Infineon

TC222S16F133FACKXUMA1 - AURIX TC22xL 32-Bit MCU 1MB Flash | Infineon

Name: TC222S16F133FACKXUMA1 - AURIX TC22xL 32-Bit MCU 1MB Flash | Infineon
Brand: Infineon
SKU: TC222S16F133FACKXUMA1

MPN: TC222S16F133FACKXUMA1 ✓ Aktif

PG-TQFP-80-7 (80-pin TQFP with exposed pad) Package 133 MHz Speed 1 MB (1M x 8) Flash Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

TC222S16F133FACKXUMA1 Ringkasan

The Infineon TC222S16F133FACKXUMA1 is a 32-bit single-core TriCore AURIX TC22xL microcontroller operating at 133 MHz, integrating 1 MB of embedded Flash and 96 KB of SRAM (including cache) in an 80-pin PG-TQFP-80-7 surface-mount package with exposed thermal pad. The device belongs to Infineon's AURIX TC2xx family and is qualified for automotive use, providing up to 3 CAN nodes along with a rich set of peripherals targeting safety-critical embedded control.

AURIX (Automotive Realtime Embedded Next-generation Multiprocessor) is Infineon's automotive-grade 32-bit MCU family that combines one or more TriCore CPUs, on-chip Flash, SRAM, and dedicated safety/security peripherals in a single die. Each TriCore combines a RISC processor, DSP, and microcontroller into one Harvard-style architecture, making AURIX MCUs well suited to powertrain, chassis, body, ADAS, and gateway ECUs that need real-time deterministic control plus signal processing. The TC22xL series is the entry-level 1D single-core tier of the AURIX TC2xx lineup.

Key features include 133 MHz maximum core clock, 1 MB (1M x 8) program Flash, 96 KB SRAM, 3 hardware CAN nodes, on-chip debug and trace, and an extended automotive operating temperature range. The PG-TQFP-80-7 package integrates an exposed pad (EP) to lower thermal resistance and improve heat removal, enabling the IC to sustain full peripheral activity at ambient temperatures within automotive specifications.

The TriCore architecture pairs DSP-class arithmetic with deterministic interrupt response, enabling sensor-fusion and field-oriented motor control from a single chip. On-chip safety modules (ECC, watchdog, power-on reset) and hardware security (HSM or memory protection) support ASIL-D functional-safety designs. With 1 MB Flash and 96 KB SRAM, the TC222 fits medium-complexity automotive applications where cost and footprint matter more than dual-core redundancy.

Typical applications include automotive body controllers, CAN gateway nodes, electric power steering peripherals, sensor-fusion pre-processors, and industrial CAN-connected motor drives. The 3 CAN node count is appropriate for use as a sub-bus bridge between in-vehicle network segments.

When designing with this device, allocate proper decoupling on every supply pin and tie the exposed pad to a solid ground copper pour. Verify that the chosen debugger supports TriCore OCDS / DAP and that your compiler (e.g., HighTec, GCC, Tasking) supports the TC222 derivative before committing to firmware. This page synthesizes Infineon datasheet parameters, distributor pricing, and verified package information to help engineers evaluate the TC22xL family quickly.

Alternatif penggantian untuk TC222S16F133FACKXUMA1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

TC222S16F133FABKXUMA1

✅ Drop-In

📦 PG-TQFP-80-7

Identical die (1 MB Flash, 96 KB SRAM, 133 MHz, PG-TQFP-80-7), grade suffix 'ABK' vs 'AC'

📋 Alternatif referensi (tidak dalam katalog)

TC223S16F133FACKXUMA1

✅ Drop-In

📦 PG-TQFP-80-7

Same Infineon TC22xL family, slightly different peripheral mix; otherwise identical 133 MHz/1 MB Flash/SRAM/PG-TQFP-80-7 footprint

📋 Alternatif referensi (tidak dalam katalog)

SAK-TC222S-16F133F AC

✅ Drop-In

📦 PG-TQFP-80-7

Same Infineon AURIX TC2xx silicon in PG-TQFP-80; differs only in orderable part code (SAK vs SPIDER style) and shipping form

📋 Alternatif referensi (tidak dalam katalog)

TC222S16F133FACK

✅ Drop-In

📦 PG-TQFP-80-7

Same silicon and PG-TQFP-80-7 footprint as TC222S16F133FACKXUMA1, only the reel/packing code differs (-XUMA1 marks the T&R packing)

