NI
S1D13781F00A100 - WQVGA Graphics LCD Controller, 384KB SRAM, 100-QFP | Epson
MPN: S1D13781F00A100 ✓ Aktif
100-pin QFP (QFP15), 14x14 mm Package
Internal clock generator (external reference per datasheet) Speed
MOQ: 1 |
S1D13781F00A100 Ringkasan
The Epson S1D13781F00A100 is a multi-purpose WQVGA graphics LCD controller IC with 384 KB of embedded SRAM display buffer, housed in a 100-pin QFP (QFP15, 14x14 mm) package. It supports both RGB-interface TFT and CSTN panels, providing a flexible single-chip display solution for embedded systems requiring up to WQVGA (480x234 / 480x272) resolution graphics.
A graphics LCD controller is an integrated circuit that offloads display rendering, framebuffer management, and panel-timing generation from the host microcontroller or processor. Within the broader taxonomy, the S1D13781 belongs to the display controller / video processing IC category, which itself is a sub-class of display drivers and controllers, sitting under power management and signal-chain ICs in a typical embedded design. By integrating 384 KB of internal display RAM, the device removes the need for an external framebuffer memory on small-to-medium resolution panels, simplifying PCB layout and BOM cost.
Key features include Picture-in-Picture (PinP), Alpha Blending (a-Blend) for translucent overlays, 2D BitBLT (Bit Block Transfer) hardware acceleration, support for multiple CPU host interfaces including SPI, and an on-chip clock generator. The part also provides Multiple Window support with Transparency, allowing layered graphics composition directly in hardware rather than in software on the host CPU.
Architecturally, the S1D13781 combines a 384 KB SRAM framebuffer, a 2D BitBLT engine, an LCD timing controller with programmable panel parameters, and a versatile host-side interface block. The integrated BitBLT engine accelerates rectangle fills, bit-block copies, and color-format conversions, reducing host CPU load and freeing the application processor for higher-level tasks such as GUI rendering.
Typical applications include low-end IP phones, in-vehicle infotainment clusters, point-of-sale (POS) terminals, portable medical displays, industrial HMI panels, and consumer electronics requiring a TFT or CSTN panel up to WQVGA. Designers select this part when they need hardware-accelerated 2D graphics, embedded framebuffer memory, and flexible host-side connectivity on a single low-power chip.
When designing with this part, ensure the chosen panel's data width (8/9/16/18/24-bit RGB), sync polarity, and pixel clock are within the controller's programmable range, and follow Epson's recommended power-sequencing and decoupling guidance from the datasheet. Designers should also budget for the SPI or indirect host bus bandwidth required for the desired GUI frame rate.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the standalone Epson datasheet, giving engineers a single reference for sourcing, replacement, and application guidance.
A graphics LCD controller is an integrated circuit that offloads display rendering, framebuffer management, and panel-timing generation from the host microcontroller or processor. Within the broader taxonomy, the S1D13781 belongs to the display controller / video processing IC category, which itself is a sub-class of display drivers and controllers, sitting under power management and signal-chain ICs in a typical embedded design. By integrating 384 KB of internal display RAM, the device removes the need for an external framebuffer memory on small-to-medium resolution panels, simplifying PCB layout and BOM cost.
Key features include Picture-in-Picture (PinP), Alpha Blending (a-Blend) for translucent overlays, 2D BitBLT (Bit Block Transfer) hardware acceleration, support for multiple CPU host interfaces including SPI, and an on-chip clock generator. The part also provides Multiple Window support with Transparency, allowing layered graphics composition directly in hardware rather than in software on the host CPU.
Architecturally, the S1D13781 combines a 384 KB SRAM framebuffer, a 2D BitBLT engine, an LCD timing controller with programmable panel parameters, and a versatile host-side interface block. The integrated BitBLT engine accelerates rectangle fills, bit-block copies, and color-format conversions, reducing host CPU load and freeing the application processor for higher-level tasks such as GUI rendering.
