STM32F401VDT6 - 84MHz Cortex-M4 384KB MCU | STMicroelectronics
MPN: STM32F401VDT6 ✓ AktifSTM32F401VDT6 Ringkasan
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and communication interfaces into one device. The STM32F401VDT6 belongs to the hierarchy microcontroller, embedded processor, ARM Cortex-M4 processor, and power-efficient embedded controller. Its combination of 84 MHz processing, 384 KB program storage, and 96 KB SRAM allows firmware, control logic, communications, and data buffering to operate from a single device.
Principal features include a 32-bit Arm Cortex-M4 core with DSP and FPU support, a maximum operating frequency of 84 MHz, and 384 KB of Flash organized as 384K x 8 bits. The device provides 96 KB of SRAM and is supplied in a 100-lead LQFP package. These resources are suitable for embedded control systems that need more memory and I/O than entry-level 8-bit or 32-bit microcontrollers without moving to a larger package.
The STM32F4 architecture uses the Arm Cortex-M4 instruction set and supports hardware-assisted floating-point and digital signal-processing operations. Flash memory retains the application firmware while SRAM supports working data, stack space, communication buffers, and real-time state. At 84 MHz, the processor provides a practical balance between responsive control-loop execution, communication handling, and power-conscious embedded processing.
Typical applications include industrial control equipment, sensor and monitoring systems, communication gateways, motor and motion-control modules, compact instruments, and connected embedded products. Its 100-pin package exposes a broader peripheral complement than smaller MCU packages, making it useful where multiple I/O functions and external interfaces are required on a single board.
Designers should verify the exact peripheral assignments, alternate-function routing, and electrical limits in the STMicroelectronics STM32F401xD/xE datasheet before assigning PCB tracks. The LQFP footprint requires careful decoupling near each supply pin, a clean return path, and attention to signal integrity when high-speed interfaces or external memories are connected.
This page combines the manufacturer product information with package, memory, and interface details, drop-in replacement analysis, comparison data, and practical design guidance. It is intended to help engineers evaluate STM32F401VDT6 suitability, understand its alternatives, and plan a reliable LQFP-100 implementation.
Alternatif penggantian untuk STM32F401VDT6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32F401VDT6 (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package, Architecture, Product Type, DSP Support.
STM32F401VET6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32F423VET6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32F411VET6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F446VET6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F401VCT6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32F401VDT6 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 84 MHz |
| CPU Core | Arm Cortex-M4 with DSP and FPU |
| Architecture | 32-bit RISC |
| Flash Memory | 384 KB (384K x 8 bits) |
| SRAM | 96 KB |
| Paket | 100-pin LQFP (14 x 14 mm) |
| Tipe Mounting | Surface mount |
STM32F401VDT6 100-pin lqfp (14 x 14 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM32F401VDT6 (100-pin lqfp (14 x 14 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM32F401VDT6.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM32F401VDT6 cocok untuk 6 aplikasis: Industrial Control and Automation, Sensor and Condition Monitoring, Communication Gateway and Protocol Bridge, Motor and Motion Control, Connected Test and Measurement Instrument, Compact Embedded Data Platform.
Industrial Control and Automation
STM32F401VDT6 fits compact industrial controllers because its Arm Cortex-M4 core operates at up to 84 MHz while 384 KB of Flash accommodates control firmware, configuration data, and update logic. The 96 KB of SRAM supports task stacks, acquisition buffers, and communications without forcing an external memory component. Its 100-pin LQFP package provides a broad connection count for sensors, actuators, status indicators, and field-bus transceivers. In a control cabinet, the MCU can execute proportional-integral-derivative loops, debounce inputs, sequence outputs, and report operating conditions. Validate the industrial temperature grade, supply tolerances, isolation boundaries, and watchdog behavior against the deployment specification.
Direkomendasikan
Sensor and Condition Monitoring
The STM32F401VDT6 is appropriate for multi-sensor monitoring systems that combine periodic acquisition, filtering, threshold evaluation, and local data logging. Its 84 MHz Cortex-M4 core provides enough computational headroom for digital filtering and control logic, while 96 KB of SRAM can hold time-series buffers and communication frames. The 384 KB of Flash supports firmware for multiple sensor types and field-updatable algorithms. A practical implementation places the MCU near the analog front end, performs sensor conversion, applies calibration data, and forwards results through a serial or Ethernet interface. The 100-pin LQFP package also provides ample GPIO and alternate-function options. Confirm ADC, timer, and interface assignments in the device pin table before finalizing the schematic.
Direkomendasikan
Communication Gateway and Protocol Bridge
STM32F401VDT6 works well as the host processor in a communication gateway because the 32-bit Cortex-M4 core handles protocol framing, buffering, and routing at up to 84 MHz. Its 384 KB of Flash can hold multiple protocol stacks and configuration tables, while 96 KB of SRAM provides room for simultaneous receive and transmit queues. The 100-pin LQFP package simplifies access to the serial, USB, Ethernet, and status interfaces available in the STM32F4 family. A gateway implementation can translate between local sensor buses and an Ethernet uplink, monitor traffic statistics, and provide a firmware update path. Because pin multiplexing and peripheral availability vary across STM32F4 devices, validate every connector assignment and interrupt priority before approving a hardware revision.
