PIC32MX564F064LT-I/PT - 80MHz 64KB Flash MCU w/ USB & CAN | Microchip
MPN: PIC32MX564F064LT-I/PT ✓ AktifPIC32MX564F064LT-I/PT Ringkasan
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripherals around a unified internal bus. The PIC32MX5 family specifically belongs to the MIPS32 M4K processor lineage, sits within the broader PIC32 family of 32-bit PIC microcontrollers, and is part of Microchip Technology's microcontroller portfolio. Compared with 8-bit/16-bit MCUs, 32-bit parts offer significantly higher MIPS per mW, larger linear address space, and richer peripheral integration for connected embedded systems.
Key features of the PIC32MX564F064LT-I/PT include USB 2.0 full-speed On-The-Go (OTG) with integrated transceiver, CAN 2.0B active, Parallel Master Port (PMP) for external bus memory or graphics, I2S audio interface, up to 53 general-purpose I/O, and CTMU for capacitive touch / mTouch sensing. Industrial-grade -40C to +85C operation and 3.3V single-supply operation simplify power-tree design. Code protection and secure memory partitions protect firmware IP.
The MIPS32 M4K core implements a 5-stage pipeline with single-cycle multiply and hardware divide, supported by a configurable prefetch cache and 4-channel DMA that offloads peripheral-to-memory transfers. Dedicated peripherals such as the USB OTG controller and CAN module include DMA hooks, allowing sustained USB throughput and CAN traffic without CPU intervention - critical for real-time and connected designs.
Typical applications include USB peripherals (HID, CDC, MSD, audio class), CAN-connected industrial nodes (sensor aggregation, motor control, building automation), embedded HMI with graphics, and general-purpose connected IoT endpoints. The integrated USB and CAN peripherals eliminate external bridge ICs, reducing BOM and board area.
When designing with this part, observe the 3.3V supply requirement, provide adequate decoupling (0.1 uF + bulk), and follow Microchip's recommended PCB layout for the TQFP-100 exposed-pad variant if used. For migration to a lower-power PIC32MX1/2/3/4/5 series, verify peripheral differences in MPLAB X IDE before porting.
This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes drawn from the manufacturer datasheet and reference designs, packaged for engineers selecting the PIC32MX564F064LT-I/PT for new designs or replacements.
Alternatif penggantian untuk PIC32MX564F064LT-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC32MX564F064LT-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Operating Temperature, USB, MSL Level, Package.
PIC32MX564F064L-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX564F128LT-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX564F064LT-I/PF
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX470F512LT-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC32MX460F512L-80I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC32MX564F064LT-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | MIPS32 M4K |
| Core Size | 32-bit Single-Core |
| Max CPU Clock | 80 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| RAM | 32 KB (32K x 8) |
| Operating Voltage | 3.3 V (2.3V-3.6V core range, per family datasheet) |
| Number of I/O | 53 |
| Paket / Case | 100-TQFP (12x12 mm) |
| Tipe Mounting | Surface Mount |
| USB | USB 2.0 Full-Speed OTG with integrated transceiver |
| CAN | CAN 2.0B active |
| DMA Channels | 4 |
| ADC | 10-bit, 1 Msps, up to 16 channels |
| Timers | 5 x 16-bit |
| Suhu Kerja | -40C to +85C (industrial) |
| Packaging | Tape & Reel (TR) |
| Series | PIC32MX564F064L |
| Connectivity | USB, CAN, I2C, SPI, UART, I2S, PMP |
| Level MSL | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant |
Konfigurasi Pin PIC32MX564F064LT-I/PT
| Pin produk 1 | RG15 — GPIO RG15 / SDA2 (I2C2 data) |
| Pin produk 2 | VDD — Supply voltage (3.3V) |
| Pin produk 3 | RA0 — GPIO RA0 / PGED3 (programming data) |
| Pin produk 4 | RA1 — GPIO RA1 / PGEC3 (programming clock) |
