STM8L152M8T3 - 16MHz 64KB Low-Power MCU | ST
MPN: STM8L152M8T3 ✓ AktifSTM8L152M8T3 Ringkasan
An ultra-low-power microcontroller is an embedded controller designed to minimize energy consumption during active operation, standby, and low-power modes. Within the product hierarchy, the STM8L152M8T3 is a low-power MCU, an 8-bit microcontroller, and a semiconductor integrated circuit. The STM8 CPU core supports compact control firmware while integrated communication, timing, analog, and LCD-related resources reduce the need for external components.
Verified device attributes include an 8-bit architecture, operation up to 16 MHz, 64 KB of Flash memory organized as 64K by 8 bits, LCD capability, and an 80-pin gull-wing LQFP package. The device also appears with an automotive temperature-grade designation in distributor technical listings. Its 14 mm by 14 mm LQFP package provides 80 accessible leads for analog, digital, communications, clock, debug, and power functions.
The STM8L152M8T3 combines an embedded CPU with resources normally distributed across several discrete components. This integration is valuable when board area, standby consumption, and firmware complexity are important constraints. Exact RAM capacity, operating-voltage limits, individual peripheral ranges, clock-tree details, and converter performance should be confirmed against the manufacturer datasheet before a production schematic is released.
Typical applications include low-energy sensor and metering systems, compact industrial controllers, battery-operated instruments, LCD human-interface panels, low-power communication equipment, and embedded control modules. The 64 KB Flash capacity supports moderate control code, while the large LQFP package exposes substantially more pins than smaller MCU packages for analog and mixed-signal assignments.
Designers should assign every power, ground, decoupling, reset, and debug connection directly from the manufacturer pin-description table. Because this package has 80 leads, manual schematic review is particularly important; verify boot configuration, unused-pin treatment, oscillator connections, and programming access before PCB release.
This product page consolidates manufacturer and distributor information with application guidance, procurement questions, comparison criteria, and design checks that support an engineering decision. The Request a Quote form on this page provides current commercial terms, stock status, and lead-time information without embedding stale pricing into the technical content.
Alternatif penggantian untuk STM8L152M8T3 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM8L152M8T3 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type.
STM8L152M8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM8L152M8T3
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM8L162M8T3
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM8L162M8T6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM8L152M8U6
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
STM8L152M8T3 Rating Maksimal & Karakteristik Listrik
| Product Type | 8-bit ultra-low-power microcontroller |
| CPU Architecture | 8-bit |
| Maximum CPU Clock | 16 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| Paket | 80-pin LQFP, 14 mm x 14 mm |
| Tipe Mounting | Surface mount |
| Terminal Count | 80 pins |
| Terminal Form | Gull wing |
| Package Shape | Square |
| LCD Support | Yes |
| Power Class | Ultra-low-power microcontroller |
| Temperature Grade | Automotive |
STM8L152M8T3 square Diamant Konfigurasi Panduan
Konfigurasi pin untuk STM8L152M8T3 (square pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk STM8L152M8T3.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
STM8L152M8T3 cocok untuk 6 aplikasis: Battery-Powered Sensor Controller, LCD Metering Instrument, Compact Industrial Control Module, Low-Power Communication Equipment, Portable Medical or Wellness Monitor, Smart Home and IoT Actuator Node.
Battery-Powered Sensor Controller
The STM8L152M8T3 fits compact sensor nodes that periodically wake to acquire measurements, process them locally, and return to a low-power state. Its 16 MHz 8-bit core and 64 KB Flash provide enough control capacity for sensor management, data filtering, timers, and communications without requiring a high-power processor. The ultra-low-power MCU family position supports low-energy design, while the 80-pin LQFP exposes ample I/O for digital sensors, status indicators, and local storage. Validate standby current, wake sources, and analog performance against the required duty cycle before finalizing battery-life estimates.
Direkomendasikan
LCD Metering Instrument
The STM8L152M8T3 is appropriate for metering instruments that combine an LCD, low-energy operation, and embedded measurement control. Its LCD capability reduces the need for a separate display controller, while the 64 KB Flash supports firmware for calibration, conversion, event logging, and communications. The 80-pin LQFP provides ample routing capacity for display segments, buttons, reference inputs, and serial interfaces. Select the display glass and segment count by matching the MCU’s supported LCD outputs with the meter’s mechanical and electrical requirements, then confirm contrast, bias, and drive limits in the manufacturer documentation.
