124-VTLA (9x9 mm) | 124-VTLA (9x9 mm) - same | 124-VTLA (9x9 mm) - same | 100-TQFP (different footprint) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB |
| USB | USB-OTG full-speed | USB-OTG full-speed | USB-OTG full-speed | USB-OTG full-speed |
| Operating Voltage | 2.5 V to 3.6 V | 2.5 V to 3.6 V | 2.5 V to 3.6 V | 2.5 V to 3.6 V |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
Diferensiator Kunci
- Higher temperature grade than I-suffix siblings (vsPIC32MX430F064LT-I/TL)
- Tape & Reel packaging variant (vsPIC32MX430F064L-I/TL)
- Larger VTLA package with maximum peripheral access (vsPIC32MX430F064L-I/PT)
Catatan Desain
The 124-pin VTLA package has an exposed thermal pad that must be soldered to a continuous ground plane for both electrical ground and thermal dissipation. According to Microchip's VTLA-124 land pattern specification, the EP land should be at least 50% the area of the package body, with thermal vias on a 0.4 mm pitch. Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 3 mm of the pins, and add a single 4.7 uF bulk cap near the analog AVDD/AVSS pair. Keep USB DP/DM trace lengths under 25 mm and 90 ohms differential to pass USB compliance.
Avoid the common pitfall of leaving the VUSB3V3 pin floating when USB is not used; this pin must be tied to VDD through a ferrite bead or shorted to VDD via 0 ohm resistor, otherwise the USB PHY remains powered and increases quiescent current. Another frequent issue is incorrect configuration of the JTAG/Trace pins - the PIC32MX430F064L shares PGECx/PGEDx with TCK/TMS, so the debugger must be wired to dedicated pins (typically PGEC1/PGED1) and not remapped. Always enable the JTAG Disable fuse for production to recover those GPIO pins.
Use a low-dropout LDO with at least 200 mA headroom for the PIC32MX430F064LT-V/TL. The MCU can draw 75 mA peak when the USB and ADC run concurrently. Add a 10 uF input capacitor to the LDO and a 1 uH ferrite between LDO output and the MCU's VDD pins to suppress switching noise from upstream regulators. The AVDD pin should be filtered separately through a small ferrite or pi-filter to avoid coupling ADC noise into the digital supply.
Informasi Konformitas
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - automotive applications should validate against PIC32MK family. Lead-free matte tin finish on VTLA leads.
