STM32H753IIK6 - 480MHz Cortex-M7 MCU | STMicroelectronics
MPN: STM32H753IIK6 ✓ AktifSTM32H753IIK6 Ringkasan
An Arm Cortex-M7 microcontroller is a 32-bit reduced-instruction-set processor core intended for embedded control, signal processing, communications, and connected industrial equipment. The STM32H7 product family occupies the high-performance segment of the broader microcontroller hierarchy, where computational throughput, real-time processing, memory capacity, and integrated peripherals distinguish it from general-purpose microprocessors. STM32H753IIK6 targets designs that require substantial code and data storage without requiring an external memory interface for every application.
Three headline characteristics define this device: a maximum operating frequency of 480 MHz, 2 MB of Flash program memory, and 1 MB of RAM. The 32-bit Cortex-M7 architecture supports efficient handling of control loops and real-time workloads, while the Flash and RAM capacities provide room for substantial firmware, data buffers, and application state. The UFBGA package supports compact PCB construction but requires careful escape routing, assembly planning, and thermal design.
STMicroelectronics positions the STM32H753xI family as a high-performance Arm Cortex-M7 platform operating up to 480 MHz. Its combination of processing speed and embedded memory is useful when a design must balance real-time execution with a relatively compact component count. The STM32H753IIK6 is identified specifically as the industrial-temperature K-grade configuration in the STM32H753xI family, with the exact ordering-code interpretation confirmed against the manufacturer documentation before production release.
Typical applications include industrial automation controllers, high-speed embedded data acquisition, audio and digital signal-processing equipment, test and measurement instruments, robotics, and network-connected control systems. In these systems, the 480 MHz Cortex-M7 core can execute control and processing tasks concurrently, while the 2 MB Flash and 1 MB RAM support larger firmware images and working buffers than smaller general-purpose MCUs.
A critical design consideration is the package and power implementation. The 10 mm by 10 mm UFBGA requires a multilayer PCB with short escape routes, appropriate via structures, and assembly-compatible land patterns. Because an embedded MCU can dissipate meaningful heat during sustained high-frequency operation, the board should provide effective copper heat spreading and follow the manufacturer’s recommended power, decoupling, and layout configurations.
This product overview combines the manufacturer’s STM32H753xI family information with exact part-specific memory, frequency, and package characteristics, then adds practical guidance for PCB routing, firmware sizing, thermal design, and drop-in replacement assessment. It is intended to help engineers determine whether the STM32H753IIK6 provides the required balance of processing performance, embedded memory, package density, and ecosystem support.
Alternatif penggantian untuk STM32H753IIK6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32H753IIK6 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Flash Memory, Core, Mounting Type, Maximum CPU Frequency.
STM32H743IIK6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32H750XBH6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32H735IGK6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32H733IIK6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32H743VIK6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM32H753IIK6 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit Arm Cortex-M7 microcontroller |
| Maximum CPU Frequency | 480 MHz |
| Flash Memory | 2 MB (2M x 8) |
| RAM | 1 MB |
| CPU Architecture | 32-bit Arm Cortex-M7 |
| Instruction Set | 32-bit RISC |
| Paket | 176+25 UFBGA (10 mm x 10 mm) |
| Package Height | 0.6 mm |
| Tipe Mounting | Surface mount |
| Communication and Analog Interfaces | 46 communication and analog interfaces |
STM32H753IIK6 0.6 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM32H753IIK6 (0.6 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM32H753IIK6.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM32H753IIK6 cocok untuk 6 aplikasis: Industrial Automation Controllers, High-Speed Data Acquisition, Audio and Digital Signal Processing, Test and Measurement Instruments, Robotics and Motion Control, Network-Connected Edge Equipment.
Industrial Automation Controllers
The STM32H753IIK6 fits industrial automation controllers that combine real-time supervisory logic with increasingly compute-intensive signal processing. Its Arm Cortex-M7 core operates up to 480 MHz, allowing the controller to service control tasks, communication routines, and data preparation from one integrated device. The 2 MB Flash provides substantial room for application firmware, while 1 MB of RAM supports buffers and state management without immediate reliance on external memory. The compact 176+25 UFBGA can also reduce PCB area in distributed control equipment. Deployment still requires validation of industrial temperature limits, supply sequencing, EMC behavior, and long-term availability.
Direkomendasikan
High-Speed Data Acquisition
STM32H753IIK6 is suitable for compact high-speed data-acquisition systems where an acquisition engine, control logic, and communication protocol share one processor. The 480 MHz Cortex-M7 core provides computational capacity for buffering, filtering, and preparing samples, while 1 MB of RAM can hold substantially more working data than a small general-purpose MCU. Its 2 MB Flash is also appropriate for firmware, calibration data, and protocol code. The 10 mm by 10 mm UFBGA helps minimize board footprint, but the design must provide adequate escape routing, clean references for sensitive signals, and verified thermal performance during sustained acquisition.
