Microchip Technology

SY89297UMG - 3.2Gbps Dual-Channel Delay Line | Microchip

MPN: SY89297UMG ✓ Aktif
2.5V or 3.3V Vdss 24-pin QFN with exposed pad Package
MOQ: 1 |

SY89297UMG Ringkasan

The Microchip SY89297UMG is a precision dual-channel programmable delay line operating from a 2.5V or 3.3V supply, with data rates up to 3.2 Gbps and delay steps as small as 5 ps in a 24-pin QFN package. Each independent channel provides a programmable delay range from 2 ns to 7 ns, allowing fine timing adjustment in high-speed communication, clock-alignment, and test systems.

A programmable delay line is a timing IC that inserts a controlled interval between an incoming digital signal and its output. The delay line category belongs to the broader timing-element and clock-and-timing IC hierarchy, where precision delay supports compensation for propagation-time differences, skew management, and deterministic signal alignment. Unlike general-purpose logic-delay circuits, the SY89297UMG combines high-speed data handling with digitally controlled, fine-grained delay adjustment.

Key features include two independent delay channels, a maximum data rate of 3.2 Gbps, 5 ps minimum programmable delay increments, and a 1024-tap delay range. The device supports 2.5V and 3.3V operation and uses a digital configuration interface for programmable settings. These characteristics make it suitable for systems requiring calibrated timing rather than fixed propagation delay.

Each channel can be adjusted independently, allowing two signals to be matched or deliberately offset. The manufacturer describes the delay step as extremely linear and monotonic over the programming range, which supports repeatable timing calibration and predictable control-loop behavior. Its 4 mm by 4 mm 24-pin QFN package also includes an exposed pad for improved thermal coupling on multilayer PCB designs.

Typical uses include high-speed serial-interface timing compensation, clock/data alignment, phase adjustment in communication equipment, delay calibration in automated test systems, and synchronization between independently clocked domains. The dual-channel architecture is especially useful when two related signals must be adjusted together or compared against one another with low setup uncertainty.

Designers should account for the high-speed layout requirements associated with a 3.2 Gbps device. Place input and output decoupling capacitors close to their associated supply and ground pins, provide a continuous return path beneath the exposed pad, and route high-speed differential traces over a stable reference plane with minimized stubs and discontinuities.

This product record combines the manufacturer's timing specifications with package details, application guidance, replacement constraints, and design notes. The key engineering point is that true drop-in replacements must preserve the 24-pin QFN footprint, dual-channel architecture, 5 ps delay granularity, and high-speed electrical behavior rather than merely offering similar programmable-delay functionality.

Alternatif penggantian untuk SY89297UMG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian SY89297UMG (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, Supply Voltage Options.

Microchip Technology
Package: 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Product Type: Programmable delay-line integrated circuit
Supply Voltage Options: 2.5 V or 3.3 V
Bandingkan dengan SY89297UMG →

SY89297U

✅ Drop-In
📦 24-pin QFN with exposed pad
Base-family ordering designation; delay range, 5 ps step, dual-channel architecture, and 3.2 Gbps rate match, with the exact ordering suffix requiring confirmation

📋 Alternatif referensi (tidak dalam katalog)

SY89297UMG Spesifikasi

Product Type Programmable dual-channel delay line IC
Number of Channels 2 independent channels
Maximum Data Rate 3.2 Gbps per channel
Supply Voltage Options 2.5V or 3.3V
Programmable Delay Range 2 ns to 7 ns per channel
Minimum Delay Step 5 ps
Total Delay Span 5 ns
Programmable Taps 1024 taps
Configuration Interface Digital configuration interface
Delay-Line Architecture Dual independent CML delay lines
Paket 24-pin QFN with exposed pad
Package Dimensions 4 mm x 4 mm
Tipe Mounting Surface mount
Output Logic CML

SY89297UMG 4 mm x 4 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk SY89297UMG (4 mm x 4 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 4 mm x 4 mm untuk SY89297UMG

Tidak ada data diatribut pin yang tersedia untuk SY89297UMG.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

SY89297UMG cocok untuk 6 aplikasis: High-Speed Serial Data Alignment, Clock-to-Data Phase Adjustment, Telecom Link Timing Calibration, Automated Test Equipment Delay Correction, Semiconductor ATE Pattern Compensation, Clock Distribution Skew Management.