Direkomendasikan
Motor and Motion Control
STM32F401VDT6 can serve as the real-time controller in compact motor-drive and positioning systems where deterministic execution is required. The 84 MHz Arm Cortex-M4 core includes DSP and FPU support, allowing current-loop calculation, interpolation, and control filtering to execute alongside communication tasks. The 384 KB of Flash accommodates motion algorithms, parameter storage, and diagnostics, while 96 KB of SRAM supports position and velocity state. Its 100-pin LQFP package offers a practical pin count for encoder inputs, PWM outputs, fault signals, and gate-driver interfaces. Use the manufacturer timing and pin-multiplexing tables to select timer channels. The final design must also verify current limits, isolation, protection behavior, and the electrical requirements of the selected power stage.
Direkomendasikan
Connected Test and Measurement Instrument
STM32F401VDT6 is useful in portable measurement instruments that require real-time sampling, calibration, display control, and host communication. At up to 84 MHz, the Cortex-M4 core can execute digital filtering and compensation algorithms while the 96 KB of SRAM holds acquisition and protocol buffers. The 384 KB of Flash provides space for application firmware, calibration tables, and communication routines. Its 100-pin LQFP package simplifies connection to analog front ends, precision references, displays, and isolated serial interfaces. A typical instrument architecture uses the MCU for acquisition control, digital conversion, front-panel updates, and command handling. Confirm the required ADC characteristics, timer precision, voltage references, and operating-temperature grade before allocating analog functions to particular pins.
Direkomendasikan
Compact Embedded Data Platform
STM32F401VDT6 suits compact data-acquisition platforms that combine local processing with network or removable-storage connectivity. Its 384 KB of Flash supports an embedded operating system or layered firmware, 96 KB of SRAM supports working queues and protocol state, and the 84 MHz processor leaves capacity for compression, filtering, and diagnostics. The 100-pin LQFP package is useful when a product needs numerous GPIO, timer, and communication assignments without moving to a very large fine-pitch package. In an edge node, the MCU can normalize sensor data, tag records with timestamps, maintain local fault logs, and forward summarized information upstream. Validate peripheral assignments, boot configuration, memory-map compatibility, and thermal performance under sustained data traffic before release.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32F401VDT6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32F401VET6 | STM32F423VET6 | STM32F411VET6 | STM32F446VET6 | STM32F401VCT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| CPU Core | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU |
| Maximum CPU Frequency | 84 MHz | 84 MHz | 100 MHz | 100 MHz | 180 MHz | 84 MHz |
| Flash Memory | 384 KB | 512 KB | 384 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 96 KB | 96 KB | 128 KB | 128 KB | 128 KB | 64 KB |
| Flash Organization | 384K x 8 bits | 512K x 8 bits | 384K x 8 bits | 512K x 8 bits | 512K x 8 bits | 256K x 8 bits |
| Program Memory | 384 KB Flash | 512 KB Flash | 384 KB Flash | 512 KB Flash | 512 KB Flash | 256 KB Flash |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Price Tier | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
Diferensiator Kunci
- Balanced 384 KB program memory for the STM32F401 access line (vsSTM32F401VCT6)
- Higher performance available in the same 100-pin LQFP class (vsSTM32F401VET6)
- Match to 384 KB Flash designs without an 84 MHz clock increase (vsSTM32F423VET6)
- Substantially higher processing headroom within the same package outline (vsSTM32F446VET6)
Catatan Desain
Place all required decoupling capacitors directly beside the corresponding STM32F401VDT6 supply pins, with short ground returns and the smallest practical loop area. Follow the exact capacitor values, voltage rating, and power-network arrangement specified in the manufacturer datasheet and reference design. Because the device uses a 100-pin LQFP footprint, inspect the exposed perimeter and escape routing carefully so assembly clearances and lead pitch are not confused during layout.
Design the 3.3 V power rail for both steady-state controller demand and startup transients rather than using an average-current estimate alone. The 84 MHz Cortex-M4 core can create fast current edges, so verify the regulator's control-loop behavior, recommended output capacitance, and allowed supply ramp conditions. Confirm that the chosen external components preserve the device's specified operating voltage and that the power-supply sequence matches the boot and reset requirements.
Use the manufacturer pin table and package drawing to assign every LQFP lead before routing. Keep SWD programming and recovery signals accessible, route high-current outputs away from sensitive inputs, and provide a continuous ground reference beneath signal paths where the board stack-up permits. Do not assume that two 100-pin LQFP MCUs are interchangeable merely because their outlines match; alternate-function assignments and peripheral clocks can differ between STM32F4 devices.
Avoid choosing a replacement solely from CPU frequency, Flash capacity, and package name. Confirm boot configuration, pin multiplexing, interrupt mapping, clock-tree requirements, flash organization, SRAM capacity, and peripheral availability for the exact alternate MPN. The 384 KB target also requires enough linker headroom for growth; STM32F401VET6 adds 128 KB of Flash, whereas STM32F401VCT6 removes 128 KB and may not fit the existing firmware.
Informasi Konformitas
Compliance declarations and automotive qualification status were not stated in the manufacturer product information. Confirm these requirements directly with STMicroelectronics for the exact orderable MPN.