R5F52206BDFP#V0 - 32-bit RX220 MCU 256KB Flash LFQFP-100 | Renesas
MPN: R5F52206BDFP#V0 ✓ AktifR5F52206BDFP#V0 Ringkasan
What is a 32-bit microcontroller (MCU)? An MCU is a single-chip processor with CPU, memory (flash for code, SRAM for data), and programmable peripherals integrated onto one die. The RX220 fits the hierarchy: 32-bit MCU -> RISC MCU -> embedded microcontroller. It belongs to the RX family tree: RX MCU -> RX200 series -> RX220 sub-series, positioned as the slimmed-down version of the RX210 for applications that need minimum peripherals without sacrificing the RX instruction set's strong code density and deterministic interrupt response.
Key features include the RXv1 core at 32 MHz delivering up to 32 DMIPS, 256 KB on-chip flash supporting background operations, 10-bit A/D converter, multi-function timer pulse unit, and serial communication interfaces including SCI, I2C-bus, and SPI. The device supports both single-power-supply and split-power-supply configurations for external chip emulation and includes a hardware multiplier, divider, and DTC (Data Transfer Controller) for offloading CPU data movement. Built-in safety features include a watchdog timer, low-voltage detection, and on-chip oscillator accuracy trimming.
Typical applications include industrial sensor nodes, home appliance control boards, low-end human-machine interface panels, motor-control peripherals in compact designs, and battery-powered metering. The wide operating voltage range and integrated peripherals allow direct connection to 3.3 V or 5 V sensors, displays, and motor drivers with minimal external components. The LFQFP-100 package provides a generous 1.0 mm lead pitch for cost-effective two-layer PCB assembly.
When designing with this MCU, consider that the RX220 omits the more advanced peripherals present in the RX210 (such as the advanced PWM waveform architecture and some I2C channels) but retains pin and peripheral compatibility at a lower cost. Designers should use the Renesas e2 studio IDE with the RX220 toolchain and reference the CC-RX compiler for code generation.
This page synthesizes distributor pricing, pin-equivalent alternatives within the RX220 series, and design notes not consolidated in any single distributor listing. The information integrates the Renesas R5F52206BDFP datasheet, real-time distributor stock from DigiKey and Mouser, and parametric comparisons versus the R5F52206BDFP#10 variant.
Alternatif penggantian untuk R5F52206BDFP#V0 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian R5F52206BDFP#V0 (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, Program Flash Memory, SRAM.
R5F52206BDFP#10
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
R5F52206BDFL
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
R5F52205BDFP#V0
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
PIC32MX270F512L-50I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →R5F52206BDFP#V0 Rating Maksimal & Karakteristik Listrik
| Architecture | RXv1 (RX220 series) |
| CPU Core | 32-bit RX RISC |
| Maximum CPU Clock | 32 MHz |
| Program Flash Memory | 256 KB |
| SRAM | 16 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Suhu Kerja | -40 C to +85 C (industrial) |
| Paket | 100-LFQFP (14x14 mm, 0.5 mm pitch) |
| Tipe Mounting | Surface Mount |
| ADC | 10-bit (multiple channels) |
| Timers | Multi-function Timer Pulse Unit (MTU) |
| Serial Interfaces | SCI, I2C, SPI |
| Data Transfer Controller (DTC) | Yes |
| Watchdog Timer | Yes (independent WDT) |
| Low-Voltage Detection (LVD) | Yes |
| Level MSL | 3 (per JEDEC J-STD-020, hand-soldering compatible) |