🌐

High-Speed Serial Data Alignment

The SY89297UMG fits high-speed serial data alignment because each channel supports data rates up to 3.2 Gbps while providing programmable delay from 2 ns to 7 ns. The two independent channels can introduce matched or intentional offsets into related data paths. A 5 ps minimum step provides substantially finer control than a coarse fixed-delay element, while the linear and monotonic programming behavior supports repeatable calibration. In implementation, the device is placed between the source and destination high-speed interfaces, with differential routing, terminations, and exposed-pad grounding controlled according to the manufacturer layout guidance.

🖥️

Clock-to-Data Phase Adjustment

The SY89297UMG is well suited to clock-to-data phase adjustment because it combines two independently programmable channels with a 5 ps minimum delay step. A system can align a forwarded clock relative to associated data or tune the relationship between two timing domains without relying on a coarse analog trim. Its 2 ns to 7 ns adjustment range covers a 5 ns span, while operation to 3.2 Gbps accommodates high-speed interfaces. Board implementation requires short high-speed traces, appropriate source and load terminations, and a stable ground reference beneath the exposed pad.

📡

Telecom Link Timing Calibration

Telecom link timing calibration benefits from the SY89297UMG's dual-channel architecture and 3.2 Gbps maximum data rate. Two independent paths can be measured and adjusted so that transmitter, receiver, or test-fixture delays are balanced with 5 ps programming granularity. The 2.5V and 3.3V supply options also support integration into communications equipment designed around common logic levels. For production use, the calibration system must compensate for temperature-dependent board and component variation and should follow the manufacturer's CML interface, termination, decoupling, and exposed-pad recommendations.

🧪

Automated Test Equipment Delay Correction

The SY89297UMG can compensate fixture and cable-delay variation in automated test equipment that requires deterministic timing near 3.2 Gbps. Its two channels permit reference and measurement paths to be adjusted independently, while the 5 ps step supports fine resolution across a 2 ns to 7 ns range. This capability can reduce timing margins consumed by fixture differences and simplify board-level calibration. The device should be placed near the measured interface to limit trace delay variation, with differential routing, solid reference planes, controlled terminations, and an adequately connected exposed pad.

🔧

Semiconductor ATE Pattern Compensation

In semiconductor automated test equipment, the SY89297UMG can add calibrated delay to high-speed test patterns so that timing relationships remain consistent across load boards and probe cards. Two channels support either differential-path balancing or independent stimulus-and-response timing, and the 3.2 Gbps rate matches high-speed digital test requirements. Fine 5 ps programming increments enable finer compensation than fixed delay networks. Deployment requires a stable reference clock, suitable CML interfacing, controlled board-level impedance, and thermal design that keeps the exposed pad connected to an effective ground region.

⚡

Clock Distribution Skew Management

The SY89297UMG can compensate skew between related clock outputs in systems requiring controlled propagation delay. Because both channels provide independent 2 ns to 7 ns adjustment with 5 ps resolution, a designer can align two forwarded clocks or deliberately establish a known offset. The device operates from 2.5V or 3.3V and supports rates up to 3.2 Gbps, making it appropriate for high-speed clock conditioning and delay calibration. Practical implementation should minimize mismatch between matched routes, maintain continuous return paths, and use the exposed pad as a low-impedance thermal and electrical ground connection.