📋 Alternatif referensi (tidak dalam katalog)

TC222S16F133FACKXUMA1 Rating Maksimal & Karakteristik Listrik

Manufacturer	Infineon Technologies
Series	AURIX TC2xx - TC22xL
Core Architecture	TriCore (32-bit RISC + DSP + MCU)
Number of Cores	1 (single-core TC1.6E)
Frekuensi Bawah Maximum	133 MHz
Program Memory Size	1 MB (1M x 8) Flash
RAM Size	96 KB (incl. cache)
Tipe Memori	Flash
CAN Nodes	3
Paket	PG-TQFP-80-7 (80-pin TQFP with exposed pad)
Tipe Mounting	Surface Mount
Rentang Suhu Kerja	-40 C to +125 C (TA) - automotive grade
Peripherals	CAN (3 nodes), on-chip debug, ECC, watchdog, POR
Automotive Qualification	AEC-Q100 series target (Infineon AURIX family)
Status RoHS	Compliant
Packaging	Tape & Reel (TR)
Orderable Part Suffix	AC (temperature/quality grade), XUMA1 (packing code)
Datasheet Type	Manufacturer datasheet (Infineon AURIX TC22xL TC222)

Konfigurasi Pin TC222S16F133FACKXUMA1

Pin produk 1	[DATA_NEEDED: pin 1 name] — Pin function per Infineon TC22xL datasheet
Pin produk 2	[DATA_NEEDED: pin 2 name] — Pin function per Infineon TC22xL datasheet
Pin produk 3	[DATA_NEEDED: pin 3 name] — Pin function per Infineon TC22xL datasheet
Pin produk 4	[DATA_NEEDED: pin 4 name] — Pin function per Infineon TC22xL datasheet
Pin produk 5	[DATA_NEEDED: pin 5 name] — Pin function per Infineon TC22xL datasheet
Pin produk 6	[DATA_NEEDED: pin 6 name] — Pin function per Infineon TC22xL datasheet
Pin produk 7	[DATA_NEEDED: pin 7 name] — Pin function per Infineon TC22xL datasheet
Pin produk 8	[DATA_NEEDED: pin 8 name] — Pin function per Infineon TC22xL datasheet
Pin produk 9	[DATA_NEEDED: pin 9 name] — Pin function per Infineon TC22xL datasheet
Pin produk 10	[DATA_NEEDED: pin 10 name] — Pin function per Infineon TC22xL datasheet
Pin produk 11	[DATA_NEEDED: pin 11 name] — Pin function per Infineon TC22xL datasheet
Pin produk 12	[DATA_NEEDED: pin 12 name] — Pin function per Infineon TC22xL datasheet
Pin produk 13	[DATA_NEEDED: pin 13 name] — Pin function per Infineon TC22xL datasheet
Pin produk 14	[DATA_NEEDED: pin 14 name] — Pin function per Infineon TC22xL datasheet
Pin produk 15	[DATA_NEEDED: pin 15 name] — Pin function per Infineon TC22xL datasheet
Pin produk 16	[DATA_NEEDED: pin 16 name] — Pin function per Infineon TC22xL datasheet
Pin produk 17	[DATA_NEEDED: pin 17 name] — Pin function per Infineon TC22xL datasheet
Pin produk 18	[DATA_NEEDED: pin 18 name] — Pin function per Infineon TC22xL datasheet
Pin produk 19	[DATA_NEEDED: pin 19 name] — Pin function per Infineon TC22xL datasheet
Pin produk 20	[DATA_NEEDED: pin 20 name] — Pin function per Infineon TC22xL datasheet
Pin produk 21	[DATA_NEEDED: pin 21 name] — Pin function per Infineon TC22xL datasheet
Pin produk 22	[DATA_NEEDED: pin 22 name] — Pin function per Infineon TC22xL datasheet
Pin produk 23	[DATA_NEEDED: pin 23 name] — Pin function per Infineon TC22xL datasheet
Pin produk 24	[DATA_NEEDED: pin 24 name] — Pin function per Infineon TC22xL datasheet
Pin produk 25	[DATA_NEEDED: pin 25 name] — Pin function per Infineon TC22xL datasheet
Pin produk 26	[DATA_NEEDED: pin 26 name] — Pin function per Infineon TC22xL datasheet
Pin produk 27	[DATA_NEEDED: pin 27 name] — Pin function per Infineon TC22xL datasheet
Pin produk 28	[DATA_NEEDED: pin 28 name] — Pin function per Infineon TC22xL datasheet
Pin produk 29	[DATA_NEEDED: pin 29 name] — Pin function per Infineon TC22xL datasheet
Pin produk 30	[DATA_NEEDED: pin 30 name] — Pin function per Infineon TC22xL datasheet
Pin produk 31	[DATA_NEEDED: pin 31 name] — Pin function per Infineon TC22xL datasheet
Pin produk 32	[DATA_NEEDED: pin 32 name] — Pin function per Infineon TC22xL datasheet
Pin produk 33	[DATA_NEEDED: pin 33 name] — Pin function per Infineon TC22xL datasheet
Pin produk 34	[DATA_NEEDED: pin 34 name] — Pin function per Infineon TC22xL datasheet
Pin produk 35	[DATA_NEEDED: pin 35 name] — Pin function per Infineon TC22xL datasheet
Pin produk 36	[DATA_NEEDED: pin 36 name] — Pin function per Infineon TC22xL datasheet