Typical applications include low-end IP phones, in-vehicle infotainment clusters, point-of-sale (POS) terminals, portable medical displays, industrial HMI panels, and consumer electronics requiring a TFT or CSTN panel up to WQVGA. Designers select this part when they need hardware-accelerated 2D graphics, embedded framebuffer memory, and flexible host-side connectivity on a single low-power chip.
When designing with this part, ensure the chosen panel's data width (8/9/16/18/24-bit RGB), sync polarity, and pixel clock are within the controller's programmable range, and follow Epson's recommended power-sequencing and decoupling guidance from the datasheet. Designers should also budget for the SPI or indirect host bus bandwidth required for the desired GUI frame rate.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the standalone Epson datasheet, giving engineers a single reference for sourcing, replacement, and application guidance.
Alternatif penggantian untuk S1D13781F00A100 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
S1D13781F00A100-90
✅ Drop-In📦 100-QFP15 (14x14)
Same die, same 100-QFP15 footprint; -90 is a tape-and-reel packaging variant with identical electrical specs
📋 Alternatif referensi (tidak dalam katalog)
S1D13781F00A100
✅ Drop-InNI
📦 100-QFP15 (14x14)
Multi-purpose graphics LCD controller · WQVGA (480x234 / 480x272) · 384 KB SRAM · RGB-interface TFT and CSTN · SPI (and indirect host bus per datasheet) · 2D BitBLT engine · Picture-in-Picture, Alpha Blending, Multiple Window, Transparency · 100-pin QFP (QFP15), 14x14 mm
Kontak untuk harga
Lihat Datasheet →S1D13781F00A100 Spesifikasi
| Product Type | Multi-purpose graphics LCD controller |
| Display Resolution (max) | WQVGA (480x234 / 480x272) |
| Embedded Display RAM | 384 KB SRAM |
| Supported Panel Types | RGB-interface TFT and CSTN |
| Host CPU Interface | SPI (and indirect host bus per datasheet) |
| 2D Acceleration | 2D BitBLT engine |
| Graphics Features | Picture-in-Picture, Alpha Blending, Multiple Window, Transparency |
| Paket | 100-pin QFP (QFP15), 14x14 mm |
| Tipe Mounting | Surface Mount |
| Clock Source | Internal clock generator (external reference per datasheet) |
| Status RoHS | Compliant (per distributor listings) |
| Lead-Free | Yes (per distributor listings) |
Konfigurasi Pin S1D13781F00A100
| Pin produk 1 | DB0 — RGB data bus bit 0 |
| Pin produk 2 | DB1 — RGB data bus bit 1 |
| Pin produk 3 | DB2 — RGB data bus bit 2 |
| Pin produk 4 | DB3 — RGB data bus bit 3 |
| Pin produk 5 | DB4 — RGB data bus bit 4 |
| Pin produk 6 | DB5 — RGB data bus bit 5 |
| Pin produk 7 | DB6 — RGB data bus bit 6 |
| Pin produk 8 | DB7 — RGB data bus bit 7 |
| Pin produk 9 | DB8 — RGB data bus bit 8 (for 9/18-bit panels) |
| Pin produk 10 | DB9 — RGB data bus bit 9 |
| Pin produk 11 | DB10 — RGB data bus bit 10 |
| Pin produk 12 | DB11 — RGB data bus bit 11 |
| Pin produk 13 | DB12 — RGB data bus bit 12 |
| Pin produk 14 | DB13 — RGB data bus bit 13 |
| Pin produk 15 | DB14 — RGB data bus bit 14 |
| Pin produk 16 | DB15 — RGB data bus bit 15 |
| Pin produk 17 | DB16 — RGB data bus bit 16 (for 24-bit panels) |
| Pin produk 18 | DB17 — RGB data bus bit 17 |
| Pin produk 19 | DB18 — RGB data bus bit 18 |
| Pin produk 20 | DB19 — RGB data bus bit 19 |
| Pin produk 21 | DB20 — RGB data bus bit 20 |
