PS5018-E18 - PCIe 4.0 x4 NVMe Controller | PHISON
MPN: PS5018-E18 ✓ AktifPS5018-E18 Ringkasan
An NVMe controller is the central semiconductor in a flash-based solid-state drive. It translates a host interface and NVMe command set into operations across multiple NAND channels, manages flash translation, wear leveling, error correction, garbage collection, and data integrity. As an SSD controller, it belongs to the semiconductor hierarchy and coordinates storage media, firmware, DRAM, and the host PCIe interface. Unlike a conventional disk controller, it has no moving parts and must sustain substantially higher random-operation rates.
The PS5018-E18's eight-channel architecture is intended for high-throughput solid-state storage, while PCIe 4.0 x4 provides four lanes of host connectivity. The verified data identifies support for PCIe generation and lane configuration but does not provide authoritative controller-level sequential read or write figures. Complete SSDs using this controller have been reported with capacities as high as 8 TB, but capacity and performance belong to the finished drive rather than the controller itself. NAND type, firmware, DRAM, thermal design, and workload also affect measured results.
The controller integrates PCIe, NVMe processing, NAND-channel management, and flash-management firmware into one BGA package. It is normally soldered onto an SSD PCB together with NAND packages, DRAM, power-delivery components, and thermal hardware. Because firmware and board design are integral to SSD operation, replacing only the controller in an existing product requires exact electrical, pin, firmware, NAND, and validation support; generic cross-referencing alone does not establish drop-in compatibility.
Typical applications include PCIe 4.0 x4 M.2 2280 SSDs, high-end gaming PCs, desktop workstations, notebook storage, and OEM storage platforms. The reported consumer temperature range of 0°C to 70°C suits temperature-controlled consumer environments. An industrial enclosure should not substitute this device without verifying the broader requirements and considering the PS5018-E18DI, whose official listing includes a -40°C to 85°C range.
A primary design consideration is total SSD power and heat management. High sequential transfer activity can raise controller and DRAM temperatures, while compact M.2 housings limit airflow. Firmware, NAND compatibility, validation, and thermal throttling must therefore be evaluated as a complete system. The PS5018-E18 is best suited to designers building a new validated SSD platform rather than treating it as a universally interchangeable catalog part.
Alternatif penggantian untuk PS5018-E18 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifPS5018-E18 Rating Maksimal & Karakteristik Listrik
| Product Type | NVMe SSD controller |
| PCIe Interface | PCIe 4.0 x4 |
| NAND Channel Count | 8 channels |
| Process Technology | 12 nm FinFET |
| CPU Architecture | Dual-core ARM Cortex-R |
| Release Year | 2020 |
| Rentang Suhu Kerja | 0°C to 70°C |
| Paket | BGA-256 |
| Tipe Mounting | Surface mount |
| Primary Storage Interface | NVMe over PCIe |
| Controller Function | PCIe, NVMe, NAND, flash-management, FTL, and data-integrity management |
| Reported SSD Form Factor | M.2 2280 |
| Reported SSD Capacity Range | 256 GB to 8 TB |
PS5018-E18 bga-256 Diamant Konfigurasi Panduan
Konfigurasi pin untuk PS5018-E18 (bga-256 pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk PS5018-E18.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PS5018-E18 cocok untuk 6 aplikasis: Consumer PCIe 4.0 M.2 SSD, Gaming Desktop Storage, High-Performance Notebook SSD, OEM Desktop Storage Platform, PCIe 4.0 Storage Expansion, Creator Workstation Storage.
Consumer PCIe 4.0 M.2 SSD
The PS5018-E18 fits a consumer PCIe 4.0 x4 M.2 2280 SSD because it combines four PCIe lanes with eight NAND channels. This architecture provides the bandwidth structure expected from a high-speed flash drive while keeping the module compatible with a widely used client-storage form factor. Actual performance must be validated with the selected NAND, DRAM, firmware, and thermal design because the verified controller data does not provide an authoritative sequential throughput figure.