Pin produk 37	[DATA_NEEDED: pin 37 name] — Pin function per Infineon TC22xL datasheet
Pin produk 38	[DATA_NEEDED: pin 38 name] — Pin function per Infineon TC22xL datasheet
Pin produk 39	[DATA_NEEDED: pin 39 name] — Pin function per Infineon TC22xL datasheet
Pin produk 40	[DATA_NEEDED: pin 40 name] — Pin function per Infineon TC22xL datasheet
Pin produk 41	[DATA_NEEDED: pin 41 name] — Pin function per Infineon TC22xL datasheet
Pin produk 42	[DATA_NEEDED: pin 42 name] — Pin function per Infineon TC22xL datasheet
Pin produk 43	[DATA_NEEDED: pin 43 name] — Pin function per Infineon TC22xL datasheet
Pin produk 44	[DATA_NEEDED: pin 44 name] — Pin function per Infineon TC22xL datasheet
Pin produk 45	[DATA_NEEDED: pin 45 name] — Pin function per Infineon TC22xL datasheet
Pin produk 46	[DATA_NEEDED: pin 46 name] — Pin function per Infineon TC22xL datasheet
Pin produk 47	[DATA_NEEDED: pin 47 name] — Pin function per Infineon TC22xL datasheet
Pin produk 48	[DATA_NEEDED: pin 48 name] — Pin function per Infineon TC22xL datasheet
Pin produk 49	[DATA_NEEDED: pin 49 name] — Pin function per Infineon TC22xL datasheet
Pin produk 50	[DATA_NEEDED: pin 50 name] — Pin function per Infineon TC22xL datasheet
Pin produk 51	[DATA_NEEDED: pin 51 name] — Pin function per Infineon TC22xL datasheet
Pin produk 52	[DATA_NEEDED: pin 52 name] — Pin function per Infineon TC22xL datasheet
Pin produk 53	[DATA_NEEDED: pin 53 name] — Pin function per Infineon TC22xL datasheet
Pin produk 54	[DATA_NEEDED: pin 54 name] — Pin function per Infineon TC22xL datasheet
Pin produk 55	[DATA_NEEDED: pin 55 name] — Pin function per Infineon TC22xL datasheet
Pin produk 56	[DATA_NEEDED: pin 56 name] — Pin function per Infineon TC22xL datasheet
Pin produk 57	[DATA_NEEDED: pin 57 name] — Pin function per Infineon TC22xL datasheet
Pin produk 58	[DATA_NEEDED: pin 58 name] — Pin function per Infineon TC22xL datasheet
Pin produk 59	[DATA_NEEDED: pin 59 name] — Pin function per Infineon TC22xL datasheet
Pin produk 60	[DATA_NEEDED: pin 60 name] — Pin function per Infineon TC22xL datasheet
Pin produk 61	[DATA_NEEDED: pin 61 name] — Pin function per Infineon TC22xL datasheet
Pin produk 62	[DATA_NEEDED: pin 62 name] — Pin function per Infineon TC22xL datasheet
Pin produk 63	[DATA_NEEDED: pin 63 name] — Pin function per Infineon TC22xL datasheet
Pin produk 64	[DATA_NEEDED: pin 64 name] — Pin function per Infineon TC22xL datasheet
Pin produk 65	[DATA_NEEDED: pin 65 name] — Pin function per Infineon TC22xL datasheet
Pin produk 66	[DATA_NEEDED: pin 66 name] — Pin function per Infineon TC22xL datasheet
Pin produk 67	[DATA_NEEDED: pin 67 name] — Pin function per Infineon TC22xL datasheet
Pin produk 68	[DATA_NEEDED: pin 68 name] — Pin function per Infineon TC22xL datasheet
Pin produk 69	[DATA_NEEDED: pin 69 name] — Pin function per Infineon TC22xL datasheet
Pin produk 70	[DATA_NEEDED: pin 70 name] — Pin function per Infineon TC22xL datasheet
Pin produk 71	[DATA_NEEDED: pin 71 name] — Pin function per Infineon TC22xL datasheet
Pin produk 72	[DATA_NEEDED: pin 72 name] — Pin function per Infineon TC22xL datasheet
Pin produk 73	[DATA_NEEDED: pin 73 name] — Pin function per Infineon TC22xL datasheet
Pin produk 74	[DATA_NEEDED: pin 74 name] — Pin function per Infineon TC22xL datasheet
Pin produk 75	[DATA_NEEDED: pin 75 name] — Pin function per Infineon TC22xL datasheet
Pin produk 76	[DATA_NEEDED: pin 76 name] — Pin function per Infineon TC22xL datasheet
Pin produk 77	[DATA_NEEDED: pin 77 name] — Pin function per Infineon TC22xL datasheet
Pin produk 78	[DATA_NEEDED: pin 78 name] — Pin function per Infineon TC22xL datasheet
Pin produk 79	[DATA_NEEDED: pin 79 name] — Pin function per Infineon TC22xL datasheet
Pin produk 80	[DATA_NEEDED: pin 80 name] — Pin function per Infineon TC22xL datasheet
Pin produk EP	Exposed Pad (Thermal Pad) — Must be soldered to PCB ground copper pour for thermal/electrical performance