Ringkasan Produk Direkomendasikan

SY89297U Base family designation of the dual-channel delay line Digunakan di dalam: High-Speed Serial Data Alignment, Clock-to-Data Phase Adjustment, Telecom Link Timing Calibration, Automated Test Equipment Delay Correction, Semiconductor ATE Pattern Compensation, Clock Distribution Skew Management SY89295U Related single-channel delay line for single-path designs Digunakan di dalam: High-Speed Serial Data Alignment, Telecom Link Timing Calibration, Semiconductor ATE Pattern Compensation SY89296U Related single-channel delay-line family member Digunakan di dalam: Clock-to-Data Phase Adjustment, Automated Test Equipment Delay Correction, Clock Distribution Skew Management
What is the Microchip SY89297UMG?
The Microchip SY89297UMG is a dual-channel programmable delay line that supports data rates up to 3.2 Gbps per channel. Each independent channel can be adjusted over a 2 ns to 7 ns range with a minimum delay step of 5 ps. According to the manufacturer datasheet, the device operates from a 2.5V or 3.3V supply and is packaged in a 24-pin QFN with an exposed pad.
What is the delay range and resolution of SY89297UMG?
Each SY89297UMG channel provides a programmable delay from 2 ns to 7 ns, giving a 5 ns total adjustment span. The manufacturer specifies a delay increment as small as 5 ps across 1024 taps and describes the step response as linear and monotonic over the programming range. This resolution is suitable for precise skew compensation and clock-to-data alignment.
Can SY89297UMG operate at 3.2 Gbps?
Yes, the SY89297UMG supports up to 3.2 Gbps through each of its two CML delay channels. The manufacturer identifies it as a DC-to-3.2 Gbps precision dual-channel programmable delay line. Operation at the maximum rate still requires a controlled PCB layout, short return paths, suitable terminations, and compliance with the layout guidance in the manufacturer datasheet.
Where can I download the SY89297UMG datasheet PDF?
The official SY89297UMG datasheet PDF is available through Microchip's device-document link at https://ww1.microchip.com/downloads/en/DeviceDoc/20005835A.pdf. The document covers the 2.5V/3.3V supply options, dual-channel architecture, 3.2 Gbps operation, 5 ps delay increments, programming details, electrical characteristics, and package information.
Where can I find the SY89297UMG pinout?
The SY89297UMG pin assignments are shown in the Microchip manufacturer datasheet at https://ww1.microchip.com/downloads/en/DeviceDoc/20005835A.pdf. The device uses a 24-pin QFN package with an exposed pad, so the pin-description table, exposed-pad connection, and land-pattern guidance should be used together when assigning PCB tracks and ground connections.
What can replace the SY89297UMG?
A genuine drop-in replacement for the SY89297UMG must use the same 24-pin QFN footprint and preserve two independent 5 ps-resolution delay channels with a 2 ns to 7 ns range and 3.2 Gbps operation. The manufacturer family naming indicates that SY89297U refers to the base programmable delay-line device, while SY89297UMG identifies a specific ordering configuration. Confirm the exact orderable suffix and pin compatibility before substitution.
Is SY89297U pin-compatible with SY89297UMG?
The SY89297U is the manufacturer base designation for the same dual-channel 3.2 Gbps programmable delay-line family used by the SY89297UMG. It should be treated as an ordering-code alternative only after confirming the package, temperature range, and ordering suffix. The manufacturer product page and datasheet remain the controlling documents for the final BOM line item.
What is the best Microchip equivalent for SY89297UMG?
The closest manufacturer-supported equivalent is the SY89297U because it denotes the same family of dual-channel, 3.2 Gbps programmable delay lines. The Microchip manufacturer page specifies a 2 ns to 7 ns range per channel with increments as small as 5 ps. Exact suitability still depends on the SY89297UMG ordering suffix, package drawing, temperature grade, and lead-free shipping configuration.
SY89297UMG versus SY89295U and SY89296U: which should be selected?
Choose the SY89297UMG when the design requires two independent delay channels and fine 5 ps programming resolution. The SY89295U and SY89296U are identified by the manufacturer as single-channel delay-line solutions, so they are not direct two-channel drop-in replacements. The SY89297UMG provides 3.2 Gbps operation and a 2 ns to 7 ns range per channel where two synchronized adjustments are required.
When should I choose SY89297UMG over a single-channel delay line?
Choose the SY89297UMG when two signals must be delayed independently or matched to one another within one device. Its two channels each support a 2 ns to 7 ns programmable range with 5 ps steps, reducing the need for two separate delay ICs. A single-channel device may be sufficient when only one timing path requires adjustment and board area is the dominant constraint.
Is the SY89297UMG suitable for clock and data alignment?
Yes, the SY89297UMG is suitable for clock and data alignment because it offers two independently programmable channels, 5 ps delay increments, and a maximum rate of 3.2 Gbps. The linear and monotonic delay behavior described in the manufacturer datasheet supports repeatable calibration. The receiving and driving circuits must still provide compatible logic levels, terminations, and reference-clock requirements.
What PCB layout is required for the SY89297UMG?
The SY89297UMG should be placed with short, impedance-controlled routes for its high-speed differential signals and with the exposed pad connected to a solid ground plane. Decoupling capacitors should be located close to the relevant supply pins. According to the manufacturer datasheet, the 4 mm by 4 mm QFN package and 3.2 Gbps capability require careful return-path and return-loss control.
How should thermal management be handled for SY89297UMG?
Thermal management should center on the exposed pad, which should be connected to a low-impedance ground plane using multiple thermal vias and adequate copper area. The manufacturer's package information identifies the 24-pin QFN construction with an exposed pad for heat removal. Actual junction temperature depends on supply voltage, switching activity, airflow, PCB copper, and the surrounding enclosure.
Where can I buy SY89297UMG and check current availability?
Use the Request a Quote form on this page to request current SY89297UMG availability, lead time, and a quotation. The part is a standard catalog device with a manufacturer datasheet and an exact ordering designation, so procurement should confirm the package suffix, quantity, delivery schedule, and any required traceability documentation before the order is released.
What is the lifecycle status and tooling status of SY89297UMG?
The SY89297UMG is listed by Microchip as a current programmable delay-line product, and the manufacturer provides a dedicated product page and datasheet. Its digital configuration interface is controlled through manufacturer-defined programming methods rather than a general-purpose microcontroller toolchain. Use the linked Microchip product page for the current ordering table, device revision, and programming documentation.

