SY89218UHY - 1.5GHz LVDS Clock Fanout Buffer | Microchip
MPN: SY89218UHY ✓ AktifSY89218UHY Ringkasan
A clock fanout buffer is a clock-management IC that receives one or more timing references and reproduces them across multiple outputs. Its role within the clock and timing hierarchy is to increase fanout capacity, preserve signal phase and timing quality, and distribute clocks to downstream logic. An LVDS clock buffer uses low-voltage differential signaling to provide robust, low-noise transmission between circuit sections while suppressing common-mode noise on PCB interconnects.
The SY89218UHY integrates a 2:1 input multiplexer, four independently controlled output banks, and 15 LVDS outputs. Divide ratios of 1, 2, and 4 allow one reference clock to generate multiple related timing domains. The four banks are phase matched, helping maintain deterministic relative timing among output groups. The 2.5V supply operation is suitable for compact communications systems where a dedicated low-voltage clocking rail is available.
The device can handle input clocks up to 1.5 GHz and provides the fanout needed for parallel links, backplanes, network-interface electronics, and test equipment. Dividing a high-frequency reference before distribution reduces the rate presented to selected downstream circuits while pass-through banks retain the original clock rate. Separate bank control allows different clocking paths to be configured according to system timing requirements.
Use a 64-pin TQFP footprint with an exposed pad and follow the manufacturer's pin-description table when assigning signals. The exposed pad must be connected to the appropriate ground plane, and supply and ground connections should be placed to minimize return-path impedance. LVDS clock pairs require matched routing, with each differential pair kept electrically consistent across PCB layers.
The principal design trade-off is flexibility versus control complexity. Fifteen outputs and four configurable banks simplify multi-destination clock distribution, but every output bank and divider mode must be coordinated with the system clock tree. Validate output timing, reference-clock jitter, return loss, and downstream receiver margins across all supported divider configurations.
This product guide combines the device architecture with practical guidance on clock routing, divider configuration, differential-pair layout, exposed-pad grounding, and application selection. It also distinguishes the electrical function of the SY89218UHY from its ordering and packaging variants, helping engineers evaluate it against precision clock-fanout requirements without relying on a raw distributor listing alone.
Alternatif penggantian untuk SY89218UHY — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifSY89218UHY Spesifikasi
| Product Type | Integrated clock divider and LVDS fanout buffer |
| Tegangan Pemuat | 2.5 V |
| Maximum Input Clock Frequency | 1.5 GHz |
| Input Count | 2 inputs |
| Output Count | 15 LVDS outputs |
| Output Bank Count | 4 independently controlled banks |
| Input Multiplexer Ratio | 2:1 |
| Divider Ratios | Divide by 1, 2, or 4 |
| Output Phase Relationship | Phase-matched output banks |
| Output Signaling | LVDS differential outputs |
| Paket | 64-pin TQFP with exposed pad |
| Tipe Mounting | Surface mount |
| Lead-Free Status | Compliant |
| Status RoHS | ROHS3 compliant |
SY89218UHY 64-pin tqfp with exposed pad Diamant Konfigurasi Panduan
Konfigurasi pin untuk SY89218UHY (64-pin tqfp with exposed pad pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk SY89218UHY.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
SY89218UHY cocok untuk 6 aplikasis: High-Speed Communications Clock Distribution, Parallel Link Interface Clocking, Network Interface Card Clock Tree, Backplane Clock Distribution, Test and Measurement Equipment, Industrial Control and Data Acquisition.
High-Speed Communications Clock Distribution
The SY89218UHY fits communications systems that distribute a common high-speed reference to multiple receiving circuits. It accepts clocks up to 1.5 GHz, selects between two inputs through the integrated 2:1 multiplexer, and provides 15 LVDS outputs for parallel data-path, transceiver, or interface clocking. Its four phase-matched banks allow related clock groups to be routed together while divide-by-1, divide-by-2, and divide-by-4 modes support receivers requiring different clock rates. The principal benefit is consolidation of multiple clock branches into one configurable IC; the design must still allocate pins and controls for every required destination.
Direkomendasikan
Parallel Link Interface Clocking
The SY89218UHY is useful for parallel-link interfaces that require one timing reference to reach several data lanes or associated logic blocks. Fifteen differential outputs provide broad fanout, while four independently controlled banks let closely related destinations share phase-matched clocks. A divide-by-2 or divide-by-4 path can serve slower blocks without requiring a separate divider, and the 1.5 GHz input capability supports demanding source-synchronous arrangements. Designers should use the manufacturer timing tables to verify setup and hold margins for every divider mode and preserve matched routing on all LVDS pairs.