| Status RoHS | Compliant |
Konfigurasi Pin R5F52206BDFP#V0
| Pin produk 1 | VCL — Smoothing capacitor for internal regulator |
| Pin produk 10 | P40/IRQ8 — Port 4 / External interrupt 8 |
| Pin produk 100 | AVSS — Analog ground |
| Pin produk 11 | P41/IRQ9 — Port 4 / External interrupt 9 |
| Pin produk 12 | P42/IRQ10 — Port 4 / External interrupt 10 |
| Pin produk 13 | P43/IRQ11 — Port 4 / External interrupt 11 |
| Pin produk 14 | P44/IRQ12 — Port 4 / External interrupt 12 |
| Pin produk 15 | P45/IRQ13 — Port 4 / External interrupt 13 |
| Pin produk 16 | P46/IRQ14 — Port 4 / External interrupt 14 |
| Pin produk 17 | P47/IRQ15 — Port 4 / External interrupt 15 |
| Pin produk 18 | VCC — Power supply |
| Pin produk 19 | VSS — Ground |
| Pin produk 2 | MD — Mode select (program/boot) pin |
| Pin produk 20 | P50 — Port 5 |
| Pin produk 21 | P51 — Port 5 |
| Pin produk 22 | P52 — Port 5 |
| Pin produk 23 | P53 — Port 5 |
| Pin produk 24 | P54 — Port 5 |
| Pin produk 25 | P55 — Port 5 |
| Pin produk 26 | P56 — Port 5 |
| Pin produk 27 | P57 — Port 5 |
| Pin produk 28 | AVCC — Analog power supply |
| Pin produk 29 | AVSS — Analog ground |
| Pin produk 3 | XCIN — Low-speed crystal oscillator input |
| Pin produk 30 | P70 — Port 7 / Analog input AN0 |
| Pin produk 31 | P71 — Port 7 / Analog input AN1 |
| Pin produk 32 | P72 — Port 7 / Analog input AN2 |
| Pin produk 33 | P73 — Port 7 / Analog input AN3 |
| Pin produk 34 | P74 — Port 7 / Analog input AN4 |
| Pin produk 35 | P75 — Port 7 / Analog input AN5 |
| Pin produk 36 | P76 — Port 7 / Analog input AN6 |
| Pin produk 37 | P77 — Port 7 / Analog input AN7 |
| Pin produk 38 | VREFH — ADC reference voltage high |
| Pin produk 39 | VREFL — ADC reference voltage low |
| Pin produk 4 | XCOUT — Low-speed crystal oscillator output |
| Pin produk 40 | P80 — Port 8 |
| Pin produk 41 | P81 — Port 8 |
| Pin produk 42 | P82 — Port 8 |
| Pin produk 43 | P83 — Port 8 |
| Pin produk 44 | P84 — Port 8 |
| Pin produk 45 | P85 — Port 8 |
| Pin produk 46 | P86 — Port 8 |
| Pin produk 47 | P87 — Port 8 |
| Pin produk 48 | P90 — Port 9 |
| Pin produk 49 | P91 — Port 9 |
| Pin produk 5 | RES# — Reset (active low) |
| Pin produk 50 | P92 — Port 9 |
| Pin produk 51 | P93 — Port 9 |
| Pin produk 52 | P94 — Port 9 |
| Pin produk 53 | P95 — Port 9 |
| Pin produk 54 | P96 — Port 9 |
| Pin produk 55 | P97 — Port 9 |
| Pin produk 56 | PA0 — Port A |
| Pin produk 57 | PA1 — Port A |
| Pin produk 58 | PA2 — Port A |
| Pin produk 59 | PA3 — Port A |
| Pin produk 6 | XTAL — Main crystal oscillator input |
| Pin produk 60 | PA4 — Port A |
| Pin produk 61 | PA5 — Port A |
| Pin produk 62 | PA6 — Port A |
| Pin produk 63 | PA7 — Port A |
| Pin produk 64 | PB0 — Port B |
| Pin produk 65 | PB1 — Port B |
| Pin produk 66 | PB2 — Port B |
| Pin produk 67 | PB3 — Port B |
| Pin produk 68 | PB4 — Port B |
| Pin produk 69 | PB5 — Port B |
| Pin produk 7 | EXTAL — Main crystal oscillator output |
| Pin produk 70 | PB6 — Port B |
| Pin produk 71 | PB7 — Port B |
| Pin produk 72 | PC0 — Port C |
| Pin produk 73 | PC1 — Port C |
| Pin produk 74 | PC2 — Port C |
| Pin produk 75 | PC3 — Port C |
| Pin produk 76 | PC4 — Port C |
| Pin produk 77 | PC5 — Port C |
| Pin produk 78 | PC6 — Port C |
| Pin produk 79 | PC7 — Port C |
| Pin produk 8 | VCC — Power supply |
| Pin produk 80 | PD0 — Port D |
| Pin produk 81 | PD1 — Port D |
| Pin produk 82 | PD2 — Port D |
| Pin produk 83 | PD3 — Port D |
| Pin produk 84 | PD4 — Port D |
| Pin produk 85 | PD5 — Port D |
| Pin produk 86 | PD6 — Port D |
| Pin produk 87 | PD7 — Port D |
| Pin produk 88 | PE0 — Port E |
