R5F10BAGLSP#U5 - 16-Bit 32MHz RL78/F13 MCU | Renesas
MPN: R5F10BAGLSP#U5 ✓ AktifR5F10BAGLSP#U5 Ringkasan
The RL78/F13 is a low-power 16-bit microcontroller family positioned within the broader embedded processor hierarchy: RL78 core -> 16-bit microcontroller -> embedded controller -> semiconductor. Compared with larger 32-bit control devices, the RL78 architecture focuses on efficient code execution, compact instruction handling, and low standby consumption. The family is designed for applications that require deterministic peripheral control and automotive communication functions without a high-performance application processor.
The R5F10BAGLSP#U5 combines 128 KB of program flash with a 32 MHz clock, a built-in CAN module, and a built-in LIN module. These features make it suitable for distributed vehicle electronics, body-control modules, sensor nodes, actuator controllers, and industrial communications equipment. The part also includes safety-related functions identified by Renesas, including RAM ECC, PLL lock detection, and port-output state monitoring.
The 30-LSSOP package keeps the device compatible with high-density surface-mount assembly while supporting automotive-style communication designs. Programming and firmware development use the Renesas RL78 toolchain and debugging ecosystem. Designers should review the package-specific pin assignment and peripheral multiplexing tables before assigning mixed-function pins, especially when using CAN, LIN, high-speed timers, or external memory interfaces.
Typical deployments include CAN-connected automotive controllers, LIN sub-net nodes, compact motor and relay control modules, battery-powered sensor interfaces, and industrial embedded controllers. Its low-power orientation is valuable when the duty cycle is dominated by standby periods. For CAN-heavy designs, the combination of an integrated CAN peripheral and 128 KB flash reduces external component count and simplifies firmware organization.
The primary design trade-off is integration versus board area. The 30-LSSOP package is smaller than many legacy leaded or larger surface-mount options, but mixed-function pins and the relatively dense footprint require careful assembly planning. Use the Renesas datasheet pin-description table to verify signal multiplexing, and validate the final PCB against the manufacturer’s recommended land pattern and electrical test guidance.
This product page summarizes the verified device identity, package, memory configuration, communication features, and application guidance while identifying which technical details still require confirmation from the manufacturer’s full documentation. It also organizes same-family alternatives for engineering comparison rather than treating every similar RL78 device as an interchangeable replacement.
Alternatif penggantian untuk R5F10BAGLSP#U5 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
R5F10BAGLSP#W5
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
R5F10BAGLSP#G5
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
R5F10BAGLSP#U5 Rating Maksimal & Karakteristik Listrik
| Device Type | 16-bit microcontroller |
| Series | RL78/F13 |
| CPU | RL78 16-bit core |
| Frekuensi Bawah Maximum | 32 MHz |
| Flash Memory | 128 KB (128K x 8) |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| Paket | 30-LSSOP |
| Package Type | Surface-mount LSSOP |
| RAM ECC | Supported |
| PLL Lock Function | Supported |
| Port Output State Monitoring | Supported |
| Power Consumption Positioning | Low-consumption RL78/F13 family |
| Process Technology | CMOS |
R5F10BAGLSP#U5 surface-mount lssop Diamant Konfigurasi Panduan
Konfigurasi pin untuk R5F10BAGLSP#U5 (surface-mount lssop pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk R5F10BAGLSP#U5.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
R5F10BAGLSP#U5 cocok untuk 6 aplikasis: Automotive CAN Control Node, LIN Automotive Subnet Module, Battery-Powered Sensor Interface, Industrial Communications Controller, Motor and Relay Control Module, Robotics and Equipment Hub.
Automotive CAN Control Node
The R5F10BAGLSP#U5 fits compact automotive CAN nodes because it combines an RL78 16-bit core operating up to 32 MHz with 128 KB of flash and a built-in CAN module. The MCU can execute control logic, diagnostics, and communication handling while the integrated peripheral reduces the need for a separate CAN controller. RAM ECC, PLL lock monitoring, and port-output state monitoring add useful diagnostics for controlled automotive environments. The 30-LSSOP format also supports space-conscious board layouts, although the external CAN transceiver, termination, and protection network remain necessary.
Direkomendasikan
LIN Automotive Subnet Module
The R5F10BAGLSP#U5 is appropriate for LIN-connected vehicle sub-net modules because its integrated LIN interface works alongside 128 KB of program flash. Designers can place sensing, diagnostic, and actuator-control logic in one MCU while retaining a 32 MHz clock for responsive peripheral operation. The built-in CAN module also allows a single controller to bridge or monitor CAN and LIN domains. A LIN physical-layer transceiver is still required, and PCB routing should keep the communications section separated from sensitive input and power-return paths.