| Pin produk 5 | RB0 — GPIO RB0 / AN0 (ADC input) |
| Pin produk 6 | RB1 — GPIO RB1 / AN1 (ADC input) |
| Pin produk 7 | RB2 — GPIO RB2 / AN2 (ADC input) |
| Pin produk 8 | RB3 — GPIO RB3 / AN3 (ADC input) |
| Pin produk 9 | RB4 — GPIO RB4 / AN4 (ADC input) |
| Pin produk 10 | RB5 — GPIO RB5 / AN5 (ADC input) |
| Pin produk 11 | RB6 — GPIO RB6 / AN6 / PGEC2 |
| Pin produk 12 | RB7 — GPIO RB7 / AN7 / PGED2 |
| Pin produk 13 | RB8 — GPIO RB8 / AN8 |
| Pin produk 14 | RB9 — GPIO RB9 / AN9 |
| Pin produk 15 | RB10 — GPIO RB10 / AN10 |
| Pin produk 16 | RB11 — GPIO RB11 / AN11 |
| Pin produk 17 | VSS — Ground |
| Pin produk 18 | RB12 — GPIO RB12 / AN12 |
| Pin produk 19 | RB13 — GPIO RB13 / AN13 |
| Pin produk 20 | RB14 — GPIO RB14 / AN14 |
| Pin produk 21 | RB15 — GPIO RB15 / AN15 |
| Pin produk 22 | VSS — Ground |
| Pin produk 23 | RC0 — GPIO RC0 |
| Pin produk 24 | RC1 — GPIO RC1 |
| Pin produk 25 | RC2 — GPIO RC2 |
| Pin produk 26 | VDD — Supply voltage (3.3V) |
| Pin produk 27 | RC3 — GPIO RC3 |
| Pin produk 28 | RC4 — GPIO RC4 |
| Pin produk 29 | RC5 — GPIO RC5 |
| Pin produk 30 | RC6 — GPIO RC6 |
| Pin produk 31 | RC7 — GPIO RC7 |
| Pin produk 32 | RC8 — GPIO RC8 |
| Pin produk 33 | RC9 — GPIO RC9 |
| Pin produk 34 | VSS — Ground |
| Pin produk 35 | RD0 — GPIO RD0 |
| Pin produk 36 | RD1 — GPIO RD1 |
| Pin produk 37 | RD2 — GPIO RD2 |
| Pin produk 38 | RD3 — GPIO RD3 |
| Pin produk 39 | RD4 — GPIO RD4 |
| Pin produk 40 | RD5 — GPIO RD5 |
| Pin produk 41 | RD6 — GPIO RD6 |
| Pin produk 42 | RD7 — GPIO RD7 |
| Pin produk 43 | RD8 — GPIO RD8 |
| Pin produk 44 | VDD — Supply voltage (3.3V) |
| Pin produk 45 | RD9 — GPIO RD9 |
| Pin produk 46 | RD10 — GPIO RD10 |
| Pin produk 47 | RD11 — GPIO RD11 |
| Pin produk 48 | RD12 — GPIO RD12 |
| Pin produk 49 | RD13 — GPIO RD13 |
| Pin produk 50 | RD14 — GPIO RD14 |
| Pin produk 51 | RD15 — GPIO RD15 |
| Pin produk 52 | VSS — Ground |
| Pin produk 53 | RE0 — GPIO RE0 / PMD0 |
| Pin produk 54 | RE1 — GPIO RE1 / PMD1 |
| Pin produk 55 | RE2 — GPIO RE2 / PMD2 |
| Pin produk 56 | RE3 — GPIO RE3 / PMD3 |
| Pin produk 57 | RE4 — GPIO RE4 / PMD4 |
| Pin produk 58 | RE5 — GPIO RE5 / PMD5 |
| Pin produk 59 | RE6 — GPIO RE6 / PMD6 |
| Pin produk 60 | RE7 — GPIO RE7 / PMD7 |
| Pin produk 61 | VDD — Supply voltage (3.3V) |
| Pin produk 62 | RF0 — GPIO RF0 |
| Pin produk 63 | RF1 — GPIO RF1 |
| Pin produk 64 | RF2 — GPIO RF2 |
| Pin produk 65 | RF3 — GPIO RF3 |
| Pin produk 66 | RF4 — GPIO RF4 |
| Pin produk 67 | RF5 — GPIO RF5 |
| Pin produk 68 | RF6 — GPIO RF6 / U1RTS |
| Pin produk 69 | RF7 — GPIO RF7 / U1CTS |
| Pin produk 70 | VSS — Ground |
| Pin produk 71 | RF8 — GPIO RF8 / U2RTS |
| Pin produk 72 | RF9 — GPIO RF9 / U2CTS |
| Pin produk 73 | RG0 — GPIO RG0 |
| Pin produk 74 | RG1 — GPIO RG1 |
| Pin produk 75 | RG2 — GPIO RG2 / D+ (USB) |
| Pin produk 76 | RG3 — GPIO RG3 / D- (USB) |
| Pin produk 77 | RG6 — GPIO RG6 |
| Pin produk 78 | RG7 — GPIO RG7 |
| Pin produk 79 | RG8 — GPIO RG8 |
| Pin produk 80 | RG9 — GPIO RG9 |
| Pin produk 81 | VSS — Ground |
| Pin produk 82 | VDD — Supply voltage (3.3V) |
| Pin produk 83 | RA2 — GPIO RA2 |
| Pin produk 84 | RA3 — GPIO RA3 |
| Pin produk 85 | RA4 — GPIO RA4 |
| Pin produk 86 | RA5 — GPIO RA5 |
| Pin produk 87 | RA6 — GPIO RA6 / TRCLK |
| Pin produk 88 | RA7 — GPIO RA7 / TRDAT |
| Pin produk 89 | RA8 — GPIO RA8 |
| Pin produk 90 | RA9 — GPIO RA9 |
| Pin produk 91 | RA10 — GPIO RA10 |
| Pin produk 92 | RA11 — GPIO RA11 |
| Pin produk 93 | RA12 — GPIO RA12 |
| Pin produk 94 | RA13 — GPIO RA13 |
| Pin produk 95 | RA14 — GPIO RA14 |
| Pin produk 96 | RA15 — GPIO RA15 |
| Pin produk 97 | VSS — Ground |
| Pin produk 98 | RC12 — GPIO RC12 |
| Pin produk 99 | RC13 — GPIO RC13 |
| Pin produk 100 | RC14 — GPIO RC14 |
Aplikasi Umum
PIC32MX564F064LT-I/PT cocok untuk 6 aplikasis: USB Human Interface Device (HID), CAN-Based Industrial Sensor Node, Embedded Graphical HMI Controller, USB-to-CAN Bridge Gateway, Portable Data Logger with USB, Connected IoT Edge Node (USB/CAN).