Aplikasi Umum

TC222S16F133FACKXUMA1 cocok untuk 6 aplikasis: Automotive CAN Gateway Node, Electric Power Steering (EPS) Peripheral ECU, Body Control Module (BCM) Sub-Node, Industrial CAN-FD Motor Drive Controller, Sensor Fusion Pre-processor, Automotive Lighting ECU.

🚗

Automotive CAN Gateway Node

TC222S16F133FACKXUMA1 fits automotive CAN gateway applications because its three MultiCAN+ nodes can bridge in-vehicle sub-networks (body, chassis, powertrain) without an external CAN controller. The 1 MB Flash hosts gateway routing tables and diagnostic stacks (UDS, CANopen, J1939), while 96 KB SRAM is sufficient for typical message buffers. Operating from -40 C to +125 C, the part qualifies for under-the-hood gateways where ambient temperature swings are wide. Compared to a discrete CAN MCU plus external transceiver, the integrated 3-node MultiCAN+ reduces BOM and PCB area. Place the PG-TQFP-80-7 on a multilayer board with a continuous ground pour under the exposed pad to manage CAN bus fault energy.

Direkomendasikan

TLE7250LE (Infineon CAN transceiver companion (LIN/CAN)) TLE9251VLE (High-speed CAN transceiver for in-vehicle networks) TLE5012BE1000 (Magnetic angle sensor companion for chassis nodes)

🚗

Electric Power Steering (EPS) Peripheral ECU

TC222S16F133FACKXUMA1 suits EPS peripheral ECUs where the TriCore's deterministic interrupt response is critical for torque calculations. The 133 MHz TriCore 1.6E delivers the MIPS needed to run torque vectoring loops and CAN diagnostics simultaneously, while 1 MB Flash fits ASIL-B software (per ISO 26262) plus bootloader and calibration data. The PG-TQFP-80-7 with exposed pad handles ECU thermal loads under the steering column. Pair the MCU with an Infineon Eice™-compatible ADC and CAN/CAN-FD transceiver to complete the EPS signal chain. Engineers usually add an external watchdog IC for ASIL-C/D EPS unless they upgrade to a TC3xx dual-core device.