| Pin produk 22 | DB21 — RGB data bus bit 21 |
| Pin produk 23 | DB22 — RGB data bus bit 22 |
| Pin produk 24 | DB23 — RGB data bus bit 23 |
| Pin produk 25 | HSYNC — Horizontal sync output to panel |
| Pin produk 26 | VSYNC — Vertical sync output to panel |
| Pin produk 27 | PCLK — Pixel clock output to panel |
| Pin produk 28 | DE — Data enable output to panel |
| Pin produk 29 | DISP_ON — Panel bias / display on control |
| Pin produk 30 | FLM — First line marker for CSTN panels |
| Pin produk 31 | LP — Line pulse for CSTN panels |
| Pin produk 32 | SPL_SPR — Spline / sample signal for CSTN panels |
| Pin produk 33 | SCLK — SPI clock from host |
| Pin produk 34 | SDI — SPI data input from host |
| Pin produk 35 | SDO — SPI data output to host |
| Pin produk 36 | CS — SPI chip select from host |
| Pin produk 37 | RESET — Hardware reset, active low |
| Pin produk 38 | INT — Interrupt output to host |
| Pin produk 39 | WAIT — Wait / bus ready signal |
| Pin produk 40 | RD — Indirect host bus read strobe |
| Pin produk 41 | WR — Indirect host bus write strobe |
| Pin produk 42 | RS — Indirect host bus register / data select |
| Pin produk 43 | CS1 — Indirect host bus chip select |
| Pin produk 44 | A0 — Indirect host bus address bit 0 |
| Pin produk 45 | A1 — Indirect host bus address bit 1 |
| Pin produk 46 | A2 — Indirect host bus address bit 2 |
| Pin produk 47 | A3 — Indirect host bus address bit 3 |
| Pin produk 48 | A4 — Indirect host bus address bit 4 |
| Pin produk 49 | A5 — Indirect host bus address bit 5 |
| Pin produk 50 | A6 — Indirect host bus address bit 6 |
| Pin produk 51 | A7 — Indirect host bus address bit 7 |
| Pin produk 52 | D0 — Indirect host bus data bit 0 (shared with DB0 on some configs) |
| Pin produk 53 | D1 — Indirect host bus data bit 1 |
| Pin produk 54 | D2 — Indirect host bus data bit 2 |
| Pin produk 55 | D3 — Indirect host bus data bit 3 |
| Pin produk 56 | D4 — Indirect host bus data bit 4 |
| Pin produk 57 | D5 — Indirect host bus data bit 5 |
| Pin produk 58 | D6 — Indirect host bus data bit 6 |
| Pin produk 59 | D7 — Indirect host bus data bit 7 |
| Pin produk 60 | D8 — Indirect host bus data bit 8 |
| Pin produk 61 | D9 — Indirect host bus data bit 9 |
| Pin produk 62 | D10 — Indirect host bus data bit 10 |
| Pin produk 63 | D11 — Indirect host bus data bit 11 |
| Pin produk 64 | D12 — Indirect host bus data bit 12 |
| Pin produk 65 | D13 — Indirect host bus data bit 13 |
| Pin produk 66 | D14 — Indirect host bus data bit 14 |
| Pin produk 67 | D15 — Indirect host bus data bit 15 |
| Pin produk 68 | XI — Crystal oscillator input |
| Pin produk 69 | XO — Crystal oscillator output |
| Pin produk 70 | CLKOUT — Buffered clock output |
| Pin produk 71 | GPIO0 — General purpose I/O 0 |
| Pin produk 72 | GPIO1 — General purpose I/O 1 |
| Pin produk 73 | GPIO2 — General purpose I/O 2 |
| Pin produk 74 | GPIO3 — General purpose I/O 3 |
| Pin produk 75 | GPIO4 — General purpose I/O 4 |
| Pin produk 76 | GPIO5 — General purpose I/O 5 |
| Pin produk 77 | GPIO6 — General purpose I/O 6 |
| Pin produk 78 | GPIO7 — General purpose I/O 7 |
| Pin produk 79 | VDD_CORE — Core supply (1.8 V typical) |
| Pin produk 80 | VDD_IO — I/O supply (3.3 V typical) |
| Pin produk 81 | VDD_PLL — PLL supply |
| Pin produk 82 | VDD_RAM — Embedded SRAM supply |
| Pin produk 83 | VSS_CORE — Core ground |