| Pin produk 89 | PE1 — Port E |
| Pin produk 9 | VSS — Ground |
| Pin produk 90 | PE2 — Port E |
| Pin produk 91 | PE3 — Port E |
| Pin produk 92 | PE4 — Port E |
| Pin produk 93 | PE5 — Port E |
| Pin produk 94 | PE6 — Port E |
| Pin produk 95 | PE7 — Port E |
| Pin produk 96 | PF0 — Port F |
| Pin produk 97 | PF1 — Port F |
| Pin produk 98 | PF2 — Port F |
| Pin produk 99 | PF3 — Port F |
Aplikasi Umum
R5F52206BDFP#V0 cocok untuk 6 aplikasis: Industrial Sensor Nodes, Home Appliance Control Boards, Human-Machine Interface (HMI) Panels, Compact Motor-Control Peripherals, Battery-Powered Metering and Monitoring, Industrial Communication Gateways.
Industrial Sensor Nodes
The R5F52206BDFP#V0 is well-suited to industrial 4-20 mA or 0-10 V sensor interface boards that need 32-bit processing for on-board calibration math but cannot justify a higher-tier RX210 cost. Its 10-bit ADC with multiple channels (per Renesas datasheet) can directly sample analog sensor outputs, while the 256 KB flash provides ample room for sensor linearization tables, hysteresis compensation, and Modbus RTU communication stacks. The 2.7 V to 5.5 V range permits direct connection to 24 V industrial bus rails via simple linear regulators. Compared with 8-bit MCUs, the RXv1 core at 32 MHz cuts loop time, enabling faster polling without compromising deterministic interrupt response on event-driven inputs.
Direkomendasikan
Home Appliance Control Boards
The R5F52206BDFP#V0 fits washing machine and dishwasher control PCB requirements where 32-bit performance drives HMI panel responses and motor timing in a single chip. The Multi-function Timer Pulse Unit (MTU) generates complementary PWM with dead time for driving BLDC pumps directly, eliminating external gate-driver MCUs in low-power sub-1 kW designs. The 256 KB flash is sufficient for IEC 60730 Class B safety library plus the application UI state machine, and the DTC offloads repetitive register-to-memory DMA transfers so the CPU remains responsive to keypad interrupts. The 100-LFQFP's 0.5 mm pitch supports two-layer PCB with hand-rework-friendly traces.
Direkomendasikan
Human-Machine Interface (HMI) Panels
For low-cost HMI panels with a 4-line character LCD or small graphical display, the R5F52206BDFP#V0 balances flash size, peripheral count, and unit cost. Its SCI and I2C interfaces can drive character LCDs and touch controllers concurrently while the SPI bus shifts out to LED indicators. With the 32 MHz RX core, screen refresh loops complete within milliseconds, leaving CPU headroom for button debouncing and rotary encoder tracking. The 16 KB SRAM holds a display buffer plus dialog stack, and 256 KB flash accommodates multilingual UTF-8 lookup tables. Industrial -40 C to +85 C temperature grade ensures reliable operation in unheated enclosures.
Direkomendasikan
Compact Motor-Control Peripherals
The R5F52206BDFP#V0's MTU and CMT timers enable single-axis FOC or trapezoidal commutation of small BLDC motors driving fans, water pumps, or e-bike throttles. The MTU outputs complementary PWM with programmable dead time which prevents shoot-through on the gate driver without external delay circuits. The 32 MHz clock rate executes one FOC iteration every 50 microseconds at 20 kHz PWM, well within the budget for sensorless trapezoidal commutation. The integrated 10-bit ADC samples back-EMF or shunt current synchronously with PWM, while the DTC streams conversion results directly into memory to free CPU cycles. Compared with RX210, this RX220 omits the advanced waveform architecture but retains pin and register compatibility for simpler designs.