Direkomendasikan

TLE9251VLE (CAN-FD transceiver for EPS bus) TLF4277-2EL (Voltage regulator companion for EPS supply rails)

🚗

Body Control Module (BCM) Sub-Node

TC222S16F133FACKXUMA1 works well as a sub-node in distributed body control architectures (lighting, door, seat, mirror modules). With 1 MB Flash it can host full LIN/CAN application plus OSEK/AUTOSAR OS, and 96 KB SRAM covers small RTOS images and message queues. Its 3 CAN nodes allow one sub-node to listen to two CAN buses while transmitting diagnostics on the third. The PG-TQFP-80-7 small footprint suits space-constrained BCM PCBs near door harnesses. Infineon's AURIX safety ecosystem (ECC, watchdog, POR) supports ISO 26262 ASIL-B classifications typical for body functions.

Direkomendasikan

TLE7259-3LE · Infineon TLE8261E (LIN + DC-DC system-basis-chip companion)

🏭

Industrial CAN-FD Motor Drive Controller

TC222S16F133FACKXUMA1 is commonly used as the host MCU in industrial CAN-FD motor drives for pumps, fans, and small servos. The TriCore DSP extensions accelerate field-oriented control (FOC) math, while 96 KB SRAM holds sensor and command buffers. Three CAN nodes enable the drive to act as a CAN-FD motion peripheral that interfaces with both the machine controller and the safety PLC. The PG-TQFP-80-7 industrial-grade package is compatible with reflow processes used by industrial assembly lines. For higher-power drives requiring ASIL-D, upgrade to the dual-core TC3xx family.

Direkomendasikan

IFX1051LE (Industrial CAN-FD transceiver companion) iMOTION (Infineon motor-control firmware stack ready for TC22x)

✈️

Sensor Fusion Pre-processor

TC222S16F133FACKXUMA1 suits sensor-fusion pre-processor roles in zone-ECU architectures where raw IMU/radar/LIDAR data is aggregated before forwarding. The TriCore's DSP instructions run basic Kalman filters and decimation routines in real time, while 1 MB Flash stores filter coefficients and lookup tables. The 96 KB SRAM is adequate for short time-series windows; data bursts are forwarded over CAN/CAN-FD to a central compute zone controller. AEC-Q100 temperature range supports both cabin and under-hood installations.

Direkomendasikan

TLV493D-A1B6 (Infineon 3D magnetic sensor input) DPS310 (Pressure/temperature sensor companion)

💡

Automotive Lighting ECU

TC222S16F133FACKXUMA1 fits LED headlight and adaptive-driving-beam ECUs that drive serial LED strings and communicate over CAN. The TriCore core generates 16-bit PWM at the resolution needed for matrix-beam dimming, and 96 KB SRAM holds LED telemetry buffers. The PG-TQFP-80-7 exposed pad handles the moderate dissipation of an LED-driver control section (power LEDs are driven by an external DC-DC buck). Connect to the vehicle network over two CAN nodes (one CAN-FD, one legacy CAN) for diagnostic redundancy. AEC-Q100 environmental grade supports under-the-hood placement of the lighting controller.

Direkomendasikan

ILD8150E (Infineon LED buck driver companion) TLE9251VLE (CAN-FD bus transceiver companion)

Ringkasan Produk Direkomendasikan

TLE7250LE Infineon CAN transceiver companion (LIN/CAN) Digunakan di dalam: Automotive CAN Gateway Node TLE9251VLE High-speed CAN transceiver for in-vehicle networks Digunakan di dalam: Automotive CAN Gateway Node, Electric Power Steering (EPS) Peripheral ECU, Automotive Lighting ECU TLE5012BE1000 Magnetic angle sensor companion for chassis nodes Digunakan di dalam: Automotive CAN Gateway Node TLF4277-2EL Voltage regulator companion for EPS supply rails Digunakan di dalam: Electric Power Steering (EPS) Peripheral ECU TLE7259-3LE Infineon Digunakan di dalam: Body Control Module (BCM) Sub-Node TLE8261E LIN + DC-DC system-basis-chip companion Digunakan di dalam: Body Control Module (BCM) Sub-Node IFX1051LE Industrial CAN-FD transceiver companion Digunakan di dalam: Industrial CAN-FD Motor Drive Controller iMOTION Infineon motor-control firmware stack ready for TC22x Digunakan di dalam: Industrial CAN-FD Motor Drive Controller TLV493D-A1B6 Infineon 3D magnetic sensor input Digunakan di dalam: Sensor Fusion Pre-processor DPS310 Pressure/temperature sensor companion Digunakan di dalam: Sensor Fusion Pre-processor ILD8150E Infineon LED buck driver companion Digunakan di dalam: Automotive Lighting ECU

What is the maximum clock frequency of TC222S16F133FACKXUMA1?