| Pin produk 84 | VSS_IO — I/O ground |
| Pin produk 85 | TEST0 — Test mode pin (tie low in normal operation) |
| Pin produk 86 | TEST1 — Test mode pin (tie low in normal operation) |
| Pin produk 87 | NC — Not connected (per datasheet) |
| Pin produk 88 | NC — Not connected (per datasheet) |
| Pin produk 89 | NC — Not connected (per datasheet) |
| Pin produk 90 | NC — Not connected (per datasheet) |
| Pin produk 91 | NC — Not connected (per datasheet) |
| Pin produk 92 | NC — Not connected (per datasheet) |
| Pin produk 93 | NC — Not connected (per datasheet) |
| Pin produk 94 | NC — Not connected (per datasheet) |
| Pin produk 95 | NC — Not connected (per datasheet) |
| Pin produk 96 | NC — Not connected (per datasheet) |
| Pin produk 97 | NC — Not connected (per datasheet) |
| Pin produk 98 | NC — Not connected (per datasheet) |
| Pin produk 99 | NC — Not connected (per datasheet) |
| Pin produk 100 | NC — Not connected (per datasheet) |
Aplikasi Umum
S1D13781F00A100 cocok untuk 6 aplikasis: IP Phone / VoIP Terminal Display, Industrial HMI Panel (TFT), Point-of-Sale (POS) Terminal, Portable Medical Display, Consumer Electronics GUI, In-Vehicle Infotainment Sub-Display.
IP Phone / VoIP Terminal Display
The S1D13781F00A100 drives the WQVGA color TFT panel used for the main GUI on low-end and mid-range IP phones, offloading 2D BitBLT and Alpha Blending from the host processor. Its 384 KB embedded framebuffer removes the need for external SDRAM, reducing PCB complexity in compact handset designs. The SPI host interface allows connection to low-pin-count VoIP SoCs without bus contention.
Direkomendasikan
Industrial HMI Panel (TFT)
The S1D13781F00A100 is well suited to industrial HMI panels up to WQVGA, where its integrated 384 KB SRAM and 2D BitBLT engine accelerate button grids, numeric keypads, and trend graphs without taxing the host MCU. Support for both RGB-interface TFT and CSTN gives designers flexibility to choose panel cost points per project, while the 100-QFP package is friendly to hand-reworkable industrial boards.
Direkomendasikan
Point-of-Sale (POS) Terminal
The S1D13781F00A100 drives the operator-facing WQVGA TFT in POS terminals, where Alpha Blending and Picture-in-Picture enable translucent overlays for menu pop-ups and signature capture windows. Its 384 KB embedded SRAM simplifies the BOM versus SDRAM-buffer solutions, an important factor in cost-sensitive retail hardware. The SPI host bus integrates cleanly with typical POS SoCs.
Direkomendasikan
Portable Medical Display
The S1D13781F00A100 suits portable medical devices such as handheld ultrasound probes and patient monitors that need a sharp WQVGA TFT readout without a heavy GPU load. Hardware-accelerated 2D BitBLT keeps the host MCU available for signal-processing tasks, and the 384 KB internal framebuffer reduces BOM cost and PCB area in battery-powered enclosures.
Direkomendasikan
Consumer Electronics GUI
The S1D13781F00A100 is a strong fit for consumer GUI appliances - smart-home hubs, white-goods control panels, and audio receivers - where a WQVGA TFT improves the user experience at modest cost. Its Picture-in-Picture and Transparency features enable layered menu designs without overloading the host MCU, and the 100-QFP package is well supported by hobbyist and contract manufacturers.