USB Human Interface Device (HID)
The PIC32MX564F064LT-I/PT's integrated USB 2.0 Full-Speed OTG controller with on-chip transceiver is ideal for USB HID peripherals such as keyboards, mice, custom input controllers, and industrial keypads. At 80 MHz the M4K core services HID report generation without taxing USB bandwidth, while the 4-channel DMA offloads endpoint transfers, leaving CPU headroom for application logic. With 64 KB Flash it fits HID stacks plus custom firmware; with 53 I/O it can scan matrix keypads or drive LEDs directly. Pair it with the MCP2200 or USBLC6-2SC6 for isolated/compliant designs, and use the Microchip Harmony USB stack for production-ready class drivers.
Direkomendasikan
CAN-Based Industrial Sensor Node
The PIC32MX564F064LT-I/PT integrates CAN 2.0B active with hardware acceptance filters and DMA hooks, making it well-suited for industrial sensor nodes on a CAN/CANopen or J1939 bus. The 80 MHz core runs the CAN stack and 10-bit ADC sampling without bottleneck; the 4-channel DMA moves ADC samples directly to memory, leaving the CPU free for filtering. With 53 I/O it can interface SPI/analog sensors (temperature, pressure, flow) and drive actuators. Industrial-grade -40C to +85C operation matches factory floor requirements. Add a TJA1050 or MCP2551 CAN transceiver, ISO 1050 for isolation, and 120-ohm termination as required by the bus topology.
Direkomendasikan
Embedded Graphical HMI Controller
With its Parallel Master Port (PMP) capable of driving external TFT displays up to 8-bit parallel, and the I2S peripheral for audio feedback, the PIC32MX564F064LT-I/PT is well matched to entry-level embedded HMI panels. The 53 I/O pins provide spare capacity for capacitive touch sensing via the CTMU peripheral, eliminating a dedicated touch controller. The 80 MHz MIPS core comfortably runs lightweight graphics libraries (legato, MPLAB Harmony Graphics) for menus and gauges. Use a 3.3V TFT with integrated controller (e.g., HX8347-I based), and pair with the PIC32MX5 family graphics examples for fast HMI prototyping.
Direkomendasikan
USB-to-CAN Bridge Gateway
A natural application for the PIC32MX564F064LT-I/PT is a USB-to-CAN bridge gateway: USB 2.0 FS OTG on one side, CAN 2.0B active on the other, with the M4K core handling protocol translation. Engineers use this topology for laptop-based vehicle diagnostics, factory-floor PC tools, and lab instrumentation. The 64 KB Flash fits the USB CDC + CAN stack with margin for vendor commands; 32 KB RAM is adequate for buffers. Reference firmware is available in the Microchip Harmony USB Device + CAN library, and pair with MCP2515 (external CAN) or use the on-chip CAN for simpler designs.
Direkomendasikan
Portable Data Logger with USB
The PIC32MX564F064LT-I/PT's combination of 32 KB RAM, 10-bit 1 Msps ADC, USB 2.0 FS OTG, and 53 I/O fits portable USB data loggers. Sample sensors at up to 1 Msps into RAM (with DMA moving samples directly to memory), then dump the buffer over USB to a host PC. The 64 KB Flash holds the USB MSC class driver and logger application. Industrial temperature range enables outdoor/vehicle deployments. Add a Li-ion charger (MCP73831) and an SPI FRAM (FM25V02) for non-volatile storage; the 53 I/O can monitor multiple sensor channels.