Direkomendasikan
Gaming Desktop Storage
A gaming desktop can use an SSD built around the PS5018-E18 when its motherboard supports PCIe 4.0 x4 M.2 storage. The eight-channel controller is appropriate for reducing the storage bottleneck associated with single-channel flash arrangements, while its 0°C to 70°C operating range fits a normally cooled desktop environment. Firmware tuning, heatsinking, sustained-write behavior, and capacity endurance should be validated before consumer release.
Direkomendasikan
High-Performance Notebook SSD
PS5018-E18 is suitable for a compact notebook SSD that must negotiate PCIe 4.0 x4 while operating within 0°C to 70°C. Eight NAND channels help support parallel storage workloads, but the small M.2 enclosure can retain heat during sustained transfers. Notebook validation should include power-state transitions, sleep recovery, thermal throttling, battery impact, and host-controller compatibility rather than relying only on short benchmark results.
Direkomendasikan
OEM Desktop Storage Platform
The PS5018-E18 can anchor an OEM desktop SSD platform when the customer requires PCIe 4.0 x4, eight-channel NAND management, and a 2020-generation controller architecture. Using the controller does not make every completed drive identical: NAND generation, DRAM configuration, firmware, power management, and validation determine endurance and performance. Production adoption should follow PHISON qualification, compatibility, and lifecycle processes.
Direkomendasikan
PCIe 4.0 Storage Expansion
In a desktop or workstation PCIe expansion card, PS5018-E18 can drive a high-bandwidth NVMe SSD connected through a four-lane PCIe 4.0 interface. The controller's eight NAND channels suit a single high-performance storage device, while the BGA-256 package requires careful PCB layout, power delivery, and heat spreading. Validation must include lane bifurcation settings, hot-plug behavior if claimed, enclosure temperature, and sustained workload stability.
Direkomendasikan
Creator Workstation Storage
A creator workstation benefits from an SSD platform based on PS5018-E18 when rapid transfer of large media files is important. PCIe 4.0 x4 provides the host interface, and eight NAND channels can sustain parallel flash activity, but real-world editing performance also depends on DRAM, NAND quality, file system, and thermal policy. Validate sustained writes because short bursts do not establish reliable performance during large project transfers or cache spill operations.
Direkomendasikan
Data referensi engineering untuk PS5018-E18 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Diferensiator Kunci
- Higher host-interface generation than the identified PCIe 3.0 x4 candidate (vsIMP3M8B3E2A2A1I3B2A0000)
- Eight-channel NVMe controller architecture (vsIMP3M8B3E2A2A1I3B2A0000)
- Defined commercial operating range (vsPS5018-E18DI)
Catatan Desain
Validate the complete M.2 SSD under sustained sequential and mixed workloads because the PS5018-E18's controller, DRAM, and NAND share a compact thermal environment. The verified controller range is 0°C to 70°C, but no power or thermal-resistance data is supplied. Use the manufacturer's thermal guidance, preserve airflow around the module, and verify throttling behavior before setting a performance target.
Treat the BGA-256 layout, power rails, PCIe signals, NAND interfaces, and DRAM connections as one controlled design. Place decoupling and routing exactly as required by PHISON design guidance, and validate signal and power integrity at PCIe 4.0 data rates. The verified snippets do not provide a pinout or electrical limits, so no pin-level layout should be inferred from this page.
Do not assume that a finished 256 GB to 8 TB SSD using PS5018-E18 is a purchasable controller substitute with identical behavior. SSD results also depend on NAND, DRAM, firmware, capacity, power management, and testing conditions. For repair or redesign, obtain controlled PHISON documentation and qualify the exact NAND-and-firmware combination rather than comparing retail SSD benchmarks.
Informasi Konformitas
The verified manufacturer result provides a temperature range and product documents but no explicit environmental-compliance statements. No compliance claim is inferred.