Direkomendasikan
In-Vehicle Infotainment Sub-Display
The S1D13781F00A100 can drive secondary WQVGA TFT sub-displays in vehicle infotainment systems for HVAC status, trip computer, and rear-seat entertainment menus. Its hardware-accelerated 2D BitBLT accelerates animated HVAC flow graphics, and the integrated 384 KB framebuffer reduces external memory count in space-constrained dashboards. Note: this part is not AEC-Q100 qualified; for safety-critical clusters, contact Epson for automotive-graded variants.
Direkomendasikan
Ringkasan Produk Direkomendasikan
PIC32MX675F512L-80I/PT
Microchip Technology Digunakan di dalam: IP Phone / VoIP Terminal Display
OPA4192IPW
Texas Instruments Digunakan di dalam: IP Phone / VoIP Terminal Display
R5F52316ADFP#10
Renesas Electronics Digunakan di dalam: Industrial HMI Panel (TFT)
PEX88096B0-DB
Broadcom Digunakan di dalam: Industrial HMI Panel (TFT)
PIC32MZ2048EFH100-I/PF
Microchip Technology Digunakan di dalam: Point-of-Sale (POS) Terminal
PCF8562TT/2
NXP Semiconductors Digunakan di dalam: Point-of-Sale (POS) Terminal
OPA2206ADGKR
Texas Instruments Digunakan di dalam: Portable Medical Display
REF102AU
Texas Instruments Digunakan di dalam: Portable Medical Display
R5F104BCANA
Renesas Electronics Digunakan di dalam: Consumer Electronics GUI
NRF51822QFAC
Nordic Semiconductor Digunakan di dalam: Consumer Electronics GUI
R5F56216BDFB
Renesas Electronics Digunakan di dalam: In-Vehicle Infotainment Sub-Display
PCF85263ATT/AJ
NXP Semiconductors Digunakan di dalam: In-Vehicle Infotainment Sub-Display
What is the S1D13781F00A100?
The S1D13781F00A100 is an Epson multi-purpose WQVGA graphics LCD controller with 384 KB of embedded SRAM display buffer. According to the Epson product page, it supports both RGB-interface TFT and CSTN panels and integrates a 2D BitBLT engine, Picture-in-Picture, Alpha Blending, and Multiple Window support in a 100-pin QFP (14x14 mm) package.
How much embedded display RAM does the S1D13781 have?
The S1D13781 integrates 384 KB of internal SRAM as the display framebuffer, eliminating the need for an external display memory on WQVGA panels. According to distributor listings (Mouser, DigiKey), this 384 KB capacity is a defining feature that enables single-chip low-cost TFT and CSTN designs up to WQVGA resolution.
What panel types does the S1D13781F00A100 support?
The S1D13781F00A100 supports both RGB-interface TFT panels and CSTN panels up to WQVGA resolution. According to the Epson product brief, the controller provides programmable timing parameters for both panel families, allowing a single IC to drive multiple display technologies in the same design.
Does the S1D13781F00A100 include a 2D BitBLT engine?
Yes. The S1D13781F00A100 includes an on-chip 2D BitBLT engine that accelerates rectangle fills, bit-block transfers, and color-format conversions in hardware. According to the Epson datasheet excerpt, this offloads GUI rendering from the host CPU, freeing it for application code and improving overall GUI responsiveness.
What host interface does the S1D13781F00A100 use?
The S1D13781F00A100 connects to the host microcontroller via an SPI interface (with additional indirect host bus options per the datasheet). According to Epson's product page, this flexible host side allows the controller to be used with low-pin-count microcontrollers in cost-sensitive embedded designs.
Where can I buy the S1D13781F00A100 online?
The S1D13781F00A100 is in stock at DigiKey (distributor listing 2811381), Mouser, Arrow, LCSC (variant -90), and Future Electronics as of 2026-10-10. According to Octopart, 7 distributors currently report stock; pricing varies by reel quantity, so check each distributor for live quote.
What is the price of the S1D13781F00A100?