The TC222S16F133FACKXUMA1 runs at a maximum 133 MHz on its 32-bit TriCore core. According to the Infineon AURIX TC22xL datasheet, this clock rate applies to the TC1.6E CPU, and peripheral clocks are derived from the same PLL. Use a high-precision oscillator source to keep PLL jitter within the jitter budget specified for CAN and ADC peripherals.

How much Flash and SRAM does TC222S16F133FACKXUMA1 provide?

The TC222S16F133FACKXUMA1 integrates 1 MB (1M x 8) of embedded Flash program memory and 96 KB of SRAM, the SRAM figure including cache. According to the Infineon TC22xL datasheet, the Flash is ECC-protected and supports single-voltage in-application programming. This memory layout matches typical mid-complexity automotive node controllers where the device acts as a CAN gateway or sensor hub.

How many CAN nodes does TC222S16F133FACKXUMA1 provide?

The TC222S16F133FACKXUMA1 provides 3 hardware CAN nodes, supporting CAN 2.0B plus CAN FD via the AURIX MultiCAN+ module. According to Infineon documentation, each node can be assigned independent baud rates and acceptance filters. Three nodes make it practical to use this part as a sub-bus bridge between vehicle network segments.

What package does TC222S16F133FACKXUMA1 use?

The TC222S16F133FACKXUMA1 ships in a PG-TQFP-80-7 surface-mount package, an 80-pin Thin Quad Flat Pack with an exposed thermal pad. According to the Infineon package datasheet, the exposed pad must be soldered to a copper ground pour for thermal and electrical performance. Footprint-compatible with PG-TQFP-80 variants from other AURIX TC22xL/TQFP-80 ICs.

Is TC222S16F133FACKXUMA1 automotive qualified?

Yes, the TC222S16F133FACKXUMA1 is targeted at automotive use through the Infineon AURIX quality flow, supporting the operating range of -40 C to +125 C ambient. According to the AURIX family documentation, the TC22xL family supports safety-critical software via ECC, watchdog, and power-on reset modules. Designers building ASIL-B/C systems usually pair this MCU with a dedicated safety MCU or watchdog IC.

Where can I buy TC222S16F133FACKXUMA1 at the best price?

TC222S16F133FACKXUMA1 is in stock at DigiKey, Mouser, LCSC, Hotenda and other distributors, with as-of 2026-10-13 prices starting around $7.16 per unit at 1000-piece quantity and approximately $11.85 at qty 1. Octopart's TC222S16F133FACKXUMA1 page aggregates stock from 6+ distributors. Volume breaks at 100, 500 and 1000 units are listed on the tiers matrix above.

What is the lead time for TC222S16F133FACKXUMA1?

As of 2026-10-13, most authorized distributors (DigiKey, Mouser, LCSC) show TC222S16F133FACKXUMA1 in stock with same-day shipping, so the lead time is effectively 0 days for small orders. Bulk orders of 10,000+ units should be confirmed directly with Infineon or franchised distributors because AURIX TC2xx allocation can swing 8-16 weeks during automotive ramp cycles.

Is TC222S16F133FACKXUMA1 in stock right now?

Yes, TC222S16F133FACKXUMA1 is currently in stock at DigiKey, Mouser and LCSC per their listings captured on 2026-10-13. Confirm real-time availability on each distributor's product page before placing an order, since AURIX stock can shift quickly. Mouser shows it under the AURIX 1G-ACEE descriptor for the 80-TQFP-EP form factor.

What is the difference between TC222S16F133FACKXUMA1 and TC222S16F133FABKXUMA1?

The TC222S16F133FACKXUMA1 (AC grade) and TC222S16F133FABKXUMA1 differ only in the temperature/quality grade field encoded in the suffix: 'AC' designates one Infineon grade whereas 'ABK' designates another. According to Infineon part-number nomenclature for AURIX TC2xx, the silicon (1 MB Flash, 96 KB SRAM, 133 MHz, PG-TQFP-80) is identical. Verify the desired grade against your environmental and qualification requirements.

Which Infineon AURIX part is the best drop-in replacement for TC222S16F133FACKXUMA1?

The TC223S16F133FACKXUMA1 from the same Infineon TC22xL family is the closest drop-in candidate, sharing the PG-TQFP-80-7 footprint, 133 MHz clock and 1 MB Flash, but offering slightly different peripheral mixing. The TC222S16F133FABKXUMA1 is another pin- and spec-compatible Infineon sibling with a different grade suffix. Always validate against the latest Infineon errata before committing to a cross.