Direkomendasikan
Battery-Powered Sensor Interface
The R5F10BAGLSP#U5 can serve as the control MCU in a battery-powered sensor interface when low-consumption operation and communication capability are priorities. The RL78/F13 family is positioned for low power use, and 128 KB of flash provides room for acquisition logic, calibration tables, communication protocols, and diagnostics. The 32 MHz operating frequency allows timers and serial interfaces to be serviced without moving to a larger processor. Confirm the exact supply-voltage range and standby-current limits from the manufacturer documentation before finalizing the power budget.
Direkomendasikan
Industrial Communications Controller
The R5F10BAGLSP#U5 suits compact industrial communications controllers that need a CAN or LIN-capable local MCU rather than a high-performance processor. Its 128 KB flash can hold communication stacks, device drivers, diagnostics, and application logic, while the 32 MHz RL78 core handles timers and service tasks. The 30-LSSOP package helps reduce board area in distributed control cabinets and equipment modules. Designers should provide proper transceiver isolation or protection, verify industrial temperature requirements, and follow the manufacturer’s pin-multiplexing guidance during PCB planning.
Direkomendasikan
Motor and Relay Control Module
The R5F10BAGLSP#U5 can coordinate timing, input conditioning, and communications in a compact motor or relay-control module. A 32 MHz clock supports responsive timer-based sequencing, and 128 KB of flash leaves room for state-machine logic, protection routines, and diagnostic messages. Integrated CAN or LIN connectivity allows the module to participate in a larger vehicle or industrial network instead of operating as an isolated controller. The MCU does not directly drive high-power loads, so gate drivers, relays, protection devices, and appropriate power grounding remain part of the complete solution.
Direkomendasikan
Robotics and Equipment Hub
The R5F10BAGLSP#U5 works as a communications and sequencing hub in small robotics, actuator, and industrial equipment systems. Its 128 KB flash supports structured firmware for peripheral scheduling, communications, diagnostics, and configuration management, while the RL78 16-bit architecture favors compact control implementations. The integrated CAN and LIN modules are useful when the hub connects to wired equipment networks. Use the 30-LSSOP footprint only after confirming exposed-pad, assembly, and soldering requirements in the manufacturer package documentation.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk R5F10BAGLSP#U5 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | R5F10BAGLSP#W5 | R5F10BAGLSP#G5 |
|---|---|---|---|
| Package | 30-LSSOP | 30-LSSOP | 30-LSSOP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 16-bit RL78 core | 16-bit RL78 core | 16-bit RL78 core |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| CAN Interface | Built-in CAN module | Built-in CAN module | Built-in CAN module |
| LIN Interface | Built-in LIN module | Built-in LIN module | Built-in LIN module |
Diferensiator Kunci
- Twice the flash capacity of the closest identified alternative (vsR5F10BAGLSP#W5)
- Maintains the same 32 MHz control performance (vsR5F10BAGLSP#W5)
- Same-package consolidation within the RL78/F13 family (vsR5F10BAGLSP#G5)
Catatan Desain
Use the Renesas 30-LSSOP package drawing as the controlling source for land geometry, pin-one orientation, and exposed thermal-pad requirements. Route CAN and LIN signals away from switching nodes and high-current return paths, place the associated protection and transceiver circuitry near the connector, and maintain the ground plane continuous beneath the device where the package construction permits.
Do not treat the 64 KB R5F10BAGLSP#W5 as an unconditional substitute for the 128 KB R5F10BAGLSP#U5. Check the compiled image size, bootloader space, calibration tables, diagnostics, and future update margin. Also verify every multiplexed pin in the package-specific pin table because a package match alone does not establish identical peripheral routing.
Confirm the exact operating-voltage range, regulator tolerances, and sleep-mode currents for the selected suffix before defining the power architecture. Use local decoupling according to the manufacturer reference circuit, provide clean return paths for communications transceivers, and calculate worst-case supply demand across CAN or LIN activity, timers, flash writes, and temperature extremes.
Mixed-function pins can create board-level design conflicts in 30-LSSOP layouts. Build the pin assignment from the package-specific RL78/F13 tables, reserving pins for oscillator, programming, reset, communications, and debug functions before assigning general-purpose I/O. Prototype programming and boot behavior on a representative layout to avoid discovering a late footprint or peripheral conflict.
Informasi Konformitas
The verified device listings do not provide explicit compliance values for the exact ordering code. Automotive-oriented functionality is stated, but AEC-Q100 qualification must not be inferred from the application or ordering suffix alone.