Data referensi engineering untuk SY89297UMG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the SY89297UMG when the design needs two independently adjustable high-speed timing paths with 5 ps delay increments and operation up to 3.2 Gbps. It is especially useful for clock-to-data alignment, matched differential paths, communication-link calibration, and test-fixture delay compensation. Choose SY89297U when the base manufacturer family designation is appropriate for the required package and ordering configuration. Do not substitute SY89295U or SY89296U as direct drop-ins because they are single-channel solutions rather than two-channel replacements. For any alternative, verify the 24-pin QFN footprint, exposed-pad connection, supply options, CML interface, programming method, delay range, and environmental qualification before releasing the design.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini SY89297U
Brand Microchip Technology Microchip Technology
Package 24-pin QFN with exposed pad 24-pin QFN with exposed pad
Number of Channels 2 independent channels 2 independent channels
Maximum Data Rate 3.2 Gbps 3.2 Gbps
Supply Voltage 2.5V or 3.3V 2.5V or 3.3V
Programmable Delay Range 2 ns to 7 ns per channel 2 ns to 7 ns per channel
Minimum Delay Step 5 ps 5 ps
Total Delay Span 5 ns 5 ns
Programmable Taps 1024 taps 1024 taps
Output Logic CML CML

Diferensiator Kunci

  • Two independent channels in one device (vsSY89295U)
  • Fine delay granularity (vsSY89296U)
  • High-speed dual-channel operation (vsSY89297U)

Catatan Desain

Treat the SY89297UMG as a high-speed differential device rather than a general-purpose digital IC. Route both channels with continuous reference planes, avoid stubs and impedance discontinuities, and keep the input and output return paths directly connected to the relevant ground plane. The 3.2 Gbps capability makes small geometry changes significant, so use the package dimensions and land pattern in the manufacturer datasheet when defining the PCB footprint.

Connect the exposed pad to a continuous ground region and add multiple thermal vias where the PCB stack-up and assembly process permit. The exposed pad is the primary path for removing heat from the 24-pin QFN package. Actual junction temperature depends on supply voltage, switching activity, copper area, airflow, and ambient temperature, so thermal performance should be checked across the worst operating condition rather than inferred from package size alone.

Place the required decoupling capacitors adjacent to the corresponding supply and ground pins, keeping input and output high-speed paths separated from sensitive return currents. Use the manufacturer's recommended capacitor values and voltage ratings rather than substituting large capacitors that may impair high-frequency behavior. Because the device supports 2.5V and 3.3V supplies, verify that the selected rail, interface levels, and termination scheme belong to the same operating configuration.

Do not treat the SY89295U or SY89296U as direct substitutes for the SY89297UMG: the manufacturer identifies them as single-channel delay-line solutions, while the SY89297UMG provides two independent channels. Also verify that delay programming is monotonic across the intended operating range and account for temperature, fixture, and PCB variation during calibration. A substitute is acceptable only when the package, pin functions, electrical characteristics, and delay behavior all remain compatible.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product page and datasheet were identified, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not included in the retrieved material. Use the current Microchip product declarations before making a compliance determination.

Pencarian Terkait

SY89297UMG datasheet SY89297UMG specifications SY89297UMG pinout SY89297UMG datasheet pdf SY89297UMG delay range SY89297UMG 5ps delay step SY89297UMG 3.2Gbps delay line SY89297UMG equivalent SY89297UMG replacement SY89297U vs SY89297UMG Microchip SY89297UMG SY89297UMG price SY89297UMG stock SY89297UMG clock data alignment SY89297UMG 24-QFN footprint

Komponen dan Istilah Terkait

Microchip Technology SY89297UMG SY89297U SY89295U SY89296U programmable delay line dual-channel delay line timing element clock and timing IC precision delay programmable clock delay digital configuration interface delay step monotonic delay 3.2 Gbps data rate 5 ps delay resolution CML 24-pin QFN QFN family surface mount exposed pad clock-to-data alignment skew compensation test-fixture calibration high-speed communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