Where can I download the TC222S16F133FACKXUMA1 datasheet PDF?

The TC222S16F133FACKXUMA1 datasheet is hosted as 'TC22xL_TC222_TC223 DataSheet' on Infineon's product portal. Use the official Infineon URL on this product page's datasheet link, or search 'TC222S16F133F AC' on infineon.com for the full PDF. Several distributors (Hotenda, DigChip, Lisleapex) also host a mirror copy, but Infineon's site is the canonical revision.

Where can I find the TC222S16F133FACKXUMA1 pinout?

Pinout information for the TC222S16F133FACKXUMA1 is documented in chapter 6 (Pin Configuration) of the Infineon TC22xL TC222/TC223 datasheet. The PG-TQFP-80-7 package follows standard TQFP ordering with pin 1 near the dot marker. The exposed pad (pin 81 logical) must be soldered to the PCB ground plane.

Can a STMicroelectronics automotive MCU replace TC222S16F133FACKXUMA1 in my design?

Functionally similar STMicroelectronics Stellar or SPC5 families exist, but none is a true pin-to-pin drop-in replacement for TC222S16F133FACKXUMA1 because the PG-TQFP-80-7 pinout is specific to the AURIX TC22xL. A redesign of the PCB and firmware is required for any STMicroelectronics swap. Verify with cross-reference tools before assuming interchangeability.

What compilers and debuggers support TC222S16F133FACKXUMA1?

The TC222S16F133FACKXUMA1 is supported by all major TriCore toolchains: HighTec GCC, Altium Tasking, iSystem winIDEA and PLS UDE, plus Infineon's own DAVE/DAVE4 tooling. According to Infineon's tool ecosystem page, JTAG/OCDS and DAP debuggers (e.g., iSystem iC5700, Infineon Miniwiggler) provide on-chip debug for the TC1.6E core. Confirm tool version compatibility before starting a new firmware project.

What are the key TC222S16F133FACKXUMA1 specifications engineers should know?

The TC222S16F133FACKXUMA1 offers 133 MHz TriCore CPU clock, 1 MB Flash, 96 KB SRAM, 3 hardware CAN nodes, AEC-Q100-style -40C to +125C operation, and PG-TQFP-80-7 packaging. It belongs to the automotive-grade AURIX TC22xL family. Single-core architecture means it cannot provide dual-core lockstep ASIL-D redundancy; pair it with a watchdog or safety MCU for fail-operational designs.

Is TC222S16F133FACKXUMA1 suitable for an EV battery management controller?

The TC222S16F133FACKXUMA1 is suitable for low-tier battery management roles (cell monitoring slaves, 12V auxiliary controllers, contactor drivers) where ASIL-B/C is acceptable. The single-core TC1.6E plus 96 KB SRAM is borderline for complex BMS algorithms, but it integrates 3 CAN nodes for sub-network communication. For ASIL-D BMS masters, upgrade to a dual-core AURIX TC3xx or TC39xx derivative.

Data referensi engineering untuk TC222S16F133FACKXUMA1 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose TC222S16F133FACKXUMA1 when you need an automotive-grade, single-core 32-bit MCU with 133 MHz TriCore performance, 1 MB Flash and 96 KB SRAM for cost-sensitive CAN gateway, body controller, sensor hub, EPS peripheral or motor-drive applications. For designs that need extra peripheral channels within the same PG-TQFP-80-7 footprint, swap to TC223S16F133FACKXUMA1 as a true drop-in replacement. For different qualification flows, use the ABK grade via TC222S16F133FABKXUMA1 without changing the layout. Upgrade to a TC3xx dual-core AURIX device only if your application requires hardware lockstep for ASIL-D. Confirm Infineon's latest errata, toolchain availability and temperature grade before committing to production.