Direkomendasikan
Audio and Digital Signal Processing
The STM32H753IIK6 is appropriate for embedded audio and digital signal-processing equipment requiring more computation than a conventional control MCU. At up to 480 MHz, the 32-bit Cortex-M7 core can execute filtering, mixing, modulation, and real-time control tasks while supporting a 2 MB firmware region and 1 MB working-memory pool. These resources are useful for configurable sound processors, instrument signal chains, and communication-oriented DSP nodes. Compact UFBGA construction assists equipment miniaturization, but engineers must verify the exact supported peripherals, converter interfaces, memory timing, and thermal limits in the manufacturer device documentation before selecting it.
Direkomendasikan
Test and Measurement Instruments
STM32H753IIK6 can serve as the central controller in portable test and measurement instruments where instrument control, data processing, display management, and communications must share limited board space. The 480 MHz Cortex-M7 core provides throughput for real-time measurement algorithms, while 2 MB of Flash and 1 MB of RAM provide room for instrument firmware, configuration data, and sample buffers. The 176+25 UFBGA package is useful for compact handheld or embedded test systems. A successful design must also address analog isolation, reference accuracy, thermal gradients, calibration storage, and the manufacturer’s recommended power and decoupling arrangements.
Direkomendasikan
Robotics and Motion Control
The STM32H753IIK6 is well suited to compact robotics controllers that combine motion-control loops, sensor processing, and communication within one embedded platform. Its Cortex-M7 core can operate up to 480 MHz, providing capacity for deterministic control algorithms and auxiliary signal processing, while 1 MB of RAM accommodates sensor buffers and control state. The small 10 mm by 10 mm UFBGA package is valuable in space-constrained robotic modules. Final qualification should confirm motor-control peripherals, timer resources, operating-temperature range, supply tolerances, and protection requirements, because those detailed electrical specifications determine suitability for safety-critical motion equipment.
Direkomendasikan
Network-Connected Edge Equipment
STM32H753IIK6 fits network-connected edge equipment that performs local control or protocol processing close to sensors and actuators. The 480 MHz Cortex-M7 core can handle real-time tasks alongside network-stack processing, and the combined 2 MB Flash and 1 MB RAM provide useful capacity for stack configuration, buffering, and application firmware. Its compact UFBGA package supports dense gateway and embedded-module designs. The engineer should confirm the exact Ethernet, USB, security, and peripheral capabilities required by the product, then evaluate boot security, firmware-update strategy, clock accuracy, EMC, and thermal behavior for the deployed environment.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32H753IIK6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32H743IIK6 | STM32H750XBH6 | STM32H735IGK6 | STM32H733IIK6 | STM32H743VIK6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 176+25 UFBGA (10 mm x 10 mm) | 176+25 UFBGA (10 mm x 10 mm) | 176+25 UFBGA (10 mm x 10 mm) | 176+25 UFBGA (10 mm x 10 mm) | 176+25 UFBGA (10 mm x 10 mm) | 176+25 UFBGA (10 mm x 10 mm) |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Controller Family | STM32H753xI | STM32H743xI | STM32H750 | STM32H735 | STM32H733 | STM32H743xV |
Diferensiator Kunci
- High-performance Cortex-M7 processing in a compact package (vsSTM32H743IIK6)
- Exact 2 MB Flash and 1 MB RAM configuration (vsSTM32H743VIK6)
- Targeted H753 family selection for new designs (vsSTM32H735IGK6)
Catatan Desain
Treat the 176+25 UFBGA as a demanding fine-pitch layout task. Route power, ground, and high-use interface nets first, follow the manufacturer-recommended escape pattern, and maintain symmetry around the device. The 10 mm by 10 mm land pattern does not eliminate the need for multilayer routing, but it commonly requires vias within the escape region. Check each layer’s pad and via geometry against the current package drawing and assembly capability before releasing artwork.
Confirm the exact VCAP, supply, power-switching, and ground connections from the manufacturer pin table and power-supply application guidance before laying out the rails. STM32H7 devices use integrated power-management arrangements that make regulator settings and startup behavior device-specific. Place required decoupling capacitors at their designated pins with short current paths, and verify startup sequencing against the firmware and board reset behavior rather than assuming that a different STM32H7 drop-in candidate has identical power requirements.
Estimated: sustained processor activity can produce substantial heat even though the controller has no externally stated power-management IC SOA. If a design consumes approximately 1 W at the device, that value equals 1000 mW; converting it to a practical thermal budget requires the package thermal resistance, board copper area, ambient temperature, and airflow, which are marked as needed rather than assumed. Use the manufacturer power-consumption estimates for the actual clock, memory, and peripheral workload, then provide copper spreading or thermal relief as required.
Do not approve a replacement based only on the 176+25 UFBGA designation. Compare every ball name and power domain, then review boot configuration, clock setup, memory organization, peripheral multiplexing, firmware startup, and development-tool support. STMicroelectronics community guidance specifically highlights power-domain and firmware differences between related STM32 families. A substitution should therefore be recorded as a controlled BOM change with schematic review, firmware regression testing, timing validation, and production traceability.
Informasi Konformitas
The available comparison material references RoHS and REACH status but does not provide the underlying compliance classifications. No specific compliance result should be inferred from that reference alone; confirm the current declarations for the exact ordering code with STMicroelectronics.