Direkomendasikan
Connected IoT Edge Node (USB/CAN)
For IoT edge nodes requiring both USB connectivity (configuration/update port) and CAN (backhaul to vehicle/industrial bus), the PIC32MX564F064LT-I/PT offers a single-chip solution. The 4-channel DMA lets the MCU handle concurrent USB traffic (e.g., MQTT-over-USB, OTA updates) while sampling CAN messages for local processing. The industrial -40C to +85C range supports harsh environments. With 64 KB Flash the device fits TLS-over-USB or a small MQTT client plus the CAN driver; consider PIC32MX470F512LT-I/PT (512 KB Flash) when running WolfSSL or richer TCP/IP stacks.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC32MX564F064LT-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC32MX564F064L-I/PT | PIC32MX564F128LT-I/PT | PIC32MX564F064LT-I/PF | PIC32MX470F512LT-I/PT | PIC32MX460F512L-80I/PT |
|---|---|---|---|---|---|---|
| Package | 100-TQFP (12x12 mm) | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same | 100-TQFP (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | MIPS32 M4K, 32-bit | MIPS32 M4K, 32-bit - same | MIPS32 M4K, 32-bit - same | MIPS32 M4K, 32-bit - same | MIPS32 M4K, 32-bit - same | MIPS32 M4K, 32-bit - same |
| Max CPU Clock | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 120 MHz | 80 MHz |
| Flash | 64 KB | 64 KB | 128 KB | 64 KB | 512 KB | 512 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB | 32 KB |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS (verify variant) |
| CAN | CAN 2.0B active | CAN 2.0B active | CAN 2.0B active | CAN 2.0B active | CAN 2.0B active | CAN 2.0B active |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| Approx. Unit Price @ qty 1 | $5.78 | ~$5.65 (tray variant) | ~$6.20 | ~$5.78 | ~$7.40 | ~$6.50 |
Diferensiator Kunci
- Tape & Reel shipping format optimized for SMT assembly (vsPIC32MX564F064L-I/PT)
- Doubles program memory headroom at same footprint (vsPIC32MX564F128LT-I/PT)
- Highest Flash and 50% faster core in the same package (vsPIC32MX470F512LT-I/PT)
- Migration path with larger memory, no board change (vsPIC32MX460F512L-80I/PT)
Catatan Desain
The PIC32MX564F064LT-I/PT operates from a single 3.3V supply (2.3V-3.6V core range, per the family datasheet). Place a 0.1 uF decoupling capacitor close to every VDD pin, plus a 4.7 uF bulk capacitor near the supply input. The MCU's core runs at 80 MHz; switching noise can couple into analog rails, so place an additional ferrite bead + 10 uF cap on AVDD if you are sampling the 10-bit ADC at >500 ksps.
Route the USB D+ and D- lines (RG2/RG3) as a 90-ohm differential pair with matched length, kept short and isolated from noisy digital traces. Place the 48 MHz USB reference clock source as close to the MCU as possible and route it over a continuous ground reference. For CAN bus signals, place the MCP2551/ISO1050 transceiver near the bus connector and route the CAN_H/CAN_L pair as a 120-ohm differential.
Program/debug pins PGEDx/PGECx (RA0/RA1, RB6/RB7) must be accessible for MPLAB ICD/PICkit; do not route high-speed signals on these pins without bypass. If using trace, route TRCLK/TRDAT (RA6/RA7) to a header. The Parallel Master Port (PMP) pins PMD0-PMD7 on RE0-RE7 should be length-matched if driving a TFT directly to avoid skew.
Estimated: total Flash endurance is approximately 1000 erase/write cycles per row before wear. Implement wear-leveling if you plan to update configuration frequently. Do not exceed 3.6V on any VDD pin or 5V on any digital I/O - the part is NOT 5V tolerant. When migrating firmware from PIC32MX3/4 to PIC32MX5/6/7, recheck peripheral library versions because PPS pin mappings differ between sub-families.
Estimated: at maximum 80 MHz core clock and full peripheral activity, the PIC32MX564F064LT-I/PT draws approximately 70-90 mA from 3.3V (~250-300 mW). The 100-pin TQFP theta_JA is approximately 39 C/W (with standard JEDEC 4-layer test board), giving a ~10-12 C temperature rise - well within the industrial range. For forced-air or enclosed housings, verify with a thermocouple measurement.
Informasi Konformitas
RoHS and REACH compliant per Microchip product environmental compliance program. Halogen-free per Microchip policy. Not AEC-Q100 qualified - this is an industrial-grade MCU, not automotive-grade; for automotive designs use AEC-Q100-qualified variants from Microchip's PIC32 family.