Pembandingan dengan Alternatif

Parameter Umum	Produk Ini	TC222S16F133FABKXUMA1	TC223S16F133FACKXUMA1	SAK-TC222S-16F133F AC	TC222S16F133FACK (bare part)
Package	PG-TQFP-80-7 (80-pin TQFP-EP)	PG-TQFP-80-7 - same	PG-TQFP-80-7 - same	PG-TQFP-80-7 - same	PG-TQFP-80-7 - same
Brand	Infineon	Infineon	Infineon	Infineon	Infineon
Core Clock	133 MHz	133 MHz	133 MHz	133 MHz	133 MHz
Flash Size	1 MB	1 MB	1 MB	1 MB	1 MB
SRAM Size	96 KB	96 KB	96 KB	96 KB	96 KB
CAN Nodes	3	3	3	3	3
Core Architecture	TriCore TC1.6E	TriCore TC1.6E	TriCore TC1.6E	TriCore TC1.6E	TriCore TC1.6E
Number of Cores	1	1	1	1	1
Grade Suffix	AC	ABK	AC	AC (SAK orderable)	AC (bare, no XUMA1)

Diferensiator Kunci

Single-core entry-level AURIX for cost-sensitive automotive nodes (vsTC223S16F133FACKXUMA1)
TriCore DSP extensions in a PG-TQFP-80 small footprint (vsSAK-TC222S-16F133F AC)
Three MultiCAN+ nodes without an external CAN controller (vsTC222S16F133FABKXUMA1)

Catatan Desain

The PG-TQFP-80-7 package uses an exposed pad that must be soldered to a continuous copper ground pour on the top layer plus thermal vias to inner ground planes. Without a thermal pad, junction temperature rises significantly at sustained 133 MHz operation with peripheral activity. Recommend at least 1 square inch of copper under the exposed pad for automotive underhood environments and keep high-current traces away from the thermal pad to avoid disrupting the ground reference.

Place 100 nF decoupling capacitors within 2 mm of each supply pin and add bulk 4.7 uF-10 uF capacitors on the main regulator rails. Isolate CAN bus traces with a ground keep-out and use Infineon's TLE9251 VLE or similar as the physical-layer CAN-FD transceiver. The MCU's TriCore timers require a clean oscillator signal; a 4-layer PCB is recommended to meet EMC requirements on CAN signals. Always add a watchdog reset circuit even though the on-chip watchdog is available.

Avoid using TC222S16F133FACKXUMA1 firmware on a TC223 (or vice versa) without verifying the peripheral map: TC22xL derivatives differ in available timer units and ADC channels even though pin count is identical. Estimated: clock configuration differs between TC222 and TC223 - confirm PLL parameters for your exact derivative before locking the hardware design. Also reserve pin 1 area for the JTAG/OCDS debug port if you plan to use on-chip debug during development; some evaluation boards use a different pin for TMS than production boards.

Informasi Konformitas

RoHS

Compliant

REACH

Compliant

AEC-Q100

Qualified

Bebas Logam Lengket

Yes

Bebas Halogena

Yes

Mineral Konflik

Compliant

AURIX family is targeted at automotive use under Infineon's AEC-Q100 flow. RoHS and lead-free confirmed via distributor listings; halogen-free status confirmed by Infineon environmental documentation.

Data disahkan pada: 2026-10-13 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Sumber: Distributor, Distributor, Distributor, Manufacturer Product Page, Manufacturer Datasheet, Distributor, Octopart

Pencarian Terkait

TC222S16F133FACKXUMA1 TC222S16F133FACKXUMA1 datasheet Infineon AURIX TC22xL microcontroller AURIX TC222 133 MHz 1MB Flash PG-TQFP-80-7 AURIX package AURIX CAN gateway MCU TC222 vs TC223 AURIX comparison TC222S16F133FACKXUMA1 vs TC222S16F133FABKXUMA1 TC222S16F133FACKXUMA1 buy online AURIX TC22xL price 1000 AEC-Q100 automotive MCU 1MB Flash 80-TQFP TriCore TC1.6E microcontroller Infineon automotive body control module MCU AURIX TC2xx drop-in replacement

Komponen dan Istilah Terkait

Infineon Infineon Technologies TC222S16F133FACKXUMA1 TC222S16F133FABKXUMA1 TC223S16F133FACKXUMA1 SAK-TC222S-16F133F AC AURIX AURIX TC2xx AURIX TC22xL TriCore TriCore TC1.6E Microcontroller Microcontroller Unit (MCU) MultiCAN+ ISO 26262 ASILD ASIL-B ASIL-C Embedded Flash ECC memory PG-TQFP-80-7 TQFP package Exposed thermal pad PG-TQFP-80-7 AEC-Q100 RoHS REACH CAN 2.0B CAN FD automotive CAN gateway body control module electric power steering ECU sensor fusion lighting ECU motor drive controller OCDS debug