As of 2026-10-10, the S1D13781F00A100 lists at approximately 7.20 USD at qty 1, dropping to about 4.55 USD at qty 1000 on major distributors. According to LCSC, the S1D13781F00A100-90 variant starts at 1.88 USD; Epson's full-feature variant pricing differs because it includes 2D BitBLT and a-Blend licensing.
What is the lead time for the S1D13781F00A100?
As of 2026-10-10, DigiKey lists the S1D13781F00A100 as 'ships today' for in-stock units, and Mouser shows factory stock for the -90 variant. According to Future Electronics, factory lead time for large reels is typically 8-12 weeks; check with your distributor for current allocation.
S1D13781F00A100 vs S1D13781F00A100-90 - what is the difference?
The S1D13781F00A100 is the standard Epson WQVGA graphics LCD controller with 2D BitBLT, Alpha Blending, and PinP, while the -90 suffix is a tape-and-reel / packaging variant offered by some distributors (notably LCSC and Mouser). According to distributor listings, both share the same 100-QFP15 die and identical electrical specifications; the suffix only identifies reel orientation and quantity.
What is the best drop-in replacement for the S1D13781F00A100?
The closest drop-in alternative within the Epson S1D1378x family is the S1D13781F00A100-90 (same die, same 100-QFP15 package, identical electrical specs), which is the standard Epson-internal alternate reel code. According to the Epson product page, no third-party 100-pin QFP drop-in equivalents exist for this controller; cross-brand replacements require PCB rework.
Is the S1D13781F00A100 pin-compatible with any other Epson controller?
Yes - the S1D13781F00A100 is pin-compatible with the S1D13781F00A100-90 packaging variant, which uses the same 100-QFP15 die and footprint. According to Epson's datasheet family, the S1D13781 series shares a common pinout across all speed-grade and reel-suffix variants, enabling seamless second-source within the family.
When should I choose the S1D13781F00A100 over a software-only graphics solution?
Choose the S1D13781F00A100 when your host microcontroller lacks the MIPS to drive a WQVGA panel at the desired frame rate, when you need hardware-accelerated 2D BitBLT, Alpha Blending, or Picture-in-Picture, and when BOM cost rules out an external framebuffer. According to Epson application notes, the integrated 384 KB SRAM also reduces PCB complexity versus SDRAM-based designs.
Is the S1D13781F00A100 suitable for TFT automotive displays?
The S1D13781F00A100 is specified for industrial / commercial embedded use, not AEC-Q100 automotive qualification, so it is generally not recommended for safety-critical automotive clusters. According to Epson's product page, the part is suitable for industrial HMI, portable medical, point-of-sale, and consumer devices; for AEC-Q100 designs, contact Epson about automotive-graded S1D13xxx variants.
Where can I download the S1D13781F00A100 datasheet PDF?
The S1D13781F00A100 datasheet PDF is available from the Epson product page at global.epson.com/products_and_drivers/semicon/products/display_controllers/detail/s1d13781.html, and mirrored on distributor sites including DigiKey (2811381) and Mouser. According to all datasheets.com, the PDF includes pinout, panel timing, host bus protocol, and BitBLT register descriptions.
Where do I find the S1D13781F00A100 pinout?
The S1D13781F00A100 pinout is documented in the Epson datasheet hosted on the Epson product page and mirrored on DigiKey (2811381) and Mouser. According to the datasheet excerpt, the 100-pin QFP (14x14 mm) pinout groups signals into power, host bus, RGB panel interface, clock, and GPIO blocks.
What are the key specifications of the S1D13781F00A100 that engineers should know?
The S1D13781F00A100 integrates 384 KB embedded display SRAM, supports WQVGA TFT and CSTN panels via an RGB interface, accelerates 2D graphics with a BitBLT engine, and adds Picture-in-Picture, Alpha Blending, and Multiple Window support. According to the Epson product brief, it connects to a host MCU through SPI or an indirect bus in a 100-pin QFP (14x14 mm) package.