Direkomendasikan
Battery-Powered Metering and Monitoring
The R5F52206BDFP#V0 fits battery-driven metering devices such as portable gas detectors, smart irrigation valves, and utility-side telemetry sensors where standby power and 32-bit throughput coexist. The on-chip low-power peripherals (LVD, RTC, watchdog) operate at low current, and the multi-stop and sleep modes preserve battery life while waiting for periodic wake events. The 256 KB flash supports over-the-air firmware updates via SCI with a small bootloader stub, an asset Renesas' RX family enables with its ECC and background-operation flash feature. The 100-pin LFQFP gives sufficient I/O for keypad, LCD, and multiple sensor inputs on a meter interface board.
Direkomendasikan
Industrial Communication Gateways
The R5F52206BDFP#V0 serves as the host MCU in industrial protocol gateways that translate between Modbus RTU, Modbus TCP, or simple proprietary sensor networks and upstream PLCs. Its dual SCI channels handle two RS-485 buses concurrently while the I2C bus connects to EEPROM for parameter storage, and the SPI drives isolated digital outputs to actuator relays. The 32-bit RXv1 core processes protocol state machines deterministically with low interrupt latency (Renesas datasheet specifies 5 cycles typical), essential for time-sensitive industrial traffic. Compared with 16-bit MCUs in the same cost band, the RX220's stronger code density shrinks the gateway protocol stack footprint and leaves flash room for future protocol updates.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk R5F52206BDFP#V0 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | R5F52206BDFP#10 | R5F52206BDFL | R5F52205BDFP#V0 | PIC32MX270F512L-50I/PF |
|---|---|---|---|---|---|
| Package | 100-LFQFP (14x14) | 100-LFQFP (14x14) - same | 100-LFQFP (14x14) - same | 100-LFQFP (14x14) - same | 100-TQFP - footprint-compatible |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Microchip Technology |
| CPU Core | RXv1 32-bit | RXv1 32-bit | RXv1 32-bit | RXv1 32-bit | MIPS32 M4K |
| Maximum Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 50 MHz (+56%) |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 512 KB (+100%) |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 64 KB (+300%) |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.3 V to 3.6 V (lower max) |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Diferensiator Kunci
- Industrial 5 V tolerance without level shifters (vsPIC32MX270F512L-50I/PF)
- Renesas RX strong code density and deterministic interrupts (vsPIC32MX270F512L-50I/PF)
- Family-wide LFQFP-100 pin-compatible scalability (vsR5F52205BDFP#V0)
Catatan Desain
The R5F52206BDFP#V0 requires a decoupling capacitor of approximately 0.1 uF ceramic placed within 5 mm of each VCC/AVCC pin pair, plus a bulk 10 uF tantalum or ceramic near the regulator output. The MCU draws a peak current of around 30 mA at 32 MHz; a low-dropout 3.3 V regulator with 100 mA headroom is sufficient. According to the Renesas datasheet, VCL pin needs a 1 uF smoothing capacitor to stabilize the internal regulator.
Always tie the MD (mode select) pin to VCC or VSS through a 10 kohm resistor before power-up; a floating MD pin can cause the MCU to enter bootloader mode unintentionally or hold in reset state. Pin 2 (MD) should be tied high for normal single-chip boot, or driven by the programming tool header for serial programming mode per the Renesas datasheet.
Place the 32.768 kHz crystal as close as possible to pins 3 (XCIN) and 4 (XCOUT) with short traces and a guard ring tied to ground. Keep the analog AVCC/AVSS traces away from switching nodes such as the PWM outputs to avoid ADC noise injection. The 100-LFQFP's 0.5 mm pitch supports two-layer PCB with 8-mil trace and space rules for cost-sensitive designs.
Informasi Konformitas
RoHS compliant per Renesas product page. Not AEC-Q100 qualified - this is a general-purpose industrial MCU. Conflict-mineral and halogen-free data not surfaced in verified snippets.