Direkomendasikan
Compact Industrial Control Module
The STM8L152M8T3 can serve as the central controller in a compact industrial module that handles discrete inputs, relay or indicator outputs, local timing, and service communications. Its 8-bit architecture and 64 KB Flash are suitable for deterministic supervisory logic, while the large 80-lead package simplifies access to multiple I/O functions compared with smaller MCU packages. The ultra-low-power family designation is useful in systems that spend substantial time idle. Validate industrial temperature requirements, isolation boundaries, transient protection, grounding, and any field-bus timing before using the controller in a deployed machine.
Direkomendasikan
Low-Power Communication Equipment
The STM8L152M8T3 works well as the supervisory controller in low-power communication equipment where a small processor manages configuration, packet handling, status indication, and local diagnostics. At up to 16 MHz with 64 KB Flash, it can support moderate protocol stacks and control firmware while avoiding the memory and power burden of a higher-end application processor. The 80-pin LQFP also provides room for UART, SPI, or I2C-oriented circuitry when those interfaces are present in the selected device configuration. Confirm the exact peripheral mix and clock tree before assigning the communication circuitry.
Direkomendasikan
Portable Medical or Wellness Monitor
The STM8L152M8T3 can support portable monitoring equipment that coordinates sensors, a local display, buttons, and low-rate data logging. Its 8-bit control core and 64 KB Flash are appropriate for measurement sequencing, threshold logic, and status handling, while the LCD capability assists in compact user interfaces. The low-power architecture is valuable for a device intended to operate from a small battery or energy-harvesting source. Medical use requires a separate quality and regulatory assessment; engineers should also verify analog accuracy, noise, timing, and operating-temperature limits for the intended measurement class.
Direkomendasikan
Smart Home and IoT Actuator Node
The STM8L152M8T3 is suitable for smart-home actuator and gateway nodes that must remain responsive while using minimal standby power. Its local control functions can supervise relays, indicators, buttons, and sensors, while 64 KB Flash accommodates communication, diagnostics, and update-aware control logic. The LCD support may also simplify local status displays on premium nodes. For an IoT deployment, evaluate wake latency, radio coexistence, antenna layout, firmware update strategy, and cybersecurity requirements alongside the MCU’s low-power characteristics. Use a hardware secure element when the product threat model requires dedicated key protection.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM8L152M8T3 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM8L152M8T6 | STM8L152M8U6 | STM8L162M8T3 | STM8L162M8T6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 80-LQFP (14x14) | 80-LQFP (14x14) | 80-LQFP (14x14) | 80-LQFP (14x14) | 80-LQFP (14x14) |
| CPU Architecture | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Maximum CPU Clock | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Ordering Suffix | T3 | T6 | U6 | T3 | T6 |
Diferensiator Kunci
- Same 80-LQFP footprint across the qualified candidates (vsSTM8L162M8T6)
- Direct ordering-suffix alternative within the STM8L152M8 family (vsSTM8L152M8T6)
- LCD capability is confirmed for the target and closest family alternative (vsSTM8L152M8T6)
Catatan Desain
Treat the 80-pin LQFP as a connection-checkpoint design. Build the schematic directly from the manufacturer pin-description table, mark every power and ground lead, and verify exposed-pad or thermal requirements against the package drawing. Before routing, create a PCB netlist review that flags duplicate functions, reserved pins, oscillator assignments, and programming signals. This reduces the risk of a package-level error that is difficult to diagnose after fabrication.
Implement the manufacturer’s recommended input, output, and internal supply-decoupling network directly at the associated pins. Keep each capacitor connection short and use the specified voltage and dielectric characteristics. Validate startup, reset, brownout behavior, and load-transient response across the complete input-voltage range rather than relying only on nominal operation. Exact capacitor values and voltage limits must come from the application guidance and device datasheet.
Separate sensitive analog or LCD-related routes from switching nodes and high-current outputs. Match trace geometry for oscillator and communication signals according to the relevant hardware-design guidance, and provide a clear ground-return path beneath sensitive circuitry. Where analog inputs are used, inspect source impedance, acquisition time, and leakage requirements; the 16 MHz CPU does not eliminate the need for correct analog front-end design.
A package-compatible substitute can still fail because of temperature grade, peripheral differences, boot behavior, or firmware register changes. When evaluating STM8L152M8T6, STM8L152M8U6, STM8L162M8T3, or STM8L162M8T6, compare the complete manufacturer pin tables and device order codes. Preserve the target footprint only after checking power, reset, clock, debug, display, communication, and peripheral assignments signal by signal.
Informasi Konformitas
The automotive temperature-grade designation is confirmed by technical listings, but AEC-Q100 qualification and material-compliance declarations were not identified for the exact ordering code. Confirm these statuses in the manufacturer product documentation.