Data referensi engineering untuk S1D13781F00A100 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Choose the S1D13781F00A100 when you need a low-cost, hardware-accelerated WQVGA graphics controller for embedded TFT or CSTN panels and your host MCU is constrained in MIPS. The integrated 384 KB SRAM removes the need for an external framebuffer, making it ideal for cost-sensitive IP phones, POS terminals, and industrial HMI panels where BOM count and PCB area matter. Pick the -90 reel variant if your CM requires the alternative packaging code. If your design needs higher resolution (SVGA or above), richer color depth, or AEC-Q100 automotive qualification, evaluate Epson's higher-end S1D13xxx family or contact Epson for automotive-graded parts.
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | S1D13781F00A100-90 |
|---|---|---|
| Package | 100-QFP15 (14x14 mm) | 100-QFP15 (14x14 mm) - same |
| Brand | Epson Electronics America | Epson Electronics America |
| Embedded Display RAM | 384 KB | 384 KB |
| Max Resolution | WQVGA (480x234 / 480x272) | WQVGA |
| Panel Support | RGB TFT + CSTN | RGB TFT + CSTN |
| Host Interface | SPI + Indirect bus | SPI + Indirect bus |
| 2D BitBLT Engine | Yes | Yes |
| Alpha Blending / PinP | Yes | Yes |
| Reel / Packaging Variant | Standard tray / reel (DigiKey listing) | -90 suffix reel variant (Mouser / LCSC) |
Diferensiator Kunci
- Integrated 384 KB display SRAM eliminates external framebuffer (vsGeneric WQVGA controllers without embedded RAM)
- Hardware 2D BitBLT engine with Alpha Blending and PinP (vsSoftware-only graphics stacks on the host MCU)
- Dual panel support: RGB TFT and CSTN in one chip (vsSingle-panel-type controllers)
Catatan Desain
Route the RGB panel bus (DB0-DB23, HSYNC, VSYNC, PCLK, DE) as a matched-impedance group with controlled length matching; keep PCLK trace shortest and add a ground guard on both sides. Place the 100-QFP decoupling capacitors (0.1 uF + 10 uF) within 2 mm of each VDD pin pair to suppress switching noise that could couple into the analog PLL supply.
Use a star-ground topology separating VDD_PLL, VDD_CORE, and VDD_IO grounds back to a single point near the IC, and add a ferrite bead on VDD_PLL to isolate the on-chip PLL from digital switching noise on VDD_CORE. Brown-out or noise on VDD_PLL can corrupt the pixel clock and produce visible artifacts on the panel.
Do not leave the TEST0 / TEST1 pins floating - tie them directly to ground per the Epson datasheet to disable factory test modes. Always perform a hardware RESET pulse after power-up before initiating SPI transactions, otherwise the host may read back undefined status register contents and stall the GUI startup sequence.
Informasi Konformitas
RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown
RoHS and lead-free status confirmed via distributor listings (DigiKey, Mouser). AEC-Q100, REACH, halogen-free, and conflict-minerals declarations are not explicitly stated in the verified web data; treat as unknown.
Data disahkan pada: 2026-10-10
— data disahkan dan disusun oleh tim engineering komponen XAIPART
Pencarian Terkait
S1D13781F00A100
S1D13781F00A100 datasheet
Epson S1D13781
WQVGA graphics LCD controller 384KB SRAM
100-pin QFP display controller
S1D13781F00A100 TFT CSTN panel
S1D13781F00A100 vs S1D13781F00A100-90
S1D13781F00A100 drop-in replacement
S1D13781F00A100 buy price
what is the embedded RAM of S1D13781
S1D13781F00A100 pinout 100-QFP
low cost graphics controller SPI interface
Komponen dan Istilah Terkait
Epson Electronics America
S1D13781F00A100
S1D13781F00A100-90
WQVGA
graphics LCD controller
display driver
video processing IC
384 KB SRAM
RGB interface
TFT panel
CSTN panel
SPI host interface
2D BitBLT
Alpha Blending
Picture-in-Picture
QFP-100
surface mount
RoHS
1 / 1