Direkomendasikan
Network Interface Card Clock Tree
The SY89218UHY can support a compact clock tree within a network-interface card by feeding clocks to serializer, transceiver, control, and status logic. Its 2:1 multiplexer gives the board a way to select between two system timing references, while the 15 LVDS outputs eliminate numerous single-purpose fanout stages. Configurable divider banks allow the reference clock to be delivered directly to some blocks and divided for others. The implementation must maintain a continuous return path and consistent differential-pair geometry to preserve signal quality across the card.
Direkomendasikan
Backplane Clock Distribution
The SY89218UHY is applicable where a backplane-based system requires a central low-voltage timing source distributed across multiple line cards. LVDS signaling supports reliable transfer of high-frequency clock signals over controlled PCB interconnects, and the 15 outputs provide sufficient fanout for several destination banks. The phase-matched output groups help maintain known relationships between related clock domains, while divide ratios permit adaptation to subsystems operating at different rates. Signal-integrity work should include return-loss, crosstalk, and jitter analysis across each routed output.
Direkomendasikan
Test and Measurement Equipment
The SY89218UHY can distribute a precision reference clock among acquisition, processing, trigger, and conversion sections of a test system. Its 1.5 GHz input capability handles high-speed test clocks, and the four configurable banks allow selected channels to receive divided versions of the same reference. This reduces duplicated divider circuitry and provides explicit phase-matched groups where deterministic timing is required. Engineers should evaluate reference jitter, additive output jitter, and inter-channel skew for the chosen divider configuration before using the device in precision timing measurements.
Direkomendasikan
Industrial Control and Data Acquisition
The SY89218UHY fits industrial control and data-acquisition equipment that combines high-speed conversion with slower control logic. The 2:1 input multiplexer can select the appropriate timing reference, while divide-by-2 and divide-by-4 outputs can feed lower-rate subsystems alongside pass-through banks. Fifteen LVDS outputs allow the clock network to scale as acquisition channels increase, without distributing a single point-of-load signal over long PCB traces. The exposed-pad package still requires a solid thermal and ground-plane implementation to support reliable operation at 2.5V.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk SY89218UHY — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | SY89218UHY-TR | SY89218U |
|---|---|---|---|
| Product Type | Integrated clock divider and LVDS fanout buffer | Integrated clock divider and LVDS fanout buffer | Integrated clock divider and LVDS fanout buffer |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Supply Voltage | 2.5 V | 2.5 V | 2.5 V |
| Maximum Clock Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Output Count | 15 LVDS outputs | 15 LVDS outputs | 15 LVDS outputs |
| Input Configuration | 2 inputs with 2:1 multiplexer | 2 inputs with 2:1 multiplexer | 2 inputs with 2:1 multiplexer |
| Divider Modes | Divide by 1, 2, or 4 | Divide by 1, 2, or 4 | Divide by 1, 2, or 4 |
| Output Banks | 4 independently controlled phase-matched banks | 4 independently controlled phase-matched banks | 4 independently controlled phase-matched banks |
Diferensiator Kunci
- Combines input selection, four divider banks, and extensive fanout (vsSY89218UHY-TR)
- High-speed multi-output clock distribution in one device (vsSY89218U)
- Selectable timing relationships within one clock tree (vsSY89218UHY-TR)
Catatan Desain
Route every LVDS clock output as a length-matched differential pair with symmetrical geometry and a continuous reference plane beneath the pair. Keep the two conductors of a differential pair on the same PCB layer, avoid stubs, and maintain consistent clearance from unrelated high-speed signals. If a pair changes layers, use a symmetrical transition and review the complete return path to minimize differential skew.
Place the 2.5V decoupling capacitor close to the device's supply pins and provide a low-impedance path to the ground plane. Connect the exposed pad to the recommended ground construction in the package drawing, and avoid placing sensitive clock traces directly above noisy power-conversion circuitry. Verify the final PDN with transient-current and impedance analysis, particularly when outputs switch at high clock rates.
Configure the four output banks and their divide ratios according to the receiver timing requirements, then validate inter-bank skew and output jitter for each configuration. The pass-through, divide-by-2, and divide-by-4 modes create different timing relationships at the outputs. Use the manufacturer's characterization data and receiver setup/hold requirements when determining whether the selected output-bank combination meets the system timing budget.
Informasi Konformitas
Microchip's SY89218U product listing identifies the device as ROHS3 compliant and lead-free. No additional REACH, AEC-Q100, halogen-free, or conflict-minerals status is established.
